Used beverage production for sale (1,003)

Condition: used, Year of construction: 1983, Additional title: lying tank in container Capacity: 32 hl Operating pressure: 2 bar Operating temperature: 20 °C Fodpfoxbqrqox Akvepg Length: 4,65 m Width: 2,3 m Height: 1,95 m Weight: 2500 kg Features: Beer pump, thermometer, gas measurement, flow meter (Diessel), 2 cable drums, hose reel, safety valve, cleaning and filling connection, spray head, manometer, empty detection electrode Control cabinet, compressed air compressor (AltasCopco), pallet for 4 CO2 bottles, valves, pressure reducer

Condition: used, Year of construction: 1991, Vertical 6 bar stainless steel pressure tank with dished ends and various fittings and equipment. Additional title: vertical stainless steel tank Volume: 10560 l Fsdpoxlpf Defx Akvepg Max. working overpressure: 6 bar test pressure: 7,8 bar Max. working temperature: 10 °C Length: 1900 mm Width: 1900 mm Height: 4770 mm Material: stainless steel 1.4301 (AISI 304) Position: standing on 3 pipefeet Base construction: bottomed shells Features: Cleaning air/valve combination, cleaning line, CIP spray head, manhole, hose level indicator, sampling tap, pressure gauge, bunging device, safety valve, vacuum flap

Condition: used, Year of construction: 2009, upright, insulated stainless steel CIP tank with 6 containers arranged one above the other. The total capacity is 500 hl. Additional title: vertical stainless steel tank Contents 2 zones each: 10000 l Content 1 zone: 14000 l Width: 3000 mm Height: 12087 mm Material: stainless steel Fpsdpfxexwxy Ue Akvog Position: free standing Base construction: 6 cylindrical tanks arranged one above the other with conical bottoms, Features: ladders and platforms with guard rails, manhole in the covers, shell insulation with welded stainless steel cladding, collecting overflow,

Condition: used, Year of construction: 2019, Insulated, upright stainless steel tank with heating jacket (+temperature control) and pressure booster pump (3 m³/h at 3 bar). The tank is also equipped with a drain pipe, level indicator and pressure gauge. Additional title: vertical, insulated, heatable stainless steel tank Gross volume: 2000 l Height: 2100 mm Fedoxwy Aqepfx Akvspg Material: Stainless steel 1.4404 (AISI 316 L) with insulating cladding made of 1.4301 (AISI 304) Base construction: standing on 4 feet Features: Insulation (insulation thickness 50 mm); heating jacket; temperature control; pressure booster pump (Grundfos); outlet pipe; hose level indicator; pressure gauge

Condition: used, Year of construction: 2010, Capacity: 18000 bottles/h closing heads: 24 pieces Power: approx. 5 kW Water: approx. 200 l/h Compressed air: approx. 2 cbm/h Length: 3,3 m Width: 2,2 m Height: 2,4 m Weight: 3000 kg Formats: 0,33 l; 0,5 l; max. bottle diameter 90 mm Running direction: right - left Material: Stainless steel, wear-resistant plastic Fodpovcqgbjfx Akvepg Base construction: miniaturized, hygienic machine table in outward beveled design Features: mechanical / pneumatic control device (testing of bow clamping), central lubrication, height adjustment for processing of different bottle heights, rinsing and swelling device, high-pressure injection device, HDE injection nozzle at the discharge table, Discharge table, pusher station

Condition: used, Year of construction: 1999, Stainless steel storage tank, horizontal, equipped with cooling jackets. Additional title: coolable tank Volume: 229 hl Cooling jacket volume 4 x: 12 l Operating pressure: 3 bar Operating temperature: 20 °C Length: approx. 4,7 m Width: approx. 2,7 m Fpsdpfxevcqmzo Akvog Height: approx. 2,9 m Material: Stainless steel 1.4310 Position: Horizontal Base construction: 6 x height-adjustable feet Features: Cooling jackets; manway; sapling valve; level sensor full; cleaning connection

Condition: used, Year of construction: 1993, Additional title: vertical, coolable stainless steel tank Gross volume: 8071 l Fpsdjvcqnrspfx Akvjg Length: 2100 mm Width: 2100 mm Height: 3750 mm Material: stainless steel 1.4301 Position: standing on feet Features: Flat conical bottom, frame and cone cooling zone, manhole, sampling tap, yeast slide, central spout.

