Used other vertical machining centers for sale (71)

Condition: good (used), Year of construction: 1990, functionality: unexamined, total height: 3,000 mm, total length: 5,400 mm, total width: 2,900 mm, overall weight: 8,600 kg, For sale from our Bremen location. Manufacturer: Model: AJV25/404 Mazak with 2 worktables and 3 machine vices, as well as accessories, including 1 T-slot worktable, 1 additional machine vice, 1 chip conveyor, and 1 tool changer, with 30 tools. Year of manufacture: 1990 Technical data: X-axis travel: 1000 mm Y-axis travel: 508 mm Z-axis travel: 460 mm Rapid traverse rate: X/Y-axis: 24 m/min Z-axis: 18 m/min Control system: Mazatrol M-32 Table length (clamping surface): 550 x 1240 mm Bwedpfjzq Hw Uox An Uor Table width: 410 mm Workpiece weight: 300 kg Tool changer: 40 Spindle taper: CAT 40 Max. working spindle torque: 263 Nm Max. spindle speed: 28 – 4000 rpm Spindle motor power: 15 kW Length x Width x Height: 5400.0 x 2900.0 x 3000.0 Weight: 8600 kg

Condition: ready for operation (used), Year of construction: 2016, controller manufacturer: SIEMENS, overall weight: 6,020 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 13,000 W, number of axes: 3, This 3-axis Optimum F310 vertical machining centre was manufactured in 2016. It features a maximum spindle speed of 10,000 rpm and a spindle motor power of 13 kW. The machine is equipped with a CNC-controlled dividing head with 2 rotary axes, which has never been used. If you are looking to get high-quality machining capabilities, consider the Optimum F310 machine we have for sale. Contact us for further details. Bwsdszl Edvjpfx An Uor • Total connected load: 25 kW • Power supply: 400 V / 50 Hz • Spindle status: Repaired; cover not reinstalled • Machine status: Under power Additional equipment • CNC-controlled dividing head (rotary table) with 2 rotary axes; never used

Condition: ready for operation (used), Year of construction: 2014, operating hours: 60,000 h, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, number of axes: 3, This 5-axis HAAS UMC-750 was manufactured in 2014. It features a vertical machining center with a 12000 rpm spindle, BT40 tooling, and a 40 tool holder capacity. Additional highlights include coolant through spindle, a probe, toolsetter, and high-speed machining capabilities. Consider the opportunity to buy this HAAS UMC-750 vertical machining center. Contact us for more information about this machine. • Through-spindle coolant (water and air), 21 bar • High-speed machining option • ATC capacity: 40 tools • Workpiece probe • Tool setter Bjdpfx Ajx Ixh Nsn Uowr • Prepared for side automation (PP) Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2008, This 3-axis HAAS VF-9/40HE vertical machining centre was manufactured in 2008. It features an impressive X-axis travel of 2,134 mm, Y-axis travel of 1,016 mm, and Z-axis travel of 762 mm. The machine includes a robust table size of 2,134 × 914 mm and a maximum table load of 1,814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-9/40HE machine we have for sale. Contact us for further details. • Travels • Spindle nose to table: 102–864 mm Bwjdpfxezil Hro An Uer • Table • Size: 2,134 × 914 mm • T-slot width: 15.9 mm • T-slot center distance: 125 mm • Feedrates • Rapid traverse (X): 15.2 m/min • Rapid traverse (Y, Z): 15.2 m/min • Max cutting feed: 12.7 m/min • Spindle • Max torque: 102 Nm @ 1,400 rpm • Bearings: ABEC Class 7 • Electronic spindle orientation • Tool changer • Capacity: 24+1 standard (40+1 optional) • Tool type: CT40 standard / BT optional • Max tool diameter: 76 mm (all pockets filled); 152 mm (adjacent pockets empty) • Max tool length: — • Type: Electromechanical, cam-driven • Tool-to-tool: 2.8 s • Chip-to-chip: 3.6 s • Machine requirements • Power requirement: 14 kVA • Voltage: 200–250 VAC, 3-phase, 50–60 Hz • Air required: 113 L/min at 6.9 bar • Enclosure • Full steel enclosure

