Used Chiron Fz 22 for sale (85)

Condition: ready for operation (used), Year of construction: 1997, operating hours: 40,000 h, functionality: fully functional, machine/vehicle number: 179-49, travel distance X-axis: 2,000 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Fanuc OMC, total height: 3,040 mm, total length: 3,920 mm, total width: 2,400 mm, table width: 550 mm, table length: 2,700 mm, overall weight: 7,200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,500 rpm, coolant supply: 30 bar, number of slots in tool magazine: 40, tool length: 250 mm, tool diameter: 75 mm, input voltage: 400 V, FZ 22 long-bed, fully functional and still in daily operation. The machine is being replaced and can be inspected at any time during regular opening hours. Cedpfxjy R D Due Ackerc

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Codpfequhbgex Acksrc Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 630 mm, Equipment: chip conveyor, Long-bed pendulum machining Control: 3-axis CNC path control, Siemens 840 D (E305-1) TECHNICAL DATA Working area X-axis 2600 mm Credpsxwwc Ujfx Ackoc Y-axis 520 mm Z-axis 630 mm Pendulum operation 2 x 860 mm Table clamping surface 3440 x 570 mm Automatic tool changer Number of tools 40 Tool holder (DIN 69871) SK 40 Tool change time 2.0 sec Max. drive power 18.5 kW Speed range up to 10,500 rpm EQUIPMENT/ACCESSORIES - Automatic tool changer ATC 40 - Long part machining/pendulum machining (center partition not included) - Splash guard enclosure with sliding doors, electrically secured, incl. machine light - Coolant unit with high-pressure pump and paper band filter Tank capacity 500 l, normal pump 200 l/min at 1.5 bar High-pressure pump 50 l/min at 20 bar, incl. double switch filter - Through-spindle coolant supply (IKZ) - Chip conveyor with ejection height 1050 mm - Rinsing gun - 1 NC rotary table with chuck - 1 hydraulic tailstock - 1 clamping bridge - Electronic handwheel - Mounting elements - Documentation

Year of construction: 1988, condition: ready for operation (used), Verfahrweg X/Y/Z: ca. 1600mm/400mm/425mm, Tischdimensionen X/Y: 1500mm/400mm, Werkzeugaufnahme: SK40, Werkzeugplätze: 20, Spindeldrehzahl: 5000U/min, Maschinendimensionen X/Y/Z: ca. 4000mm/2500mm/2900mm, Gewicht: ca. 7000kg, Steuerung: Siemens Sinumerik System 3, Betriebsstunden: ca. 19855h. Inklusive ca. 12 Werkzeughalter. Documentation available. Eine Besichtigung vor Ort ist möglich. Crjdpfx Acewaa Inekjc

Condition: ready for operation (used), Travel X/Y/Z: 650mm/400mm/425mm, table dimensions X/Y: 545mm/540mm, max. table load: 500kg, speed: 10000rpm, tool stations: 20, rapid traverse: 30m/min, feed rate: 20m/min. Machine dimensions X/Y/Z: approx. 3400mm/2100mm/2800mm, weight: approx. 5500kg. On-site inspection is possible. Crjdpfxeycwrbe Ackec

Condition: used, Year of construction: 1989, operating hours: 12,142 h, functionality: limited functionality, Equipment: chip conveyor, documentation/manual, For sale: 1989 Chiron FZ22 W machining center with dual pallet system. The machine operates accurately. Occasionally, there is a tool change error— the tool is not properly positioned into the spindle. Compatible with SK40 tool holder. Fitted with Sinumerik 810 control. Comes with chip conveyor and Knoll AE 1058.009 water treatment system; all machine manuals are included. Can be demonstrated under power upon request, currently not in production. Loading assistance is not available. Cedpfx Aoymbdijckjrc

