Used Screw Jacks for sale (6,678)

Condition: used, Spindle lifting gear, linear drive, linear gear, lifting gear, spindle lifting element, spindle drive, electric actuator, valve drive, actuator, servo motor, strapping machine, packaging machine, strapping machine, skinpack machine, wrapping machine, winding machine, spindle lifting gear for stretch wrapping system -Manufacturer: SITI, screw jack from packaging machine ILAPAK Astra-STD -Gearbox: Type MI 30 H9 -Shaft: Ø 20 x 270 mm -Motor: ICME 0.09 kW -Dimensions: 395/265/H120 mm -Weight: 7.0 kg Hedsu Npfaspfx Af Dspa

Condition: used, Year of construction: 2009, Manufacturer: H&G Model: HG/SV 11 Weight: 1800 kg Engine power: 11 kW Hpedpfx Aex Hyfyof Dea

Condition: good (used), Bookbinding screw press 50×40 on a base The device is fully functional, ready to work. Format 500×400 mm Pressure 5t Hedpfxewud Sas Af Dspa

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. Hpsdpfx Asxur Sfjf Dja FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Screw Conveyor Hpsdpshfdviefx Af Dsa Custom made conveyor Overall dimensions: 3500 x 900 x 2600 mm Screw dimensions: diam. 150 x 2700 mm

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! Hedpjwclabjfx Af Depa *Installation and Operator Training FREE • Model: FABO HY-800 • Type: Double Helix Screw Washer • Capacity: 80 ton per hour • Dimension: 1750 x 8650x1900 mm • Screw Size: Ø 800x8000 mm • Motor: 2 x 15 kW Heavy duty Gamak • Water Consumption: 65-230 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 2003, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h Hsdpfehabk Dsx Af Depa -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg

Condition: excellent (used), Year of construction: 2013, operating hours: 18,281 h, functionality: fully functional, Kaeser SM12 screw compressor, 7.5 kW, with 8 bar and 1.20 m3/min. Excellent condition. Hjdpfx Asx Hyykef Depa

Condition: used, Used Hosokawa model 35-MSC-44 nauta conical double screw mixer. - Working volume: 3125 litre. - Working pressure: Atmospheric. - Product contact parts: Stainless steel 1.4301. - Cone has dimensions (approx.): 2334 mm diameter x 3366 mm cone height / 4609 mm total height (bottom edge of discharge valve - drive). - Top semi-circular covers: 1x hinged cover with safety mesh, 1x bolted cover with man way and flange DN400 - Non-supported screw agitators (double screw design): driven by 11 kW, 1500 rpm, 400 V electric motor, final rpms of screws 70 rpm - Arm: driven by 1.1 kW, 1500 rpm, 400 V electric motor, final rpms of arm 0.82 rpm - Lump breaker: driven by 5.5 rpm, 1500 rpm, 400 V - Includes: inspection doors at the bottom of cone (approx. 800 mm height x 500 mm wide at the top / 250 mm wide at the bottom), discharge valve. - Mounted: (3) lugs. Hedpfx Asx H Sg Nsf Djpa

Condition: used, Year of construction: 2013, Main vessel / jacket: 2140 L / 87 L … ATM / -1; +3 bar … 120 °C. Motor: 134–1500 rpm, 7.5 kW. Material: 316L stainless steel. Defect on the screw – it needs to be ground or replaced. The 8 mm tolerance can no longer be maintained. Hpodpfx Asx E S Tgjf Dja

Condition: used, Year of construction: 1998, feed pressure 8,5 bar liter capacity . l total power requirement 454 kW Hedpfxsx Edwue Af Depa

Condition: good (used), Year of construction: 2006, Screw compressor MARK Type: MAS 7,5KW Year 2006 Power 7,5KW Pressure : 10 Bar Dimensions: L100cm X W 62 cm X H 105 cm Weight: 215 KG Ready to use condition. Hpjdpfx Afjtx Aknj Dja

Condition: good (used), Year of construction: 2008, Mono pump, dosing pump, high-pressure pump, water pump, screw pump, progressive cavity pump -Pumps: for tunnel boring -Adjustable speed: 120-600 rpm Hpodsb A Igmjpfx Af Dsa -Drive: 5.5 kW -Speed: 20-220 rpm -Pump capacity: 80-100 l/min -Max. pressure: 16 bar -Pipe connection diameter: DN 100 -Dimensions: 3900/470/H1070 mm -Weight: 722 kg