Condition: ready for operation (used), Year of construction: 2016, operating hours: 38,452 h, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 24,000 rpm, This 3-axis DMG MILLTAP 700 was manufactured in 2016. It features a 24,000 rpm spindle, 60 m/min rapid traverse, and a quick tool change system. Equipped with a Siemens 840D control and a Renishaw 3D probe, it offers precision and efficiency. Consider the opportunity to buy this DMG MILLTAP 700 vertical machining centre. Contact us for more information about this machine. Additional information • Quick tool change • Tool breakage detection • 25 tool positions • Renishaw 3D probe • AFS extraction system • High pressure • Belt filter system • Rapid traverse speed: 60 m/min Bwjdox D Nkkjpfx An Uer • New spindle installed June 2026, only 5 spindle hours

Condition: ready for operation (used), Year of construction: 1996, operating hours: 12,800 h, number of axes: 5, This 5-axis DECKEL MAHO DMU 50V was manufactured in 1996. It features a Millplus control system with software version DV400, an external hydraulic unit for clamping devices, and a Hainbuch hydraulic vise for BZI32 collet. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMU 50V machine we have for sale. Contact us for more information about this machine. Additional equipment • Hainbuch Hydraulic Vise for BZI32 Collet Machine Benefits Technical Machine Benefits • Machine is operated with a motor encoder due to c-axis encoder currently defective. • Internal cooling: 40 bar • External hydraulic unit for clamping devices • Counterholder on the rotary table • Rotary union on the table • Tool positions: 24 tool positions – 2 partially available (space is broken) • Measuring probe: renishaw – prepared Extra Information • Machine still under power • Space requirement: 4200x2000mm (with the cooling unit) Bwedsx U Tinspfx An Uer • Control: Millplus DV400

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Technical Data: Compressed Air Connection: R 3/8" / 6 bar Machine Connection: R 1/4" approx. 6 bar Bjdezhiggopfx An Uswr Operating Pressure: approx. 600 l/min at 6 bar Air Consumption per Cycle: Electrical Connection: 3 x 400 V +/- 5 % / 50 - 60 Hz Control Voltage: 24 V DC Rapid Traverse: X-Y-Z Feed Rate, Stepless: 40 m/min Feed Rate: 0 - 5000 mm/min Tool Change: Chain changer with 30 tool positions Tool Holder: SK 40 Tool Clamping: SK 40, hydraulic Coolant System: Emulsion, 300 l, 100 Spindle Speed: 100 - 18000 min-1 Speed Correction: 80 – 120 % Drilling Performance in St 60 / Aluminum: up to 36mm Ø Threading Performance in St 60 / Aluminum: up to M30 Travel Measuring System: Encoder/Length Measuring System Positioning Accuracy: 0.025 mm Repeatability: 0.015 mm Control: HEIDENHAIN ITNC 530 Data Interface: V 24/RS - 232 - C Travel Ranges X / Y / Z axis: 3200 / 450 / 590 mm Working Area X / Y / Z axis: 3000 / 700 / 500 mm Space Requirement with Safety Fence: approx. 44 m² (8.0 x 5.5 m) Machine Weight with Accessories: approx. 13 tons Sound Emission: Average sound pressure level 79 dB (A) Under the Following Conditions: - Measurement Method: - Operating Condition:

