Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,050 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 6,000 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis Mazak VCN 510C was manufactured in 2003. It features a spindle speed of 12,000 rpm with an SK40 taper and a tool magazine with 30 positions. The table size is approximately 1300 × 550 mm, and it includes a cooling system with 15 bar internal pressure. Consider the opportunity to buy this Mazak VCN 510C vertical machining centre. Contact us for more information. Gtjdpfxjx Enlro Ab Tsw • Tool magazine: 30 positions • Control: Fusion • Table size: approx. 1300 × 550 mm • Cooling: 15 bar internal (through-spindle) pressure Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,500 h, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: WINMAX, total height: 3,240 mm, table load: 2,000 kg, overall weight: 7,950 kg, spindle speed (max.): 12,000 rpm, tool weight: 7,000 g, number of axes: 3, This 3-axis Hurco VMX50i was manufactured in 2021. It features a robust SK40 spindle, capable of reaching speeds up to 12,000 rpm, and a large table surface of 1500 x 660 mm supporting up to 2000 kg. With X/Y/Z travels of 1270/660/610 mm and rapid traverse rates of 32/32/24 m/min, it's ideal for dynamic machining tasks. Includes a 30/40 position automatic tool changer. Contact us for more information about this machine. • Spindle face to table: 101–711 mm • Table working surface (W x D): 1500 x 660 mm • Table T-slots (DIN 650): 6 x 18 x 100 • Automatic tool changer (ATC) positions: 30/40 • Machine status: Powered and in operation • Total machine hours: 6700 Additional equipment • Chip conveyor • Mist collector • External emulsion tank with filtration for internal tool cooling • Including workpiece and tool probes • Programming extensions dwg-dxf Dimensions Godpox D E Acofx Ab Tjtw Machine Depth 5059 mm

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 550 mm, controller manufacturer: FANUC, controller model: 0i-MD, table width: 1,200 mm, table length: 600 mm, table load: 600 kg, overall weight: 7,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 24, tool weight: 7,000 g, number of axes: 4, This Dugard 1000Y Plus was manufactured in 2011. It features a table size of 1200 × 600 mm, a maximum table load of 600 kg, and a tool magazine capacity of 24 tools. The machine includes a fourth rotary axis and is equipped with a FANUC 0i-MD control. If you are looking to get high quality milling capabilities consider the Dugard 1000Y Plus machine we have for sale. A large set of accessories and equipment is included. Contact us for more information. • Table size: 1200 × 600 mm • Spindle taper: ISO 40 • Through-spindle coolant system • Tool magazine capacity: 24 tools • Most common control: FANUC 0i-MD Additional equipment • Fourth rotary axis included • Tool and workpiece measuring probe Gtjdpfx Abex D Hdbs Tew • Extra coolant feeder • Air gun hose for compressed air cleaning • A set of accessories and equipment is included Technical Specification Taper Size ISO 40 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2016, operating hours: 11,898 h, travel distance X-axis: 800 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: 840 Dsl - ShopMill, overall weight: 5,450 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis DMG ecoMill 800 V was manufactured in 2016. It features a robust SK40 spindle with a speed of 12,000 rpm and a 30-station tool magazine. The machine supports a maximum workpiece weight of 800 kg and includes a built-in coolant system with a high-pressure 20 bar filter. Additional features include a swarf conveyor and Renishaw touch probe. If you are looking to get high-quality milling capabilities, consider the DMG ecoMill 800 V machine we have for sale. Contact us for more information. Gedpfxjx D H Dho Ab Tstw • Tool magazine capacity: 30 stations Additional equipment • Coolant system with filter, high-pressure 20 bar • Coolant tank capacity: 600 l • Swarf (chip) conveyor • Renishaw OTS • Renishaw touch probe

Condition: ready for operation (used), Year of construction: 2004, operating hours: 5,743 h, controller manufacturer: HEIDENHAIN, controller model: 417, This 3-axis MIKRON VCP 600 was manufactured in 2004. It features a high-performance spindle with speeds up to 20,000 rpm and a robust 30-slot tool changer. The working range is 600 x 450 x 450 mm, supporting a maximum workpiece weight of 500 kg. Ideal for precise machining of metals and alloys, it offers stable construction and efficient cooling. Consider the opportunity to buy this MIKRON VCP 600 vertical machining centre. Contact us for more information. • Maximum workpiece size: 840 x 600 x 500 mm • Maximum workpiece weight: 500 kg • Spindle operating time: 5.743 hours Gtodpfx Asx Imtyob Tew • Tool changer: 30 tools • Positioning accuracy: ±3 µm • tool clamping system HSK 63 • Key features: • Versatile applications: precise machining of a wide range of materials • High-performance spindle for fast, precise machining • Stable, robust construction for high accuracy with heavy workpieces • Automation-ready: integrated features for automated tool and workpiece changes • Efficient cooling system for optimized performance and tool life • Application: Ideal for tool and mold making and the production of high-precision components across various industries Additional equipment • m&h 3D probe • Vise: not included

