Used Screw Jacks for sale (6,410)

Condition: good (used), Year of construction: 2020, operating hours: 1,730 h, functionality: fully functional, overall weight: 580 kg, total length: 1,335 mm, total width: 750 mm, total height: 1,880 mm, pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, noise level: 66 dB, protection type (IP code): IP55, Equipment: documentation/manual, refrigerant dryer, type plate available, Kaeser Aircenter SK22 Screw Compressor (2020) Manufacturer: Kaeser Type: Aircenter SK22 Year of Manufacture: 2020 Condition: Very good, used Run-on hours: 6,000 h Load hours: 1,730 h Maintenance in 2,589 h Technical Specifications Pressure 11 bar Effective free air delivery 1.67 m³/min Rated motor power 11 kW Motor protection class IP 55 Power supply 400 V / 3 Ph / 50 Hz Dimensions (W x D x H) 750 x 1,335 x 1,880 mm Dusdpfx Aey Tkhrohneu Weight 580 kg Air receiver 350 l Compressed air connection G 1 Sound pressure level 66 dB(A) Refrigeration dryer Power consumption 0.49 kW Pressure dew point 3 °C Pressure drop 0.06 bar Refrigerant R 513a Energy-saving control: Yes Electronic condensate drain: Eco-Drain Electrical equipment: EN 60204-1: Yes Scope of delivery: – Complete original documentation – RFID cards (2x) – 5m power cable with 32A plug

Condition: like new (used), Year of construction: 2021, operating hours: 620 h, functionality: fully functional, Kaeser Aircenter SM13-11 screw compressor (2021) Dodpfxjy Tkg Ij Ahneuu Manufacturer: Kaeser Type: Aircenter SM13-11 Year of manufacture: 2021 Condition: Very good, used Switch-on hours: 1356h Load hours: 606h Maintenance in 2825h Technical data Pressure 11 bar Effective delivery quantity 1.08 m³/min Nominal power drive motor 7.5 kW Protection class drive motor IP 54 Electrical supply 400 V / 3 Ph / 50 Hz Dimensions (WxDxH) 630x1200x1716 mm Weight 400 kg Compressed air tank 270 l Compressed air connection G 3/4 Sound pressure level 64 dB(A) Refrigeration dryer Power consumption 0.26 kW Pressure dew point 3 °C Pressure loss 0.2 bar Refrigerant R 134a Energy saving control Yes Electronic condensate drain Eco-Drain Electrical equipment EN 60204-1 Yes Scope of delivery: – Complete original documentation – RFID cards (2x) – 5m supply cable with 32A plug

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw Dodsy Th Ngspfx Ahnouu

Condition: excellent (used), Aerzen VM 9 R Delta Screw Compressor with sound insulation hood Suction pressure: 1 bar Suction volume: 600m³/h Motor power: 55 kW Very good condition, directly from production!!! Duodpfx Aogg Sgaohnou

Condition: defective spare-parts repository (used), Electric pallet truck with tiller, Jungheinrich, Ameise EJE 222 – used, defective battery - : Price on request! Manufacturer: JUNGHEINRICH Model: Ameise EJE 222 (defective battery) Serial number: 90106944 Year of manufacture: 2004 Rated capacity: 2,200 kg Unladen weight without battery: 380 kg 24V, 1.5kW Battery weight: 171 / 263 kg Operating hours: 7,255 h Lift height: 130 mm Dujdpfx Ahsyzfncenju Fork length: 1,150 mm Vehicle weight: 643 kg Condition: good Available: immediately Location: 97828 Marktheidenfeld

