Used Cnc Lathes for sale (11,253)

Condition: used, Year of construction: 2006, turning diameter 500 mm turning length 1300 mm control Fanuc 18i TB turning speed range - main spindle 0 - 3500 min/-1 drive capacity - main spindle 33 kW max. torque 800 Nm number of tool places 12 axial / 12 direkt Pos. tool taper VDI 40 output max. 8 kw max. torque 35 Nm turning speed range - driven tools 0 - 4000 U/min x-travel 318 mm z-travel 1360 mm y-travel -60 / +80 mm tailstock quill taper MT 4 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as subject to prior sale reserved! Dcjdpfxozawlce Acksh

Condition: good (used), Year of construction: 2019, 2019 CMZ TX-66-Y2-Quattro Twin‑Turret, Y‑Axis Lathe with FANUC 31i Model B CNC Control & Hydrafeed MSV 65 Bar Feed Dsdpfx Acjzbr Arjksch Twin Turret Configuration For Simultaneous Machining. Full 'Y'-axis Capability On Both Turrets For Complex Part Geometries. FANUC 31i Model B CNC Control For Reliable, High-Precision Control. Integrated Hydrafeed MSV 65 Bar Feed For Automated Bar Loading. High-Speed, High-Precision Spindles. Distance Between Spindles 639mm. Maximum Turning Ø255mm. Maximum Swing Over Carriage Ø270mm. Main Spindle Side (Turret 1) XL Travel 190mm. ZL Travel 500mm. YL Travel ±40mm. Sub-Spindle Side (Turret 2) XR Travel 190mm. ZR Travel 500mm. YR Travel ±40mm. Sub Spindle Travel 635mm. Rapid Traverse Rates X-Axis 16,000 mm/min, Z-Axis 20,000 mm/min, Y-Axis 12,000 mm/min, Sub Spindle 30,000mm/min. Axis Acceleration 1g. Main Spindle: Spindle Nose: ASA 8" A2. Maximum Bar Capacity Ø66mm. Spindle Bore Ø77mm. Maximum Speed 4,000rpm. Power 15kW. Torque 135 Nm. Sub-Spindle: Spindle Nose: ASA 6" A2. Maximum Bar Capacity Ø52mm. Spindle Bore Ø61mm. Stroke 635mm. Maximum Speed 5,000rpm. Power 7.5kW. Torque 67 Nm. Turret 1 - No. Of Positions 12, No. Of Index Positions 24, 12 Driven Stations, Maximum Driven Tool Speed 6,000 rpm. Turret 2 - No. Of Positions 12, No. Of Index Positions 24, 12 Driven Stations, Maximum Driven Tool Speed 6,000 rpm. Turret Indexing Time 0.1 Sec/Position. Driven Tooling Power 18kW. Installed Power 65 kVA. Supply Voltage 400V. S/No.201 (2019). With Hydrafeed MSV 65 Bar Feeder. Maximum Bar Ø65mm. Automatic Loading For Continuous Operation. S/No.E02-19G202. (2019), High Pressure Coolant System, Chip Conveyor, Renishaw Tool Setting Arm, Pneumatic Part Ejector, Parts Catcher, Parts Conveyor, Visiport Spin Window, Signal Tower & Manuals. Machine Footprint (L x W x H) 2,840 x 2,190 x 2,030mm. Approx Weight 9,600kg. Please Note: Each Turret Includes 2 Turning Holders, 2 Double Ø25mm Boring Holders & 1 Radial Live Tool. No Barfeed Bushes Included Or Collets.

Condition: ready for operation (used), Year of construction: 2003, Machine type CNC turning and milling center Manufacturer WEILER Type DZ 67 / V3 Year of manufacture 2003 Condition Used Control system type CNC Control system Dcodpfsza Aqwsx Ackjh Siemens 840 D Location D-64625 Bensheim Turning diameter 220 mm Turning length 450 mm Control system Siemens 840 D Tool turret SAUTER VDI 30 - 12x Tool holders Various VDI 30 Bar feed LNS Quick Load Servo 3 mm Collets Various collets Main drive DC 27 kW Total power consumption 27 + 8.5 + 5 + X kW Machine weight approx. 6.5 t Space requirement approx. 10 x 2 x 2 m Additional information Various accessories - Collets - Chuck jaws - VDI tool holders with and without drive - Documentation