Condition: ready for operation (used), Year of construction: 2012, operating hours: 29,801 h, travel distance X-axis: 729 mm, travel distance Y-axis: 401 mm, travel distance Z-axis: 361 mm, controller manufacturer: FANUC, controller model: Series 31i, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis CHIRON FZ 15 KWM HS vertical machining center was manufactured in 2012. If you are looking to get high-quality milling capabilities, consider the CHIRON FZ 15 KWM HS machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Availability: available from 1/7/25 • Operating voltage: 400 v • Control voltage: 230/23 v • Material processed in the machine: aluminum • Cone type : hsk-63 • 48 tool stations Crodpfxox D Nmlj Ackec • Tool holder: HSK63 Extra Information Machine still under power

Condition: used, Technical details: x-travel: ca.1000 mm y-travel: 400 mm z-travel: 420 mm control: Siemens Sinumerik 805/810 thread cutting up to max.: M 22 bore capacity in St 60 - full boring: 25 mm milling area: Leistung in St 60:150 mm sawing stroke: ca. 55mm mm range of revolutions per minute - continous: 20-6000 U/min Number of working hours: manual 26180 h tool turret: 12 Plätze/places tool taper: SK 40 total power requirement: 18 kVA weight of the machine ca.: 5,0 t machine dimensions LxWxH: 2,9x2,5x2,8 m transport measurements machine: 2,4x2,6x2,75 m Equipment: - special equipment/device ( modulating clamping system) for milling jobs of profile materials with an automatic longtitudinal cutting to length device for workpieces via circular saw module. (without functionality) - hotrizontal tool clamping ( force fitted) with vise clamping system and parallel ledges.(momentarily approx. 80mm) - tool changer type Chiron - basket tool changer - tool clamping mechanically locked, infeed force 5000N Cedeu Idnmepfx Acksrc - swarf conveyor make Knoll - loading and unloading system FMB LM RP 3000 The machine is not fuctional. On sale as is for a small budget i.D. *

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 183-89, CNC Vertical Machining Center Make: CHIRON Group Model: CHIRON FZ 12 W Year of manufacture: 1999 Machine No.: 183-89 Typical technical specifications of the CHIRON FZ 12 W: Machine type: Control system: usually Siemens 840D or Heidenhain X-axis travel: approx. 550 mm Y-axis travel: approx. 300 mm Z-axis travel: approx. 425 mm Table size: approx. 660 × 350 mm Table load capacity: approx. 500 kg Spindle speed: depending on version, 10,000 – 20,000 rpm Tool holder: SK40 or HSK-A63 Tool changer: 12–24 positions Rapid traverse: up to 60 m/min Main spindle power: approx. 10–15 kW Coolant system Central lubrication Fully enclosed safety cabin Machine weight: approx. 4,500–5,500 kg Codpjy Sr Ikjfx Ackorc The machine is part of CHIRON's well-known FZ series and is especially suited for high-speed aluminum and steel machining.

Condition: good (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, rapid traverse X-axis: 75 m/min, Axis travel: X = 730 mm Y = 400 mm Z = 360 mm Rapid traverse rate: 75 m/min Cedpfxoy U Hp Io Ackerc Maximum spindle speed: 12,000 rpm (15 kW motor) Tool change time: 2.5 s (chip-to-chip) Serial number: 139-26 (2009) The machine is in good condition. Loading is included in the price. Key technical parameters are listed below. Siemens control system. The machine has 2 pallets.

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, controller manufacturer: FANUC, controller model: Series 21i-M, spindle speed (max.): 18,000 rpm, number of axes: 3, This 3-axis CHIRON FZ 08 W was manufactured in 2001. It features a maximum spindle speed of 18,000 rpm and a robust tool interface with HSK-A40. The machine includes integrated pallet changer for efficient workpiece handling. If you are looking to get high-quality machining capabilities, consider the CHIRON FZ 08 W vertical machining centre we have for sale. Contact us for further details regarding this machine. Credpsy Ex H Hofx Ackjc • Condition: Machine is no longer functional and can only be used as a supplier of spare partsElectrical data • Kind of current: 3/N/PE ~ 50/60 Hz • Working voltage: 400 V • Control voltage: 230/24 V • Rating: 12 kVA • Rated current: 17 A • Fuse: 20 ASpindle • Spindle type: Water-cooled motor spindle • Max. torque: approx. 15 NmOther machine details • Workpiece changing system: Integrated pallet changer (W-type) • Maintenance intervals noted: 8h, 50h, 200h, 500h, 2000h, 6000h • Lubrication requirements: INSK K11 / ALKANIA 2 (Shell)

