Condition: ready for operation (used), Year of construction: 1998, operating hours: 22,465 h, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, spindle speed (max.): 16,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis HERMLE C 600 V was manufactured in 1998. It features an X-axis travel of 600 mm, Y-axis travel of 450 mm, and Z-axis travel of 450 mm. The machine is equipped with a tool magazine that holds 30 slots and an internal coolant supply of 10 bar. If you are looking to get high-quality machining capabilities, consider the HERMLE C 600 V vertical machining centre we have for sale. Contact us for further details. • Tool magazine: 30 slots Fsdpfxoy Ndu Rs Akvjgb • Internal coolant supply (IKZ): 10 bar • Operating hours: • Control on: 88,852 h • Machine on: 79,968 h • Program run: 26,348 h Additional equipment • Chip conveyor • Spindle air blast • Handheld control unit • Cooling system: KNOLL EKA/700 (YOM 1998)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 31,460 h, travel distance X-axis: 935 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 HSCI, table load: 1,500 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 85 monoBLOCK was manufactured in 2013. It features an impressive X-axis travel of 935 mm, Y-axis travel of 850 mm, and Z-axis travel of 650 mm. The machine includes a robust table size of 1,040 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 85 monoBLOCK vertical machining centre we have for sale. Contact us for further details. • Max feedrate: 40,000 mm/min • Table size: Ø 1,040 mm • Through-spindle coolant: 20 bar • Operating mode 4: machining process control (work with open work area door allowed) • Repairs/maintenance: • C-axis seal replaced just after warranty (improved version) • Spindle replaced (05/2021) • Machine measured last year – circular interpolation (Ballbar) within tolerance • Typical use: • Duralumin machining 80% overall • 3-axis: 50% • 5-axis: 40% (up to 10% 5-axis continuous) Additional equipment • Measuring probe: TS649 • Tool probe: Blum Laser • 3D quickSET • Electric handwheel • Rinsing gun • Chip conveyor Technical Specification Fgedpeyt Rdrofx Akvob Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,500 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 660 mm, controller manufacturer: OKUMA, controller model: OSP-P300M, table load: 1,500 kg, overall weight: 9,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 30,000 W, number of slots in tool magazine: 32, number of axes: 3, This 3-axis Okuma MB-66VA was manufactured in 2016. It features an X-axis travel of 1500 mm, Y-axis travel of 660 mm, and Z-axis travel of 660 mm. The machine is equipped with a powerful 30 kW spindle, capable of reaching speeds up to 15,000 rpm, and has a tool magazine with 32 positions. If you are looking to get high-quality machining capabilities, consider the Okuma MB-66VA vertical machining centre we have for sale. Contact us for further details. Fgjdjy Ndp Iopfx Akveb • Table size: 1500 × 660 mm Technical Specification Taper Size BT 50

Condition: ready for operation (used), Year of construction: 1993, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 750 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 355, spindle speed (max.): 1,800 rpm, spindle motor power: 20,000 W, number of axes: 5, This 5-axis SHW UF-5 vertical machining centre was manufactured in 1993. It features a table longitudinal travel of 1500 mm, spindle head vertical travel of 1000 mm, and a spindle head longitudinal travel of 750 mm. The machine includes a rotary table with a diameter of 1400 mm and a maximum table load of approximately 4000 kp. If you are looking to get high-quality machining capabilities, consider the SHW UF-5 machine we have for sale. Contact us for further details. • Quill in milling head: 115 mm • Feed drives and feeds: • Individual drives (X, Y, Z) • Infinitely variable feeds (X, Y, Z): 2–8000 mm/min • Rapid traverse (X, Y, Z): 8000 mm/min • Milling spindle drive: • DC motor drive power: 20 kW • Speed range (infinitely variable): 36–1800 rpm • Horizontal and vertical spindle • Spindle taper: ISO 50 • Horizontal spindle diameter (front bearing): 95 mm • Tool clamping force: • Horizontal spindle: 16,000 N Fedoy Ndmmopfx Akvogb • Vertical spindle: 10,000 N Additional equipment • Rotary table RT 5D: • Table plate with 7 T-slots, 1 central slot • Table diameter: Ø 1400 mm • T-slot size: 22 H7 (DIN 650) • Center bore: 160 mm • Max. rotational speed: 2.5 min⁻¹ • Max. table load: approx. 4000 kp • Table weight: approx. 2800 kg Technical Specification Taper Size ISO 50

