Used Oil Press for sale (17,335)

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 400 t, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Bjdpfsph Uk Njx Af Holk Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. (sliding table press, hydraulic press, hydraulic press, double column press)

Condition: new, Year of construction: 2022, pressing force: 15 t, Single column press with 15 T capacity suitable for continuous shift operation a) travel speed 10 mm/sec. downwards, b) opening speed up to 25 mm/sec c) starting pressing speed 10 mm/sec d) table size 400x400 mm e) ram size 200x200 mm, with T grooves and central cylinder clamping f) Overall size approx. 1150x800x1750 mm g) oil temperature display on oil tank h) pressure adjustment from 5 T to 17 T ( adjustable by rotary control ) i) Hand lever operation with two speeds j) Machine body powder-coated, or double-painted k) Control cabinet supply line from above with 3000 mm cable and 16 Ampere plug l) assembly, commissioning, instruction against separate calculation Press design Single column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Bjdsitylgopfx Af Helk Press force max. ( at 250 bar ) 150 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel to steel Max. 2 sec. Max. Opening width 400 mm Stroke and min. opening 350 mm Table height above floor 850 mm Height above floor (headroom) approx. 1900 mm Hall height min. 2.500 mm Parallel deviation at 20°C +/- 0.1 mm Determined at max. clamping force with 70% occupancy < = 0.3 mm/m Weight Total weight of the press without operating materials approx. 1.1 to Fast closing with 10 mm sec. Press speed 10 - 0 mm sec. Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 290 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Gear pump approx. 9 L/min Oil volume approx. HLP 46 MW 80 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system 400 V AC Main supply Control voltage 24 V DC Hydraulic pumps 24 V DC Frequency 50 Hz Hydraulic connection Main motor 3 kW Total connection Approx. 5 kW Equipment control cabinet Protection class IP 54 Reserve space Approx. 20 Cooling no Interior lighting no Operating mode switch Lockable yes

Condition: good (used), Code: 0283 Brand: ITALPRESSE Model: 25/13 Bodpfx Afjyazdij Hjlk Fabricated platen for diathermic oil press Technical data: Platen dimensions: mm 2500 x 1300 Max temperature up to 120° Max working pressure: 3/5 kg/cm2 Heating medium pressure 0,5 ate Composition: Aluminium - Flat gauged steel sheet - Coil of piping for fluid circulation - Reinforcement piping - Flat gauged steel sheet - Insulating material

Condition: used, Year of construction: 2006, operating hours: 14,000 h, functionality: fully functional, machine/vehicle number: 85-089, overall weight: 20,000 kg, RAPESEED OIL PRESS SYSTEM A complete and automatic rapeseed oil press installation based on a Reinartz AP15 press with a 55Kw motor driven via a DANFOSS VLT 5062 frequency controller and has a capacity of 1000 Kg rapeseed - 800 Kg sunflower seeds per hour, a crude oil stirring tank of 15,000 liters with a Wangen KL30S60.00 eccentric pump as feed to an automatic AMA filter system consisting of a plate filter with 20 m2 filter surface and 2 fine filters, one with filter bag and one with filter candles up to 0.5 micron size of the impurities. The seed supply is done via a dosing screw with the possibility of heating the seed, the real entrance to the press is protected by a permanent magnet to catch iron impurities. The discharge of the rapeseed cake is done via a chain conveyor and conveyor belt. The entire installation is controlled via a SIEMENS Simatic Multi Panel touch screen control cabinet of approximately 1m wide / 2m high. This cabinet also contains a modem to forward error messages to various GSMs. The control can work in auto mode as well as in manual mode. In addition to these most important systems, the installation also contains the necessary additional silos for filling the main silo, which enables 24/7 operation. The entire installation was built in 2006 and has produced 14,000 hours and is now completely ready for transport. Blodpfowl Afyjx Af Hok If desired, the sale of individual elements can be discussed. If further information is required, this can best be done by email and preferably in Dutch, French or English.

Condition: new, Year of construction: 2022, OMC 3000×1300 105T Hydraulic Press Working area: 3000x1300mm Opening width: 400mm 6 cylinders with a diameter of 85mm Total pressing force: 105T Maximum heating temperature: 85 degrees Celsius Logic control system Bljdpfx Afsimwp Se Hsk Machine control via a touch panel with readouts: Temperature, pressing force, platen opening time, load area calculation, process programming for gluing Power: 21KW CE certified Manufactured in 2022 Machine available on order Machine is new

