Used beverage production for sale (1,131)

Condition: used, Year of construction: 2007, Overview This KHS Innoclean single-end bottle washer for returnable glass bottles was built in 2007. It cleans and de-labels empty bottles before filling: bottles are pushed into carrier-basket cells, run on heavy roller chains through a pre-soak, two pre-warming baths, the main caustic soak with under- and over-caustic label flushing, and three water spray zones, then handed back onto the bottle conveyor at discharge. Nineteen bottles run across the machine width in 4,275 cells; output range and design output are given below under Technical data. At design output, total dwell time is 18.7 minutes, including 10.8 minutes of caustic contact. KHS modernised the drive and operator station in 2022: Triple-i-Drive and a capacitive multi-touch panel with RFID login, detailed under Equipment. A KHS manual supplement dated November 2022 covers the upgrade. Technical data - Manufacturer: KHS Gedszzz Ivepfx An Ejui - Model: Innoclean - Machine type: single-end bottle washer (soaker) - Year of manufacture: 2007 - Drive and control modernisation by KHS: 2022 - Output range: 2,800 - 14,500 bottles/h - Design output: 13,200 bottles/h, 0.75 l glass bottle, 0.68 kg - Bottles across machine width: 19 - Carrier baskets: 225, of which 217 loaded - Cell pitch: 105 mm; carrier chain pitch 169 mm - Bottle diameter: 54.0 - 89.5 mm (plastic cells) - Bottle height: 180 - 340 mm - Bath volumes: main caustic soak 23.0 m³, pre-soaks 0.9 and 1.1 m³, after-caustic 0.3 m³, spray zones 0.4 m³ each - Power supply: 400 V, 50 Hz, TN-S, 113 A nominal, 125 A slow fuse; control voltage 24 V DC - Water consumption: 3.56 m³/h, 270 ml per bottle - Compressed air: 1.0 Nm³/h at 3 bar - Overall dimensions: 11,040 x 4,470 x H 3,438 mm (incl. infeed table) - Conveyor heights: infeed 720 mm, discharge 1,690 mm - Weight approx.: 33.5 t machine, 62.6 t operating - Largest transport segment: 4,410 x 4,100 x 3,370 mm, approx. 7.3 t - Enclosure type 12; CE marked Equipment - Triple-i-Drive: worm gearboxes with individual geared motors, each on its own servo inverter with synchronisation and individual overload protection - Servo-driven infeed and discharge segments with brake motors - Capacitive multi-touch operator panel, graphical interface with component views, RFID card reader - Gearbox monitoring with torque protection - Two pre-warming and main caustic immersion baths, with under- and over-caustic label flushing and bottle base spray-off - Automatic label discharge over a full-width sieve belt with brush take-off - Automatic level control and caustic dosing; sieve tub filtration and after-caustic circuit for long caustic service life - Three water spray zones, internal and external, with rotating fresh-water spray - Vapour extraction and plate heat exchanger - Siemens SIMOTION D and SINAMICS drive cabinet - Original KHS documentation: operating manual, 2022 supplement, spare parts list Condition Used, technically complete. Still installed and under power at its production site; photographs and video show it running. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, Year of construction: 2023, Overview This Krones Pressant Universal 1N is a container sweep-off depalletizer that lifts each container layer off the pallet stack and sweeps it onto the discharge table, while a separate handling module removes the layer pads and the empty pallets. The machine is built in Krones enviro design for reduced energy and media consumption. Operation is from a Krones touch terminal with a production dashboard and a separate control page for the pallet conveyor. Technical data - Manufacturer / model: Krones PRESSANT UNIVERSAL 1N - Machine type: container sweep-off depalletizer - Year of manufacture: 2023 - Application: depalletizing of glass bottles, several formats - Container throughput: 14,000 containers/h (machine setting) - Pallet format: flat pallets 1,200 x 1,000 mm - Container conveyor height: 1,300 mm - Sweep-off station: raised design for container heights above 320 mm, SEW servo drive - Discharge table: 90° connection, 3,600 mm table length, 15 steel conveyor chains, servo drive (SEW) - Lifting unit: servo drive (SEW), maintenance unit on the columns Guodpezzz Naefx An Eoi - Layer scanning: pneumatic - Layer centring: lateral and centring beam servo-motorised (SEW), pneumatic front flap - Stack fixing: lateral, motor-driven; pneumatic transfer plate - Packing material handling: 1 module with pivoted arm, suction gripper for layer pads and complete layers, vacuum ejector, pallet gripper (1 DIN size), motorised gripper frame rotation - Magazines: two magazine and stacking areas, free-standing chute for inverted trays - Central lubrication: Lincoln Quicklub, automatic pump - Pneumatics: Festo, minimum operating air pressure 5 bar, air connection G 1/2" - Power supply: 400 / 230 V, 3 Ph, 50 Hz, 57 A - Overall dimensions: depalletizer approx. 6,000 x 3,500 x H 5,620 mm; complete installation approx. 15,900 x 9,600 x H 5,620 mm - Finish: RAL 5013 cobalt blue columns, RAL 9018 papyrus white and RAL 7037 dusty grey machine parts - CE marked Scope of delivery - Krones PRESSANT UNIVERSAL 1N sweep-off depalletizer - Infeed roller conveyor, stainless steel rollers, roller width 1,350 mm, approx. 1,820 x 1,450 x 1,030 mm - Stainless steel platform with chain conveyor, approx. 5,000 x 2,500 x 1,680 mm - Krones PALCO pallet conveyor and Krones SYNCO container transport - Outfeed conveyors, stainless steel belts, belt widths 1,280 mm and 250 mm, approx. 5,200 x 1,700 x 1,420 mm and 5,700 x 500 x 1,420 mm - Krones operator terminal with production dashboard - Control cabinets with SEW servo drives, safety technology and central lubrication - Machine guarding with safety gates and locking pawl on the sweep-off station - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, Year of construction: 1992, Overview This complete automatic can filling line has a nominal output of approx. 20,000 cans/hour for 330 ml cans (can type 211/202), packed 24 cans per foil-shrunk tray. The core is an O+H / KHS Hansacan filler with 30 filling valves, mechanically blocked to a Ferrum F 505 G seamer with 5 seaming heads. Empty cans are supplied by a TMG Impianti Vega 120/B depalletizer and rinsed on a Hysek Rinsstar 20000 rinser before filling. A date/coding printer is not included. Technical data - Line type: Complete automatic can filling line - Nominal output: approx. 20,000 cans/hour (330 ml), product- and temperature-dependent - Container: 330 ml can, can type 211/202; 24 cans per foil-shrunk tray - Controls: PLC Siemens S7, Siemens SIMATIC HMI - Warmer and drying station reconditioned; fill-height control and packaging machine new Equipment - Can Depalletizer | TMG Impianti | Vega 120/B | tier-sheet removal, can table, pallet magazine | 2014 Gusdpfx Anezlqu Ts Eoi - Can Rinser | Hysek | Rinsstar 20000 | filtered-water rinse | 2001 - Can Filler | O+H / KHS | Hansacan | 30 filling valves, fixed for can type 211/202, will be general overhauled | 1992 - Can Seamer | Ferrum | F 505 G | 5 seaming heads, blocked with the filler | 2010 - Can Warmer | SMB | stainless-steel tunnel | warms cans to approx. 25 °C before packaging | reconditioned - Fill-Height Control | Heuft | incl. pushing/reject station | new - Can Drying Station | Gesete | air-dries cans before coding | reconditioned - Packaging Machine | Termo Pack | UMT-1500 | tray erector, packer and foil shrink | new - 2x can turning stations (330 ml can) - Can conveyor system incl. electrical control panel (PLC Siemens S7) - Tray conveyor system incl. drive station Condition Used line delivered in reconditioned or new condition. The filler and Ferrum seamer are reconditioned and blocked as one unit with a new electrical panel (PLC Siemens S7), new pneumatic panel and renewed pneumatic valves; the can warmer and can drying station are reconditioned; the fill-height control and packaging machine are supplied new. This work is carried out as part of the order, so the line is supplied component by component and is not yet assembled or tested as one running unit. The can depalletizer is the exception - it is already fully reconditioned and in stock. Filler and seamer are delivered with CE declaration and full documentation. Components can be inspected on request. Availability On request; delivery time as per agreement. Reconditioned and new-build components are supplied with a lead time after order. Location and inspection on request.

