Used Vacuum Compressor for sale (6,776)

Condition: used, Year of construction: 2018, machine/vehicle number: D18451643, used vacuum pump Busch MM 1104 BP O2 for sale, YOM: 2018 Manufacturer: Busch, Vacuum Pumps and Systems Model: Mink MM 1104 BP O2 S/N: D18451643 MFG: 2018 New air filter Nominal pumping speed: 62 m³/h Ultimate pressure: 60 hPa (mbar) Nominal motor speed: 1800 min-1 Noise level (ISO 2151): 71 dB(A) Weight approx.: 155 kg Dimensions (L x W x H): 1080 x 430 x 590 mm Gas inlet / outlet: G 1 ¼" / G 1" (NPT) Max pressure: 1,2 - 2.0 bar (17-29 psi) Motor: 2.2 – 3.2 kW (3.0 HP), 3-phase, 230/460 V, 60 Hz Lubrification: dry/oil-free Cooling: air-cooled Description: The Busch Mink MM 1104 BP O2 is a specialized, industrial-grade dry claw compressor and vacuum pump. The "BP" designation stands for overpressure/pressure variants, while the "O2" specification denotes it is configured specifically for handling oxygen-enriched gases. 1. The Rotary Claw Pumping Principle The core of the pump consists of two claw-shaped rotors mounted on parallel shafts inside a synchronized pumping chamber. Synchronized Counter-Rotation: The rotors turn in opposite directions. Their movement is precisely synchronized by a timing gear drive located in a separate, sealed gear housing. Contactless Operation: As the claws rotate, they pass incredibly close to each other and the interior cylinder wall, maintaining tight tolerances measured in fractions of a millimetre. However, they never actually touch. Internal Compression: As the claws roll past the inlet port, gas is drawn into the expanding chamber. As rotation continues, the volume between the claws is trapped, compressed mechanically by the geometric shape of the rotors, and then forced out through the discharge port. Because there is zero friction or mechanical wear inside the pumping chamber, the pump requires no internal lubrication. This yields an entirely oil-free exhaust gas stream. 2. Engineering Architecture: The "BP" Designation The BP (Back Pressure / Overpressure) variant modifies the internal geometry and sealing profile of the standard Mink platform. Dual-Function Flexibility: While traditional vacuum pumps exhaust directly to atmospheric pressure, BP variants are built with heavy-duty casings and specialized shaft seals. This allows them to operate as both low-pressure compressors and high-differential vacuum pumps. Variable Pressure Handling: They can safely discharge gas into a pressurized manifold system (up to standard rated overpressures, usually around 2.0 to 2.5 bar absolute) without suffering from seal failure or overheating. 3. Materials & Thermodynamics of the "O2" Variant Hjdpfx Akezz Tm Rs Ujnu Pumping high-purity or enriched oxygen (O₂ > 21%) presents severe thermal and chemical hazards. Standard industrial pumps will trigger a catastrophic flash fire if compressed oxygen reacts with hydrocarbon lubricants or friction points. The O2 variant incorporates specific thermodynamic and chemical isolation measures: Gearbox Lubricant: PFPE (Perfluoropolyether) synthetic fluid. It is chemically inert and completely non-reactive with pure oxygen. Price: 3.290 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Drehschieber-Druck-/Vakuumpumpen, trockenlaufend / Rotary vane pressure/vacuum pumps, oil-free Druck- & Vakuumpumpe / Pressure & Cacuum Pump Becker DVT 3.100 Baujahr / Year 2013 - Serial-No. D 2760035 Volumenstrom 50 Hz / Volume flow 50 Hz 103 m³/h Leistung 50 Hz  /Power 50 Hz 5,5 kW Hnodpfx Ajyx H I Eok Usu Schallpegel 50 Hz / Noise Level 50 Hz    76…77 dB(A) Gewicht / Weight +/- 95kgs Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Druck- und Vakuumkompressor / Pressure and Vacuum Compressor Becker DVT 3.60 trockenlaufend / oil-free Baujahr / Year 2015 - SN. D 2953819 60 m3/h Volumenstrom 50 Hz / Volume flow 50 Hz -  58 m³/h Druck/Vakuum relativ 50 Hz    / Pressure/Vacuum relative 50 Hz - ±0,6 bar Hnsdpovk R I Uofx Ak Uju Leistung 50 Hz / Power 50 Hz - 3,0 kW Schallpegel 50 Hz / Noise Level 50 Hz - 74…75 dB(A) Volumenstrom 60 Hz / Volume flow 60 Hz - 69 m³/h Druck/Vakuum relativ 60 Hz    / Pressure/Vacuum relative 60 Hz - ±0,6 bar Leistung 60 Hz / Power 60 Hz - 3,6 kW Schallpegel 60 Hz / Noise Level 60 Hz - 75…76 dB(A) Gewicht / Weight - 47 kg ohne Motor (without Motor) Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, functionality: fully functional, Ferwood Code: RU0009658 - Manufacturer Code: G-BH12BH1610-7HH36-Z - Condition: Used - Functionality: Fully functional - Weight: 65KG - Dimensions: 120X80X60 - If interested we offer overhaul service, please contact us. Hnedpsu H Ib Iofx Ak Usu