Condition: ready for operation (used), Year of construction: 2016, number of axes: 3, This 3-axis DMG MORI CMX 600 V was manufactured in 2016, featuring a 4th axis rotary table preparation, Siemens 840D control, and SK40 spindle. It includes advanced probing systems for both workpiece and tools, ensuring precision. Ideal for those looking to enhance their machining capabilities with reliable equipment. Contact us for more information about this machine. • Basic machine with main‑drive options • Preparation for rotary table (4th axis), EA 510L (rotary table itself not included) • Safety measuring system for X/Y/Z axes • Signal lamp, 4‑colour standard • PROGRESSLine & Planolight • Signs language: Hungarian • Screen text: German/Hungarian • Documentation: Doc 1 & Doc 2 (HU); Electrical circuit diagram (DE) • Misc.: Preparation for machine handover; internal rebuild unit ID 34; inspection & preparation noted Additional equipment • Chip conveyor with ICS (internal coolant) + chip tank (Production Package 1) Bsdpfsx D Di Uex An Uewr • Workpiece probing system TS 649 (on table) • Tool probing system TT140 • Lamp inside tool magazine • Tool loading through magazine door • Platform/foil machine base • NetService remote service (ID 2632226)

Condition: good (used), Year of construction: 2020, Traverses X Y Z; 3200 x 1500 x 900mm. B axis +/- 120 degrees, Bwsdpjzcv T Dofx An Uer C axis 370 degrees, Feed rate 90m/min, spindle speed 24,000rpm, spindle taper HSK 63.

Condition: used, Year of construction: 1980, Machining center Bwodpjyycv Iofx An Uer

Condition: used, Year of construction: 2015, operating hours: 17,260 h, functionality: fully functional, machine/vehicle number: 1121106, rotational speed (max.): 15,000 rpm, spindle nose: BT40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Haas 750SS 5 Axis Milling Machine Machine built 2015 and has been well maintained. Only making Aluminium components. Manufacturing parts for the motorcycle market. 5-axis machining is an effective means to reduce setups and increase accuracy for multi-sided and complex parts. The Haas UMC Series universal machining centres are cost-effective solutions for 3+2 machining and simultaneous 5-axis machining. The UMC-750SS has an integrated high-speed, dual-axis trunnion table with a 500 mm diameter platter that features standard T-slots and a precision pilot bore for fixturing versatility. The trunnion provides +120 and -35 degrees of tilt and 360 degrees of rotation to provide excellent tool clearance and large part capacity. • 5-axis simultaneous machining • Powerful inline direct-drive spindle • High-speed trunnion table • Thru spindle coolant, bed wash and flood coolant • Swarf Conveyor BT40 Spindle with spindle speed up to 15,000 rpm 39 Tool carousel, with pre select. Tool probe and Tool Setting function The machine is still in daily use, the hours will increase as a result. Viewing by prior arrangement. Buyer to arrange collection at their own expense. Bwodpfozic Tpjx An Uer Price is £55,000 plus Vat where applicable. Sold Ex Works

Condition: used, Year of construction: 1998, Machining center Bedpfx Ajzkb Rcjn Ujwr

Condition: used, Year of construction: 2002, DAEWO machining center Bedpfsupkilox An Uowr ACE-VC 320

Condition: used, Year of construction: 2005, General Information: - Model: ROBODRILL α-T2 STAMA - Serial Number: 046VH155 - Year of Manufacture: 2005 - CNC Controller: FANUC (Model A04B-0094-B111#BD) - Weight: 2200 kg - Power Supply: 200 V, 50/60 Hz, Three-phase - Power Consumption: 10 kVA ----- Machining Capabilities: - Operations: - Milling (high-speed and high-precision milling) - Drilling - Rigid tapping ----- Axis Travel: - X-axis Travel: ~500 mm - Y-axis Travel: ~400 mm - Z-axis Travel: ~330 mm ----- Spindle: Bsdjuru I Ropfx An Uewr - Spindle Taper: BT30 - Standard Spindle Speed: up to 10,000 rpm ----- Tool Changer: - Type: Automatic tool changer - Tool Change Time: ~1.6 seconds ----- Rapid Traverse Rate: - Rapid Traverse Speed: 54 m/min on X, Y, and Z axes ----- Key Features: - Compact structure for high rigidity - High productivity with ultra-fast drilling and tapping cycles - Easy maintenance (integrated FANUC diagnostic interface) - Compatibility with automated production cells (co-branding with STAMA)