Condition: used, Year of construction: 1998, operating hours: 30,559 h, functionality: fully functional, overall weight: 825 kg, power: 30 kW (40.79 HP), fuel type: electric, volume flow: 312 m³/h, operating pressure: 8 bar, pressure (max.): 8.5 bar, noise level: 70 dB, Equipment: documentation/manual, refrigerant dryer, type plate available, ❇️ Atlas Copco GA30 FF Screw Compressor – 30 kW, 8.5 bar, top maintained For sale is a used, but very well-maintained industrial screw compressor from the premium manufacturer Atlas Copco, model GA30 FF with integrated refrigeration dryer. The unit was manufactured in 03/1998, has been regularly maintained, and was in reliable operation until February 2022. ⸻ ❇️ Technical Data • Model: GA30 FF (with integrated refrigeration dryer) • Year of manufacture: March 1998 • Motor power: 30 kW (approx. 40 hp) • Max. operating pressure: 8.5 bar (factory version) • Volume flow (FAD): approx. 5.2 m³/min (≈ 312 m³/h) • Connection: 400 V / 50 Hz / 3~ (5-pole) • Fuse rating: 3 × 63 A • Operating hours (at last maintenance): 30,559 h • Weight: approx. 800–850 kg ⸻ ❇️ Maintenance & Condition The compressor was last professionally maintained by DF Druckluft-Fachhandel GmbH on February 14, 2022. The following components were replaced: • Oil plug • Solenoid valve • Suction regulator kit Since then, the unit has not been operated. It was prepared for shutdown immediately after the maintenance and is therefore in operational condition. The compressor was stored in a dry and protected indoor area. ⸻ ❇️ Special Features & Equipment • FF model: integrated refrigeration dryer for dry compressed air – ideal for sensitive applications such as painting or control air technology • Elektronikon® control – clear control panel with operating data storage • Sound insulation canopy (industrial version) • Steel housing – transportable with pallet truck or forklift ⸻ ✅ Ideal for Workshops · Production facilities · Metal and wood processing · Tire service · Sandblasting technology · and more ⸻ ❇️ Location & Loading • Location: 71083 Herrenberg (near Stuttgart) • Assistance with loading on site possible (forklift available) • Inspection possible by arrangement ⸻ ❇️ Price & Contact Price: €2,790 plus 19% VAT. ———— ‼️ Please also take a look at my other items. It's worth it! Inspection and collection in 71083 Herrenberg. ⚠️ Shipping (by forwarding agent) or delivery is possible for an additional fee. Duedpfoykk Rajx Ahnju

Condition: excellent (used), Year of construction: 2012, ATLAS COPCO ZT22VSD 22Kw OIL-FREE COMPRESSOR ATLAS COPCO ZT22VSD oil-free rotary screw compressor with a frequency converter. Technical data: Djdpfxezb Ia He Ahnouu Capacity: 3.38 m3/min; Engine power: 22 kW; Pressure: 10 bar; Year: 2012 Operating hours: 13,486 h We provide service. 31,500 PLN net 38,745 PLN gross We provide service.

Condition: excellent (used), pressure (max.): 8 bar, Screw compressor Manufacturer: Boge Type: S 8 Free air delivery: 0.83 m³/min Pressure: 8 bar Motor power: 5.5 kW Tank capacity: 250 liters Refrigeration dryer Type: DP 9/352 Transport dimensions: Length 1750 mm Width 750 mm Height 1550 mm with pallet Djdpfx Ahey Slf Nsnjuu

Condition: excellent (used), Year of construction: 2010, operating hours: 75,000 h, functionality: fully functional, 55 kW compressor with built-in dryer and frequency inverter. Very good condition. After service. 3 months warranty. Dsdpfev Rmmmsx Ahnsuu

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: API621725, For sale: Atlas COPCO ZR 132 compressor with filters, 125 KW Dsdpfjwrm T Ijx Ahnouu

Condition: like new (used), Year of construction: 2024, operating hours: 2,454 h, functionality: fully functional, fuel type: electric, For sale: Toskom VSD 15 Screw Compressor Power: 15 kW Pressure: 10 bar Capacity: 2,000 l/min Screw air end: ROTORCOMP (Germany) Features: Variable Speed Drive (VSD) – frequency converter adjusts output to actual air consumption, significantly saving energy. Condition: Purchased new in the Czech Republic, in operation since 03/2024. Maintenance: Regularly serviced, includes complete technical documentation. Ownership: 1st owner. Operating hours: 2,454 h (total) / 1,107 h (under load). Included: Output filter assembly included in the price. Trial: Can be demonstrated in operation. Price: [Insert Price] excl. VAT. Dsdpfxjylm Ahs Ahnsuu Optional extras: 500L Air Receiver (2017): +€500 excl. VAT (includes fittings and valid inspection certificate). Atmos AHD101 Air Dryer (2015): +€500 excl. VAT.

Condition: like new (used), Year of construction: 2017, operating hours: 5,425 h, functionality: fully functional, Screw compressor, Atlas Copco GA30FF Dryer integrated. 30 kW 9.75 bar Dusdpfxsy Tvd Sj Ahnou 4.79 m3/min Year of manufacture: 2017 Operating hours: 5,425