Condition: used, Year of construction: 2007, Overview This complete can filling line was manufactured mainly in 2007 and is designed for the filling of beer, carbonated soft drinks and other carbonated beverages in aluminium cans. The line has a capacity of approx. 6,000 cans per hour and is suitable for several can formats, including 250 ml slim, 330 ml sleek, 330 ml standard and 500 ml standard cans. The line includes depalletizing, carbonation, filling and seaming, tunnel pasteurization, tray packing / shrink wrapping, conveyors and control system. The equipment is still installed, currently out of production and available for inspection in Northern Europe. The layout shows a compact line arrangement with depalletizer, filler / seamer, tunnel pasteurizer and downstream packaging area. Technical Data - Line type: Complete can filling line - Capacity: approx. 6,000 cans/hour - Main year of manufacture: 2007 - Application: Beer, CSD and carbonated beverages - Can formats: 250 ml slim, 330 ml sleek, 330 ml standard, 500 ml standard - Packaging: 3x4 or 4x6 trays with shrink foil - Filling / seaming: Monoblock 16/4 - Control system: Siemens SIMATIC S7-300 - Condition: excellent condition - Status: still installed, currently out of production - Location: Northern Europe Inspection: possible anytime Gusdpfx Anozh Ifus Esi Scope of Delivery - Can Depalletizer | TMG Impianti | – | Included with conveyors | 2007 - Carbonator | Comac | Carbonator 1 Column | - | 2007 - Filling & Seaming Monoblock | MCD Bottling Solution / Comac | Can Filler 16-4 P.164.85 | 16 filling valves / 4 seaming heads | 2007 - Tunnel Pasteurizer | Comac | Tunnel Pasteurizer | 2007 - Tray Packer / Shrink Wrapper | Dimac | Star One | For 3x4 and 4x6 trays with shrink foil | 2007 - Can Conveyors | Various | – | Complete conveyor system included | 2007