Condition: ready for operation (used), Year of construction: 2004, operating hours: 22,032 h, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 910 kg, number of axes: 5, This 5-axis MIKRON HSM600U was manufactured in 2004. It features an impressive X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine is equipped with a high-speed spindle capable of reaching up to 36,000 rpm and a tool magazine with a capacity of 60 positions. If you are looking to get high-quality machining capabilities, consider the MIKRON HSM600U vertical machining centre we have for sale. It includes a pallet changer. Contact us for further details. • Tool magazine capacity: 60 positions • Coolant system: Through-spindle coolant (IKZ) • Lubrication: Minimum quantity lubrication (MQL) • Electrical: 400 V, 50/60 Hz, 4 kVA, 5.7 A (full load) • Condition note: Without tools, pallets and vises (available separately) • Program run time: 35,982 h • Spindle hours: 22,032 h Additional equipment Gedpfx Aoyly Sceb Tstw • 6-fold pallet changer • Table system: Delphin system (System 3R) Technical Specification Taper Size HSK 50

Condition: ready for operation (used), Year of construction: 2017, operating hours: 6,929 h, controller manufacturer: HEIDENHAIN, controller model: TNC 530, number of axes: 5, This 5s POSmill H 500 U was manufactured in 2017. It features a Heidenhain TNC 530 control, a 60-station tool magazine, and a KESSLER rotary table with a diameter of 500 mm. The machine includes advanced systems such as automatic coolant level monitoring and a BLUM laser tool measuring system. Consider the opportunity to buy this POSmill H 500 U vertical machining centre. Contact us for further details. • Tool magazine: 60-station, HSK-A63 • Rotary table: KESSLER rotary table, Ø 500 mm Gtjdpfeyir Dxex Ab Tow • Spindle air blast: Air through the spindle • Internal coolant supply: 20 bar, with belt filter unit • Coolant system: Automatic coolant level monitoring • Media supply: 3-channel media supply at table center • Handwheel: Mobile electronic handwheel • Tool measurement: BLUM laser tool measuring system • Workpiece measurement: Infrared workpiece probing (3D touch probe); workpiece measuring preparation included • Viewing: Rotation viewing window included • Collision monitoring: POS DCM collision monitoring module • Condition: Top condition • Hours: 6,929 • Accessories note: Without tool holders and without quick clamping system Additional equipment • Oil mist separator: Electromechanical • Hydraulic unit: Hydraulic aggregate, M-function controlled

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 635 mm, travel distance Y-axis: 365 mm, travel distance Z-axis: 345 mm, total height: 2,200 mm, table load: 1,000 kg, overall weight: 3,500 kg, spindle speed (max.): 40,000 rpm, number of axes: 3, This 3-axis OPS INGERSOLL OPS 600 was manufactured in 2001. It features a work spindle speed range of 5000-40000 and a tool magazine with 12 positions. The machine includes an extraction system for oil mist or dust and a Teka filter system. Ideal for high precision milling, consider the opportunity to buy this OPS INGERSOLL OPS 600 vertical machining centre. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Max distance from work spindle to clamping table: 470 mm • Work table clamping area: 630 x 500 mm • Tool holder: hsk-e 32 • Tool magazine: 12 tool positions • With media distributor • The machine is completely enclosed Gsdpfxeym Ap Tj Ab Totw • Extraction system included for oil mist or dust • Manuals and operating instructions are available Extra Information Machine still under power Dimensions Machine Depth 2200 mm