Condition: ready for operation (used), Year of construction: 2010, operating hours: 8,510 h, travel distance X-axis: 730 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: 840D solutionline, spindle speed (max.): 18,000 rpm, spindle motor power: 15,000 W, number of axes: 5, This 5-axis DMG MORI DMU 60 monoBLOCK was manufactured in 2010. It features a working area of 730 mm x 560 mm x 560 mm and a rigid table size of 1,000 mm x 600 mm. The machine is equipped with a motor spindle capable of 18,000 rpm and includes a controlled NC swivelling milling head. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 60 monoBLOCK vertical machining centre we have for sale. Contact us for further details. • Tool clamping: Manual • Swivelling milling head: Controlled NC B-axis with hydraulic clamping • Spindle offset: 100 mm • Swivelling range: -120° / +30° (X-axis travel reduced by 100 mm) • Tool changer: Pick-up system, 24 magazine positions • Table: Rigid, 1,000 mm x 600 mm • Control: Siemens 840D solutionline • 3D path control • 3D machining, 3D tool correction • TRANSMIT lateral surface transformation (milling of cylindrical paths - TRACYL) • CompCad compressor function for high-speed machining • Operating mode 4 (manual intervention with doors open) • Probing and calibration: • 3D measuring probe • 3D quickSET toolkit for checking/correcting 5-axis kinematic accuracy • Running time: 30,106 hours (spindle: 8,510 hours) • Note: Soft key buttons on the screen sometimes fail; operation may require the machine’s mouse pad or an external keyboard. Additional equipment Fgjdoy Ndklspfx Akvsb • Chip conveyor • Optional: 125 SK40 tool holders Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 560 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak VCS 430A was manufactured in 2014. It features a maximum spindle speed of 12,000 rpm and a table size of 900 x 430 mm. The machine is equipped with a Mazatrol Smart CNC and has a tool capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the Mazak VCS 430A vertical machining centre we have for sale. Contact us for further details. Fsdpfx Ajy Ncyfokvogb • Table size: 900 x 430 mm Additional equipment • On-board tool presetter • Through-spindle coolant (refrigerant inside the spindle)

Condition: excellent (used), Year of construction: 2007, Controller Mitsubishi 64S Travel X/Y/Z 600 x 400 x 460 mm Table size 700 x 410 mm Fjdpfx Akjy N D Hgovogb Table load capacity 250 kg Spindle speed 12,000 min⁻¹ Tool magazine for 24 tools, BT 40 Internal coolant 20 bar Exhaust system Chip conveyor

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis WEMAS VZ 750 was manufactured in 2006. It features a HEIDENHAIN control unit with an iTNC 530 style interface, a T-slotted work table equipped with dual manual/hydraulic vises, and a mechanical spindle interface with coolant nozzles. If you are looking to get high-quality vertical machining capabilities, consider the WEMAS VZ 750 vertical machining centre we have for sale. Contact us for further details. • Axis movement: X/Y/Z, vertical orientation • Spindle/tool clamping: Mechanical clamping with coolant nozzles at spindle • Work table: T-slotted table • Electrical cabinet: HEIDENHAIN drive system; Siemens/Phoenix Contact modules; EPCOS filter • Machine features: Full enclosure; integrated work light; air and coolant lines Additional equipment • Workholding: Dual vises (manual/hydraulic) Fgodey Ncgxjpfx Akvsb • Tooling: Assorted BT/SK tool holders on external rack • Extraction: External extraction ducting