Condition: good (used), mileage: 352,000 km, power: 194 kW (263.77 HP), first registration: 07/1998, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: orange, suspension: steel, total length: 7,100 mm, total width: 2,500 mm, total height: 3,350 mm, loading space volume: 8 m³, Year of construction: 1998, Equipment: differential lock, power assisted steering, = Additional options and accessories = - Leaf spring suspension - Differential lock - Air horn - Sun visor Bledpfezklw Hex Af Hok - Power take-off (PTO) - Central lubrication system = Further information = Suspension: Leaf spring suspension Front axle: Steered; Tire tread depth left: 50%; Tire tread depth right: 50% Rear axle: Dual tires; Differential lock; Tire tread depth left (inside): 30%; Tire tread depth left (outside): 30%; Tire tread depth right (inside): 30%; Tire tread depth right (outside): 30%; Reduction gear: External planetary axles Number of cylinders: 6 GVWR: 18,000 kg Technical condition: good Optical condition: good

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, INORON CLINER C 351 Bledpezq T Aqefx Af Hok Mobile washing station with oil separator and high-pressure cleaner Completely self-sufficient, no permit required, suitable for oil- and emulsion-containing tools or products. Like new condition; can be inspected on-site. For further information, please contact me.

Year of construction: 2023, condition: as good as new (ex-display), Exhibit, immediately available: new RENNER SCROLL SL-I 4.5 (10 bar) oil-free compressor with RENNERtronic Touch control with star-delta Year of construction: 2023 Operating hours: 1 hr The compressor is in stock and available immediately Pressure: 10 bars Rated power: 4.50 kW Delivery quantity: 405 l/min Sound level: 68 dB(A) Blsdpfxolnlrzo Af Hek Compressed air outlet: 1/2" Dimensions length x width x height: 760 x 550 x 920 mm Weight: 181 kg Visit our store. We always have a wide range of new and used compressors in stock! Immediately available.

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 340590, new RENNER SCROLL SL-NEO 7.5 I (8 bar) oil-free compressor Blodpfjv Al Nqsx Af Hsk Year of construction: 2025 Operating hours: 1 hr Pressure: 8 bars Rated power: 7.50 kW Delivery quantity: 890 l/min Sound level: 69 dB(A) Compressed air outlet: 1/2" Dimensions length x width x height: 835 x 595 x 935 mm Weight: 195 kg Visit our store. We always have a wide range of new and used compressors in stock! Immediately available.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 6214330001, overall weight: 89 kg, total height: 950 mm, power: 2.2 kW (2.99 HP), pressure (max.): 8 bar, noise level: 60 dB, new oil-free DENTAL piston compressor Dr Sonic 320-50-W-ES with attached double column adsorption dryer with sound insulation box and additional fan Oil-free piston compressor, two-cylinder, single-stage, max pressure 8 bar, built on 50 lt. internally coated tank with attached adsorption dryer. Blsdpjvlw Haefx Af Hjk Ideal for 3 dental chairs – minimal space requirement due to compact design. Specifications: Type : Dr. SONIC 320-50-W-ES-3M Operating overpressure max : 8 bar Suction capacity : 320 l/min Effective delivery rate at 6 bar*) : 210 l/min Number of steps : 1 Number of cylinders : 2 Compressor speed : 1400 1/min Nominal power drive motor : 2,2 Motor protection class / insulation class : IP 54 / F Operating voltage / frequency : 230 /50 V/Hz Sound pressure level (DIN 45635 T13) : 60 dB(A) Tank volume : 50 litres Width : 700 mm Depth : 500 mm Height : 980 mm Weight : 89 kg Compressed air connection : G 3/8

Condition: new, Year of construction: 2025, operating hours: 2 h, machine/vehicle number: LENTO 55WK, New Speed-controlled, oil free, water injected screw compressor ALMIG LENTO 55 LK Year of construction: 2025 technical spezifications: Type: LENTO 55 WK Possible operating pressures of the system(continuously adjustable): 5 - 12 bar Delivery rate at minimum/maximum speed, measured according to ISO 1217 Annex C: at 5 bar min/max: 1.41 / 7.79 m³/min at 6 bar min/max: 1.40 / 7.74 m³/min at 7 bar min/max: 1.39 / 7.69 m³/min at 8 bar min/max: 1.38 / 7.64 m³/min at 9 bar min/max: 1.37 / 7.59 m³/min at 10 bar min/max: 1.35 / 7.29 m³/min at 11 bar min/max: 1.34 / 6.97 m³/min at 12 bar min/max: 1.33 / 6.71 m³/min Rated power of drive motor: 55 kW Bledpjc Rt D Nefx Af Hok Protection / insulation class of drive motor: IE 3Protection / insulation class of fan motor: IP 54 / H Operating voltage / frequency at min. / max. speed: 380 / 41/200 V/Hz Residual oil content: 0 mg/m³ Cooling water requirement at 100% load( at inlet +15° / delta t = 15 K ): 55 l/min Cooling water outlet (max): 45 °C Cooling water pressure (min / max): 2 / 10 bar Cooling water quantity (min / max): 140 l/min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point of refrigerant dryer at 50% load: 3 °C 100% load: 3 °C Sound pressure level (DIN 45635 T.13) soundproofed, at 50% load: 75.6 dB(A) 100% load: 78.2 dB(A) Length: 2,300 mm Width: 1,400 mm Height: 1,580 mm Weight: 1,690 kg Compressed air connection: G 1 1/2 inch Visit our shop, we always have a large number of new and used compressors in stock.

