Used Screw Jacks for sale (6,542)

Condition: excellent (used), Year of construction: 2022, Wangen Twin NG70 Screw Pump Nwedpfx Aijzt Ibgjujk 2022, Stainless, designed to reliably pump low to high viscous, volatile or gaseous products and for applications where maximum hygiene and efficiency is required. The hygienic pump for food and beverages, chemicals and cosmetics. With touch screen HMI screen controls, all on mobile stainless skid, 3Ph

Condition: excellent (used), Year of construction: 2006, operating hours: 8,482 h, functionality: fully functional, Screw compressor, Kaeser DSD281 160 kW Nodpfxozwgz To Aiuewk 10 bar 23.50 m³/min Year of manufacture: 2006 Operating hours: 8,482 h

Condition: excellent (used), Year of construction: 2016, operating hours: 22,314 h, functionality: fully functional, Oil-free screw compressor, Atlas Copco ZT55VSD Nwsdpfx Aezwdt Tsiusk Inverter integrated 55 kW 8.6 bar 8.55 m³/min Year of manufacture: 2016 Operating hours: 22,314 h

Condition: good (used), Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, -Adjustment via trapezoidal thread -Adjustment range: 295 - 530 mm Njdpscxuqcsfx Aiuewk -Quantity: 1 piece -Weight: 9 kg

Condition: new, AGRE ALUP SCK 10-10 270+ Belt-driven. Space-saving. Cost-effective. Easy to operate. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Refrigerant dryer installed. Sound-insulated screw compressor with belt drive on a 270 l compressed air tank, with integrated refrigerant dryer, integrated cyclone separator, electronic condensate drain, and C55 graphic control. Njdpfxjixt H Ns Aiuewk Features in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled Drive: Efficient IE3 motor, belt drive Control: Fixed speed Controller: Aircontrol 5.0 Refrigerant dryer: Mounted, refrigerant R513A Filtration: Incl. cyclone separator Tank: Horizontal, painted, manufactured according to AD2000 Performance data: Volume flow at operating pressure 9.5 bar = 1.06 m³/min Operating pressure min. / max. 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load 10.2 kW Rated motor power; IP55 7.5 kW Oil quantity 4 liters Dimensions and weight: L x W x H = 1530 x 662 x 1531 mm Weight: 310 kg Compressed air outlet: G 1/2'' Compressed air tank capacity: 270 liters

Condition: new, Screw compressor AGRE Model Sonetteo 7.5+ 10 Compact screw compressor unit including refrigerant dryer and compressed air tank, 270 liters. Belt-driven. Space-saving. Economical. Easy operation thanks to the Infologic² Basic control system. Efficient compression stage. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Refrigerant dryer installed. Detailed features: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Control system: Infologic² Basic control unit Nwedpfjhun Tzex Aiuek Refrigerant dryer: Installed, refrigerant R513A Tank: 270 liters, horizontal, painted, 11 bar Motor power: 5.5 kW Pressure: 10 bar Delivery rate: 780 liters/min Including time-controlled condensate drain Dimensions L x W x H = 1500 x 1350 x 600 mm

Condition: used, Year of construction: 2009, operating hours: 73,000 h, functionality: fully functional, power: 75 kW (101.97 HP), pressure (min.): 4 bar, pressure (max.): 10 bar, ambient temperature (max.): 46 °C, type of cooling: air, Equipment: documentation/manual, type plate available, Product description: GA75P A 10 APB 400 50 Product number: 00000402 | 8152811462 Date of manufacture: 09/30/2009 Model: GA75_08 Nodpfx Aozvqp Sjiuewk Product description: GA 75 Brand: Atlas Copco Cooling: Air-cooled (AIR) Electrical approval: IEC (IEC) Energy recovery: Yes (Y) Frequency: 50 Hz (50HZ) Model variant: Workplace (W) Pressure Vessel Approval: CE / ASME (CEASME) Regulation: Elektronikon Graphic (MK5GRAPH) Starter type: Star/Delta (Y/D) (YD) Supply voltage: 400 V (400V) Working pressure: 10 bar (10BAR) Ex works with integrated heat recovery. Current operating hours: approx. 73,000 hours Used machine, sold as is, without warranty.