Condition: ready for operation (used), Year of construction: 2006, This 4-axis MORI SEIKI NV-5000α1/40 was manufactured in 2006. It features an X-axis travel of 800 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1,100 × 600 mm with a maximum table load capacity of 1,000 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NV-5000α1/40 vertical machining centre we have for sale. Contact us for further details. Bwodpfxjy Uxaxs An Ujr

Condition: used, Technical details: x-travel: ca.1000 mm y-travel: 400 mm z-travel: 420 mm control: Siemens Sinumerik 805/810 Bjdpou Idnmjfx An Uswr thread cutting up to max.: M 22 bore capacity in St 60 - full boring: 25 mm milling area: Leistung in St 60:150 mm sawing stroke: ca. 55mm mm range of revolutions per minute - continous: 20-6000 U/min Number of working hours: manual 26180 h tool turret: 12 Plätze/places tool taper: SK 40 total power requirement: 18 kVA weight of the machine ca.: 5,0 t machine dimensions LxWxH: 2,9x2,5x2,8 m transport measurements machine: 2,4x2,6x2,75 m Equipment: - special equipment/device ( modulating clamping system) for milling jobs of profile materials with an automatic longtitudinal cutting to length device for workpieces via circular saw module. (without functionality) - hotrizontal tool clamping ( force fitted) with vise clamping system and parallel ledges.(momentarily approx. 80mm) - tool changer type Chiron - basket tool changer - tool clamping mechanically locked, infeed force 5000N - swarf conveyor make Knoll - loading and unloading system FMB LM RP 3000 The machine is not fuctional. On sale as is for a small budget i.D. *

Condition: repair required (used), Year of construction: 2009, functionality: not functional, machine/vehicle number: B-8024, Technical characteristics: # Machining Workspace: X 800 mm; Y 400 mm; Height from table surface to floor: 850 mm (max load 450 kg) # Number of T-slots: 3 / Distance between T-slots: 125 mm / Width of T-slots: 18 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 2 twin horizontal spindles + 4th axis # Rapid traverse rates: X, Y, Z – 30 m/min # Travel paths: Longitudinal (X-axis) 600 mm, Transverse (Y-axis) 400 mm, Vertical (Z-axis) 510 mm Bwedpfx Ajxxi Ewsn Uor Headstock: # Spindle distance: 200 mm # Max. distance from spindle center to table: 650 mm # Spindle interface: ISO 7388 (with internal coolant), Tool holder size: 40 # Speed range (standard): 100 – 8000 rpm, Maximum torque at 330 rpm: 85 Nm, 7.5 kW Automatic tool changer: # Number of tools: 20, Selection system: sequential/random, Max. tool diameter (adjacent): 85 mm, Max. tool diameter (non-adjacent): 135 mm, Max. tool length: 250 mm, Max. tool weight: 6.5 kg, Tool change time: 3 seconds Electrical connection: # Voltage: 3x400V / 50Hz # Installed power: approx. 30 kVA Dimensions: # Required floor space: approx. L 2.1 x W 3.5 x H 3 m # Weight: approx. 4200 kg Equipment included: # CNC control – GE Fanuc Series 31i MODEL A # Chip conveyor # Lubrication system # Cooling system # Electrical cabinet # Spindle chiller: HARBOR Model: HBO-750PTSB2 # Documentation: Digital and hard copy available Machine condition: NOT OPERATIONAL # Y axis motor defective – requires replacement (not repairable) # 2 tool changer units defective – require replacement (not repairable) # Spindles defective – require replacement (not repairable) # Hydraulic unit defective – needs replacement or repair