Condition: new, Year of construction: 2026, SP3000SUPER Pallet Truck with Scale The SP3000SUPER pallet truck with scale is a robust and practical weighing pallet truck designed for transporting, lifting, and weighing loads directly during operation. It is ideal wherever fast pallet handling, load weight control, and efficient material flow are essential in warehouses, manufacturing facilities, logistics centers, wholesale operations, and loading areas. The SP3000SUPER features standard forks designed for Euro pallets, making it a convenient choice for everyday handling of EUR pallets. The truck allows operators to quickly pick up pallets, transport goods, and weigh loads simultaneously without the need for a separate floor scale. This solution is designed for companies looking to speed up goods receiving, order picking, shipment verification, and internal transportation processes. The electronic weighing pallet truck helps reduce additional handling operations, minimize errors, and improve control over the weight of transported goods. Key Advantages of the SP3000SUPER Pallet Truck Integrated electronic scale – instant load weight readings without the need for a separate stationary scale. Standard Euro pallet forks – ideal for handling EUR pallets in warehouses, wholesale facilities, production plants, and logistics centers. 3,000 kg load capacity – suitable for heavy loads, palletized goods, materials, and production components. 1,150 mm fork length – universal dimensions for handling standard Euro pallets. Duedpfx Aeychbtehnsu Lifting range of 80–190 mm – convenient lifting, transporting, and positioning of pallets. Polyurethane wheels – smooth and quiet operation with excellent wear resistance during daily use. Heavy-duty construction – stable frame designed for intensive warehouse applications. Easy maneuverability – performs efficiently in warehouse aisles, near racking systems, loading docks, and order-picking stations. Transporting, Lifting, and Weighing in One Device The SP3000SUPER weighing pallet truck combines the functionality of a conventional pallet truck with an integrated weighing system. Operators can approach a pallet, lift it, transport it, and instantly verify the weight of the load. This is particularly beneficial in environments where accurate weight information is required for documentation, shipping, receiving inspections, or inventory management. Thanks to the built-in scale, the truck significantly reduces handling time. There is no need to move pallets to a separate weighing station, which streamlines receiving operations, goods inspection, order picking, and shipment preparation. This is especially valuable in high-turnover warehouses, logistics hubs, and e-commerce fulfillment centers. The electronic weighing pallet truck provides better control over material flow, reduces the risk of errors, and enables faster response to weight discrepancies. It is a practical solution for daily operations where efficiency, accuracy, and ergonomic pallet handling are priorities. Standard Euro Pallet Forks The SP3000SUPER is equipped with forks specifically designed for handling Euro pallets. Technical Specifications Parameter Value Fork Outside Width 560 mm Single Fork Width 160 mm Fork Length 1,150 mm Lifting Range 80–190 mm Overall Dimensions 1,600 × 560 × 1,230 mm Wheels Ø180 × 50 mm / Ø80 × 70 mm, polyurethane Net Weight 102 kg

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Dodpfxouzn Nne Ahnjuu Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: used, 1 mobile screw compressor, KAESER M30PE Dedpfx Ahjy Tiggsnsuu Operating hours: 48h, serial number 1343-8968028 Color: as shown in the pictures, according to the images and upon inspection Condition: used

Condition: ready for operation (used), L & Z Lathe WEILER Praktikant 800 R -Turning diameter over bed: 300mm -Turning diameter over cross slide: 150mm Dedjzbiyhepfx Ahneuu -Turning length: 800mm -Spindle bore: approx. 42mm -Speed range: 40 - 2000 rpm -Automatic longitudinal/facing feeds -Threading / Metric / Inch, etc. -Tailstock: MK 3 -Three-jaw chuck -Chip guard & work light -Chip tray -Change gears -Tool cabinet & operating tools -Documentation Dimensions: L x W x H 1.8 x 0.8 x 1.6 meters / Weight: 800 kg Errors and omissions excepted.

Condition: used, Year of construction: 1994, Overview This Solo Screw Capper was manufactured in 1994 by French company Zalkin. The machine was used to apply plastic caps on 75cl cider glass bottles with a capacity of up to 9,000 bottles per hour. It is immediately available as the production at the previous facility was stopped in 2022. The cap hopper pneumatic system is included. Technical data  Capacity: up to 9,000 bph Formats: 75cl cider glass bottles Dimensions: L.220 cm x W.150 cm x H.320 cm Scope of Delivery  Zalkin CA6 Solo Screw Capper Cap hopper with pneumatic system Dsdpfswhkq Nex Ahnouu

Condition: used, Year of construction: 2013, functionality: fully functional, Atlas Copco GA 5 VSD screw compressor, manufactured in 2013, from ongoing operation. The speed-controlled VSD technology adjusts the delivery rate according to demand, thus noticeably saving energy during partial load operation. An operating log with documented maintenance and operating hours was kept throughout the entire period of use (see photo). Duedpfx Ahjza Ah Aenou Condition: • Used, well-maintained condition • Regularly serviced • Operating log available • Technically in use until recently Location: Selters. Shipping or collection from the location is possible. Technical data: Manufacturer: Atlas Copco Model: GA 5 VSD Year of manufacture: 2013 Drive power: 5.5 kW Voltage: 400 V / 50 Hz / 3-phase Max. operating pressure: 13 bar Control: Elektronikon Speed control: VSD (frequency-controlled) Weight: approx. 275 kg Refrigerant: R134a CE marking: present Location: Selters