Condition: used, Year of construction: 2015, operating hours: 49,800 h, functionality: fully functional, power: 75 kW (101.97 HP), pressure (min.): 4 bar, pressure (max.): 9.8 bar, ambient temperature (max.): 46 °C, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Product description: GA75FF A 10 APB 400 50 Product number: 0000090580 | 00000502 | 8153587723 Date of manufacture: 19/03/2015 Model: GA75_12 Product description: GA 75 Brand: Atlas Copco Air receiver mounted / Floor mounted (N) Brand: Atlas Copco (01ATLAS_CO) Commercial power: 75 kW (75KW) Cooling: Air cooled (AIR) Electrical approval: IEC (IEC) Element family: Oil Injected Screw (OIS) Energy recovery: Yes (Y) Frequency: 50 Hz (50HZ) Integrated dryer: Yes (Y) Mk5 expansion module: Yes (Y) Model variant: Workplace Full Feature (W_FF) Pressure vessel approval: CE / ASME (CEASME) Product company: API (API) Regulation: Elektronikon standard (MK5STD) Starter type: Star/Delta (Y/D) (YD) Supply voltage: 400 V (400V) Njdpfx Aiozvqpfsuewk Working pressure: 10 bar (10BAR) Ex works, the machine is already equipped with the following special equipment: - Integrated refrigerant dryer - Integrated heat recovery - Expansion module Current operating hours: approx. 49,800 hours Used machine, sold as is, without warranty.

Condition: used, Year of construction: 2011, operating hours: 122,000 h, functionality: fully functional, power: 75 kW (101.97 HP), pressure (min.): 4 bar, pressure (max.): 12.5 bar, ambient temperature (max.): 46 °C, noise level: 70 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Product description: GA75VSDFF A 13 APB 400 50 Product number: 8152400050 | 0000090680 | 00000614 | 00000602 Date of manufacture: 23/06/2011 Cooling: Air-cooled (AIR) Electrical approval: IEC (IEC) Energy recovery: Yes (Y) Frequency: 50 Hz (50HZ) Integrated dryer: Yes (Y) Njdszvqixspfx Aiuewk Mk5 expansion module: Yes (Y) Model variant: Workplace Full Feature (W_FF) Oil-containing frame: Yes (Y) Pressure vessel approval: CE / ASME (CEASME) Regulation: Elektronikon Graphic (MK5GRAPH) Supply voltage: 400 V (400V) Working pressure: 13 bar (13BAR) Equipped with the following options from the factory: - Refrigerant dryer integrated - Heat recovery integrated - Oil collection tray integrated - MK5 Expansion Module Current operating hours: approx. 122,300 hours Used machine, no warranty

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 400 kg, total length: 1,800 mm, total width: 700 mm, total height: 1,700 mm, power: 15 kW (20.39 HP), operating pressure: 16 bar, pressure (min.): 6 bar, pressure (max.): 16 bar, noise level: 62 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Highly efficient screw compressor with 15 kW / 16 bar specifically designed for the high demands of laser cutting, providing clean compressed air (also available with 22 kW) complete 4-in-1 unit frequency-controlled servo motor 500-liter pressure tank refrigerant dryer fine filter new machine, delivery time approximately 1 week We would be happy to demonstrate the machine to you at our facility. highly efficient, permanent magnet servo motor frequency-controlled / load-dependent Nwedpfx Ajyll Enoiuek for clean and dry compressed air suitable for laser applications with animated color display single-stage screw unit air-cooled durable and low-maintenance optional: also available with an additional adsorption dryer Sales are exclusively to commercial customers. Delivery / consultation / sales only in Germany / Austria. technical data (approx.): length: 1.75 m, height: 1.75 m, width: 0.72 m weight: approx. 420 kg pressure: 16 bar flow rate: approx. 1.7 m³/min at 10 bar (1.2 m³/min at 16 bar) noise level: 62 ± 2 dB(A)

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network Nwsdpfjzu Aibjx Aiuok - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: good (used), Year of construction: 1997, functionality: fully functional, OIL-FREE AIR COMPRESSOR Designed to supply oil-free compressed air for low-pressure industrial applications. TECHNICAL DATA Maximum working pressure: 3.5 bar(g) Typical operating pressure: 3.2 bar Input power: 168 / 187 kW Shaft speed: 2,220 / 3,570 rpm Approximate dimensions (L × W × H): 3,000 × 1,600 × 2,000 mm Approximate weight: 4,000 kg Nwjdpfx Aijzvllnsuok Serial number: AIF042384

