Used Chiron Fz 16 for sale (110)

Year of construction: 1985, condition: used, Drilling capacity in ST 60 20mm Tapping capacity M16 Milling capacity in ST 60 up to 20 cm³/min Milling capacity in AL up to 80 cm³/min. Tool holder SK30 Spindle motor - direct current 5.7 kW Speed range/max. torque i 1:1 20 to 6000 rpm with 40 NM Step change 1.12 Spindle bearing diameter 50mm Tool clamping mechanical Pull-in force 3000 N feed of the Z-axis 200mm rapid traverse speed of the Z-axis 15m/min feed force of the Z-axis 6000 N feed path of the X- and Y-axis 500 x 250mm clamping surface 630 x 400 mm rapid traverse rate of the X- and Y- axis 15 m / min feed force of the X- and Y- axis 6000 N Programmable feed rate in all three axes 1 to 4000 mm/min Projection spindle to guide 300 mm Distance spindle support to table surface 190 to 390 mm (stroke 200mm) and 190 to 615 mm (stroke 400mm) Number of magazine positions (tools) 12 Tool shank steep taper shank 30 max. tool diameter at full occupancy 63mm max. tool diameter with free secondary places 100mm max. permissible tool weight 5 kg tool change time approx. 1 sec. Cut to cut time approx. 3.2 sec. Total connected load approx. 15 kW (but only needs approx. 5~10 kW in operation) Machine weight approx. 3,5 to. Requires commercial compressed air connection Hfjdpfob Hf I Tox Aftsn

Year of construction: 1985, condition: used, Technical manuals and tool holders available; further technical data: Drilling capacity in ST 60 20mm Threading capacity M16 milling capacity in ST 60 up to 20 cm³/min Milling capacity in AL up to 80 cm³/min. Tool holder SK30 Spindle motor - direct current 5,7 kW Speed range/max. torque i 1:1 20 to 6000 rpm with 40 NM Hfedpfx Afsbwn Rhoton step jump 1,12 spindle bearing diameter 50mm Tool clamping mechanical Pull-in force 3000 N feed of the Z-axis 200mm rapid traverse speed of the Z-axis 15m/min feed force of the Z-axis 6000 N feed path of the X- and Y-axis 500 x 250mm clamping surface 630 x 400 mm rapid traverse rate of the X- and Y-axis 15 m / min Feed force of the X- and Y- axis 6000 N Programmable feed in all three axes 1 to 4000 mm/min Spindle overhang to guide 300 mm Distance between spindle and table surface 190 to 390 mm (stroke 200mm) and 190 to 615 mm (stroke 400mm) Number of magazine positions (tools) 12 Tool shank steep taper shank 30 max. tool diameter with full occupancy 63mm max. tool diameter with free secondary places 100mm max. permissible tool weight 5 kg tool change time approx. 1 sec. cut to cut time approx. 3,2 sec. total connected load approx. 15 kW (but needs only approx. 5~10 kW in operation) Machine weight approx. 3,5 to. needs commercial compressed air connection distance measuring systems = glass measuring scales spindle conveyor with ejection height 850 mm; make: KNOLL type: 240 S-1/150; incl. documents Shifting table for

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, Machine operating hours 11,400 Total spindle hours 1,600 New white spindle with approx. 120 hours Chiron FZ 12 KS high speed plus / 5 axes Year of manufacture 2009 Control: Siemens 840 D Travel X/Y/Z: 550/400/360 mm 2-axis NC swiveling rotary table A axis +130° / -110° C axis rotary axis 360° 48-position tool magazine HSK 50 interface Hfodpfx Afew Nip Eotsn ICS 40 bar Chip conveyor High-pressure coolant internal / external Spindle speed up to 24,000 rpm Tool measurement: Blum Novotest 3D probe: Renishaw

Condition: excellent (used), Year of construction: 2015, Various Chiron spare parts Some as new or overhauled Hjdpfx Afjwr Ua Ajtofn