Condition: ready for operation (used), Year of construction: 2016, operating hours: 23,563 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP-P300M, table load: 900 kg, overall weight: 7,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 32, number of axes: 3, This 3-axis Okuma M560-V was manufactured in 2016. It features a generous X-axis travel of 1050 mm, Y-axis travel of 560 mm, and Z-axis travel of 460 mm. The machine is equipped with a powerful 22 kW spindle and a tool magazine that holds 32 tools. If you are looking to get high-quality machining capabilities, consider the Okuma M560-V vertical machining centre we have for sale. Contact us for further details. Fgodpey Nb T Dsfx Akvob • Table size: 1300 × 560 mm

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP-P200M, table load: 800 kg, overall weight: 6,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 20, number of axes: 3, This 3-axis Okuma M460R-VE vertical machining centre was manufactured in 2013. It features a robust X-axis travel of 762 mm, Y-axis travel of 460 mm, and Z-axis travel of 460 mm. The machine is equipped with a powerful 15 kW spindle that can reach speeds of up to 15,000 rpm, along with a tool magazine capacity of 20. If you are looking to get high-quality machining capabilities, consider the Okuma M460R-VE machine we have for sale. Contact us for further details. • Table size: 1000 × 460 mm Technical Specification Fjdpfx Asy Nb Nxekvegb Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2012, operating hours: 2,050 h, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, table load: 1,000 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,000 W, number of slots in tool magazine: 30, number of axes: 5, This 5-axis Hurco VMX 42SR was manufactured in 2012. It features an X/Y/Z travel of 1060 × 610 × 610 mm and a spindle power of 18 kW, providing robust performance for various machining tasks. The machine includes a tool magazine with 30 positions and a maximum load capacity of 1000 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 42SR vertical machining centre we have for sale. Contact us for further details. • Operating hours: 2,050 h Technical Specification Taper Size SK 40 Fgsdpfxey Nab Ho Akvjb

Condition: ready for operation (used), Year of construction: 2009, operating hours: 12,567 h, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, table load: 500 kg, overall weight: 4,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, number of axes: 5, This 5-axis Hurco VMX 30T was manufactured in 2009. It features an X/Y/Z travel of 762 × 508 × 610 mm and a spindle power of 11 kW, with a maximum load capacity of 500 kg. The machine is equipped with a 24-tool magazine and operates at a spindle speed of 8000 rpm. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 30T vertical machining centre we have for sale. Contact us for further details. • Operating hours: 12,567 h Technical Specification Taper Size SK 40 Fedpfsy Naacsx Akvogb

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,398 h, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, table load: 750 kg, overall weight: 4,800 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, number of axes: 5, This 5-axis Hurco VMX 30i was manufactured in 2017. It features an X/Y/Z travel of 762 × 508 × 610 mm and a spindle power of 15 kW, providing efficient machining capabilities. The machine includes a tool magazine with 24 positions and a robust table size of 1020 × 510 mm. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 30i vertical machining centre we have for sale. Contact us for further details. • Control: Hurco WinMax • Operating hours: 10,398 h Fodpfey I Uyzex Akvogb • Table size: 1020 × 510 mm Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 10394, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, nominal power (apparent): 21 kVA, controller manufacturer: YASNAC, total height: 3,000 mm, total length: 5,000 mm, total width: 2,400 mm, table width: 380 mm, table length: 750 mm, overall weight: 5,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 8,000 rpm, mount diameter: 40 mm, input voltage: 415 V, input frequency: 50 Hz, input current: 29 A, Equipment: chip conveyor, documentation/manual, MATSUURA MC 510 VGM CNC vertical machining centre - Tool holder: SK 40 - Table with three T-slots - Includes the tool holders currently in the magazine! - The machine is equipped with a tool changer, as well as a transformer and two chip conveyors Attention: The item must be collected on a binding date to be agreed between 24/08 and 27/08/2026. FCA D-61352 Bad Homburg – loaded onto truck Fedpfx Aoy I Tkrjkvjgb