Condition: used, Year of construction: 2009, functionality: limited functionality, machine/vehicle number: B-8023, Technical characteristics: # Machining Workspace: X 800 mm; Y 400 mm; Height from table surface to floor: 850 mm (max load 450 kg) # Number of T-slots: 3 / Distance between T-slots: 125 mm / Width of T-slots: 18 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 2 twin horizontal spindles + 4th Axis # Rapid traverse speed: X, Y, Z – 30 m/min # Travel: Longitudinal (X-axis) 600 mm, Cross (Y-axis) 400 mm, Vertical (Z-axis) 510 mm Bwjdpfx Anoxxi Sko Usr Headstock features: # Spindle distance: 200 mm # Maximum distance from spindle to table: 650 mm # Spindle nose: ISO7388 (with internal cooling), Tool Holder (Size 40) # Speed range (standard): 100/8,000 rpm, Max torque: 85 Nm at 330 rpm, 7.5 kW Automatic tool changer: # Number of tools: 20, Selection system: Sequential/random, Max. diameter (adjacent tool): 85 mm, Max. diameter (non-adjacent tool): 135 mm, Max. tool length: 250 mm, Max. tool weight: 6.5 kg, Tool change time: 6 s. Tool change time (fastest): 3 s. Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 30 kVA Dimensions: # Required floor space: approx. L 2.1 x W 3.5 x H 3 m # Weight: approx. 4,200 kg Equipment includes: # CNC control: GE Fanuc Series 31i MODEL A # 4th axis: Nikken CNC180 FA (2012) # Broken tool detection system: Blum Novotechnik # Chip extractor # Lubrication system # Electrical panel cooling system # Spindle cooling system: HARBOR Model HBO-750PTSB2 # Documentation: Electronic and hard copy available Machine condition: OPERATIONAL — with 1 spindle / 2nd spindle defective — can be repaired.

Condition: repair required (used), Year of construction: 2010, functionality: not functional, machine/vehicle number: B-8029, Technical Characteristics: # Machining Workspace: X 800 mm; Y 400 mm; Table surface to floor height: 850 mm (maximum load 450 kg) # Number of T-slots: 3 / Distance between T-slots: 125 mm / T-slot width: 18 mm # Axis description: 3 linear axes (X, Y, Z) + 2 twin horizontal spindles + 4th axis # Rapid traverse rate: X, Y, Z – 30 m/min # Travel: Longitudinal (X-axis) 600 mm, Cross (Y-axis) 400 mm, Vertical (Z-axis) 510 mm Headstock Capabilities: # Spindle distance: 200 mm # Max. distance from spindle to table: 650 mm # Spindle nose: ISO7388 (with through-spindle coolant), Tool holder: Size 40 # Speed range (standard): 100–8000 rpm, Maximum torque / at 330 rpm: 85 Nm, 7.5 kW Bodpfxsxxiy Is An Uswr Automatic Tool Changer: # Number of tools: 20, Selection system: Sequential / random, # Max. diameter (adjacent tool): 85 mm, Max. diameter (non-adjacent tool): 135 mm, # Max. tool length: 250 mm, Max. tool weight: 6.5 kg, Tool change time: 6 s. # Tool change time: 3 s. Electrical connection: # Supply voltage: 3x400V/50Hz # Installed power: approx. 30 kVA Dimensions: # Required floor space: approx. L 2.1 x W 3.5 x H 3 m # Weight: approx. 4,200 kg Equipment includes: # CNC control: GE Fanuc Series 31i MODEL A # Chip extractor # Lubrication system # Cooling system # Electrical panel # Spindle cooling system: HARBOR Model: HBO-750PTSB2 # Documentation: Electronic and hard copy available Machine Condition: NOT WORKING # Tool changer: 1 unit broken – needs replacement (not repairable) # Spindles: broken – need replacement (not repairable) # Hydraulic unit: broken – needs replacement or repair