Condition: good (used), Year of construction: 2012, travel distance X-axis: 550 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 360 mm, controller manufacturer: SIEMENS, controller model: 840 D, table length: 820 mm, overall weight: 7,700 kg, spindle speed (max.): 24,000 rpm, CONTROLS .. CNC controls SIEMENS 840 D WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 4 .. X-axis travel: 550 mm .. Y-axis travel: 320 mm .. Z-axis travel: 360 mm TABLE .. table surface (left-right): 820 mm .. workpiece load (max): 500 kg SPINDLE / HEAD .. spindle revolutions (max): 24000 /min .. tool fixture: HSK A50 AXIS DRIVES .. rapid traverse: 75000 mm/min TOOL MAGAZINE .. number of positions: 24 AUTOMATIC WORKLOAD EQUIPMENT .. number of store positions: 2 ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. total weight approx.: 7700 kg ATTACHMENTS .. guideway covers: yes .. central lubrication system: yes .. chip conveyor: yes .. coolant unit: yes .. closed cabin: yes .. European CE standards: yes - Shuttle table machine - Knoll (KSS) watertank FKA/350 (2011) - Highspeed plus package - - Renishaw probe, with a Chiron Lasercontrol System F1000 and with a workpiece support control - Peisseler AWU 160P rotary table - Loading and unloading robot, Fanuc LR 200iC (6-axis robot and palletizer) - Air extraction with filter Hfsdpfjxn Ipgex Aftsn Renishaw-Messtaster, mit einem Chiron Lasercontrol System F1000

Year of construction: 2010, condition: excellent (used), Chiron FZ 08 KS MAG High Speed Plus Machining Center 1. TECHNICAL DATA Drilling capacity in steel: ⌀ 12 mm thread: M8 Milling capacity in steel: 30 cm3/min tool stations: 24 Spindle nose: HSK-A 40 Max. tool diameter: 47 mm / 100 mm Max. Tool length: 160 mm Max. Tool weight: 1.2 kg Chip to chip change time: 2.1 s Speed, main spindle: 30`000 rpm Max. Torque: 11 Nm Spindle power: 9 kW Off-bar package Hfsdpfxoiy D Tmo Aften Speed: 8000 rpm Max. torque: 14,3 Nm Bar passage: 32 mm Bar feed, stroke: 460 mm X-axis: 450 mm Y-axis: 270 mm Z-axis: 310 mm Max. feed force / X and Y axis: 2000 N Max. feed force / Z-axis: 3000 N Rapid traverse (X,Y and Z axis): 75 m/min NC swivel head, swivel range: -20° / +115° rapid traverse, B-axis: 60 rpm Floor space requirement: 2.3 m2 Weight: approx. 4000 kg For the correctness, completeness and topicality of the data we do not take over guarantee.

Condition: ready for operation (used), Year of construction: 2004, General Data Machine weight 7000 kg Main Drive Number of axis 3 This 3-axis CHIRON FZ 18 L was manufactured in 2004. A robust vertical machining center with a weight of 7000 kg, it operates on a 400 V working voltage and a power capacity of 30 kVA. Ideal for those seeking reliable and efficient machining capabilities. Contact us for more information about this machine. Application Types Milling Hfsdpfoxnd Npox Aften

Condition: excellent (used), Year of construction: 2004, operating hours: 47,000 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, For sale is a vertical CNC machining center FZ 15K S five axis high speed including chip conveyor and filter system. The machining center is in excellent condition and can be viewed on site. Hfodpfovxgx Ssx Aften