Condition: like new (used), Year of construction: 2010, operating hours: 2,434 h, functionality: fully functional, Screw compressor GA18VSDFF. Integrated dryer and frequency converter. 18.5 kW. 13 bar. 3.60 m3/min. Only 2,434 operating hours. Hpodpfjx Hyxgox Af Dsa

Condition: used, Used stainless steel twin screw cooling conveyer by AMF (Apener Maschinenbau und Forderanlagen Gustav Bruns GmbH & Co KG) model HDS 250 x 3500. Machine has two stainless steel screws with total length 3500 mm and working length about 3000 mm. Screws are driven by el motor 1.1 kW and reducer. Working rotation of screws up to 2.7 rpm. Each screw has a internal channel and is connected to cooling medium. Working pressure inside the shafts - up to 1.5 bar, temperature range from -10C up to +30C, volume - 2 x 18 l. Screws are working in jacketed tank. Width of tank 570 mm x length 3500 mm. Tank has volume about 430 l and is working on atmospheric pressure. Temperature range from -10 up to 0C. Tank has stainless steel jacket at bottom and side walls. Volume of jacket 40 l, working pressure up to 1.5 bar, working temperature range - from -10C up to +30C. Top of the tank is equipped with 3 stainless steel lids, each with lenght 90 cm. Cover under the section where discharge is located is equipped with inspection manway with diameter 30 cm and stainless steel round lid. Inlet to conveyer has dimensions: 30 cm x 55 cm. Outlet has dimensions 28 cm x 30 cm. Machine has local control panel and is mounted on 4 wheels. Last time used in food industry. Hedox Hwd Hjpfx Af Depa

Condition: used, Year of construction: 2016, 80 nominal tons, high efficiency (refrigerant R-134a, global warming potential GWP 1430). Equipped with 2 UPS systems, buffer tank and heat exchanger mounted on a skid, as well as 2 ventilated cooling towers each with 6 fans. Hpjdpfxjx E S Nzs Af Dsa

Year of construction: 2010, condition: good (used), 3.piece ball screw ( from HURON BAZ ) make SCHNEEBERGER Diameter 63 mm Diameter 50 mm Diameter 40 mm In good condition. Hpodpfoh I T Nrex Af Dsa

Condition: good (used), Screw clamps with shaft, pipe clamps, pipe fastening -DN: 10/12 -DN: 20/22 -DN: 25/28 -DN: 50/55 -DN: 65/70 -DN: 80/85 -DN: 100/102 Price: complete Hpodpfx Afeb A Sl Se Dsa Package weight: 11.5 kg

Condition: like new (used), Year of construction: 2022, operating hours: 1,965 h, functionality: fully functional, Used compressor Kaeser SK25T 15 kW with 11 bar and 2.11 m³/min. Year of manufacture 2022 with only 1965 operating hours. Integrated dryer. Hpsdpfx Afjx Hywpe Dsa

Condition: good (used), Screw clamps, pipe clamps, pipe fixings -DN: 20/22 -DN: 25/28 -DN: 32/34 -DN: 40 -DN: 50/52 -DN: 65/70 Hsdeb A Sl Rjpfx Af Djpa Price: complete Package weight: 21.5 kg

Condition: good (used), Ball screw with nut, transfer roller screw, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod Manufacturer: Rexroth Type: R150257086 -Type: 69115 40H -Thread diameter: 48 mm -Thread pitch, two-stage: 20 mm Hpjdecp Anpopfx Af Dea -Total length: 1995 mm -Weight: 26 kg

Condition: good (used), Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, -Adjustment via trapezoidal thread -Adjustment range: 295 - 530 mm Quantity: 1 piece Hedpfx Afscxuqcj Dopa -Weight: 9 kg

Condition: good (used), Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, Hpjdpfxjcxuqks Af Doa -Adjustment: via trapezoidal thread -Adjustment range: 120 - 175 mm -Price: for all 2 pieces -Weight: 4 kg

Condition: good (used), Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, fixings, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: 10 pieces, for machine tools and systems -Dimensions: see photos Hpsdpfjx Exz Rsx Af Dja -Submission/Price: complete -Transport dimensions: 440/210/H255 mm -Total weight: 24.4 kg

Condition: good (used), Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, fixings, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: 2 pieces, for machine tools and systems Hpodpsx Exvhsfx Af Dja -Minimum height: 280 mm -Max. height: 468 mm -Submission/Price: complete -Dimensions (each): 220/190/H280 mm -Weight: 9.9 kg/piece