Condition: ready for operation (used), Machine type CNC turning machine Manufacturer WEILER Model UD 24 Year of manufacture Condition Used Control type CNC Control system BOSCH CC 200 Turning diameter 190 mm Turning length 190 mm Control system BOSCH CC 200 Total power consumption 12 kW Machine weight approx. 1.6 t Dedpeza Anpsfx Ackoch Space requirement approx. 2 (9) x 1.5 x 1.8 m

Condition: good (used), Year of construction: 1998, Used CNC turning lathe by Okuma Type: LCS 15 Includes tool holder Turning length: 280 mm Turning diameter: 270 mm Tool changer Year of manufacture: 1998 Dodpfx Aey U Iz Ssckoch Excluding bar feeder and chip extraction system.

Condition: good (used), Year of construction: 2007, Ref. -No.: 10650 Manufacturer: UMARO Dodozay H Aepfx Ackoch Type: SC27 CNC MS2 Year of construction: 2007 Type of control: CNC Control: Siemens Sinumeric 840 D Storage location: Halberstadt Country of origin: Rumänien Turning Height: 2500 mm Gear stage 2 speed range: -180 RPM Swing Diameter: 2700 mm Rapid Speed: 8000 RPM Max workpiece height: 2500 mm Max. Workpiece Weight: 30.000 kg Max torque faceplate: 40000 kNm Vertical adjustment of the crossbar support slide: 1200 mm Smallest immersion diameter: 360 mm Max. Cutting force support: 50000 Nm Drive motor faceplate: 100 kW Workpiece diameter: 2500 mm Horizontal path of the crossbar X-axis: +/- 1250 mm Vertical path of the chisel slide: 1500 mm Chisel slide cross-section 2*: 250 x 250 mm cutting speed: 140 m / min Cutting depth: 14 mm Tool change time: 1 min Max. vertical working feed: 6000 mm / min Max. cross feed: 8000 mm / min Travel speed: 8 m / min Piston diameter: 250 x 250 mm Stößelweg: 1500 mm Further information: The machine can be viewed while powered on by prior arrangement.

Condition: good (used), Year of construction: 2005, Turning diameter: max. 500 mm Turning length: 550 mm Djdpfxjzbaq Do Acksch Spindle bore: 65 mm Spindle speed: 5000 rpm including bar feeder

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. The machine was meticulously maintained by the previous owner. It was sold due to a factory closure Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Dcedpozaa T Nefx Acksh Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: reconditioned (used), Year of construction: 2012, MAZAK QUICK TURN NEXUS 100-II M Max. machining diameter: 280 mm Max. machining length: 334 mm Max. spindle speed: 6,000 rpm Max. milling spindle speed: 4,500 rpm Max. bar diameter: 51 mm Machine is equipped with: - CNC control Mazatrol Matrix - KITAGAWA 3-jaw chuck BB-06, diameter 169 mm - Tool Eye - C-axis - Main spindle with bar capacity 51 mm - NC tailstock - Reinforced coolant pump Dcsdpjzav Ehofx Acksh - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: used, Year of construction: 2012, Technical details: turning diameter: 420 turning length: 1230 mm swing over bed: 700 mm swing diameter over slide rest: 550 mm centre distance: 1390 mm y-axis: +/- 60 mm Dedet Acy Aspfx Ackech turning speeds: 3500 1/min turret (x-stations): 12 power capacity: 22 / 18,5 kW : 1 / 12 x BMT rapid traverse x + z axis: 20 / 24 m/min : 76 mm total power requirement: 50 kVA weight: 7,8 t dimensions of the machine ca.: 4,10 x 2,05 x 2,21 m CNC lathe with Y-Axis and driven tools, C-axis, tool eye, hydraulic 3-chaw-juck D= 250 mm, reinforced pump 15 bar, pressure-compensated clamping cylinder , 2 step clamping pressure, prepared for steady (without steady), progr. tailstock (dragging device), live tool device (3,7 kW, 3.000 rpm), chipconveyor, 1 pcs. live tool included approx. 15.500 working hours *

Condition: good (used), Year of construction: 1990, Control system: Siemens 840-C Faceplate diameter: 1800 mm Swinging diameter: 2000 mm Maximum turning height: 1100 mm (below tool) Table speed: 130 RPM Workpiece weight: 8000 kg Dcsdpfxozadage Ackeh Tool changer: 12 positions