Condition: new, Year of construction: 2026, operating hours: 1 h, New speed controlled ALMIG LENTO 15 LK screwcompressor oilfree, compressor is on stock Immediately available. Controller: Air Control HE Technical specifications Type: LENTO 15LK Possible overpressures of the compressor: (infinitely adjustable): 5 to 10 bar Delivery quantity at minimum / maximum speed: at 5 bar min/max : 1,03 to 2,64 m³/min at 6 bar min/max : 1,00 to 2,42 m³/min at 7 bar min/max : 0,97 to 2,20 m³/min at 8 bar min/max : 0,93 to 2,03 m³/min at 9 bar min/max : 0,90 to 1,82 m³/min at10 bar min/max : 0,87 to 1,63 m³/min elektric motor power: 15 kW Operating voltage / frequency: 400/50 V / Hz Blodjdtm Ndjpfx Af Hek Residual oil content: 0 mg / m³ SPL: 50% load: 66 dB (A) 100% load: 68 dB (A) Length: 1880 mm Width: 850 mm Height: 1985 mm Weight: 890 kg Compressed air connection: G 1 inch

Condition: good (used), Year of construction: 1994, machine/vehicle number: 25286, Built in 1994 Blodpfxsd R Saqj Af Hok Equipment: embossing press: • case magazine with case bending device DBA (without feeding conveyor) • foil feeder with two pairs of foil feeding rollers • electric counter • delivery conveyor to the right

Year of construction: 2023, operating hours: 0 h, condition: as good as new (ex-display), machine/vehicle number: OFASHL060-40G16AE, Parker Zander adsorption dryer Compressed air preparation system OIL FREE AIR SYSTEM. The OFAS combines sophisticated OIL-X filtration technology with one Optimized drying system to deliver consistently high performance over the long term. The air quality has been externally certified according to ISO 7183 and 8573-1 and meets the requirements of class 0 for the total oil content if required. With dew point control, regeneration air volumes adjustable Exhibit: Parker / Zander adsorption system OFASHL060-40G16AE Year 2019 Bljdod Sninjpfx Af Hek Technical data: Compressed air connection: BSPT G 1/2 " Flow rate: 1.65 m³ / min at pressure dew point -20 ° C 1.50 m³ / min at a pressure dew point of -40 ° C Removes dirt, oil and water up to 0.003 μm Max. Pressure 16 bar Dimension: Width: 559 mm Depth: 490 mm Height: 1510 mm Weight: 93 kg The OFAS system is officially certified by Lloyd to ISO 8573-1 Class 0 in terms of the total oil content of the compressed air from oil-lubricated and oil-free compressors. Other models and designs on request!