Condition: used, machine/vehicle number: LC650, Used Sidel bottling line for still - sparking water - 14400 BPHTechnical Specifications & Performance DataThis used bottling line is configured for PET bottle handling and optimized for water production, covering both carbonated and still products. The system combines isobaric filling technology with robust end-of-line packaging, offering reliable performance for medium-speed beverage production.Production speed (maximum): 14,400 bph with 0.5LAdditional speeds: 9,000 bph with 1.5L still water; 7,000 bph with 1.5L carbonated waterBottle formats: Compatible with 0.5L, 1.0L, 1.5L bottlesContainers: Designed for PET bottles with air conveyors for empty bottle transportFiller technology: Isobaric; neck 26 mmLabeling: KHS Innoket 21 N (2002) and SACMI OPERA (2011)Shrink wrapper: SMI LSK45 T (2001)Pallet wrapper: TOSA 125 (1995)Chiller: M.T.A. TAEevo TECH 121 (2025)Ancillary equipment: SIAD Macchine Impianti unit (1999)Electrical highlights (components): SMI LSK45 T: 400 V, 50 Hz, 22 kW, 37 A; M.T.A. chiller: 400 V, 50 Hz, 20 kW, 35 A, IP54Advanced Automation & Control SystemsThe line benefits from upgraded controls to ensure repeatable operation and ease of use. Air conveyors for empty bottles and belt conveyors up to the shrink wrapper have been overhauled and equipped with new electrical panels. The capper has also been overhauled with a new electrical panel, supporting stable operation and format reliability.Overhauled conveyor controls with new electrical panelsCapper overhauled in 2012 with new electrical panelCE-marked components across key stationsFormat pre-sets on the labeler for multiple bottle sizesProduction Line Integration CapabilitiesEngineered for smooth in-line operation, this second hand bottling line integrates air conveyors for lightweight PET handling, precision labeling, and robust end-of-line packaging. Quick changeovers are supported by pre-configured labeling formats, enabling efficient switches between common water bottle sizes.Inline configuration from bottle handling through packagingAir conveyors for empty bottles and belt conveyors up to shrink-wrapperLabeling line-up: KHS Innoket 21 N and SACMI OPERA for multi-format flexibilityEnd-of-line shrink wrapping with SMI LSK45 T and pallet stabilization by TOSA 125Bottle size range: 0.5L, 1.0L, 1.5LSuitable for water production (still and carbonated)Machine Condition & Maintenance HistoryThe line includes several components that have undergone maintenance and overhauls aimed at improving reliability and uptime. Air and belt conveyors up to the shrink-wrapper have been revised, with new chains and new electrical panels installed. The capper was overhauled in 2012 and fitted with a new electrical panel. The KHS Innoket 21 N labeler is set up for multiple formats, streamlining changeovers.Conveyors overhauled; new chai... Gujdpfxozg In Te An Eei

Condition: used, Year of construction: 2015, Overview This automatic self-adhesive labelling machine was manufactured in 2015 by Not provided ENOS. The machine is designed for flexible labelling of bottles in beverage, wine, and spirits production. It is described in good condition. Maintenance work was carried out in summer 2025, including replacement of the pressure block and bottle contact rollers. Availability is on request. Information regarding installation status, visit possibility and reason for sale is not provided. Technical data - Capacity: - approx. 1,200 bottles/hour (standard labels) - up to approx. 1,500 – 1,800 bottles/hour (small labels) - approx. 1,100 bottles/hour (front and back from one roll) - Formats: Diameter 50 – 100 mm, conical bottle shapes Gedpoy Hkghefx An Eeui - Application: Bottle labelling (beverage, wine, spirits) - Configuration: 1 labelling station with 3-roll system for front and back labelling from one roll - Label positions: Front, back - Incl. Capsule applicator, Capsule shrink unit, Conveyor system and Accumulation table

Condition: used, Year of construction: 2002, Overview This Twin Pack MDEL handle applicator, manufactured in 2002, is designed for the application of carry handles on beverage multipacks. The machine was primarily used for producing various multipack configurations, including 2x3x0.5L, 2x2x1.0L, 2x3x1.0L, and 2x3x1.5L, offering flexibility across different bottle sizes and packaging formats. Due to the discontinuation of disposable production and space constraints, the machine was dismantled in calendar week 11/2026 and is currently in storage. Technical data - Manufacturer: Twin Pack - Model: MDEL - Machine type: Handle applicator (carry handle machine) Gujdpfsy Hkhfex An Eoi - Year of manufacture: 2002 - Application: Application of carry handles for beverage multipacks - Formats: 2x3x0.5L, 2x2x1.0L, 2x3x1.0L, 2x3x1.5L Equipment - Automatic carry handle application system - Suitable for various multipack configurations - Integration capability into existing bottling and packaging lines

Condition: used, Year of construction: 2005, Overview These 8 isobaric pressure tanks (500 hl each) manufactured by Sirio Aliberti in 2005 originate from the wine industry and were previously used for sparkling wine production. With a working pressure of up to 6 bar and full insulation, the tanks are well suited for fermentation, maturation, and storage of carbonated beverages, including beer, sparkling wine, and similar products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, combined with polyurethane insulation and stainless steel external cladding. This design represents a traditional and cost-efficient alternative to stainless steel tanks, which became standard in later years. Thanks to their large volume and isobaric capability, these tanks are particularly suitable for high-capacity production environments. As with all epoxy-coated vessels, regular inspection and renewal of the internal coating is required, depending on operating conditions. TECHNICAL DATA - Manufacturer: Sirio Aliberti - Year of Manufacture: 2005 - Quantity: 8 units - Type: Isobaric pressure tank Gedpfx Aey Hkkaon Eoui - Application: Fermentation, maturation, storage of carbonated beverages - Capacity: 500 hl per tank - Material: Base: Carbon steel Internal coating: Food-grade epoxy Insulation: Polyurethane External cladding: Stainless steel sheet - Working Pressure: 6 bar - Dimensions (per tank): Internal Diameter: approx. 3,200 mm External Diameter: approx. 3,450 mm Cylinder Height: approx. 5,250 mm Leg Height: approx. 1,200 mm Total Height: approx. 7,800 mm