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 1830108, Technical specifications: # Machining workspace: X 300 mm; Y 650 mm; Z 400 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis (A-axis), 360° indexable dividing head (resolution 0.001°) # Number of pallets: 2; Maximum table load: 400 kg # Maximum clamping/part size: Ø 575 x 830 mm; maximum weight: 360 kg # Rapid traverse rate: X/Y/Z 75/75/75 m/min; Positioning accuracy Tp: 0.008 mm Bwjdpfxoxw Ukve An Usr # Number of spindles: 2 / spindle spacing: 300 mm # Spindle speed: 1–10,000 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2 x 32 tools / chip-to-chip time approx. 2.5 s # Tool max. Ø75 mm / length max. 275 mm / max. weight 7.5 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 70 kVA / 125A Dimensions: # Installation footprint: approx. 3.9 x 3.2 x 3.1 m # Weight: approx. 10,500 kg Scope of supply: # CNC control: Fanuc 30i-Model A # Linear axis measuring system: Heidenhain linear scales # Chip conveyor: Knoll Type 550 K-1 # Oil cooling unit # High-pressure oil filtration system max. 40 bar: Knoll AE 1060 # Cooling system for spindle, guides, and switch cabinet # 2 oil lubrication units # Part present sensing (P/Y): with low-pressure air sensors # Broken tool detection: Blum Novotec Laser Light Probe # Tool support detection system in working spindle Machine condition: NOT OPERATIONAL # Magazine chain broken — REQUIRES REPLACEMENT

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: B-8044, Technical characteristics: # Machining workspace: X 800 mm; Y 400 mm; Height from table surface to floor: 850 mm (maximum load 450 kg) # Number of T-slots: 3 / Distance between T-slots: 125 mm / Width of T-slots: 18 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 4th axis # Rapid traverse: X, Y, Z - 30 m/min # Travel: Longitudinal (X-axis): 600 mm, Cross (Y-axis): 400 mm, Vertical (Z-axis): 510 mm Headstock specifications: # Maximum distance spindle to table: 650 mm # Spindle taper: ISO 7388 (with internal cooling), Tool holder: Size 40 # Spindle speed range (standard): 100/14,000 rpm, Max. torque: 63.7/89.4 Nm at 330 rpm Automatic tool changer: # Number of tools: 20 # Tool selection system: sequential/random # Max. tool diameter (adjacent): 85 mm, Max. tool diameter (non-adjacent): 135 mm # Max. tool length: 300 mm # Max. tool weight: 6.5 kg # Tool change time: 6 seconds (standard), 3 seconds (fast) Electrical connection: # Voltage: 3x400V/50Hz Bwsdpfsxw Tqzex An Ujr # Installed power: approx. 30 kVA Dimensions: # Floor space required: approx. L 2.1 x W 3.5 x H 3 m # Weight: approx. 4,200 kg Equipment included: # CNC Control: GE Fanuc Series 31i MODEL A # Chip conveyor # Lubrication system # Emulsion paper filtration system: Filber S.L. Model FTH5/10 – 200 l/min # Electrical cabinet cooling system # Spindle cooling system: HARBOR Model HBO-750PTSB2 # Documentation: Electronic and hard copy available Machine status: IN OPERATION

Condition: repair required (used), Year of construction: 2009, functionality: not functional, machine/vehicle number: 281-09, Technical Characteristics: # Machining Workspace: X 550 mm; Y 400 mm; Z 360 mm # Axis Description: 3 linear axes (X, Y, Z) + rotary table axis A and 2 rotary axes B, equipped with an index divider head with direct angular measuring system, max. rotation speed 50 min⁻¹, accuracy +/- 5" # Axis A swivel: +/-110˚ # Max. clamping/part dimensions: Ø 247 x 830 mm; max. weight 360 kg # Rapid traverse: X/Y/Z 40/40/40 m/min # Distance between divider heads B1/B2: 250 mm # Spindle speed: 1-10,000 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 1x48 tools / chip-to-chip time approx. 2.5 sec # Max. tool diameter: Ø 82 mm / max. length 250 mm / max. weight 5 kg Electrical Connection: # Voltage: 3x400V/50Hz # Total installed power: approx. 45 kVA / 80A Dimensions: # Installation footprint: approx. 4.4 x 2.3 x 3.1 m # Weight: approx. 8,500 kg Equipment Includes: # CNC control: Siemens 840D Power Line # Chip extractor: Spring Knoll # Oil cooling system Bwjdpfx Anoxwmvko Ujr # High-pressure oil filtration system, up to 80 Bar: Knoll HL 450/1200 # Cooling system for spindle, linear guides, and control cabinet # 2 independent oil lubrication systems # Oil vapor extraction/recovery system: LTA AC3002 # Fire suppression system: Kraft & Bauer # Part presence detection: with low-pressure air sensors # In-process measurement: Marposs T25 # Tool breakage detection: Blum Novotech # Tool holder detection system in spindle # Documentation: incomplete Machine Condition: NOT OPERATIONAL # Hydraulic oil leakage at Peiseler rotary table # New hydraulic pump available in stock