Condition: excellent (used), Year of construction: 2017, SIEMENS 840D SL control Working travels 550 x 320 x 420 mm Milling head swivellling +100 / -10 ° Spindle taper HSK A50 Hfjdpfx Afewwundoton Spindle speeds -12'000 rpm Tool changer with 64 Pos. Turning spindle 4'500 rpm NC swivel rotary table with B- + C-axis Tool breakage control system Tool lenght measuring device 3D-measuring tracer Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2004, CNC control Sinumerik 840D 2-axes swivel rotary table (A- and C-axis) Hodpfx Asp E Eq Isftsfn 48-fold automatic tool changer coolant through spindle device (IKZ) chip conveyor coolant device Technische Daten / technical details: Verfahrweg X / X-Travel 550 mm Verfahrweg Y / Y-Travel 400 mm Verfahrweg Z / Z-Travel 360 mm C-Achse / C-axis 360 ° A-Achse / A-axis +-100 ° Rundtischdurchmesser / rotary table diameter 280 mm Werkzeugschaft / spindle taper HSK A63 Drehzahl / spindle speed 20-12000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 48 fach Antriebsleistung Spindel 100/60%ED / drive capacity spindle 100/60%ED 12/28 kW Gewicht der Maschine ca. / weight 8700 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, torque: 90 Nm, controller manufacturer: Siemens, controller model: 840D PL, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 25 bar, number of spindles: 1, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are Chiron experts. The machine is currently being partially overhauled and is in very good condition. If a probe or another option is needed, we can gladly provide it for an additional charge. Hedpfx Aowpcfuoftofn FZ15W with 4th and 5th axis Machine dimensions: approx. 4200mm x 2400mm Travel range -X = 730mm -Y = 400mm -Z = 425mm Control: 840D Powerline Main spindle: -Speed: 12,000 rpm -Tool holder: SK40 -Torque: max. 90NM Tool changer -Tool places: 20 Workpiece changer -Peiseler table with Afrocontroller Chip conveyor Coolant system with internal and external cooling Hydraulic clamping device Complete documentation available Geometry tip-top HS runout 0.008mm QC20 measurement 12.6µm (Manufacturer's tolerance 18µm, new machine 23µm, used machine) The machine can be inspected under power.

Condition: good (used), Year of construction: 2000, Chiron FZ 12 W pendulum table Hsdomp T Niopfx Aftjfn Year of manufacture: 2000 Control: Siemens Sinumerik 840 D travel: X 550 / Y 300 / Z 425 spindle speed: 11000 / min spindle mounting: SK 30 Power: 10 kVA weight: 4000 kg Condition: Used, ready for operation, without rifle power

Condition: ready for operation (used), Year of construction: 1995, Control Unit Brand SIEMENS Model Sinumerik 810D Main Drive Spindle speed range 10000 rpm Spindle motor power 95 kW Number of axis 2 Hfjdpsxlvccjfx Aftjn Movement X-Axis Movement 550 mm Y-Axis Movement 300 mm This CHIRON FZ 12 W was manufactured in 1995. A vertical machining center featuring a SK30 spindle mount, maximum spindle speed of 10,000 rpm, and a tool magazine with 12 positions. It includes a Sinumerik 810D control system and rapid traverse rates up to 40 m/min. Table size measures 660 x 350 mm. Consider the opportunity to buy this CHIRON FZ 12 W vertical machining center. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2005, operating hours: 9,100 h, functionality: fully functional, machine/vehicle number: 414-38, TECHNICAL DATA Travels  ; X / Y / Z 450 / 270 / 310 mm. Acceleration ; X / Y / Z 0,7 / 0,7 / 1,0 g Fast speeds ; X / Y / Z 40 / 40 / 60 m/min Spindle speeds max. 15’000 min-1 Tool connection HSK A 40 Milling cap. in St 60 max 60 cm3/min Drilling cap. In St 60 max dia. 16 mm Threading up to M12 Magazine / tool posts 24 – special on this one 40 Hfjdpfx Ajkx Ek Toftjn Tool changing time abt. 0,8 sec. Time clamp-to-clamp abt. 2,2 sec. 5 axes execution NC Table tilting rotating +/- 100° Circular plates 100 mm « Rasterbohrbild » M6 x 50 mm Rotations 4th. axis 40 min-1 Rotations 5th. axis 60 min-1 Direct measuring system for 4th. And 5th. axis +/-20’’ / +/-20’’ Distance spindle nose – table surface 170 – 450 mm Max transportable weight 6 kg errors and omissions excepted-data given without obligation

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: Siemens, controller model: 840 D SL, Spindle Speed : 15.000 rpm Power : 40 kW Tool holder : HSK-A 63 Tool changer : 32 stations Working area Traverse path X : 550 mm Travel Y : 400 mm Hfsdpfx Ajtpm R Ieftsn Travel Z : 400 mm B-axis Swivel angle : +/- 120 Swivel axis resolution : 0.0001° Repeat accuracy : +/- 5'' Speed : 50 rpm C-axis Faceplate : 280 mm Repeatability : +/- 5'' Speed : 200 rpm Drive : Torque motor general Tool change time : 0.9 sec Rapid traverse (X/Y/Z) : 75 m/min Axis acceleration (Y/Y/Z) : 1.0 - 1.5 - 2.0 g Equipment Coolant supply : Internal cooling 30 bar Coolant cleaning : Compact paper belt filter KF 150 Oil mist extraction : Extraction unit with air cleaner Workpiece measurement : Blum measuring probe Tool measurement : Renishaw Software : Kinematics Fit