Condition: used, Year of construction: 2006, Technical details: x-travel: 1.500 mm y-travel: 700 mm z-travel: 610 mm control: HEIDENHAIN iTNC 530 table-size: 1.400 x 700 mm tool taper: SK 40 Fsdpjndz Aqofx Akvsgb numbers of positions in the tool changer: 48 fach spindle turning speed - stepless: 15000 1/min rapid traverse: 36 m/min table load capacity: 700 kg spindle drive: 25 kW total power requirement: 30 kVA weight of the machine ca.: 9,1 t dimensions of the machine ca.: 3,7 x 2,65 x 2,9 m vertical machining center, 20 bar internal coolant supply with paper filter, 3D-touchprobe, chipconveyor, el. handwheel meter readings: approx. 43.600 h "machine on", approx. 20.000 h "spindle on", *

Condition: good (used), Year of construction: 1995, operating hours: 28,099 h, functionality: fully functional, machine/vehicle number: 662280, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: DECKEL MAHO, controller model: CNC 425, total height: 2,000 mm, total length: 3,000 mm, total width: 2,400 mm, table width: 480 mm, table length: 900 mm, overall weight: 2,000 kg, number of slots in tool magazine: 16, mount diameter: 40 mm, input voltage: 400 V, power: 20 kW (27.19 HP), input frequency: 50 Hz, input current: 50 A, DECKEL MAHO MH 600 B CNC Vertical Machining Center Fodpfx Aey I Tgyskvegb - Tool holder: SK 40 - Table with 7 T-slots - Including rotary table from manufacturer WALTER, type: TANIP125NEG, year of manufacture: 2010 Notice: The item must be collected on a binding date between 24.08. and 27.08.2026 at a time to be mutually agreed. FCA D-61352 Bad Homburg – loaded on truck

Condition: excellent (used), Year of construction: 2008, Vertical machining center Deckel Maho DMF 220 Linear Year of manufacture: 2008 Control: Siemens 840 D Technical specifications: CNC control: Siemens Sinumerik 840D Number of axes: 3 X-axis travel: 2,200 mm Y-axis travel: 560 mm Z-axis travel: 720 mm Max. clamping height: 600 mm Table size (LxW): 2,600 x 600 mm Max. table load: 2,200 kg Guideway type: Linear guide Max. power: 35 kW Tool holder: SK40 Tool magazine capacity: 60 Tool change time: 9.6 s The machine was in active serial production until recently and was predominantly used for machining steel and aluminum. Fgjdjy Nbbzjpfx Akvjb Equipment: ⦁ Partition wall for setup time optimization (parallel machining / setup in one cabin half) ⦁ Conveyor belt filter system for coolant processing ⦁ Automatic tool changer ⦁ Generous working area for complex components

Condition: excellent (used), Year of construction: 2016, CNC machining center WAGNER WBE 1600 R Year: 2016 Control: Siemens 840 D Technical data: X-axis travel: 1600 mm Y-axis travel: 800 mm Z-axis travel: 630 mm Table dimensions: 1900 x 700 mm Spindle speed: 8000 rpm SK 40 Videos of the machine available Fjdpfxjy Na Ugj Akvsgb

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 550 mm Z-axis travel: 500 mm Clamping surface: 1,100 mm x 500 mm Fgedpfxsy Iztuo Akvob Rapid traverse X/Y: 36 m/min Rapid traverse Z: 30 m/min Feed rate: 24,000 mm/min Spindle speed range: 12,000 rpm Number of tools in magazine: 30 pcs Tool holder: BT 40 MACHINE DETAILS Control: Fanuc 0i EQUIPMENT Chip conveyor Internal coolant supply HWACHEON Automatic Workpiece Changer Magazine capacity: 8 pallets Max. workpiece size, rectangular: 420 x 170 mm Max. workpiece size, round: 300 mm diameter