Condition: good (used), For sale: a mobile Atlas Copco XAS 60 screw compressor with a Deutz F2L 511 diesel engine. The unit has only 613 operating hours since new. The engine is in very good condition – it starts easily and runs properly. The compressor was imported from Germany. It has not been used for about fifteen years, and the compressor's screw element has seized. We attempted to repair it, and the unit was reassembled, but it currently only generates a pressure of approximately 4 bar. For this reason, it is being sold as damaged, for further repair. It may be an interesting proposition for someone who will undertake the repair of the compressor, or as a source of parts, especially the well-maintained Deutz F2L 511 engine. Engine data: * Manufacturer: Deutz * Type: F2L 511 Nwsdozv Ei Hspfx Aiujk * Power: 25 kW / 34 HP * Speed: 2800 rpm * Operating hours: 613 hours * Engine is functional, starts and runs properly The visual condition is appropriate for the age of the unit – visible signs of use, storage, and localized corrosion.

Condition: good (used), Year of construction: 1993, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Manufacturer: Mahle, screw compressor type MSK G11 -Drive power: 11 kW -Volume flow rate: 1.48 m³/min -Max. pressure: 10 bar -Individual components: see photos Nodpozulbtefx Aiuswk -Dimensions: 730/690/H1315 mm -Weight: 291 kg

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Nedpfxjh A Sfde Aiuewk Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources

Condition: used, Year of construction: 2009, Speed / U/min. intake pressure / bar weight / kg total power requirement / kW Complete compressed air system - screw compressor + refrigeration dryer (Drypoint RA 500) + 2x compressed air boilers (3,000 litres each) Make: COMPAIR Motor power: 75 kW Type: LL80 7.5A Year of manufacture: 2009 Serial no.: CD1000057200 Control system: Delcos 3100 Refrigeration dryer: Drypoint RA 500 Compressed air tank: 2x galvanised tanks, 3,000 l each - total volume 6,000 l Load hours: 79,495 This compressed air system from COMPAIR offers a powerful and efficient solution for industrial applications with high air requirements. LL80 7.5A screw compressor: The compressor with a motor output of 75 kW is robust, low-maintenance and designed for continuous use. Its modern technology ensures a stable and consistent compressed air supply even under high loads. Ideal for production facilities, workshops or other industrial areas. Delcos 3100 control unit: This intelligent control unit makes it easy to operate, monitor and adjust the compressor. It ensures optimum operation, energy efficiency and protection of the system against damage. Njdpfx Aisud Iwzsuewk Drypoint RA 500 refrigeration dryer: An integrated refrigeration dryer is essential for removing moisture from the air. This protects downstream machines and tools from corrosion and extends the service life of the entire system. Compressed air tank - 2x galvanised tanks with a volume of 3,000 l each: The two robust, galvanised tanks offer a large storage capacity of 6,000 litres in total. This keeps the pressure stable and maximises performance.

Condition: used, Year of construction: 2000, Technical details: feed pressure: 10 bar airflow volume: 1,06 m³/min Motor RPM: 3920 1/min total power requirement: 7,5 kW electrics - voltage/frequency: 400/50 V/Hz machine weight approx.: 250 kg dimensions L x W x H: 1,5 x 2 x 2 m Nedpfxezuvwxe Aiujwk Professional, soundproofed compressor with the lowest noise level in its class, designed to eliminate noise problems in working environments. The powerful 5.5 hp pump unit guarantees maximum efficiency and reliability. It is also equipped with an additional intake silencer, a belt tensioning device that regulates belt tension and facilitates replacement, and a forced ventilation fan for better cooling. The control panel with star-delta start control is positioned for easy reading and operation. The opening front door allows for easy maintenance. *

Condition: good (used), Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Atlas Copco, screw block compressor stage from compressor type GA 408 Pack -Screw block: Type GA 408 -Final pressure: max. 8 bar -Shaft: Ø 40 x 55 mm Nwsdpfx Aieztx Ansuok -Dimensions: 760/490/H500 mm -Weight: 160 kg

Year of construction: 1994, operating hours: 32,303 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, second-hand Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of construction: 1994 Machine no.: 32061 Operating hours: 32,303 hours Screw geometry: conical for PVC-hard profiles Screw diameter: 63 - 121 mm Screw length: 1300 mm Nwedpfjyhcghex Aiuok Screw speed: max. approx. 32 1/min. Nominal torque from gearbox: 1000 daNm Dynamic load rating of the back pressure bearing: 103600 daN Motor power: 43.0 kW, Drive motor: Baumüller DC motor Barrel heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool heating zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible melt pressure: 500 bar Output: approx. 150 - 200 kg/h for rigid PVC profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Condition: The machine came directly from production and was cleaned by us, repainted (RAL 7035, light gray) and checked for function. Barrel and screws are in a good condition.

