Used Energy Generation for sale (11,966)

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging. Crjdsznz Ezjpfx Aarsf

Condition: new, For sale: Professional power controller (thyristor-based) Advanced Energy Thyro-A series. The device is NEW – never used (warehouse stock). High-end industrial equipment designed for advanced production installations. 🔧 Technical specifications: Manufacturer: Advanced Energy Model: Thyro-A 3A 400-350 HF RL3 Voltage: 400 V Current: 350 A Output: Relay Out 4A / 250V Type: thyristor power controller (SCR) ⚙️ Applications: industrial furnaces heating systems industrial automation power control in production lines 📦 Included in the set: Crodpfx Aajyw T Ipjrsf 3x Thyro-A modules industrial enclosure / heat sink cooling fan full set as shown in photos ✅ Condition: NEW – unused May show minimal signs of storage. Fully functional.

Condition: new, Year of construction: 2023, operating hours: 1 h, functionality: fully functional, overall weight: 320 kg, fuel type: diesel, tank capacity: 30 l, color: green, output current: 39 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 9.9 kW (13.46 HP), nominal power (apparent): 13 kVA, continuous power: 10 kW (13.60 HP), continuous power (apparent): 11 kVA, total length: 1,360 mm, total width: 650 mm, total height: 980 mm, rotational speed (max.): 3,000 rpm, motor manufacturer: China, type of cooling: water, Energy Generator T1200FULL Dealer of ENERGY Power for life The Energy 13.2 kVA Generator T12000FULL diesel generator is available for sale at Van Delft Staal / Aggregaat.store, designed to provide a stable power supply during any power outage. The T12000FULL is equipped with AVR technology (Automatic Voltage Regulation), ensuring the voltage remains constant at all times, making it ideal for connecting sensitive equipment. An optional ATS (Automatic Transfer Switch) is also available for off-grid systems and automatic switching during power outages. This diesel generator operates quietly, efficiently, and is built for long-term reliability, exactly what you would expect from Van Delft Staal/Aggregaat.store. Key advantages: Power: 13.2 kVA / 10.6 kW Power: 9.9 kVA / 7.9 kW Sockets: 230V-16A and 400V-32A 3000 rpm AVR system for stable voltage Predisposition for ATS: Prepared for ATS (Automatic Transfer Switch). This means the unit is already wired or equipped with the necessary connections to install an external switch. Crodpfxjy S Tq Te Aaref Quiet, fuel-efficient, and easy to maintain Perfect as a generator during power outages. We ensure all generators are ready to start and operate. In stock.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: EY-R33Y, overall weight: 1,275 kg, fuel type: diesel, tank capacity: 315 l, color: green, power: 32.07 kW (43.60 HP), output current: 47 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 29 kW (39.43 HP), nominal power (apparent): 36 kVA, continuous power: 26.4 kW (35.89 HP), continuous power (apparent): 33 kVA, total length: 2,550 mm, total width: 1,037 mm, total height: 1,605 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yanmar, type of cooling: water, Energy Generator EY-R20K – Rental Version The robust Energy Generator EY-R33Y is a powerful 33 kVA Yanmar diesel generator, available for purchase at Aggregaat.store/Van Delft Staal, designed for construction sites to provide a stable power supply even during power outages. Thanks to its modern Yanmar diesel engine, this generator offers minimal emissions and optimal fuel consumption. The EY-R33Y is equipped with AVR technology (Automatic Voltage Regulation), ensuring that the voltage remains constant at all times, making it ideal for connecting sensitive equipment. This diesel generator operates quietly, efficiently, and is built for long-term reliability – exactly what you would expect from Aggregaat.store/Van Delft Staal, a dealer of ENERGY Pure Power. Key benefits: Power: 20 kVA / 16 kW PRP Power: 22 kVA / 17.6 kW LTP Codpfx Asy S Tnxearsrf Powerful 1500 rpm AVR system for stable voltage Quiet, fuel-efficient, and easy to maintain ATS preparation, plug, and optional ATS control panel Perfect as a generator during power outages or as a mobile power source We also provide all maintenance and repair services. We ensure all generators are ready to start and operate. In stock. Aggregaat.store/Van Delft Staal – your partner for reliable energy, wherever and whenever you need it.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: EY-30Y-SA Yanmar, overall weight: 890 kg, fuel type: diesel, tank capacity: 90 l, color: green, power: 30.16 kW (41.01 HP), output current: 43 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 26 kW (35.35 HP), nominal power (apparent): 33 kVA, continuous power: 24 kW (32.63 HP), continuous power (apparent): 30 kVA, total length: 2,000 mm, total width: 850 mm, total height: 1,275 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yanmar, type of cooling: water, Aggregaat.store/Van Delft Staal, Dealer of ENERGY Power for Life Csdpsy S Th Sefx Aarjrf Generator set for industrial use, model EY-30Y-SA Electrical power 30 kVA, 24 kW PRP; 33 kVA, 26.4 kW LTP, 400/230 V three-phase, 50 Hz, 1500 rpm. Configuration: Diesel engine Yanmar 4TNV98-IGECS (Stage IIIA) Automatic Voltage Regulator (AVR) Design with weather- and sound-proof enclosure, fuel tank, fuel leak protection tray, and muffler (sound level 70 dB +/- 3 at 7 meters) Automatic Mains Failure (AMF) panel with complete power connection box, circuit breaker, battery charger, and electronic circuit board. Without automatic transfer switch (ATS). EY-30Y-SA - Datasheet Set with 4 sockets + residual current device (RCD) for generator sets from 30 kVA to 45 kVA Set with 4 sockets + residual current device (RCD) for industrial series generator sets from 30 kVA to 45 kVA KIT 4 PRESE (30-45kVA) - Datasheet Socket kit including (standard version): - 1 x CEE 400V 5P 63A - 1 x CEE 400V 5P 16A - 1 x CEE 230V 3P 16A - 1 x Schuko 230V - Circuit breaker for each socket - General residual current device (RCD) ATS automatic transfer switch for an off-grid system, and automatic switching during power outages. ATS 45A model ATS-31, ATS connector ATS 45A three-phase, 23kVA to 31kVA If in stock, our items can be picked up directly from our location in Nieuwkuijk. Would you prefer to have your items delivered? That is possible! We deliver throughout the Netherlands. As a family-owned business, we value personal contact. Short lines of communication, a customer-focused approach, and appropriate advice. Since our founding in 1975, we have been working on further expanding our company, and we are characterized by: More than 50 years of experience Personal advice for your projects Large stock with fast delivery times We ensure that all generators are ready to start and operate. 1 year warranty.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EY-14P-SA Perkins, overall weight: 425 kg, fuel type: diesel, tank capacity: 55 l, color: green, power: 11.84 kW (16.10 HP), output current: 19 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 11.4 kW (15.50 HP), nominal power (apparent): 14 kVA, continuous power: 10.4 kW (14.14 HP), continuous power (apparent): 13 kVA, total length: 1,580 mm, total width: 700 mm, total height: 1,050 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, additional equipment features: Perkins, Energy EY-14P-SA Perkins diesel generator. The Energy Generator EY-14P-SA is a robust 13 kVA Perkins diesel generator from Aggragaat.store/Van Delft Staal, perfect for use during power outages, construction projects, or as an emergency power supply. This modern Perkins diesel generator provides stable power with low fuel consumption. Crodjy S Tdmjpfx Aarof Thanks to the integrated AVR technology (Automatic Voltage Regulation), the voltage remains constant, which is essential for the safe use of sensitive electrical equipment. The EY-14P-SA combines power, silence, and durability in one compact solution. Electrical Power: 13kVA, 10.4kW PRP; 14.3kVA, 11.4kW LTP, 400/230V three-phase, 50Hz, 1500 rpm. Configuration: Diesel engine: Perkins 403A-15G1 (non-emission); Alternator with automatic voltage regulation (AVR); Version with weather and soundproof canopy RAL 9010 (light grey); Fuel leakage protection basin and residential muffler (noise level 70dB +/- 3 at 7 meters); Automatic mains failure panel (AMF) with full power terminal box, magnetothermic switch, battery charger, and electronic board. Advantages of the EY-14P-SA: Power: 13 kVA / 10.4 kW PRP Power: 14.3 kVA / 11.4 kW LTP Clean and efficient 1500 rpm AVR system for constant voltage Low-noise, easy-to-maintain diesel engine Ideal as a generator during power outages or as a mobile power source Color: RAL 6017, bottom side dark grey RAL 7012 Optional plug unit 400V 32A, 63A, and 220V 16A, additional cost: €500. Also available for all your maintenance and repair needs. In stock.