Condition: good (used), Year of construction: 2011, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 406mm, 660mm maximum cutting length, 51mm Bar capacity main spindle, 30Hp 4,000rpm main spindle speed, Sub-spindle speed 4,000rpm, 20Hp power, Djdpfxsy Tkabo Ackjch milling speed 6,000rpm, 12 Station turret, swarf conveyor, tool setter, coolant

Condition: good (used), Year of construction: 2013, 300mm turning diameter, 510mm turning length, Y axis +/- 52.5mm, Dcedsy Tiphopfx Acksh 600mm swing, 51mm bar capacity, spindle speed 4,500rpm , 16 station turret, 15kW spindle motor, milling 6000rpm, C axis 0.001 degrees, sub-spindle speed 6,000rpm, Y axis +/- 52.5mm, Doosan FANUC-i control, tailstock, coolant, tool setter, parts catcher, 3 jaw chuck,low volt light

Condition: good (used), Year of construction: 2007, functionality: fully functional, Control: SIEMENS 840D PL ManualTurn turning diameter: 1.140 mm turning lenght: 4.200 mm turning diameter over slide: 800 mm faceplate diameter max.: 1.000 mm Djdpfx Ajzacdkeckjch Support Length of the bed slide: 1.000 mm Travel of the cross slide: 650 mm Width of the cross slide: 425 mm bed width: 710 mm Main Spindle spindle bore: 120 mm spindle diameter in front bearing: 190 mm Accessories 1 piece fix steady rest 10 pieces Multifix quick-change steel holder Typ D The machine has been general overhauled in 2007.

Condition: used, Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Dodjzacb Aspfx Acksch Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: as good as new (ex-display), The Numturn S 560/1500 is a state-of-the-art CNC Flat Bed Lathe designed for the Lathes category, offering high performance for large workpieces. This machine boasts a robust box-way design that ensures maximum precision while facilitating heavy machining tasks. Its powerful Siemens servo motor drives the main spindle through a 4-step transmission, allowing for infinitely variable spindle speeds and high torque across various speeds. Equipped with an 8-station VDI tool changer, the Numturn S 560/1500 maximizes productivity and flexibility in operations. The user-friendly Siemens 828D control enables quick setup through two electronic hand-wheels, resembling manual lathe operation for enhanced user experience. With a hydraulic tailstock featuring high clamping force and a reliable automatic central lubrication system, maintenance is efficient and straightforward. For those looking to enhance their productivity, the Numturn S 560/1500 represents an excellent solution in CNC Flat Bed Lathes. To learn more about this machine or to request a quote, don’t hesitate to contact us. Dcedpfx Aceuyg Erokjh

Condition: as good as new (ex-display), The Numturn 500/1500 FA is a precision CNC Flat Bed Lathe designed for a wide range of applications, making it an excellent choice for the CNC Flat Bed Lathes category. With a robust construction featuring heavy ribbing of the machine frame and wide hardened V-guides, this lathe is engineered for heavy-duty machining. The Fagor 8055i control enhances your workshop programming experience, while the automatic 8-station servo-driven tool turret significantly increases productivity and flexibility for both single part and small batch production of larger workpieces. Its hydraulic power chuck offers adjustable holding force, and the heavy-duty tailstock provides high clamping force for secure machining. The completely lockable enclosure and smart central lubrication system contribute to a low-maintenance operation, allowing for more efficient workflows. KNUTH leads the way in reliability and performance, so if you're looking for a CNC Flat Bed Lathe that delivers robust construction and precise functionalities, you can request a quote today. Dsdpom E Ty Nofx Ackoch

Condition: excellent (used), Year of construction: 2020, 300mm max. machining diameter, 600mm swing over bed, 510mm max turned length, 4,500rpm spindle, 6,000rpm milling, 65mm bar capacity, 12 station turret, 15kW spindle motor, Siemens 828 control, 3 jaw power chuck, C axis & Milling, Tool presetter, Tailstock, Parts catcher, Swarf Conveyor, Dedpfx Acey S Trkekech