Condition: good (used), Year of construction: 1999, CNC vertical machining center CHIRON type FZ 22 L Machining center with CNC control SIEMENS 840-D Series Traversing distance X: 2600 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool-to-tool change speed 2.0 sec. Hfjdpfx Afelp Rl Ajten Distance spindle - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Machine weight approx. 7.5 tons

Condition: good (used), Year of construction: 2009, For sale: Chiron FZ 08W Magnum High Speed, a high-speed vertical CNC machining center, manufactured in 2009 and equipped with a Siemens 840D control. The machine is located in Armilla, Spain, and is in perfect working condition, ideal for precision machining and series production. Main Features: Brand / Model: Chiron FZ 08W Magnum High Speed Year of Manufacture: 2009 CNC Control: Siemens 840D (PCU 50 / NCU 572.5, 6 axes, 1 channel) Travel Distances: X-axis: 450 mm Y-axis: 270 mm Z-axis: 310 mm Spindle Speed: Up to 15,000 rpm Tool Holder: HSK-A 40 DIN 69893 Spindle Power: 7.2 kW (25% duty cycle) / 2.2 kW (100% duty cycle) Tool Magazine: 24 positions with automatic tool changer Tool Change Time (chip-to-chip): ~1.9 s Cooling System: Internal high-pressure cooling (up to 150 bar) High-pressure pump with dual-switchable 60 µm filter Coolant Filtration System: Automatic continuous paper filter (50 µm) 500-liter coolant tank Chip Conveyor: Chain conveyor with 100-liter chip container Automatic Loading Doors Table Size: 2x660x350 mm Maximum Table Load: 100 kg per side Rapid Traverse Speed: Up to 75 m/min (X, Y, Z) Axis Acceleration: X-axis: 1 g Y-axis: 1.5 g Z-axis: 2 g Additional Features: High-speed package (increased acceleration and faster tool changes) 0/180° Work Area Switching System with intermediate partition 3D Touch Probe Renishaw TS 27R Three-color signal light on the splash guard 230V power socket on the control panel Connection for portable handwheel ("Mini Handwheel") Integrated electrical cabinet cooling Additional Spare Parts Included: This machine comes with a spare parts package from another disassembled Chiron FZ 08W, making maintenance and repairs easier. The package includes: Complete Peiseler 180° table Complete tool changer system with motor Spindle head (without motor) Operator panel keyboards Doors Various electrical components Power supply for servo amplifiers 2 servo amplifiers Chip conveyor 2 spare motors Condition & Delivery: Machine is fully operational and ready for production. Available for testing at our facility. Regular maintenance performed. Video of the machine in operation available upon request. Location & Shipping: Location: Armilla, Spain Shipping and commissioning can be arranged upon agreement. For more information, contact us via phone or email. We are available to answer any questions and provide additional technical details. Hfedpfxjv R Hlij Aftjn

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA Hodpfxjquhbgs Aftofn - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: ready for operation (used), Year of construction: 2014, operating hours: 24,209 h, Control Unit Brand FANUC Main Drive Spindle speed range 12000 Spindle motor power 7.5-15 kW Number of axis 4 Movement Hfsdpfexgi Uzox Afton X-Axis Movement 730 mm X-Axis Rapid Traverse 75 m/min Y-Axis Movement 400 mm Y-Axis Rapid Traverse 75 m/min Z-Axis Movement 360 mm Z-Axis Rapid Traverse 75 m/min This 4-axis CHIRON FZ 15 W Magnum HS vertical machining center was manufactured in 2014. Ideal for precision machining, it offers robust construction and reliability. Consider the opportunity to buy this CHIRON FZ 15 W Magnum HS vertical machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2011, X-axis: 300mm, Y-axis: 250mm, Z-axis: 250mm, rapid traverse (X/Y/Z): 40/40/60m/min, chip-to-chip time: 1.5s, clamping surface dimensions: 2x 550x300mm, max. spindle speed: 15,000/min, torque: 23Nm, tool holder: HSK-A32, number of tools: 12, tool changer: CHIRON basket changer, control: GE Fanuc Series oi-MC. An on-site inspection is possible. Hjdpfx Afjw T Su Sjtsfn