Condition: new, Vacuum compressor 16000 L - 1000 RPM - reconditioned Hsdpfx Ajz S Dnxjk Usnu Condition: New

Condition: used, Year of construction: 1997, Henkovac H 1000 – Industrial Vacuum Packaging & Sealing Machine (1997) The Henkovac B.V. H 1000, manufactured in 1997, is a robust industrial vacuum packaging and sealing machine designed for high-volume food processing environments. Built for reliability and durability, it is ideal for commercial kitchens, food processors, and manufacturing lines that require hygienic, efficient, and consistent vacuum packaging. Key Features: - Heavy-Duty Vacuum Packaging: Securely evacuates air from packages, extending product shelf life and maintaining quality. - Reliable Sealing: Ensures airtight seals for a variety of food products, including meats, cheeses, and prepared meals. - Industrial-Grade Construction: Designed for continuous operation in demanding food processing environments. - Versatile Application: Suitable for vacuum packaging of different types and sizes of food products. Hnedpfx Aeyudxxsk Uou - Long-Term Reliability: Proven design ensures dependable performance even after decades of use. - User-Friendly Operation: Controls and interface designed for efficient workflow in industrial kitchens. Technical Highlights: - Manufacturer: Howden Food Equipment B.V. - Model: H 1000 - Year of Manufacture: 1997 - Machine Type: Industrial vacuum packaging and sealing machine - Applications: Food processing, commercial packaging, shelf-life extension Whether for high-volume production lines or specialized food processing tasks, the H 1000 delivers professional vacuum sealing performance, combining durability, hygiene, and reliability. More photos and full specifications: / * Manufacturer: Henkovac * Model: H 1000

Condition: ready for operation (used), Year of construction: 2014, functionality: limited functionality, The Pfeiffer OnTool DryPump PDP100, with serial number 53005526 is an oil-free, multi-stage dry vacuum pump manufactured in November 2014. Manufacturer: Pfeiffer Vacuum Type: OnTool DryPump Serial Number: 53005526 Year of Construction: 11/2014 Electrical Requirements: 230 V, 3 Phase, 50/60 Hz Weight: 121 kg (approx. 267 lbs) Hnedjz E Sgnjpfx Ak Uou Operation: Oil-free dry compression, commonly water-cooled for stable temperature control in industrial or semiconductor environments. Multi-stage roots vacuum pumps from Pfeiffer Vacuum+Fab Solutions operate with precisely engineered lobes that do not come into contact with each other or the housing. This design eliminates the need for lubricants in the compression chamber, ensuring dry and oil-free vacuum generation, which makes multi-stage roots vacuum pumps the perfect choice for a wide range of applications requiring clean vacuum such as semiconductor manufacturing, vacuum coating or chemical and pharmaceutical processes. Price 5.500 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila.

Condition: used, Year of construction: 2018, The Airtec ATC 7.5 Hnsdpfxezf Ivuj Ak Usu Screw compressor and air dryer Heavy-duty industrial compressor. Specifications Year 2018 Motor Power: 7.5 KW (10HP) Maximum Pressure: 8 bar Free air delivery 1.1 m3/min Tank Capacity Options: 500 Litres Power Requirements: 3-Phase Electric Pump Type: Belt-driven, cast-iron piston

Condition: like new (used), Kaeser M30 PE screw compressor on a trailer The unit is in perfect condition, like new. The unit was purchased from a warehouse and has never been used. Only 50 hours of operation. Technical specifications: Operating pressure: 7 bar 18.2 kW motor Automatic start Capacity: 3 m3/min Hodpfxozz Hilo Ak Uenu Weight: 595 kg Year of manufacture: 2022/12

Condition: used, machine/vehicle number: 008704, Overall length: 3435 mm Hnedpfjzq Urysx Ak Uou Overall width: 1100 mm Suction capacity: 5750 m3/h No of Filter sleeves: 60

Condition: used, machine/vehicle number: 008705, Overall length: 2099 mm Hnsdpfx Akozq Utdo Uou Overall width: 1138 mm No of Filter sleeves: 16

Condition: like new (used), functionality: fully functional, Graham Vacuum Pump DF/SCH00058 Type: 2 067/180 20006 171 ID no 12320594/1 Hjdsznpagepfx Ak Uonu Unused, ex stores stock. Unit was purchased as a spare, but never used.