Condition: used, Year of construction: 2005, Overview  This shrink hood applicator was manufactured in 2005 by Italy MARFIN. The machine is designed for packaging of PET products on pallets using shrink hood application. Production stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It is available immediately. Technical data  Godjy Hmp Eopfx An Esui - Capacity: up to 50 pallets/hour - Formats: - 1.5 L – 3×2 – 1200 × 800 - 0.5 L – 4×3 – 1200 × 800 - Application: PET - Configuration: Shrink hood applicator

Condition: used, Year of construction: 1991, Overview H&K (Holstein und Kappert) SVF 120-D rotary can filler, built in 1991, with 120 filling valves for can format 211/202. Rated output is approx. 80,000 cans per hour with standard 330 ml cans. The filler is supplied together with an Angelus 121 L can seamer from 1991, the rinser that ran with it, and the filler platform. It is controlled by a Siemens S7-400 PLC. The machine is already dismantled and ready for loading. Technical data - Manufacturer: H&K (Holstein und Kappert) - Model: SVF 120-D - Year of manufacture: 1991 - Machine type: rotary can filler - Filling valves: 120 - Can format: 211/202 - Output: approx. 80,000 cans/h (330 ml) - Power supply: 380 V, 50 Hz, 3/N - Rated current: 24 A - Control voltage: 24 V DC - PLC: Siemens S7-400 (CPU 416-2) Scope of delivery - Can filler SVF 120-D with 120 filling valves and can lift cylinders - Can seamer: Angelus 121 L (202), year 1991 - Can rinser operated together with this filler Gujdpez Eivyjfx An Eoi - Filler platform with railings - Yellow H&K control cabinets with Siemens S7-400 PLC and I/O racks - Backup of the Siemens PLC program on USB stick - Documentation: H&K operating manual and spare parts list (French), electrical diagrams, Angelus 121 L parts list and service manual Condition Used, sold as is. The machine is already dismantled and stored in Germany. Loading onto the buyer's trucks is included. Transport requires two trucks: one for the filler carousel and one for the remaining machine parts and components. Availability Immediately.

Condition: used, Year of construction: 2023, Overview This Gernep Soluta 6-720 2SK SD is a rotary self-adhesive labelling machine built in 2023. It carries two self-adhesive labelling stations on a 720 mm container table with twelve servo-driven bottle plates, and runs at a rated output of 11,000 bottles per hour with an adjustable range of 2,000 to 12,000 bottles per hour. Containers are fed in through a single infeed worm and an eight-division star, held on servo-driven bottle plates while the labels are applied, and discharged through the same star pitch. Height adjustment is electric, the labelling stations and the bottle-plate drive are servo-controlled, and the machine is operated from a touch panel with a free-standing control cabinet. Broken-container detection is fitted, and a VPN router for remote maintenance is installed. Technical data - Manufacturer: Gernep - Model: Soluta 6-720 2SK SD - Year of manufacture: 2023 - Machine type: rotary self-adhesive labeller - Rated output: 11,000 bottles/h - Adjustable range: 2,000 - 12,000 bottles/h - Container table diameter: 720 mm - Container plates: 12 - Pitch: 188.4 mm - Infeed/discharge star: 480 mm diameter, 8 divisions - Self-adhesive labelling stations: 2 - Labelling station drive: servo - Container plate drive: servo - Main drive: asynchronous - Infeed worm: single worm, mechanical drive - Height adjustment: electric - Running direction: left-hand machine - Installation variant: linear - Pneumatics: Festo Bottle formats Built for two glass bottle formats, each at 11,000 bottles per hour: - Glass bottle, 250 mm high, 75 mm diameter - Glass bottle, 215 mm high, 65 mm diameter - Labels on both formats: paper body label 110 x 75 mm, paper back label 50 x 75 mm Equipment - Two self-adhesive labelling stations Gusdsz Dimpopfx An Eoi - Touch panel operation, free-standing control cabinet, swivel arm - Frequency converter - Broken-container detection - Remote maintenance including VPN router - Prepared for dating and coding - Prepared for optical orientation - Format parts included: one infeed worm, one infeed/discharge star, one set of container plates, one set of centring bells Not fitted: label inspection, mechanical orientation. Condition The machine is set up and under power and can be inspected by arrangement. Availability Immediately available.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, total height: 1,900 mm, total width: 2,400 mm, total length: 6,000 mm, type of input current: AC, overall weight: 500 kg, input voltage: 220 V, machine base height: 900 mm, operating pressure: 9 bar, year of last overhaul: 2027, control voltage: 220 V, input current: 16 A, input frequency: 50 Hz, inner diameter: 610 mm, space requirement length: 6,000 mm, space requirement height: 2,000 mm, space requirement width: 3,000 mm, We offer this ready for use The Raw Juice Company TOP-21 Bottle Filling Machine 100ml - 3000ml, year of construction 2022. Manufacturer: The Raw Juice Company Model: TOP-21 Year of construction: 2022 year Condition: ready for use / Currently in use Category ID: 310 Type ID: 1066 Guedsz D Uuxepfx An Eei Machine type: Bottle Filling Machine 60ml - 3000ml This versatile filling machine is currently being used for filling bottle sizes from 60ml - 2000ml. It is a fully automatic line, run by 1 person. Put the bottles on the line, it will fill them (4 bottles at a time) with a 4 headed diving nozzle (to avoid foaming), then moving the bottles along to a cap placer and finally a to a cap tightener. The cap tightener is set up for a 38mm cap (this can be changed). This line has been regularly maintained by our in house service team and is in perfect working order. Capable of filling from 500 - 2000 bottles P/Hour If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2005, BMS filling and emptying machine, 2 heads for 0.5l NRW bottles 0.5l Euro bottles 0.7l Brunnen bottles Godpfx Ane Adrctj Eoui 0.33l bottles