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Farmet FL200 screw press for rapeseed/sunflower/soybean, with final geometry, in a really good condition. Motor 22kw, capacity 400kg/h (with prepress 500kg/h), lamels and geometry checked, and in a good shape. Paired with extruder Farmet FE500 (from our offer) it can process soybean at 400kg/h Duedpfx Aexa Hy Ushnsu

Condition: excellent (used), Year of construction: 2004, operating hours: 114,000 h, overall weight: 4,400 kg, power: 250 kW (339.91 HP), volume flow: 2.802 m³/h, operating pressure: 10 bar, Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Compressor: Dodpfx Aherp D Uxsnouu Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Last service: September 2023 Adsorption dryer, water-cooled Manufacturer: Atlas Copco Type: MD 600 W Year of construction: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters machine dimensions: length: 3000mm width: 1600mm height: 2000mm weight: 4400 kg

Condition: excellent (used), Year of construction: 1996, Compair Cyclon 6000N screw compressor 75kw power: 75 Kw air transport : 12.9 /min :774 m3/h pressure: 8 bars voltage: 400v 50Hz 3 phase Dujdpfxsh Unhnj Ahnsu Construction of year: 1996 hours:51000h weight: 1800 kg Size: length: 2100mm width: 1700mm Height: 1510mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), Year of construction: 2008, operating hours: 87,000 h, functionality: fully functional, overall weight: 775 kg, total length: 1,770 mm, total width: 900 mm, total height: 1,530 mm, fuel type: electric, volume flow: 190 m³/h, operating pressure: 8 bar, pressure (max.): 10 bar, noise level: 68 dB, type of cooling: air, Equipment: refrigerant dryer, Manufacturer: Kaeser ASD 32T screw compressor + refrigerant dryer serviced throughout!!! complete documentation Year of construction: 2008 Duodpfxoi E H Ikj Ahneu Nominal pressure: 8 bar air flow: 3.16 m3/min air flow: 189.6 /hour operating hours: Refrigeration dryer: ABT60 Compressed air connection: G 1¼ Voltage: 400V/3PH, 36A Power: 18.5 kW engine speed: 2945/min Ambient temperature: 3 / 45°C machine weight: 745 machine dimensions: 1,770 x 900 x 1,530 mm

Condition: good (used), Year of construction: 1998, operating hours: 10,300 h, overall weight: 475 kg, fuel type: electric, volume flow: 186 m³/h, operating pressure: 10 bar, pressure (max.): 10 bar, 22kw 3.1m3/min ATLAS COPCO GA22 screw compressor Continuously serviced and maintained 22kw screw compressor for sale. Manufacturer: Atlas Copco GA22 SP operating hours: 10350 Year of manufacture: 1999 Capacity: 3.1 M3/minute, pressure: 10 bar Power 22kw main engine speed: 3,000/min Net weight: 405 Kg Dimensions: mm (LxWxH) Noise level: 66 dB service booklet, circuit diagram. Duodstxpd Ispfx Ahnou

Condition: used, Year of construction: 2006, functionality: fully functional, cooling capacity: 57 kW (77.50 HP), Trane CHHP0L1TKE0N057A refrigeration compressor several units for sale/ ct1968 Duedpfx Ahjubakujnsu Manufacturer: Trane Type: CHHP0L1TKE0N057A Refrigerant: Freon Refrigerant type: R134A Power: 57kW, 400V, 50Hz, 3 phases Dimensions: 1000x630x570mm Several pieces, for sale from stock

Condition: used, Year of construction: 2006, operating hours: 89,000 h, functionality: fully functional, power: 75 kW (101.97 HP), fuel type: diesel, type of cooling: air, Kaeser CSD 122 SFC screw compressor built-in inverter 2.2-10.5m3/min, 75kW, 8.5bar Manufacturer: Kaeser Type: CSD 122 SFC Year of manufacture: 2006 Dedpfx Ajt A Uyuehnouu Operating pressure: max 8.5bar Power: 75kW Capacity: 2.2 - 10.5 m3/min Operating hours: 96244 h (Last service: 88854 h) Inclusion dimensions: 1100 x 2200 x 1900 mm Net weight: 1600 kg