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Nwedpfx Aieyhcc Asujk Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: used, feed pressure / bar liter capacity / l Air consumption / m³/h For sale is a powerful ALUP Solo 18 screw compressor with 18.5 kW motor power, ideal for industrial use. The compressor is offered including a high-quality DRYPOINT RA refrigeration dryer from Kaeser - for reliable and efficient compressed air drying without moisture problems. The ALUP Solo 18 is a compact, oil-injected screw compressor, which is suitable for medium to large operations. It is characterised by its energy efficiency, low noise levels and high reliability Technical specifications Nwjdowz Ry Depfx Aiusk Motor power: 18.5 kW Max. Operating pressure: 13 bar Delivery rate: up to 200 m³/h Low-noise and energy-efficient Including DRYPOINT RA refrigerant dryer for dry, clean compressed air Including compressed air tank for pressure stabilisation and condensate management Perfectly suited for demanding industrial applications Technical data taken from publicly available sources

Condition: used, Year of construction: 2017, feed pressure / bar liter capacity / l Air consumption / m³/h Nwodpfjxy S H Tjx Aiuok

Condition: new, Order picking trolley, shelf trolley, shelf trolley, trolley, transport trolley, shelf with wheels, shelf with boxes including 36 x visible storage boxes Data: H: approx. 216 cm D: approx. 68 cm L: approx. 1.95 linear meters Load: 150 kg per level Stand in blue Crossbeams in orange Storage boxes in blue Nodpfx Aezwnb Ujiuewk Natural chipboard New goods BLT / WR 20/60 100% quality at the best price. Shelf consists of: 02 x stands approx. 200 cm x 60 cm, pre-assembled. 14 x crossbeams approx. 185 cm. 07 x support shelf approx. 184.5 x 59.5 cm. 28 x locking pins. 36 x visible storage boxes size. 5 (500x300x200mm) 02 x swivel castor with brake 02 x swivel castor without brake 04 x base plate for swivel castor Levels: 7 storage levels -- AVAILABLE IN MULTIPLE NUMBERS IMMEDIATELY-- Price: €822.00 net €978.18 gross You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Our recommendation: Let us know what you need... We are happy to help you realize your projects, from planning to ordering to assembly. Are you interested or have any questions? Just contact us by message or call. You can find our telephone number on our company website. ☎️ You can reach us by phone from Monday to Friday, 8:00 a.m. to 3:00 p.m. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2019, operating hours: 3,066 h, load capacity: 1,600 kg, lifting height: 200 mm, load center: 600 mm, fuel type: electric, fork length: 1,150 mm, Equipment: CE marking, UVV, Low-lift pallet trucks Lifting height: 200 mm - initial lift MABO Forklift Service GmbH offers: Nwodozwnqpepfx Aiuek * Purchase and rental of new and used forklifts or warehouse equipment * Purchase of warehouse equipment or forklifts * Comprehensive service – on-site or in the workshop * Training courses for forklift operators

Year of construction: 1980, condition: reconditioned (used), machine/vehicle number: 2489, stock-No.:2489 1 used, functionally tested Single-Screw-Extruder, ready for trial-run: Nodpfjd Sg Hcsx Aiuewk Manufacturer: KUHNE Germany Type: ES 60-24 Screw- Ø 60 mm – 24 LD Main-feed zone can be chilled( cooling unit not included ) Screw speed up to 100 r.p.m. Extruder Motor: 25,5 kW – 63 A – DC 4x Heating zones with air-cooling 3x additional heating zones for down-stream equipment as: die-head, tools, screen-pack-changer, etc. control board Relating down-stream-equipment as screen-pack-changer, pelletizing etc. against additional price, details upon request. More extruders ex stock available, visit us or ask for our most recent Machine-Stock-List. You´re welcome.