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 464-61, controller manufacturer: Siemens, controller model: Sinumerik, workpiece length (max.): 300 mm, workpiece diameter (max.): 200 mm, total height: 2,400 mm, total length: 3,200 mm, total width: 2,000 mm, overall weight: 22,000 kg, spindle nose: HSK-A32, number of slots in tool magazine: 12, mount diameter: 32 mm, tool length: 160 mm, tool diameter: 63 mm, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained machine from training workshop and demonstration. Fully functional and immediately ready for use. Equipped with NC indexing device, manufacturer: PEISELER, type: AWUP 100. Includes comprehensive machine documentation as well as 2 spare filters. Credpfxey Sghls Ackjc

Condition: repair required (used), Year of construction: 1991, operating hours: 40,000 h, functionality: limited functionality, machine/vehicle number: 109-43, travel distance X-axis: 550 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 425 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, feed rate X-axis: 4,000 m/min, feed rate Y-axis: 4,000 m/min, feed rate Z-axis: 4,000 m/min, nominal power (apparent): 13 kVA, torque: 35 Nm, controller manufacturer: Fanuc OMB, controller model: 9030556, workpiece length (max.): 220 mm, workpiece diameter (max.): 65 mm, total height: 2,600 mm, total length: 2,800 mm, total width: 1,800 mm, table width: 370 mm, table height: 900 mm, table length: 950 mm, table load: 500 kg, overall weight: 2,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, distance table center to spindle nose: 615 mm, number of slots in tool magazine: 12, input voltage: 380 V, Equipment: chip conveyor, rotational speed infinitely variable, Chiron Fz 12 S, year of manufacture 1991. Additional indexing device. Currently with a measurement system error on the B-axis. The machine can be inspected at any time during regular opening hours. Crsdsy R Dqhjpfx Ackoc

Condition: excellent (used), Year of construction: 2002, CHIRON FZ 15S with 4 axis in Perfect Condition Machine can be inspected any time under power Codsrgqu Hopfx Ackorc

Condition: good (used), Year of construction: 2013, If some parts shown by hand, that parts not come with machine. Cedpfxjy Awxps Ackjrc Technical data shown on picture.

Condition: defective spare-parts repository (used), functionality: not functional, controller manufacturer: Siemens, table width: 470 mm, table length: 990 mm, overall weight: 5,500 kg, spindle speed (max.): 10,500 rpm, No reserve price – guaranteed sale to the highest bidder! Note: The machine is defective. The control system does not power up, so it requires repair or can be used as a source of spare parts. Otherwise, the machine is in good mechanical condition. TECHNICAL DETAILS Spindle speed: 10,500 rpm Table length: 990 mm Table width: 470 mm Crodsy Ni Agopfx Ackjc MACHINE DETAILS Control manufacturer: Siemens Machine weight: 5,500 kg

Condition: ready for operation (used), Year of construction: 1999, Chiron FZ 12 W High Speed Year: 1999 Control: Siemens Sinumerik Type: Vertical machining center with pallet changer Axes travel X axis: approx. 550 mm Y axis: approx. 300 mm Z axis: approx. 425 mm Spindle Spindle taper: SK40 Spindle speed: approx. 10,000 to 10,500 rpm Spindle motor power: approx. 9 to 15 kW Crjdpfx Acoy E Ihgjkoc Tool system Tool changer capacity: approx. 12 to 20 positions Max tool weight: approx. 4 kg Tool holder: SK40 Table Table size: approx. 660 x 350 mm Max workpiece weight: approx. 150 kg Table type: pallet changer system Electrical data Voltage: 400 V or 230 V Frequency: 50 to 60 Hz Power consumption: approx. 11 kVA Current: approx. 15 A Machine dimensions and weight Weight: approx. 4000 kg Length: approx. 3000 to 3500 mm Width: approx. 2500 to 3000 mm Height: approx. 2500 to 3000 mm Coolant system Manufacturer: Knoll Type: 340 K 1 600 Year: 1999