Condition: used, Heißfolienprägemaschine mit 25000kgs Druckleistung / Hot Foil Stamping machine with Pressure 25.000Kg Heißfolienprägemaschine / Hot Foil Stamping GEBA BAIER 49/25 Baujahr / Year 1972 - Serial-No. 72425 Bljdpfxszh Hawe Af Hok Druckleistung / Pressure max. 25.000Kg Prägefläche / Embossing size max. 300 x 430mm Höhenverstellung / Height adjustment ca. 190mm In einem guten Zustand / In good condition Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 1998, OVERVIEW This ABC 4HA-4-LT high-pressure reciprocating air compressor, manufactured in 1998, is designed for the supply of compressed air in PET bottle blowing applications. The compressor is manufactured by ABC – Arizaga, Bastarrica y Cía S.A. from Eibar, Spain. The machine is a 4-stage reciprocating compressor with oil-free cylinder compression design and a nominal pressure of 42 bar. It is belt-driven. The compressor is mounted on a structural steel skid and includes interstage piping, pressure monitoring, cooling water connections, main drive motor, belt-drive safety guard and integrated control cabinet. The machine is equipped with an analog pressure gauge panel showing the final stage, intermediate stages and oil pressure. The control cabinet is fitted with status lamps for temperature, water, oil, thermal relay and dryer fault indications, as well as an hour meter and emergency stop.   TECHNICAL DATA - Manufacturer: ABC – Arizaga, Bastarrica y Cía S.A. - Manufacturer Location: Eibar, Spain - Model / Type: 4HA-4-LT - Machine Type: High-pressure reciprocating air compressor - Year of Manufacture: 1998 - Application: High-pressure compressed air supply for PET bottle blowing Bedpfoziawrox Af Helk - Compression Design: Oil-free cylinder compression - Number of Compression Stages: 4 stages - Nominal Pressure: 42 bar - Regulation Air Pressure: 8 bar - Suction Pressure: Not specified - Flow Rate: approx. 546.9 m³/h - Compressor Speed: 725 rpm - Motor Power: 150 CV / 110 kW - Total Power to Install: 158 HP / 115 kW - Transmission: Belt-driven - Power Voltage: 380 V - Control Voltage: 220 V - Frequency: 50 Hz - Cylinder Diameter, 1st Stage: 250 mm - Cylinder Diameter, 2nd Stage: 160 mm - Cylinder Diameter, 3rd Stage: 105 mm - Cylinder Diameter, 4th Stage: 75 mm - Piston Stroke: 150 mm - Cooling System: Water-cooled - Cooling Water Flow Rate: approx. 6.5 m³/h - Ambient Temperature Range: 0 – 40°C - Cooling Water Temperature Range: 5 – 40°C - Compressor Weight: approx. 2,900 kg - Motor Weight: approx. 830 kg - Complete Equipment Weight: approx. 7,230 kg - Pressure Gauges Observed:Final stage: approx. 42 bar 3rd stage: approx. 16 bar 2nd stage: approx. 6 bar 1st stage: approx. 2 bar Oil pressure: approx. 3.5 bar - Control Cabinet: Integrated electrical control cabinet, marked T2/7 - Operator Elements: Status lamps, analog hour meter and emergency stop - Status Indications: Temperature, water, oil, thermal relay and dryer fault - Safety Equipment: Belt-drive / flywheel safety guard and emergency stop - Construction: Green painted multi-stage compressor on structural steel skid - Additional Equipment Observed: Interstage header pipework, vertical separator / receiver vessel and overhead piping - Certification: CE-marked - Condition: Used, installed in industrial production environment

Condition: good (used), Oil-water separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator Bljdpfxoxz Avne Af Hek -Manufacturer: Jorc, oil-water separator -Type: AIRGROUP-SEP 30 -Dimensions: 970/440/H900 mm -Weight: 56 kg

Condition: good (used), oil-water separation system, condensate separator, oil and water separator, oil separator, separator, oil/water separator, oil/water separator Bledpfsv Aip Uex Af Hjk -Manufacturer: Kaeser, oil-water separator -Type: Aquamat 4 -Dimensions: 530/480/H1000 mm -Weight: 22 kg

Condition: used, Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer:BEKO, oil-water separation system Oil and water separation device type Öwamat KT 05 -Accessories: incl. Oekosorb replacement filter, see photos -Dimensions: Ø 680 x 1130 mm Bsdetxkvropfx Af Hjlk -Weight: 73 kg with pallet

Condition: good (used), Emulsion splitting plant, oil-water separation system Bledpfob A S I Hsx Af Hjk -The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations regarding sewer discharge. -Dimensions: 750/350/H830 mm -Weight: 10 kg

Condition: used, Oil-water separation system, condensate separator, oil and water separator, oil separator -Oil-water separation system: oil and water separator -Dimensions container: Ø 500 x 755 mm Blsdpfxsfmilme Af Hjk -Dimensions: Ø 585 x 1145 mm -Weight: 31kg

Condition: used, Oil-water separation system, condensate separator, oil and water separator, oil separator, separator, oil/water separator, oil/water separator -Manufacturer: Domnick Hunter, oil-water separator -Type: SE2015 -Dimensions: 800/480/H1085 mm Bjdpfx Asig A Awsf Hslk -Weight: 82kg

Condition: good (used), Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer: Alarm clock, oil-water separation system oil and water separator type WO 2 -Dimensions container: Ø 470 x 740 mm Bedpfoq Ei Dbox Af Holk -Total dimensions: Ø 590 x 1160 mm -Weight: 27kg

Condition: used, Oil-water separation system, condensate separator, oil and water separator, oil separator Bsdefnxxdepfx Af Helk -Manufacturer: drukomat, oil-water separator -Type: drukomat 1 -Dimensions: 430/330/H680 mm -Weight: 27kg

Condition: good (used), Oil-water separation system, oil-water separator, condensate separator The cost-effective and permanently reliable solution to the problem is usually oil/water separation for dispersed condensates. The purified water meets the legal requirements for sewer discharge. Bledoctla Hepfx Af Hsk -Number: 1 filter available -Price: per piece -Dimensions: 460/500/H950 mm -Weight: 32 kg