Condition: used, Year of construction: 2012, x-travel 635 mm y-travel 510 mm z-travel 460 mm table surface area 790 x 560 mm spindle taper SK 40 spindle turning speed - stepless 20 - 12.000 U/min spindle drive 13 kW max. torque on the spindle 83 Nm feeds x/y/z -stepless bis 20.000 mm/min rapid traverse 30 m/min ATC 20 Pos. tool diameter if 2 vacant positions 130 mm tool diametre at full load 80 mm tool length - max. 300 mm weight of tools max. 6 kg internal coolant system feed 12 bar Fjdpfx Akex Nqu Dsvogb control HEIDENHAIN, TNC 620 total power requirement 17 kVA weight of the machine ca. 3,9 t dimensions of machine L x W x H 3,0 x 1,92 x 2,35 m Accessories: electron. hand panel, chip conveyor,coolant

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: MAZATROL, controller model: 640M, total height: 2,823 mm, total width: 3,160 mm, table load: 1,500 kg, overall weight: 8,900 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 18,500 W, tool weight: 20,000 g, product length (max.): 3,436 mm, number of axes: 5, This 5-axis Mazak V515/40N was manufactured in 2006. It features a maximum workpiece dimension of 1,300 mm x 550 mm x 680 mm and a robust table size of 1,300 mm x 550 mm with a maximum table load of 1,500 kg. The machine offers a rapid traverse rate of 26 m/min in X/Y and 20 m/min in Z. If you are looking to get high-quality milling capabilities, consider the Mazak V515/40N vertical machining centre. Contact us for further details. • Milling capacity in S45 (JIS): 634 cm³/min • Drilling capacity in S45 (JIS): 50 mm • Table Size: 1,300 mm x 550 mm • Table Configuration: 5 T-slots, 100 mm distance, 18 mm reference groove • Table Height from Floor: 800 mm • Spindle Nose to Table: 200 mm - 760 mm • Spindle Center to Column: 525 mm • Rapid Traverse (X/Y): 26 m/min • Rapid Traverse (Z): 20 m/min • Feed Rate (X/Y/Z): 8 m/min • Min Spindle Speed: 25 rpm • Max Torque: 758 Nm • Max Tool Diameter: 125 mm (adjacent occupied) / 260 mm (adjacent free) • Max Tool Length: 400 mm • Chip-to-Chip Time: 5.5 s • Coolant Tank Capacity: 200 L • Coolant Pump Power: 0.75 kW • Connected Load (30 min/100%): 41.2 KVA / 36.2 KVA • Compressed Air Supply: 5 kg/cm², 200 L/min Additional equipment Fedpfoy I Amvox Akvjgb • Extraction System: Donaldson Torit DCE • Chip Conveyor: Mayfran