Condition: good (used), CHIRON FZ 08 KS Magnum is a 5‑axis machining center engineered for precision, high accuracy and reliable production. Travels X450×Y270×Z310 mm; drilling 12 mm; tapping M8. Tool magazine 24 pos., tool Ø max 47 mm (100 mm free), length 160 mm, tool wt 1.2 kg. Spindle HSK‑A40 0–36000 rpm; spindle motor 7 kW; rapid 75 m/min; 3×400V 50Hz; air 6 bar; installed power 14 kW (19 kVA); machine ≈3400 kg; dims 2308×1405×2447 mm. Features: tool‑break control, RS232, switch‑cabinet air‑con, status light. Delivers tight tolerances for automotive, aerospace, medical, watchmaking. Crjdjyxn Hcopfx Ackoc

Condition: excellent (used), Year of construction: 2020, Unique opportunity to purchase this high quality CHIRON 5-axis machining center for profiles. Built and first use in 2020. The spindle was replaced in June 2022 and currently has 4500 operation hours. Machine is in very good condition and it can be inspected under power upon appointment. Availability: on request Including: Chip conveyor (scraper type) Profile bar feeder for bar lengths up to 6 m, for guiding profiles up to Ø 212 mm Coolant system TPF 350 / FKA 900 Coolant through the spindle Fixed 3D probe Type TS 27 R – RENISHAW Renishaw RLP40Q probe system Cnc control SIEMENS 840D X-axis 730 mm Y-axis 400 mm Z-axis 425 mm Maximum spindle speed 15,000 rpm Maximum torque 140 Nm Drilling capacity Ø 42 mm Csdjyt I Uhspfx Ackjrc Thread tapping M30 Tool magazine capacity 20 tools Tool taper DIN 69893 HSK A63 Maximum tool diameter 65 mm Milling capacity 500 cm³/min in E355 steel Full technincal specifications in the attached document. Optional: ARMIN automatic robot cell (2024)

Condition: good (used), Year of construction: 2006, Spindle 12000 TR:MN Crodpfxon D D Nhj Ackjc CN SIEMENS SINUMERIK 258-38. Number of hours on the counter: 85 642 hours total machine power 30 KVA stroke X 300 mm, stroke Y 400 mm, stroke Z 425 mm spindle speed 12000 rpm travel speed 60m/min tool attachment SA40 2 UNITS AVAILABLE

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 191-89, Technical characteristics: - Machining workspace: X 550 mm; Y 400 mm; Z 360 mm - Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis A and 2 rotary divider head axes B, equipped with direct angular measuring system, max rotation speed 50 rpm, accuracy +/- 5" - Axis A swivel range: +/- 110° - Max. clamping/part dimensions: Ø 247 x 830 mm; max. weight 360 kg - Rapid traverse rate: X/Y/Z 40/40/40 m/min - Distance between divider heads B1/B2: 250 mm - Spindle speed: 1–10,000 rpm - Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) - Automatic tool changer: 1x48 positions / chip-to-chip average 2.5 sec - Max. tool diameter: 82 mm / max. tool length: 250 mm / max. tool weight: 5 kg Electrical specifications: - Supply voltage: 3x400V/50Hz - Installed power: approx. 45 kVA / 80A Dimensions: - Installation space: approx. 4.4 x 2.3 x 3.1 m - Weight: approx. 8,500 kg Equipment includes: - CNC control: Siemens 840D Power Line - Chip conveyor: Spring Knoll - Oil cooling system - High-pressure oil filtration system (max. 80 bar): Knoll HL 450/1200 Credpfxexxi Rmj Ackec - Shaft cooling system, guideways and control cabinet - 2 oil lubrication units - Oil mist extraction/recovery: LTA - Fire protection: Kraft & Bauer - Part presence P/Y detection: with low-pressure air sensors - In-process inspection: Marposs T25 - Tool holder presence detection in spindle - Documentation: incomplete Machine status: NOT OPERATIONAL: Hydraulic power unit motor burned out.