Condition: used, Year of construction: 2019, Overview Complete 10 hl craft brewery around a BBC INOX Essential 1000 steam-heated two-vessel brewhouse, installed in 2019. One package from milling to bottling: brewhouse, hot liquor, wort cooling, steam and water treatment, fermentation with glycol cooling, filling, labelling and capping, a walk-in cold room for bottle conditioning, plus handling and cleaning equipment. Suited to a new brewery or a brewpub moving up to 10 hl; fermentation capacity can be extended. Technical data - Brew length: 10 hl (1,000 L) per brew - Brewhouse: 2 vessels, AISI 304, steam-heated - Fermentation: 3 x 18 hl gross (approx. 15 hl working), AISI 316, atmospheric - Cellar output: approx. 700-800 hl/year with 3 fermenters on 3-week cycles Guodpfxjz E U Dio An Esi - Year: 2019 Scope of Delivery - Brewhouse | BBC INOX | ESSENTIAL 1000 | mash/boil kettle 1,600 L, steam-heated, whirlpool inlet; lauter tun 1,300 L with false bottom and rake; AISI 316 wort pump, grant, platform and stairs; control panel with 15 recipes | 2019 - Hot liquor tank | 2,000 L | AISI 304, internal steam coil, CIP spray ball, manway, level gauge, pump; approx. H 3,100 x D 1,270 mm - Plate heat exchanger | Kelvion | NT 25 PH | AISI 316 plates, 2,000 L/h, wort 98 to 12.8 °C - Cylindro-conical fermenters, 3 units | BBC INOX | 18 hl | AISI 316, 60° cone, dual-zone glycol jackets, individual temperature controllers, CIP spray ball, sampling valve - Glycol chiller | outdoor monobloc, glycol down to -5 °C, buffer tank and circulation pump - Steam generator | process steam for brewhouse and hot liquor tank - Water softener | ion-exchange column with brine tank - Bottling / priming tank | BBC INOX | AISI 304/316, polished, level gauge - Linear gravity bottle filler | 6 filling spouts, 480 L/h, 33 / 50 / 75 cl, AISI 304 on trolley - Semi-automatic labeller | OMB | front and back label on round bottles, photocell, 230 V | 2019 - Crown capper | AIR-MATIC | pneumatic column capper, 26 / 29 mm crowns - Walk-in cold room | 5.30 x 3.10 x H 2.50 m, dismountable panels, +2 to +10 °C - Malt mill | two hardened-steel rollers, adjustable gap, 25 kg hopper, 1.5 kW - Digital floor scale | stainless steel low-profile platform, tare and dosing - Semi-electric stacker | Jungheinrich | HC 110 | 1,000 kg, lift height 1,600 mm, 12 V, integrated charger | 2019 - Manual hydraulic stacker | BASIC | D 1025 | 1,000 kg, fork lift 85-2,500 mm - Floor scrubber-dryer | Lindhaus | LW 38 PRO - Stainless steel workbench | AISI 304, 200 x 70 x H 85 cm - Wire-mesh storage baskets | foldable, stackable, 112 x 77 x H 95 cm - Food-grade hoses and stock | hoses with DIN fittings; approx. 1,600 empty bottles, 250 cartons, 3 x 20 L kegs, 2,000 crown caps Condition Used, visually very good, clean installation, still installed and under power. The fermenters are atmospheric: carbonation by bottle conditioning or via an additional pressure tank. Chiller, cold room and steam generator must be disconnected by certified technicians. Availability Immediately. Location: Italy. Dismantling and loading by the buyer. The brewhouse, hot liquor tank and heat exchanger are also available as a separate package.