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 750 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 530 mm, controller manufacturer: FANUC, controller model: Oi MF5, total height: 2,850 mm, total width: 2,600 mm, table width: 420 mm, table length: 750 mm, table load: 400 kg, overall weight: 5,000 kg, spindle speed (max.): 11,000 rpm, spindle motor power: 11,000 W, product length (max.): 2,400 mm, number of axes: 4, This 4-axis Z-YANG V7L was manufactured in 2021. It features an X-axis travel of 750 mm, Y-axis travel of 430 mm, and Z-axis travel of 530 mm. The machine is equipped with a FANUC Oi MF5 control system, a powerful 11 kW spindle motor, and an automatic tool changer with 24 tools. If you are looking to get high-quality metalworking capabilities, consider the Z-YANG V7L vertical machining centre we have for sale. Contact us for further details. • Automatic Tool Changer: 24 tools • Rapid Traverse: 48 m/min • Feed Rate: up to 15 m/min Additional equipment Gtsdpfx Aoyrfcgob Tew • Chip conveyor (included) Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 640 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 828, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis KNUTH XMILL 640 was manufactured in 2015. It features a Siemens 828 control, a spindle speed of 8,000 rpm, and a BT40 spindle taper. The table size is 750 × 360 mm, and it includes an 18-tool changer. If you are looking to get high-quality milling capabilities, consider the KNUTH XMILL 640 machine we have for sale. Contact us for more information. • Rotary axes: No • Tool changer: 18 tools • Table size: 750 × 360 mm Gtedpfx Ajyct Aveb Tew • Optical scales: No • Other options: 20 bar through-spindle coolant Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,100 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 600 mm, table load: 1,100 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 11,000 W, number of axes: 3, This 3-axis Wele AA1165 was manufactured in 2014. A vertical CNC machining center featuring a Fanuc 0i-MC control, it offers X/Y/Z travels of 1,100 mm, 650 mm, and 600 mm respectively. Rapid feeds reach up to 24 m/min, with a spindle speed of 15,000 rpm. The table supports loads up to 1,100 Kg. Consider the opportunity to buy this Wele AA1165 vertical machining center. Contact us for more information about this machine. • Status: Excellent • Rapid feed (X/Y/Z): 24 / 24 / 20 m/min • Distance table–spindle nose: 125–725 mm • Table size: 1,300 x 650 mm • Tool turret: 24 positions • Notes: Spindle recently replaced Gsdpfxeygmd Us Ab Tjtw Additional equipment • Chip evacuator (chip conveyor) Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 850 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: Sinumerik, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis Dugard 850VMC was manufactured in 2007. It features a maximum spindle speed of 8,000 rpm and an impressive X/Y/Z travel of 850 x 520 x 510 mm. The machine includes a robust table size of 1000 x 510 mm. If you are looking to get high-quality machining capabilities, consider the Dugard 850VMC vertical machining centre we have for sale. Contact us for further details. • Table size: 1,000 x 510 mm • Control system: Siemens Sinumerik • Condition/operation: Single-shift operation; fully functional; under power • Recent maintenance: Replaced X-bolt, nut, and bearings; replaced X and Y axis cover plates Gtedpfxsylphts Ab Tjw

Condition: ready for operation (used), Year of construction: 2000, operating hours: 5,374 h, travel distance X-axis: 610 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 540 mm, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis Hurco BMC 2416 vertical machining center was manufactured in 2000. It features a robust Ultimax control system, a spindle speed of up to 8000 rpm, and rapid traverse rates reaching 24003 mm/min. With a tool magazine of 24 positions and generous travels in X, Y, and Z dimensions (610, 406, 540 mm respectively), consider the opportunity to buy this Hurco BMC 2416 vertical machining center. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Gjdpfx Aex D Nz Njb Tjtw • Max rapid traverse: 24003 mm/min • Max contour feed: 7620 mm/min • Tool positions: 24 Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2002, controller manufacturer: HEIDENHAIN, number of axes: 5, This 5-axis DECKEL MAHO DMU 50 eVolution was manufactured in 2002. Ideal for complex machining tasks, this vertical machining center ensures precision and versatility in a compact footprint. Consider the opportunity to buy this DECKEL MAHO DMU 50 eVolution vertical machining center. Contact us for more information. Machine Benefits Technical Machine Benefits • This summary includes only the relevant information as per the provided details and instructions. Extra Information Gtsdeyaimxopfx Ab Tow Machine still under power

Condition: ready for operation (used), Year of construction: 2001, controller manufacturer: HEIDENHAIN, controller model: TNC 426/430M, This 4-axis DECKEL MAHO DMU 60 T was manufactured in 2001. It features a Heidenhain TNC 426/430M control, a working area of 630x530x630 mm, and a spindle speed of 12,000 rpm. The swivel B axis can rotate 180 degrees, and it includes two tool magazines with 12 positions each. Consider the opportunity to buy this DECKEL MAHO DMU 60 T vertical machining centre. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Milling time: 29633 hours/ machine on time: 79606 hours • Swivel b axis: 180 degrees • Two tool magazines with 12 positions each / laser tool measurement for length and diameter "blum" • Spindle speed: 12000 rpm • Working area dimensions: 630x530x630 mm Gjdpoyaqdxsfx Ab Tjtw