Condition: used, Capacity: 50000 b/h Formats: 0,33 l LongNeck-, 0,5 l NRW-bottles, neck-/breast-/body-/back-labels, Euro pallets Operation / Control: Siemens S5 Features: decrowner, decrater, bottle washing machine, empty bottle inspector, bottle filler and closurer, filled height inspection, labelling machine, dating, label inspection, crown cork inspection, crater, filled crate inspection, bottle and crate conveyors Fodpfx Aevcqr Djkvjpg

Condition: used, Year of construction: 1992, Storage cellar consisting of 8 vertical tanks with temperature control. Additional title: coolable stainless steel tanks Features: 8 storage tanks (6x approx. 165 hl, 2 x approx. 175 hl), temperature control, paneel, blending apparatus Fpodpfxovcqthe Akvjg

Condition: used, Glass bottle filling line for beer and non-alcoholic beverages for filling 9000 bph. Includes: - De-capper: JOHA type Smaragt, built in 1990, with one unscrewing head - Bottle unpacker: JOHA type E100, built in 1978, with one packing head - Crate washer: JOHA type KA2N, built in 1983 - Bottle washer Pirzer, built in 1983, with 19 bottle racks per row - Empty bottle inspector: Inex type Optiscan 4s - Bottle filler and capper: Krones type 28/7, built in 1975, with 28 filling valves and 7 capping stations - Capper: Adelski, with 4 capping stations - Labelling machine: Pirzer, built in 1979, for belly and neck labels, with 8 labelling stations - Bottle packer: JOHA type A400 Q, built in 1977, with one packing head Additional title: Years of manufacture: 1975 - 1990 Fpjdpfx Ajvcq Avekvsg Capacity: 9000 bottles/h Formats: 0,5 l Euro bottle; crown cap; screw cap; 20x0,5 l beverage crate Features: De-capper; de-crater; crate washer; bottle washing machine; empty bottle inspector; bottle filler and capper (28 filling valves and 7 capping heads); screw-capper; labelling machine; bottle crater

Condition: used, Year of construction: 2016, Heuft empty bottle inspector with: - Infeed inspection with belt stop - Bottom inspection - Mouth inspection - IR residual liquid detection - HF residual liquid detection - Simple lateral migration detection in the outlet - Single-segment rejection with rejection control Additional title: Bottle inspection machine Capacity: 8000 bottles/h Fpodpfew S T N Ijx Akveg Voltage: 400 Volt Frequency: 50/60 Hertz Compressed air: min. 5 bar Length: 2030 cm Width: 950 cm Height: 1830+conveyor height cm Weight: 1600 kg Running direction: from right to left Operation / Control: Heuft Spectrum reflexx, Heuft speedy environment control for controlling the motors Position: free standing Periphery: Synchronised container transport segments after the inspector

Condition: used, Year of construction: 2004, Kieselguhr settling tank with 4.45 m³ capacity Additional title: KG settling tank Fodpfxew Uc Ths Akvopg Content: 4450 l Max. working pressure: 80 °C Length: 1710 mm Width: 1710 mm Height: 3550 mm Weight: 450 kg Material: stainless steel 1.4301 Position: vertical cylindro-conical tank Base construction: on pipe feet Features: manhole on top, 4 shell-de-watering-connections, 4 aeration-connections at the cone

Condition: used, Trap filter housing for post-filtration of beer or other liquids. Available in any size, capacity and selectivity. Manufacturer: Sartorius/Seitz/Pall/Filtrox/Eaton Please let us know your application (medium, flow rate, selectivity) and we will find a suitable solution for you. Additional title: Post-filtration Material: stainless steel Position: free standing Base construction: Cylindrical housing on tubular feet with spherical caps Fjdpfx Aksw Uu U Rovopg Features: Pressure gauge, housing with clamping screws or clamping ring

Condition: used, Year of construction: 1974, Additional title: horizontal pressure tank Capacity: 150 hl Operating pressure: 4 atm Operating temperature: 20 °C Material: Stainless steel Position: horizontal Features: Internal piping for heating; level indicator; CIP connection; thermometer; sampling valve Fpjdpfx Aoyzhv Nskvsg