Condition: repair required (used), Year of construction: 2009, functionality: not functional, machine/vehicle number: 281-06, Technical Specifications: # Machining Workspace: X 550 mm; Y 400 mm; Z 360 mm # Axis Description: 3 linear axes (X, Y, Z) + 1 rotary axis (rotary table A) and 2 rotary axes (B, indexer head) with direct angular measuring system, maximum 50 rpm, accuracy +/- 5 seconds # A axis swivel: +/-110˚ # Max. clamping/part dimensions: Ø 247 x 830 mm; max. weight 360 kg # Rapid traverse rate: X/Y/Z 40/40/40 m/min # Distance between divider heads B1/B2: 250 mm # Spindle speed: 1–10,000 rpm Credpfjxxivcsx Ackjc # Spindle taper: DIN69893-HSK-A63 (with internal coolant) # Automatic tool changer: 1x48 tools / chip-to-chip time approx. 2.5 sec # Max tool diameter: Ø82 mm / max. length 250 mm / 5 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 45 kVA / 80A Dimensions: # Installation area: approx. 4.4 x 2.3 x 3.1 m # Weight: approx. 8,500 kg Equipment includes: # CNC control: Siemens 840D Powerline # Chip conveyor: Spring Knoll # Oil cooling system # High-pressure oil filtration system, max. 80 bar: Knoll HL 450/1200 # Shaft, guideways, and electrical cabinet cooling system # 2 oil lubrication systems # Oil mist extraction/recovery: LTA AC3002 # Fire protection: Kraft & Bauer # Presence detection: with low pressure air sensors (part present) # In-process control: Marposs T25 # Tool breakage monitoring: Blum Novotech # Tool presence detection system in spindle # Documentation: incomplete Machine condition: NOT OPERATIONAL # Cover for tool magazine # Tool magazine presence sensor (BERU)

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 191-88, Technical specifications: # Working area: X 550 mm; Y 400 mm; Z 360 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis A and 2 rotary axes B with indexing head, direct angular measuring system, max. speed 50 rpm, accuracy +/- 5" # A-axis swivel: +/-110˚ # Max. clamping/part size: Ø247 x 830 mm; max. weight 360 kg # Rapid traverse rate: X/Y/Z 40/40/40 m/min # Distance between dividing heads B1/B2: 250 mm # Spindle speed: 1-10,000 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 1x48 tools, tool-to-tool average 2.5 sec # Max. tool diameter: Ø82 mm / max. tool length: 250 mm / max. tool weight: 5 kg Crodpfexw Uplsx Acksc Electrical system: # Voltage: 3x400V/50Hz # Installed power: approx. 45 kVA / 80A Dimensions: # Installation footprint: approx. 4.4 x 2.3 x 3.1 m # Weight: approx. 8,500 kg Equipment includes: # CNC control: Siemens 840D Power Line # Chip conveyor: Spring Knoll # Oil cooling unit # Oil filtration system up to 80 bar: Knoll HL 450/1200 # Shaft, linear guide and electrical cabinet cooling system # 2 oil lubrication systems # Oil mist extraction/recovery unit: LTA AC3002 # Fire suppression: Kraft & Bauer # Part presence check with low-pressure air sensors # In-process control: Marposs T25 # Tool support monitoring system at spindle # Documentation: incomplete Machine condition: NOT OPERATIONAL # Operator protection screen damaged – operator panel functional # Tool magazine chain # Ballbar X # Ballbar Y # Pullbar spindle # Axis drive power supply X # Axis drive power supply Y # Main drive power supply # Complete hydraulic unit defective