Condition: ready for operation (used), Year of construction: 2014, operating hours: 4,416 h, functionality: fully functional, turning diameter over cross slide: 500 mm, turning length: 630 mm, turning diameter: 350 mm, spindle bore: 65 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 195 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 3,500 rpm, total height: 1,720 mm, total length: 2,870 mm, total width: 1,675 mm, overall weight: 4,500 kg, chuck outer diameter: 260 mm, spindle nose: A2-6, Equipment: documentation/manual, rotational speed infinitely variable, The Hwacheon Hi-Tech 200BL is a robust CNC lathe that stands out in practice for its strikingly simple operation. The machine features an intuitive design and predictable performance, making setup and operation feel quickly familiar. Dcodpfxjyvqw So Ackjh A major advantage is the configuration with only an X and Z axis. The lack of additional axes and complex functions keeps the operation clear and efficient. This HWACHEON HI-TECH 200BL machine is standard equipped with: - Chip conveyor + collection bin. - Schunk 3-jaw chuck (ROTA NC Plus 260-86) including various sets of top jaws. - Original HWACHEON and FANUC documentation. Weight & dimensions: - 4,500 kg - approx. 2870 x 1675 x 1720 mm (LxWxH)

Condition: good (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 210 mm, turning length: 1,000 mm, turning diameter: 330 mm, spindle bore: 40 mm, spindle speed (max.): 3,500 rpm, spindle motor power: 7 W, Equipment: documentation/manual, Year of manufacture: 2000 Turning length: 1000 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 210 mm Distance between centres: 1000 mm Control type: FANUC Spindle nose: Camlock D1-4 Spindle bore: 40 mm Max. spindle speed: 3,500 rpm Dcjdpfx Asxd Aigeckoh Spindle motor power: 7.5 kW Dimensions (L x W x H): 2100.0 × 1200.0 × 1600.0 mm Weight: 1200 kg

Condition: ready for operation (used), Year of construction: 2005, turning diameter over cross slide: 570 mm, turning length: 2,000 mm, spindle bore: 62 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 3 rpm, workpiece weight (max.): 2,000 kg, Equipment: rotational speed infinitely variable, The VDF 560 DUS are the most popular teach-in lathes from VDF Boehringer in terms of turning diameter. With a standard chuck size of 315 mm or more, these machines offer optimal machining efficiency for the production of single parts and small series. This machine is currently on display in our showroom; an on-site inspection is possible! Scope of delivery: Includes drawer cabinet with various tools and Multifix holders. Specifications Manufacturer: VDF Boehringer Model: DUS 560 TI Dodpjwv S Rtjfx Acksch Year: 2005 Condition: Used Stock number: 00164 Maximum turning diameter: 570 mm Maximum turning length: 3000 mm Spindle bore: 62 mm Speed (min-max): 3 - 2500 rpm Spindle power: 19 kW Spindle mount: DIN 55 027 Gr. 8 Tool turret: Multifix Turret positions: 2 Tailstock taper: MK5 CNC control brand/type: Heidenhain Manual Plus 4110

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 87350 € 1650.92 € 540 mm 1500 mm 85 mm 310 mm 350 mm D1-8 1/20 MK 3 27 - 2250 1/min 5000 mm/min 8000 mm/min 280 mm 75 mm 5 MK 190 mm 9 / 13,5 (S1 / S6 40%) kW 0,02 mm 0,016 mm ISO3655 3340 mm 1905 mm 2235 mm 3400 kg DREI BETRIEBSARTEN: CNC / TEACH-IN / MANUELL CNC Steuerung Siemens 828D • 10,4-Zoll-Farbbildschirm • Lineare Interpolation • Kreisinterpolation • Helixinterpolation • Skip-Funktion • Werkstückkoordinatensystem • Drehung des Koordinatensystems • Gewindeschneiden ohne Ausgleichsfutter (rigid tapping) • Spiegelung, Skalierung und Drehung • Drehzyklus • ShopTurn-Software Dcjdpezbvabsfx Ackoh Große Spindelbohrung, mit Präzisionslagernfürhohe Genauigkeit und dauerhafte Schnittstabilität. Präzisionskugelumlaufspindel Ø 40 mm (Klasse C5) auf der Z-Achse und Kugelumlaufspindel Ø 25 mm (Klasse C3) auf der X-Achse. 2-Achsen AC Servomotoren Lünette 50-300 mm, Rollentyp. Manuelle Reitstockpinole, Durchmesser 75 mm (MK5), Verfahrweg 190 mm. Programmier- und Bedienungsanleitungen. Elektronisches Handrad für X- und Z-Achse Manueller 4-Stationen-Werkzeughalter (25 x 25 mm) Automatisches Schmiersystem Vollständig geschlossener Spritzschutz mit Schiebetür und Fenster Spänebehälter mit Kühlmitteltank Abnahmebericht LED-Arbeitsleuchte Kühlmittelsystem Vorbereitung für Ölkühlsystem OPTIONEN (Preise auf Anfrage): Fagor Steuerung anstelle Siemens Manuelles oder hydraulisches Spannfutter 8fach Revolver, wahlweise mit angetriebenen Werkzeugen elektrisch drehbarer 4-fach Werkzeughalter Späneförderer Hochdruckkühlmittelpumpe weitere Optionen auf Anfrage ALTERNATIVE: Variante FCL-2140 mit 1000 mm Spitzenweite Variante FCL-2180 mit 2000 mm Spitzenweite