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 5, This 5-axis HAAS UMC-750SS vertical machining center was manufactured in 2021. Consider the opportunity to buy this HAAS UMC-750SS vertical machining center. Contact us for more information. Additional equipment • Coolant tank – 208 liters with mobile cart • Programmable coolant pump (M-code controlled) // Programmable Coolant Nozzle (P-COOL) • Safe Run – crash and overload detection system • Control cabinet surge protection • Voltage fault detection module (EPFDM) • Second Home Position button Gedpfx Asx U Tizsb Tstw • Remote Jog Handle with 2m cable (RJH-XL) • Memory lock key-switch • Rotary axis scales • Top cover Machine Benefits Technical Machine Benefits • 30+1 tool side-mount tool changer • Wireless intuitive probing system (wips) • Broken tool detection (btd) Extra Information Media display via M130 (images, videos, PDF on screen) Standard machine memory: 1 GB Control Unit 15" color LCD monitor with USB port Touchscreen control interface Ethernet interface HaasConnect remote monitoring HaasDrop wireless file transfer WiFi connectivity Controller High-speed machining (HSM) Rigid tapping Dynamic Work Offsets / Tool Center Point Control (DWO/TCPC) Macro programming, coordinate rotation & scaling

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,346 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, number of axes: 3, This 3-axis DOOSAN NX 6500 II was manufactured in 2019. It features a Heidenhain TNC 640 control, a table size of 1200 mm by 650 mm, and travels of 1050 mm in X, 650 mm in Y, and 650 mm in Z. The spindle reaches up to 20,000 rpm, and the tool magazine holds 30 positions. If you are looking to get high-quality milling capabilities consider the DOOSAN NX 6500 II machine we have for sale. Contact us for more information. • Table Length: 1200 mm • Table Width: 650 mm • Maximum Spindle Speed: 20000 rpm • Spindle: EPM spindle made in Germany • Spindle Taper: ISO 40 dual contact • Tool Magazine Capacity: 30 positions • X, Y, Z Axis Scales • Linear Guideways (LM guide) • MPG Handwheel • Operation and Maintenance Manuals Included Gedox Uq Hdopfx Ab Tetw

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, number of axes: 3, This 3-axis DECKEL MAHO DMU 200T was manufactured in 2001. It features a Heidenhain TNC 426 control, a spindle speed of 5000 rpm, and movement lengths of X: 1800 mm, Y: 2000 mm, Z: 1100 mm. It also includes an HSK-E32 tool holder with 60 slots. If you are looking to get high quality milling capabilities consider the DECKEL MAHO DMU 200T machine we have for sale. Contact us for more information. Extra Information Gsdpfoyair Ijx Ab Tjtw Machine still under power

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 3,425 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 18,000 rpm, number of axes: 3, This 4-axis MECAL MC 305 vertical machining center was manufactured in 2008. It features a high-power electric spindle, air-cooled, with a maximum speed of 18,000 RPM and an ISO30 tool holder. The machine offers a large working range up to 8000 mm and includes a centralized minimal cooling system. If you are looking to get high-quality milling capabilities, consider the MECAL MC 305 machine we have for sale. Contact us for more information. • A (rotation): ±125° • Spindle: • Type: Electric spindle, air-cooled • Tool magazine: Gtjdpfxex D Izhe Ab Tew • Location: Center of machine base, protected area • Capacity: Various tools (milling cutters, taps, end mills, angle grinders) • Construction: • Electrowelded structure for maximum rigidity • Linear guides with ball screws • Automatic central lubrication of guides and spindles • Cooling: • Centralized minimum quantity lubrication system • Working range: • Standard workpiece length: up to 4000 mm • Extended (differential cycle): up to 8000 mm