Condition: used, Year of construction: 2003, X-axis: 1 660 mm Y-axis: 510 mm Z-axis: 510 mm Control system: Mazatrol 640M Fast feed: 30 000 mm/min Feed rate: 8 000 mm/min Speed range: 40 - 12 000 rpm Table : 2 000 x 510 mm Number of T-slots: 5 T-slot size (ISO R299): 18 mm T-slot distance: 100 mm Max. table load: 1 000 kg Spindle distance to table: 180 - 690 mm Bwodpfx Anoy Nlv No Uor Spindle center to stand: 530 mm Table height: 750 mm X-axis: 1 660 mm Y-axis: 510 mm Z-axis: 510 mm Control system: Mazatrol 640M Fast feeding: 30 000 mm/min Feeding: 8 000 mm/min Number of T-slots: 5 T-slot size (ISO R299): 18 mm T-slot spacing: 100 mm Max. board load: 1 000 kg Distance from spindle to table: 180 - 690 mm Spindle distance to table: 180 - 690 mm Fast feed: 30 000 mm/min Spindle center to stand: 530 mm Feed rate: 8 000 mm/min T-slot distance: 100 mm Max. table load: 1 000 kg Table height: 750 mm

Condition: used, Year of construction: 2017, Machine type Vertical CNC turning center Manufacturer EMAG GmbH & Co. KG Model VL 4 Year of manufacture 2017 Control system Fanuc 32i-B CNC Number of axes 3 (X, Z, Y-Axis) Tool turret 12 stations, including fixed and driven holders (BMT65) Max. chuck diameter 260 mm (10.2 inches) Max. workpiece diameter 200 mm (7.9 inches) Max. workpiece length 200 mm (7.9 inches) X-axis 740 mm (29.1 inches) Z-axis 400 mm (15.7 inches) Y-axis ±30 mm (±1.18 inches) Rapid traverse X-axis 60 m/min Rapid traverse Y-axis 15 m/min Rapid traverse Z-axis 30 m/min Bwedoyyazbopfx An Uer Power (40% cycle) 25 kW (33.5 hp) Power (100% cycle) 18 kW (24 hp) Torque (40% duty cycle) 280 Nm Torque (100% duty cycle) 202 Nm Max. speed 4,500 rpm Machine weight Approx 10,000 kg Machine dimensions (L × W) Approx 6,000 mm × 3,600 mm

Condition: excellent (used), DOOSAN VC 630/5AX YEAR 2015 CNC HEIDENHAIN 530 AXIS TRAVEL: -X: 650 mm -Y: 765 mm -Z: 520 mm -A: 150 (+30 -120º) – (0.001º) -C: 360º (0.001º) TABLE: -5 Continuous axes -⌀ 630 mm Bjdpfszc Hm Uex An Uewr -Distance from spindle to table: 210-730 mm -Max. permissible weight: 500 kg RAPID TRAVERSE: -X: 40 m/min -Y: 40 m/min -Z: 36 m/min -A: 20º/min -C: 30º/min BALL SCREWS: ⌀ 45 X 16 (X, Y), ⌀ 45 X 12 (Z) mm ELECTRIC SPINDLE HEAD ISO 40 DIN69871 (*Brand new) -Motor power (continuous - 30 min): 24/32 Kw -RPM: 20,000 INCLUDED OPTIONS: -Optical scales on all axes -120-tool changer -Automatic pallet changer with 5 pallets -Renishaw measuring probe -Laser pre-measuring device -Chip extractor CONDITION: Machine in excellent condition. Headstock is completely new. Available for inspection in operation.