Condition: ready for operation (used), Year of construction: 2012, operating hours: 29,801 h, Control Unit Brand Fanuc Model Series 31i Hsdsxgkarjpfx Aftofn Main Drive Spindle speed range 12000 1/min Number of axis 4 Movement X-Axis Movement 729 Y-Axis Movement 401 Z-Axis Movement 361 Media Power consumption 39 kVA This 4-axis CHIRON FZ 15 KWM HS vertical machining center was manufactured in 2012. If you are looking to get high-quality milling capabilities, consider the CHIRON FZ 15 KWM HS machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2002, Control Unit Hfjdjxfw Dzepfx Afton Brand SIEMENS Main Drive Number of axis 5 Movement X-Axis Movement 550 mm Y-Axis Movement 400 mm Z-Axis Movement 360 mm Media Chip conveyor Yes Additional Equipment Scope of delivery: Machine, chip conveyor, and coolant supply This 5-axis CHIRON FZ 15K S was manufactured in 2002. It features a Siemens Sinumerik 840 D control, 48 tool positions, and a spindle speed of 12,000 rpm. X, Y, and Z travels are 550 mm, 400 mm, and 360 mm respectively. Includes a chip conveyor and coolant supply. If you are looking to get high-quality milling capabilities consider the CHIRON FZ 15K S machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 1993, Control Unit Brand SIEMENS Model Sinumerik Hjdpfx Aexfcuxoftofn Media Chip conveyor Yes This 4-axis CHIRON FZ 18 W was manufactured in 1993. It features dual 4th axes and is equipped with a SIEMENS SINUMERIK control system, enhancing its precision and efficiency. The addition of a chip conveyor aids in maintaining a clean work environment. Consider the opportunity to buy this CHIRON FZ 18 W vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2004, operating hours: 5,000 h, Control Unit Brand SIEMENS Model Sinumerik 840D General Data Hfjdpfowx S A Iox Aften Machine weight 3600 kg Main Drive Spindle speed range 20 - 15000 Spindle motor power 2.2 kW Tool taper HSK-A 40 Number of axis 3 Movement X-Axis Movement 450 mm X-Axis Rapid Traverse 40 m/min Y-Axis Movement 270 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 310 mm Z-Axis Rapid Traverse 60 m/min Tools Number of station 24 Max weight 160 mm Max tool diameter 50 mm Max tool length 160 mm Additional Equipment Options: Optionally expandable to 4th and 5th axis (e.g. rotary table or swivel axis) This 3-axis CHIRON FZ 08K W vertical machining center was manufactured in 2004. It features a Siemens 840D control, a rapid traverse speed of up to 60 m/min, and a high-pressure coolant system up to 150 bar. With approximately 5,000 machine hours and a robust tool changer with 24 positions, consider the opportunity to buy this CHIRON FZ 08K W vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2012, Main Drive Spindle speed range 12000 Tool taper HSK-A 50 Number of axis 3 Max payload Up to 5 kg Movement X-Axis Movement 550 mm X-Axis Rapid Traverse 40 m/min Y-Axis Movement 320 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 360 mm Z-Axis Rapid Traverse 60 m/min Table Hjdpfx Aexaqiasftsfn Table load 500 kg Tools Max weight 5 kg The system consists of: 2 x CHIRON FZ 12 KW (2012) + 2 x Fanuc LR Mate 200iC (2011) + 2 x Fanuc M - 20iA (2011) + Waschstraße. It features a high-speed spindle with a maximum speed of 12,000 rpm and a rapid traverse speed of up to 60 m/min on the Z-axis. Each machine includes a 24-slot automatic tool changer and can handle a table load of up to 500 kg. Ideal for precision machining tasks. Contact us for more information about this machine. Application Types Milling