Condition: used, Year of construction: 2004, Additional title: water deaeration Capacity: 50 hl/h O2-contents after deaeration: 0,5 ppm Temperature: 16 °C Fpsdpfxoxw R Rxs Akvog Pressure: 4 bar Power: 1,0 kW Voltage: 380 V Frequency: 50 Hz Operation / Control: Fully automatic / Steuerung S7 Material: Frame: 1.4301, pipes: 1.4404 Features: Water line (pneumatic flap valves, flow meter, check valve, sampling valve), membrane module (water inlet from below), CO2-line (flap valve, pressure reduction valve, flow meter, manual regulation valve) Vaccum line (Flap valve, vacuum pump (ELMO), manual regulation valve), plate heat exchanger (Thermowave), pressure boosting pump (Hilge, 4,5 bar with 250 hl/h, 7,5 kW motor)

Condition: used, Year of construction: 2010, PARAMIX unit for carbonated drinks. The included process steps are: Deaeration of water, dosing and mixing of water and syrup, carbonating of water-syrup blend. Retrofit 2009 by FAMIX: - Carbonating device - CO2 pressure-temperature ratio controller Type BMS7 The controller including control cabinet is to be completely renewed when the machine is purchased. Additional title: mixing unit 1983 - 2010 Capacity approx.: 150 hl/h Mixing and carbonating Length: 2,9 m Width: 2,5 m Height: 2,5 m Weight: 3000 kg Fpodpfx Aksxbn Hrovsg Operation / Control: mixing unit semi automatic, carbonating unit automatic Siemens S7 Material: Stainless steel Position: Frame mounted Features: 2 pressure vessels (Product und Vacum), each 8,3 hl/ 8 bar, CO2-Pressure-Temperature regulator (FAMIX BMS7), Carbonising unit (FAMIX) Capacity 13000 l/h, PT 100, Pressure sensor, Pressure relief valve, CIP connection, control cabinet, HMI (Siemens), 2 mixing vessels with flap and agitator (Ahlborn, approx. 15 hl per vessel)

Condition: used, Sterilizable universal filter for sterilization filtration. Stationary sheet filter with square filter elements in a vertical row arrangement, hydraulic filter sheet pressure. Hydraulic control from built-in electrical control panel. Additional title: Sterilisation filter, years of manufacture 1979-2010 Capacity approx.: 750 hl/h Sheet filter - filtration area approx. 356 - 493m2 Operating pressure: 8 bar Fjdpfx Akexbn N Hsvepg Power: 6 kW Voltage: 220/380 V Frequency: 50 Hz Length: 10100 mm Width: 1320 mm Height: 1750 mm Formats: Square filter elements Operation / Control: Vertical row arrangement Material: Stainless steel Position: Horizontal Base construction: Frame Features: Filter sheets; hydraulik filter plate compression; hose pump Layer patterns: Vertical row arrangement

Condition: used, Year of construction: 2001, Insulated, cylindroconical stainless steel tanks with three shell cooling zones and one cone cooling zone. Previously used as beer storage tanks. Additional title: vertical, coolable, insulated stainless steel tanks Gross volume: 30200 l Pressure capacity: 0,99 bar Fpedpfx Akexbpd Ssvog Max. operating temperature: 40 °C Cooling area: 14,45 m2 Length: 2,83 m Width: 2,83 m Height: 7,86 m Weight: 3150 kg Material: stainless steel Position: standing frame Features: insulation, tank fittings

Condition: used, Kieselguhr plate filter, 60 x 60 cm with 35 frames and 34 plates, manual pressing. Complete filtration plant consisting of: - kieselguhr plate filter - kieselguhr dosing vessel with agitator - kieselguhr dosing pump - feed pump - flow meter Fodjxbpiujpfx Akvspg Additional title: Frame filter with agitator tank, dosing pump, feed pump and flow meter Number of frames: 35 Number of plates: 34 Length: 4,7 m Width: 0,8 m Height: 1 m Weight: 2500 kg