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Hnedoy Iplfspfx Ak Usu Very little use Ex Pharma Facility

Condition: used, Year of construction: 2008, operating hours: 13,000 h, functionality: fully functional, Pfeiffer Vacuum GmbH Turbomolecular pump with electronic drive unit, ProfibusDP gateway and accessories, PM P03 020 GA, TPH 2101 P + TIC 250 Model Turbomolecular Pump: PMP03020G, TPH2101P Model Gateway: TIC250 Turbo molecular pump: Serial number: 14219214 YoM: 2008 Nominal connection size inlet: DN 250 ISO-K Nominal connection size outlet: DN 40 ISO-KF Flood connection: G1/8" Rated speed: 31.500/min (525Hz) Pumping speed N2: 1.900l/s Max. Prevacuum pressure N2: 1,5mbar Hsdponcd S Ujfx Ak Uonu Max. Prevacuum pressure He: 1,0mbar Max. Prevacuum pressure H2: 0,5mbar Oil: PM 016 144-T Note on condition: 1. statements on the operation hour time is about 13,000h with about 1,600 start-up and shut-down. 2. process gases: nitrogen and argon 3. process dusts: chromium nitrite and steel 100Cr6 4. the pump was stored fully functional in 2018 and externally cleaned.

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete YOM 1991 Hnodpfxoyb Sdio Ak Uou Made in Germany Good working condition

Condition: excellent (used), For sale: FEZER pump. The pump is in very good condition. Hsdpoz Saw Rjfx Ak Ujnu - Flow rate: 16 m3/h

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Equipment: documentation/manual, refrigerant dryer, type plate available, Container includes the following contents: - 10ft storage container, new / Color: Anthracite grey - SSC-Strong 37 Vario • Speed-controlled screw compressor • Free air delivery at 8 bar: 6.3 m³/min • Dimensions (LxWxH): 1432 x 1000 x 1480 mm • Weight: 705 kg - 2 compressed air tanks, 500 l each o With AD2000 certification o Horizontal design - 2 Ecomat 31 condensate drains Hodpfx Akjxc T Evo Uenu - 2 sets of fittings - SCC refrigerant dryer DRA480 o ISO 8573-1 Class 4 o Refrigerant: R407C o Capacity: 480 m³ - Pre-filter FIL934-P - Fine filter FIL934-M The compressor has seen very little use and therefore has low operating hours. Upon request, we can read the operating hours and run the compressor for demonstration.

Condition: used, Year of construction: 1988, This Flottmann mobile construction compressor, model: Flottair 639, will be auctioned online as part of our industrial auction / machinery auction due to the business closure of Sammet Wohn- und Gewerbebau GmbH – including construction machinery, containers, building materials, and much more. You can find this and many other items on our platform. Hsdpfx Akez Sx Igo Uenu

Condition: excellent (used), Offer consisting of: complete compressed air system comprising SCC Flexi 55kW screw compressor, air-cooled, SCC DRA 480 refrigerant dryer, only about 2000 load hours, compressed air tank 1000 litres (OKS brand), year of manufacture: 2021 Hsdjyl S Ebspfx Ak Ujnu

Condition: used, Pfeiffer Pfeiffer Vacuum HLT 560 Helium Leak Detector Professional leak testing, sniffing & vacuum operation with pre-pump: Vacuubrand MV 10 NT (max. approx. 10–11 m³/h) Description: For sale is a professional Pfeiffer Vacuum HLT 560 helium leak detector. The device is designed for highly precise leak testing using helium and is typically used in industry, manufacturing, quality assurance, laboratories, and technical service. It is suitable for the reliable detection of even the smallest leaks. The HLT 560 operates using mass spectrometry and can be used in both vacuum and sniffing modes. With the sniffing probe, leak locations can be precisely identified, while in vacuum mode, complete assemblies or systems can be tested. The turbo pump and pre-pump are integrated, making the device usable as a complete, mobile testing system. Hnsdszix Hxjpfx Ak Uou Application areas (examples): Leak testing of components and assemblies Testing of vacuum chambers, pipelines, valves, heat exchangers Quality control in production Service and maintenance work on vacuum equipment Technical data: Manufacturer: Pfeiffer Vacuum Model: SmartTest HLT 560 Manufacturer: Pfeiffer Vacuum Integrated turbo pump Pre-pump: Vacuubrand MV 10 NT (max. approx. 10–11 m³/h) Measuring gas: Helium Measuring principle: Mass spectrometric helium leak detection Operating modes: Vacuum mode / Sniffing mode Reference leak rate: (7.4 ±15 %) × 10⁻⁷ mbar·l/s Dimensions (approx.): Height: 110 cm Width: 50 cm Depth: 60 cm Interfaces: RS232, RS485, Relay I / II, Gauge connection Power supply: 230 V / 50 Hz Power consumption: approx. 400 VA Weight: approx. 70 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), Cooling compressor Hodpfx Akeyb Rquj Ujnu Stal KTK 207 25-33 Bar YOM 1991 Good condition Dimensions (LxWxH): 4700x2200x1450 mm