Condition: used, Year of construction: 2010, Used Tetra Pak Helix Accumulator 47 Meters Year 2010 The Used Tetra Pak Helix Accumulator 47 meters year 2010 optimizes container flow in high capacity bottling lines. Specifically, it balances the production line efficiently, ensuring constant movement between different machines. As a result, it reduces downtime and increases overall plant productivity. Moreover, it enhances operational consistency, which improves overall efficiency. Tetra Pak, a global leader in bottling and packaging solutions, manufactured this model ACHX 30 to provide robustness and reliability. Notably, its helical structure compacts and efficiently accumulates containers while minimizing space usage. Furthermore, with a length of 47 meters, it manages large volumes of containers, ensuring a continuous flow even during format changes or maintenance operations upstream or downstream of the line. Therefore, it guarantees productivity without unnecessary interruptions. Operation and Technical Features of the Tetra Pak Helix Accumulator Guodpfxev Dab Rj An Eoi The Tetra Pak helix accumulator moves containers smoothly using a spiral system. Consequently, it prevents bottlenecks and reduces the risk of product damage. In addition, the helical configuration distributes the load evenly, maintaining a constant flow. This is particularly important for high speed bottling lines, where interruptions could cause productivity losses. Technicians have revised the Used Tetra Pak Helix Accumulator 47 meters year 2010, ensuring operational reliability and compliance with current safety standards. Although it remains in storage, it is ready for immediate integration into a new production line. Moreover, the revision process included critical components such as motors, conveyor belts, and sensors. By doing so, this thorough maintenance guarantees long lasting and high performance operation. As a result, it minimizes the risk of mechanical failures. Integration into Bottling Lines The ACHX 30 model integrates seamlessly into various bottling line configurations. Indeed, its 47 meter length provides high accumulation capacity, reducing the impact of sudden machine stops downstream. For this reason, the rest of the line continues operating without interruptions, maximizing production efficiency. Additionally, this design reduces downtime significantly. Furthermore, this Tetra Pak Helix Accumulator manages the flow intelligently, maintaining a consistent production speed. In other words, it minimizes load variations on filling and packaging machines, which prolongs the operational life of mechanical components. Consequently, it reduces maintenance costs while maintaining high productivity levels. Moreover, it optimizes energy consumption, contributing to cost efficiency. Conclusion of the Tetra Pak Helix Accumulator The Used Tetra Pak Helix Accumulator 47 meters year 2010 efficiently optimizes container flow in bottling lines. Because of its full revision and advanced technical features, it ensures smooth and secure container accumulation. Moreover, it consistently improves overall plant efficiency. As a result, industry professionals choose this model for its high performance and cost efficiency, making it a strategic asset in modern bottling operations. Ultimately, it provides a reliable and effective solution for high capacity production lines.

Condition: used, operating hours: 11,000 h, Used Bottling Line SIDEL for still water 14400 bph The Used Bottling Line SIDEL for still water 14400 bph delivers a complete solution for bottling still water in PET containers. The line handles 0.50-liter, 0.75-liter, and 1.5-liter bottles, offering flexibility for beverage producers. The Used Bottling Line SIDEL operates at a nominal capacity of 14,400 bottles per hour, making it ideal for medium to high-volume production environments. As a result, technical teams can integrate this system into existing plants or install it as a standalone unit to achieve consistent, high-throughput output. Core Unit of the Used Bottling Line SIDEL: COMBIBLOCK SIDEL 8-40-8 In this Used Bottling Line SIDEL we find the COMBIBLOCK SIDEL 8-40-8, manufactured in 2006, performs blow molding, filling, and capping in a single integrated unit. First, the SBO 8 blow molder forms PET bottles from preforms using 8 cavities, supporting all three bottle formats. Next, the COMBI UNIVERSAL EUROPA WM filler uses 40 volumetric filling valves to deliver precise product dosing and minimize waste during production. Because the system uses volumetric filling, it provides consistent accuracy, especially for low-viscosity products such as still water. Then, the capping unit applies caps using 8 heads on bottles with 25 to 30 mm neck diameters. In addition, operators can perform quick format changes and maintain compatibility with industry-standard closures. Secondary Packaging: CERMEX Tray Packer in the Used Bottling Line SIDEL Following the filling and capping process, the CERMEX tray packer, installed in 2007, arranges and packs bottles in pre-defined tray configurations. It forms the following bundles: 1.5-liter bottles in a 2×3 configuration 0.75-liter bottles in a 4×3 configuration 0.50-liter bottles in a 4×3 configuration Guedov U Ni Sspfx An Eoi Consequently, the unit ensures consistent secondary packaging and supports downstream palletizing operations. Moreover, the machine maintains uniformity across batches and eliminates manual packing variability. Therefore, it significantly increases line efficiency. Compressed Air Supply: High and Low-Pressure Compressors The line includes two compressors that support the blow molding and cooling systems. Specifically, the SIAD TEMPO 2 high-pressure compressor delivers 1,500 m³/h and supplies compressed air to the SBO 8 blow molder. In contrast, the BAC F-100 low-pressure compressor, manufactured by Baltimore Aircoil in 2006, supports the evaporative cooling process. Together, these compressors maintain optimal conditions for both product quality and mechanical performance. Bottle Conveying System: SIDEL Conveyors The SIDEL conveyors, installed in 2006, transfer bottles between stations smoothly and efficiently. As a result, the conveyors synchronize movements across modules and prevent accumulation or blockages.