Condition: repair required (used), Year of construction: 2009, functionality: not functional, machine/vehicle number: 281-09, Technical Characteristics: Crjdpfx Acjxwmvkeksc # Machining Workspace: X 550 mm; Y 400 mm; Z 360 mm # Axis Description: 3 linear axes (X, Y, Z) + rotary table axis A and 2 rotary axes B, equipped with an index divider head with direct angular measuring system, max. rotation speed 50 min⁻¹, accuracy +/- 5" # Axis A swivel: +/-110˚ # Max. clamping/part dimensions: Ø 247 x 830 mm; max. weight 360 kg # Rapid traverse: X/Y/Z 40/40/40 m/min # Distance between divider heads B1/B2: 250 mm # Spindle speed: 1-10,000 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 1x48 tools / chip-to-chip time approx. 2.5 sec # Max. tool diameter: Ø 82 mm / max. length 250 mm / max. weight 5 kg Electrical Connection: # Voltage: 3x400V/50Hz # Total installed power: approx. 45 kVA / 80A Dimensions: # Installation footprint: approx. 4.4 x 2.3 x 3.1 m # Weight: approx. 8,500 kg Equipment Includes: # CNC control: Siemens 840D Power Line # Chip extractor: Spring Knoll # Oil cooling system # High-pressure oil filtration system, up to 80 Bar: Knoll HL 450/1200 # Cooling system for spindle, linear guides, and control cabinet # 2 independent oil lubrication systems # Oil vapor extraction/recovery system: LTA AC3002 # Fire suppression system: Kraft & Bauer # Part presence detection: with low-pressure air sensors # In-process measurement: Marposs T25 # Tool breakage detection: Blum Novotech # Tool holder detection system in spindle # Documentation: incomplete Machine Condition: NOT OPERATIONAL # Hydraulic oil leakage at Peiseler rotary table # New hydraulic pump available in stock

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,500 h, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 15,000 rpm, number of axes: 3, This 5-axis CHIRON FZ 08K S Magnum SK was manufactured in 2007. It features a Siemens 840D control unit, with impressive travels of 450 mm in the X-axis, 270 mm in the Y-axis, and 310 mm in the Z-axis. The machine includes a 40-position tool changer and a high-pressure coolant system. If you are looking to get high-quality machining capabilities, consider the CHIRON FZ 08K S Magnum SK vertical machining centre we have for sale. Contact us for further details. Crodpfx Acsypb Tpoksc • Overhaul: Factory overhauled and technically updated by Chiron (CMS) in 2017 • Last Spindle Replacement: September 2025 • Last Maintenance: Major annual service (4,000 h) performed in October 2025 • NC Swivel Head Range: −20° / +115° • Rapid Feed X/Y/Z: 75 m/min • Acceleration X/Y/Z: 1g / 1.5g / 2g • Tool Changer: 40 positions, HSK-A40 • Chip-to-Chip Time: 2.6 s (vertical) • Rotary Table: AWU 160 with D105 mm positioning axis • Operating Hours: Approximately 22,500 h Additional equipment • Clamping: Hainbuch Spanntop D100 collet chuck • Bar Loader: IRCO SiMag 100.1-3000 for round and profile material • High Pressure Coolant: 70 bar with Vario valve • Coolant Filtration: Knoll VRF, 400-liter vacuum rotation filter • Chip Conveyor: Scraper belt, 1,050 mm discharge height • Measurement/Monitoring: Renishaw TS27R 3D touch probe; tool life monitoring; tool breakage control • Collision Monitoring: Brankamp Marposs CMS 100 • Guide Channel Sets: Breuning IRCO sets included (by arrangement) • Collets: Hainbuch collets included (by arrangement) • Tool Holders: Approximately 500 pieces HSK-A40 • Spare Parts: Included for this machine type • Operating Materials: Specific operating fluids/materials included