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, total height: 2,750 mm, total width: 4,600 mm, table load: 1,100 kg, overall weight: 6,500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, tool weight: 7,000 g, product length (max.): 3,800 mm, number of axes: 3, This 3-axis Hurco VMX 42 vertical machining centre was manufactured in 2004. It features a table clamping surface of 1270 x 610 mm and travels of 1060 mm in the X-axis and 610 mm in both Y and Z axes. The machine has a maximum table load of 1100 kg and a spindle speed range of 10 - 10,000 RPM. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 42 machine we have for sale. Contact us for further details. • Table clamping surface: 1270 x 610 mm • Spindle power: 7.5 kW (100% ED), 15.0 kW (30% ED) • Spindle torque: 238 Nm at 625 rpm (30% ED) • Programmable feed rate: 3.0 – 7600 mm/min • Adjustable feed rate: 3.0 – 11,400 mm/min • Rapid traverse X/Y/Z: 30 / 30 / 20 m/min • Pull stud: DIN ISO 7388/11 Type B • Max tool diameter (full/adjacent empty): 80 mm / 160 mm • Max tool length: 300 mm • Tool change time (chip-to-chip): max 14 s • Tool changer: Automatic, 24 stations • Control: Ultimax 4 with dual screens (text and graphics) • Software: Conversational and ISO-code programming • Hardware: Pentium technology, 1.6 GB hard drive, 64 MB RAM • Electrical connection: 38 kVA, 400 V, 42 A • Compressed air: 6 bar / 0.3 ccm/min • Z-axis drive malfunction Additional equipment • Coolant system • Coolant wash gun • Chip flushing system • Chip enclosure • Chip conveyor Fgsdpsy I Ad Isfx Akvob • Signal light • Machine light • Machine feet Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: MATRIX 2, table width: 550 mm, table length: 1,300 mm, table load: 1,200 kg, overall weight: 7,700 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, This 3-axis Mazak VCS 530C vertical machining center was manufactured in 2015. It features a robust Mazatrol MATRIX 2 control system, a table size of 1300x550 mm, and a maximum table load of 1200 kg. The spindle operates at speeds up to 12000 rpm with ISO 40 taper, and the machine includes a 30-position tool magazine and dual pallets. Consider the opportunity to buy this Mazak VCS 530C vertical machining center. Contact us for more information. Additional equipment • workpiece and tool probe • mist extraction • oil separator Machine Benefits Technical Machine Benefits Fedpfoy Iz Rasx Akvogb • Cooling through spindle pressure: 15 bar • Number of pallets: 2 • The machine is in very good technical condition. Extra Information Machine still under power Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 1996, operating hours: 23,198 h, controller model: Millplus V400, number of axes: 3, This 3-axis DECKEL MAHO DMU 60T was manufactured in 1996. It features a 24-position tool changer, an NC rotary table, and a spindle speed up to 6300 rpm. The working areas are 600 mm in length, 525 mm in width, and 500 mm in height. It includes a coolant system with a 150-liter capacity. Consider the opportunity to buy this DECKEL MAHO DMU 60T vertical machining centre. Contact us for more information about this machine. Control & Electrical • Control: Millplus V400 • Screen: Color, text in German/English • Operating Voltage: 400 V, 50 Hz • Control Voltage: 24 V • Drive: Digital with overload protectionSpindle & Tooling Fgjdpfsy Iwnusx Akvob • Spindle: With quill • Maximum Spindle Speed: 6,300 rpm (speed range with gearbox: 20–6,300 rpm) • Tool Holder: ISO 40 – DIN 69871 • Pull Stud: DIN 69872 Form A • Tool Changer: 24–25 tool positionsWorking Area & Movement • Longitudinal (X) Travel: 600 mm • Cross (Y) Travel: 525 mm • Vertical (Z) Travel: 500 mm • Rapid Traverse X/Y/Z: 18 m/min • Feed Rate: Up to 10,000 mm/min • NC Rotary Table: 3-axis on fixed tableCooling & Accessories • Coolant System Capacity: 150 L • Full Enclosure: Yes • Paint: Gray / Green (NCS)Documentation • 2 sets, GermanThe machine has a 4-axis C-axis (dividing head)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, table width: 280 mm, table length: 280 mm, table load: 300 kg, rotary table diameter: 280 mm, coolant supply: 80 bar, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 189, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This HERMLE C30 U is still currently in production and will be available from week 42. The machine is still in daily use for extremely high-precision machining and is also in excellent condition, having always been perfectly maintained by HERMLE NL. The complete maintenance history is available after purchase. (Viewing on site is possible by appointment) Additional options & accessories: - Extended tool magazine (ZM 157) - Pallet system RS1 (KUKA robot) including pallets and Soflex control system - NC rotary table Ø280 mm - Chip conveyor - 6-fold pass-through Fgedpoy Ib Dasfx Akveb - A-axis position eccentric - Internal coolant supply (IKZ) (40 - 80 bar) - Conveyor belt filter for IKZ - Chip trolley 450L - Blow-off device - Air blast through the spindle - Electronic heat compensation iTNC - Electronic handwheel - Renishaw probe - Oil mist extraction Weight & dimensions: C30 U: 10,000 kg, RS1: 4,000 kg, ZM175: 2,500 kg Setup dimensions: approx. 6.5 × 4.5 m, floor space: ≈ 29 m²