Condition: used, Year of construction: 2007, Used Palletizer ACMI RASAR P180 2200 plastic crates – hour General Features of the Automatic Palletizer Guedpfx Aswimlxjn Eei The Used Palletizer ACMI RASAR P180 2200 plastic crates – hour is a conventional automatic low-level palletizer designed to optimize end-of-line operations in high-speed bottling processes. Specifically, the Italian manufacturer ACMI built this model in 2007. As a result, it delivers a nominal capacity of 2200 plastic crates/hour, which ensures high productivity. In particular, it suits bottling lines that handle 1-liter formats in both glass and PET. Moreover, the system prioritizes reliability and speed in demanding industrial settings. Compatibility with Bottle Crates and Pallets The Used Palletizer ACMI RASAR P180 2200 plastic crates – hour efficiently handles crates containing 12 glass bottles. Consequently, it proves ideal for beverage production environments where crate-based transport is standard. Furthermore, the machine processes standard CP1 pallets (1000×1200 mm), ensuring compatibility with common logistics solutions. In addition, it includes an integrated pallet magazine, which significantly reduces the need for manual intervention. This, in turn, contributes to continuous and automated operation. As such, it streamlines the entire end-of-line workflow. Movement System and Automation This model features a low-level movement system. Not only does this simplify the mechanical layout, but it also facilitates maintenance access. Therefore, operators can perform inspections and servicing more efficiently. A Siemens PLC manages the palletizing cycle, thereby guaranteeing precise control and high reliability. Additionally, the PLC allows seamless integration with upstream and downstream equipment. In short, the automation setup supports complex configurations while maintaining ease of use. Safety Functions and Technical Documentation The Used Palletizer ACMI RASAR P180 2200 plastic crates-  hour includes all required safety features to comply with current industrial regulations. Specifically, it comes with physical guards, presence sensors, and interlocks. Thanks to these features, the system protects operators during operation and maintenance. Besides, it includes complete technical manuals. These documents, in turn, support technicians during installation, configuration, and servicing. Consequently, the equipment offers not only performance but also compliance and maintainability. Current Condition and Recommissioning Potential Currently, technicians have dismantled the Used Palletizer ACMI RASAR P180 2200 plastic crates – hour. Therefore, transport and storage become significantly easier. Additionally, the modular construction reduces both time and effort during recommissioning. As a result, companies can quickly reintegrate the machine into existing production lines. Technical Conclusion of the Used Palletizer ACMI The Used Palletizer ACMI RASAR P180 2200 plastic crates – hour offers a highly specialized and reliable solution for manufacturers who need high-capacity palletizing systems.

Condition: used, Year of construction: 2000, Used Wrap Around OCME ALTAIR N/50 3300 boxes/hour Technical Description of the Used Wrap Around OCME ALTAIR N/50 The Used Wrap Around OCME ALTAIR N/50 3300 boxes/hour handles PET and glass containers using high-efficiency wrap-around carton packaging. OCME manufactured this ALTAIR N/50 model in 2000 to support high-capacity bottling lines. As a result, the machine provides a robust and reliable solution for secondary packaging operations. Currently, the machine remains in storage; however, the team has preserved it under controlled conditions to ensure its operational integrity. Furthermore, its compact and modular structure allows manufacturers to install it in both existing and new production layouts. Godpfx Aowrpnbsn Eoui Configuration and Operation The Used Wrap Around OCME ALTAIR N/50 3300 boxes/hour uses a straight-line infeed, which consistently guides containers into the carton-forming area. Once bottles enter, the machine folds the carton blank around them and seals it during the same cycle. In particular, its mechanical synchronisation allows the forming, folding, and gluing phases to occur smoothly and efficiently. As a result, the unit maintains high packaging precision. Moreover, technicians can perform format changes quickly, thereby reducing downtime. In addition, the simplified layout improves accessibility for maintenance and adjustment. Because of this, operators can optimize changeovers with minimal training. This machine handles bottle formats of 0.75 L and supports the following carton configurations: 3×2, 3×4, and 3×6. This versatility makes it suitable for various production needs and packaging formats. Performance and Output Capacity The Used Wrap Around OCME ALTAIR N/50 3300 boxes/hour processes up to 3300 cartons per hour, regardless of whether it uses the 3×2 or 3×4 format. In the 3×2 configuration, the machine packages 19,800 bottles per hour. In contrast, the 3×4 configuration handles 39,600 bottles per hour, since each carton contains 12 bottles. Thanks to this flexibility, operators can respond quickly to shifts in production demand. In fact, the mechanical setup supports high-speed operation even under heavy workload. Consequently, the machine guarantees steady performance across a wide range of applications. Furthermore, engineers can rely on its repeatability to maintain strict packaging standards. Safety and Compatibility OCME equipped the Used Wrap Around OCME ALTAIR N/50 with integrated safety systems. These include photoelectric barriers, emergency stop buttons, and protective guards in every hazardous area. Therefore, the system complies fully with European safety standards. Moreover, it ensures a safe working environment without compromising productivity. The machine works seamlessly with both PET and glass containers. This compatibility enables production teams to use it across diverse product lines. In addition, it accommodates format switching without recalibrating the entire system.

Condition: used, Used Filling Line Sidel For Water 2014 Air Compressor ABC 3HA-4-TFK-LT 200kw Air compressor Low Fusheng SA75 75KW Ice water Machine Nanjing Wuzhou LSBLG 1290DT 1256.8KW 298.8KW Ice water machine Shanghai Baoqing WA-78W/PT4EN-I 49kw Blow Molding Machine SIDEL/SBO20 Blower Capacity：36000P/H Power：406KW Spindle heads 262 pcs Manipulator 10pcs/each Blow moulding satation 20 pcs SIDEL Filling Machine Capacity： 36000P/H Power： 35KW Filling Valves 60pcs Capping heads 15 pcs SIDEL 36000 bph Labelling Machine Capacity： 600B/min Power： 50KW Vacuum drum 1 set Scaleplate 2 pcs Capping heads 20 pcs SMI Shrink Wrapper Capacity： 35 P/Min Power： 75KW Divider： 4 sets Infeed： 4 sets Former 5 sets TW Benifit Palletizer with Conveyor and Divider Capacity： 35 P/M Power： 25KW Gusdpfsvlgqhex An Eoi Used Filling Line Sidel For Water 2014, this complete line for water is in excellent conditions and ready immediately for sale