Condition: used, Year of construction: 1977, VA kieselguhr filter 100 x 100 H&K brand with hydraulic pressure Fedpfx Asxbpk Sskvopg Material: Stainless Steel Features: Kieselguhr discharge pump, manufacturer Allweiler, type SNP 2002, H4P1; Q L/min: 100; Nl(min) 280; flange connections inlet DN 100, outlet DN 80; length 1.9 m Kieselguhr discharge container with screw (diameter 22 cm) and drive motor; motor 1.1 kW, 1,420 rpm; outlets: DN 100 (kieselguhr), DN 65 (liquid); overall dimensions: 2.85x1.195x0.615 m (LxWxH)

Condition: used, Year of construction: 2000, Flotation tank. - Designed for cooling with ammonia (can also be cooled with glycol), 1 x frame cooling. - Stainless steel - insulated - Stand frame, short -Cleaning air fitting with vacuum valve and safety valve Capacity: 431 hl Operating pressure: 4 bar Material: Stainless steel 1.4301 Position: vertical Fpsdpfx Asxbqg Iskvog Base construction: short supporting skirt Features: Cooling: 1 x side wall cooling jacket; swivel opening with outlet; sampling valve; insulation; dearation and cleaning combination with 2 safety valves; temperature measurement; volume measuerment

Condition: used, Year of construction: 1982, Fermentation tank on feet, uninsulated, with flat conical bottom, side wall and cone cooling zone, central outlet and manhole. Additional title: coolable tank Fjdexbqkmjpfx Akvopg Volume: 21797 l Operating pressure: 0 bar Width: 2,95 m Height: 4,1 m Weight: 2000 kg Material: stainless steel, uninsulated Position: vertical Features: flat conical bottom, side wall and cone cooling zone, central outlet, manhole, DN50

Condition: used, Year of construction: 1986, Additional title: 3 coolable tanks Capacity: 205 hl Fjdpfx Aksxbql Djvspg Operating pressure: 0,3 bar Width: approx. 2,80 m Height: approx. 4,20 m Position: Vertical Base construction: on feet Features: manhole; cooling jackets; spunging apparatus; sampling valve

Condition: used, Year of construction: 1997, vertical stainless steel tank with dished bottoms, shell cooling zone, manhole, sampling tap, central outlet. Additional title: pressure tank Volume: 152 hl Operating pressure: 5 bar Operating temperature: 20 °C Width: approx. 2600 mm Height: approx. 4000 mm Material: stainless steel Position: vertical Base construction: cylindrical tank with dished bottoms, placed an 4 square tube feet Features: cooling coil (jacket, 5.1 m², 1 bar, 84 l, glycol), manhole, spout DN65 with hand flap valve, vacuum valve DN32, safety valve DN25, bung glass, sample pipe DN10, CIP pipe DN40 with spray head DN25, level indicator by hose, yeast plug, pressure gauges, crane eyelets, ladder bar Fodpfoxbqlqjx Akvopg

Condition: used, Year of construction: 2001, PET single-use filling line for water, soft drinks and fruit spritzers. Bottle formats: 0.5 L, 1.0 L, 1.5 L Nominal output: 24,000 bottles/hour (with 1.0 L) The new bottles are destacked on pallets at the new bottle unstacker and transported pneumatically to the rinser. The system consists of: - Markant 1ASH-PL new bottle unstacker Manufacturer: KHS Year of manufacture: 2001 - Pneumatic bottle transport Manufacturer: KHS Year of manufacture: 2001 - Premix system Intermix 240 EIÜD Manufacturer: Ortmann & Herbst Year of manufacture: 1978 with downstream Velcorin dosing - PET rinser: Innoclean FR-ZR 70/113, 1 B/RL Manufacturer: KHS Year of manufacture: 2001 With chlorine dioxide and sterile water rinsing - PET filler Innofill DRV-VF-PET Manufacturer: KHS Year of manufacture: 2001 With Alcoa screw capper and liquid nitrogen dosing - Fill level control Manufacturer: miho Year of manufacture: 1992 - Container transport Manufacturer: KHS Year of manufacture: 2001 - Labelling machine for wrap-around labels Manufacturer: KHS Year of manufacture: 2003 With hot melt glue melter and best-before date printer Fodpfx Akoxhd Apjvopg Features: New glass removal system; pneumatic bottle transport; premix; rinser/filler/capper; fill level control; container transport; labelling machine