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 77850 € 1471.37 € 460 mm 1000 mm 56 mm 230 mm 350 mm D1-6 1/20 MK 3 33 - 3100 1/min 5000 mm/min 8000 mm/min 280 mm 75 mm 5 MK 190 mm 9 / 13,5 (S1 / S6-40%) kW 0,02 mm 0,01 mm ISO3655 2840 mm 1905 mm 2235 mm 2900 kg DREI BETRIEBSARTEN: CNC / TEACH-IN / MANUELL CNC Steuerung Siemens 828D • 10,4-Zoll-Farbbildschirm • Lineare Interpolation • Kreisinterpolation • Helixinterpolation • Skip-Funktion • Werkstückkoordinatensystem • Drehung des Koordinatensystems • Gewindeschneiden ohne Ausgleichsfutter (rigid tapping) • Spiegelung, Skalierung und Drehung • Drehzyklus • ShopTurn-Software Mit Präzisionslagern, die einen Spindelrundlauf von weniger als 0,005 mm gewährleisten, fürhohe Genauigkeit und dauerhafte Schnittstabilität. Präzisionskugelumlaufspindel Ø 40 mm (Klasse C5) auf der Z-Achse und Kugelumlaufspindel Ø 25 mm (Klasse C3) auf der X-Achse. 2-Achsen AC Servomotoren Lünette 20-160 mm, Rollentyp. Dodpfszbu U Rex Ackjch Manuelle Reitstockpinole, Durchmesser 75 mm (MK5), Verfahrweg 190 mm. Programmier- und Bedienungsanleitungen. Elektronisches Handrad für X- und Z-Achse Manueller 4-Stationen-Werkzeughalter (25 x 25 mm) Automatisches Schmiersystem Vollständig geschlossener Spritzschutz. Spänebehälter mit Kühlmitteltank Abnahmebericht LED-Arbeitsleuchte Kühlmittelsystem Vorbereitung für Ölkühlsystem OPTIONEN (Preise auf Anfrage): Fagor Steuerung anstelle Siemens Manuelles oder hydraulisches Spannfutter 8fach Revolver Späneförderer Hochdruckkühlmittelpumpe ALTERNATIVE: Variante FCL-1860 mit 1500 mm Spitzenweite

Condition: used, CNC turning machine TRAUB, Type TND 400 Serial No. 708, Year of manufacture 1996 CNC control TRAUB TX 8 F Nominal turning diameter: 400 mm Swinging diameter over bed: max. 470 mm Spindle bore in draw tube: 65 mm Motor power, spindle drive: 22 kW Total power consumption: 35 kW Mains connection: 380 volts, 50 Hz - Electronic handwheel - RS 232 data interface Dsdpfx Aozacwdeckjch - Turret with 12 tool positions, VDI 40 - Includes 8 tool holders, VDI 40 - 3-jaw chuck, Ø 225 mm, SMW Autoblok, Type KNCS-N-Ø 225-65 Includes a large quantity of chuck jaws - Hydraulic internal expanding cylinder, SMW, Type ZHDAS-130-67 - Chip conveyor, KNOLL, Type 200 S-1/600 - Coolant system - Hydraulic unit (L x W x H 650 x 500 x 1000 mm) Space requirement L x W x H: 4800 x 2000 x 2100 mm Space requirement, base machine L x W x H: 3500 x 2000 x 2100 mm Space requirement, chip conveyor L x W x H: 4500 x 700 x 1550 mm Weight: approx. 5 tons Good condition Machine is ready for demonstration. The internal expanding cylinder for workpiece clamping needs to be repaired.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Siemens control system, Turret, Y-axis, Dcedpjzakq Sjfx Ackeh Counter spindle, High-pressure system, FMB loading magazine.