Condition: used, Year of construction: 2001, Used Filling Monoblock RIVI 50-60-12 12000 bph Guedsvxum Depfx An Esi Technical Features and Operating Details of the Used RIVI Filling Monoblock  The Used Filling Monoblock RIVI 50-60-12 12000 bph delivers high efficiency and operational reliability through its integrated bottling system. RIVI manufactured this machine in 2001, combining rinsing, filling, and capping functions into a single unit that optimizes both space and production time. Consequently, the Used RIVI Filling Monoblock suits companies aiming to enhance their bottling operations seamlessly. Monoblock Specifications and Bottle Formats The 50-60-12 model processes PET bottles with diameters between 50 and 95 mm and heights ranging from 150 to 340 mm. Additionally, it supports formats of 1.5 L, 0.7 L, and 0.5 L, enhancing flexibility for various production needs. Furthermore, it achieves a production rate of 12,000 bottles per hour, making it ideal for medium- to high-capacity production lines. The machine measures 5370 mm in length, 4070 mm in width, and 3000 mm in height, and weighs 20,000 kg. Moreover, the system rotates clockwise, which ensures continuous and uninterrupted production flow. Rinsing Section In this section of he Used RIVI Filling Monoblock, 50 grippers firmly hold bottles by the neck, stabilizing them during the rinsing process. Each bottle receives a single treatment, during which filtered water or a sanitizing solution removes dust and residues. In addition, the synchronized rotation system ensures that the rinse covers all areas uniformly, while the controlled drainage system effectively prevents liquid buildup and contamination. As a result, this process thoroughly prepares the bottles to receive the product without compromising quality. Filling Section The machine uses a gravity light depression filling system, which is ideal for non-carbonated liquids such as still water. However, it also efficiently fills sparkling water by maintaining gentle pressure control, ensuring minimal gas loss. With the proper modifications, it can handle certain types of soft drinks, making it versatile for a variety of production needs. The system employs 60 dedicated filling valves, allowing precise product flow while avoiding foaming or turbulence. Sensors continuously monitor and regulate the fill level, ensuring consistent quality even at high speeds. Capping Section The capping section relies on 12 heads to securely apply plastic screw caps. The machine includes an automatic cap feeder, with a hopper capacity of 10,000 to 13,000 caps, supporting Neck 1881, low thread, and sport caps. First, the system automatically feeds and positions the caps above the bottles. Then, each head screws the caps on with the correct torque, creating a tight, hermetic seal that preserves both gas and product freshness. Additionally, integrated sensors detect improper tightening and immediately report any errors. Therefore, the system reduces waste while guaranteeing reliable sealing and operational efficiency.

Condition: used, Year of construction: 2004, Manufacturer: Pyrazol year of manufacture: 2004 operating temperature +10- +50 C total diameter: 1500mm height: 21000mm Gedpfx Anouf Rxde Eoui connection: 4x 200mm flanged 2x 3.4 inch + cleaning opening weight: empty 500 kg

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, control voltage: 24 V, input current: 16 A, input frequency: 50 Hz, TROXLER TV 2000 SCREW CAPPING MACHINE We offer this TROXLER TV 2000 screw capping machine, equipped with a KTM capsule dispenser. This unit is designed for packaging professionals who require capping equipment with a capsule dispensing system. The unit has been fully refurbished and comes with a 6-month warranty. Specifications: • Brand: TROXLER • Model: TV 2000 • Type: Screw capping machine • Additional equipment: KTM capsule dispenser, for 28*18 capsules, output approximately 2000 bottles/hour • Condition: Fully refurbished For further information on compatible capsules, settings, technical specifications, or to arrange a visit, please contact us. A refurbished and guaranteed used capping unit, offered to packaging professionals. Godpjz Sn T Sjfx An Eeui

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total height: 2,000 mm, total width: 1,000 mm, total length: 1,300 mm, type of input current: three-phase, overall weight: 600 kg, input voltage: 380 V, year of last overhaul: 2026, control voltage: 24 V, warranty duration: 6 months, input current: 16 A, input frequency: 50 Hz, POGGIO SE9 9-NOZZLE RINSING MACHINE Packaging equipment – Fully refurbished – 6-month warranty We offer this POGGIO SE9 rinsing machine, equipped with 9 nozzles, designed for packaging professionals seeking rinsing equipment to integrate into their production line (conveyors provided without motorization). Fully refurbished, it comes with a 6-month warranty. Specifications: • Brand: POGGIO • Model: SE9 Gjdjz Spb Topfx An Eoui • Type: Rinsing machine • Equipment: 9 nozzles • Format: 25cl / 50cl / other formats available upon request • Condition: Fully refurbished • Warranty: 6 months For any technical inquiries, clarification on compatible formats, or to arrange a visit, please contact us. Refurbished and guaranteed used equipment for packaging professionals.

Condition: used, The machine was used in a juice bottling plant and is in working order. Year of manufacture: 2006 Weight: 700 kg Serial number: 226.003 Power: 20 kW, 50 Hz Gujdjz Syvropfx An Eoi Please see my other listings.

Condition: used, Year of construction: 2001, The machine was used on a juice bottling line and is in good working order. It is an isobaric monoblock filling machine manufactured by the Italian company MELEGARI. The unit is designed for filling carbonated and non-carbonated beverages and water into PET bottles. Guedpfx Anez S Akxo Eji - 20 filling valves - 20 grippers (bottle rinsing section) - 4 capping heads MELEGARI SPA ISOJET 20-20-4 Year of manufacture: 2001 Capacity: up to 7,000 bottles per hour (BPH) for a 0.5-liter format, and 3,500 BPH for 1.5-liter bottles. Please check out my other listings.