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 3,425 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 18,000 rpm, number of axes: 4, This 4-axis MECAL MC 305 vertical machining centre was manufactured in 2004. It features a powerful 5.5 kW electric spindle, air-cooled, with a maximum speed of 18,000 RPM and an ISO30 tool holder. The tool magazine is centrally located, protected, and supports various tools. It has a standard workpiece length up to 4000 mm and an extended range up to 8000 mm. Contact us for more information about this machine. • A (rotation): ±125° Gjdpfx Abox D I Hke Tetw • Spindle Type: Electric, air-cooled • Tool magazine: • Located in the middle of the machine base in a protected area • Accommodates various tools: milling cutters, taps, end mills, angle heads • Construction: • Welded steel structure for maximum rigidity • Linear guides with ball screws • Automatic central lubrication of guides and screws • Cooling: Centralized minimum lubrication system (MQL) • Working range: • Standard workpiece length: up to 4000 mm • Extended range (differential cycle): up to 8000 mm

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,737 h, travel distance X-axis: 760 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 300 mm, controller manufacturer: RÖDERS, controller model: RMS 6 V3.6, number of axes: 3, This 3-axis Roders RFM 760 vertical machining centre was manufactured in 2005. It features a spindle speed range of 3,000 to 42,000 rpm and travel paths of 760 mm in X, 550 mm in Y, and 300 mm in Z. Equipped with Röders RMS 6 V3.6 control, it offers precise machining capabilities. If you are looking to get high-quality milling capabilities, consider the Roders RFM 760 machine we have for sale. Contact us for further details regarding this machine. Godpfx Asx D Rgmob Tstw Machine Benefits Technical Machine Benefits • Machine hours: 60737 hours since 2016 Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,145 mm, travel distance Y-axis: 615 mm, travel distance Z-axis: 615 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis Pinnacle LV116 vertical machining center was manufactured in 2008. It offers robust and precise machining capabilities, ideal for a variety of applications. If you are looking to get high-quality milling capabilities, consider the Pinnacle LV116 machine we have for sale. Contact us for more information. Godpfxex D Rpus Ab Tstw OPTIONAL: Vices and toolsAdditional equipment • Equipment: Automatic tool changer, coolant system with internal cooling

Condition: ready for operation (used), Year of construction: 2001, operating hours: 14,336 h, controller manufacturer: HAAS, controller model: n/a, total height: 1,473 mm, table load: 1,350 kg, number of axes: 3, This 3-axis HAAS VCE 550 was manufactured in 2001. It features a work spindle with a maximum speed of 7500 rpm, expandable to 10,000 rpm with an optional dual drive. The working area includes dimensions of 508 x 406 x 508 mm, and the table can support up to 1350 kg. Consider the opportunity to buy this HAAS VCE 550 vertical machining centre. Contact us for more information about this machine. • Clamping surface: 660 x 356 mm • T-slot width: 14 mm • T-slot spacing: 125 mm • Tool change operations: 321250 timesMachine still under power Additional equipment • Note: 4th axis is available but defective; power unit for AC servo motor for HRT160 must be replaced. Gtedpjx D Eg Uefx Ab Tjw Dimensions Machine Depth 2357 mm Technical Specification Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 1,260 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: FANUC, controller model: 18M, total height: 3,214 mm, total width: 2,980 mm, table load: 1,200 kg, overall weight: 12,000 kg, spindle speed (max.): 4,000 rpm, spindle motor power: 18,500 W, product length (max.): 3,480 mm, number of axes: 3, This 3-axis DAEWOO ACE V 600 was manufactured in 1997. It features an impressive X-axis travel of 1,260 mm, Y-axis travel of 650 mm, and Z-axis travel of 560 mm. The machine includes a robust table size of 1,400 x 700 mm and a maximum table load of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the DAEWOO ACE V 600 vertical machining centre we have for sale. Contact us for further details. • Spindle taper: BT50 / ISO 50 • Tool magazine capacity: 40 tools (header mentions 30 tools) Gtjdpfsyq Exljx Ab Tjw • Spindle nose to table distance: 200–770 mm • Maximum workpiece height: 610 mm • Table size: 1,400 × 700 mm • Rapid traverse rate: 20 m/min • Distance from spindle center to column: 680 mm

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 1,100 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 550 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 16,000 kg, number of axes: 3, This 3-axis TRIMILL Speed 1110 was manufactured in 2005. It features X/Y/Z travels of 1100x1000x550 mm and a tool changer with 10 positions. Weighing 16000 kg, this vertical machining centre represents a robust option for precise milling operations. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Tool changer: 10 positions • High pressure cooling 40bar • Heidenhain ts460 workpiece probe + se660 receiver. Extra Information Gsdpsx D I I Ujfx Ab Totw Machine still under power