Condition: used, This listing is for a Biotek Instruments Vacuum pump 2 The unit is in full working condition and is ready for immediate release. BioTek Instruments GAST Vacuum Pump 7103034 Overview The BioTek Instruments GAST Vacuum Pump 7103034 is a high-performance, oil-less rocking piston compressor and vacuum pump designed for use with a variety of microplate washers, including the EL 406, 405 TS, 405 LS, and ELx405. Key Features Standard Vacuum Pump: Ideal for a wide range of applications. Oil-less Rocking Piston Compressor: Ensures outstanding performance and durability. Flexibility and Durability: Suitable for various laboratory settings. Easy to Retrofit: Simple installation and integration with existing systems. Low Exhaust Temperatures: Reduces the risk of overheating and extends the pump's lifespan. Longer Life Span: Built to last, minimizing the need for frequent replacements. Voltage: Operates at 115-230V. Max Vacuum: 26 in -hg. Sound Level: Less than 65 db(A). Product Information Compressor Type: Standard Vacuum Pump Port Size: 1/4 in NPT End Connections: NPT Phase: Single Maximum RPM: 1725 RPM; 1425 RPM Minimum Working Temperature: 5°C Maximum Working Temperature: 40°C Hodpjxwc I Njfx Ak Ujnu Standards: CE; UL For Use With: 405 ls, 405 touch, el406, elx405 microplate washers Voltage: 115 - 230V Sound Level: Less than 65 db(A) Max Vacuum: 26 in -hg Specifications Weight Metric: 11.34 kg Imperial: 25 lb Dimensions Metric: 35.56 cm x 25.4 cm x 33.02 cm Imperial: 14 in x 10 in x 13 in Harmonized Code: 84141000 Harmonized Code Details: Vacuum pumps; liquid ring vacuum pumps and other rotary positive displacement pumps Availability eBay: This vacuum pump is listed on eBay with free shipping for many products. Sellers typically respond within 24 hours to assist with any inquiries or specific configurations.

Condition: like new (used), functionality: fully functional, Year of construction: 2020, SmartLift SL 608 HL RT Outdoor, like new ! No rental machine. Hedpfxozz Sq Uj Ak Ujnu High Lifter, Rotation Head

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 30 kg, total length: 33 mm, total width: 40 mm, total height: 130 mm, operating pressure: 2 bar, final pressure: 2 bar, warranty duration: 24 months, Pneumatic Vacuum Liquid Filling Machine – Constant Fill Level Hnsdpfxsrivxys Ak Ueu This vacuum liquid filling machine operates fully pneumatically and requires no electricity. A small compressor is sufficient to operate the machine. Thanks to the vacuum-controlled constant-level filling principle, each bottle is filled to exactly the same liquid level, regardless of bottle volume variations. This ensures a consistent and professional final result. Compact, Lightweight, and Durable The machine is manufactured entirely from high-grade stainless steel, is compact in design, lightweight, and takes up little space. It is easy to place on a workbench, making it ideal for both production and testing environments. Versatile Applications Suitable for filling both small and larger volumes of liquid products, including: - Water - Perfume - Milk - Eye drops - Oils (such as sesame oil) - Beverages - Alcohol - And similar liquids Efficient Operation The machine is equipped with two filling heads, allowing for continuous operation. Depending on the operator and bottle volume, up to approximately 20 bottles per minute can be filled. Contact & Delivery For questions or further information, please feel free to contact us by email or telephone. Transport within and outside Europe is possible.

Condition: used, 800040V1444, T1600, Oerlikon Leybold, turbomolecular vacuum pump Hnsdpsvrgdzjfx Ak Uou