Condition: used, Year of construction: 2023, Rated capacity 4,1 kW current intensivity 7,2 A temperature max. 65,8 °C operating pressure max. 42 bar temperature (Water): max. 35 °C operating pressure (Water): max. 6 bar Ambinent temperature -5 / +43 °C weight of the machine ca. 143 kg Cjdoynmnvjpfx Aarsrf dimensions of the machine ca. 1,3 x 0,6 x 0,8 m Chiller ICS COOL ENERGY - IC 220 - Refrigerant R410A

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: EY-45K-SA, overall weight: 1,220 kg, fuel type: diesel, tank capacity: 120 l, color: green, power: 40.89 kW (55.59 HP), output current: 65 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 41.5 kW (56.42 HP), nominal power (apparent): 49 kVA, continuous power: 36 kW (48.95 HP), continuous power (apparent): 45 kVA, total length: 2,400 mm, total width: 924 mm, total height: 1,490 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Kohler, type of cooling: water, Aggregaatstore/Van Delft Staal Energy Generator EY-45K-SA 6 kVA Stage V The Energy Generator EY-45K-SA is a powerful 45 kVA KOHLER diesel generator, available for purchase from Aggregaatstore/Van Delft Staal. It is designed to provide a stable power supply during any power outage. Thanks to the modern KOHLER Stage V diesel engine, this generator meets the strictest emission standards, with minimal emissions and optimal fuel consumption. The EY-45K-SA is equipped with AVR technology (Automatic Voltage Regulation), ensuring that the voltage remains constant at all times, making it ideal for connecting sensitive equipment. This diesel generator operates quietly, efficiently, and is built for long-term reliability, just what you would expect from Van Delft Staal. Benefits and options at a glance: Power: 45 kVA / 36 kW PRP Credezd Aw Ropfx Aarof Standby power LTP 49.5 kVA / 39.6 Stage V emission standard – environmentally friendly and powerful 1500 rpm Quiet, fuel-efficient, and easy to maintain AVR system for stable voltage Interior lighting with sensor Engine coolant preheating system from 0 to 450 kVA Manual oil extraction pump up to 300 kVA Double stage insulation control Mains battery charger and engine preheater Connector for commands to connect an external ATS ATS automatic transfer switch for an off-grid system. And automatic switching during power outages Tank cap with lock Perfect as a generator for power outages or mobile power supply We ensure that all generators are ready to start and operate. 1 year warranty. We also provide service and maintenance.

Condition: new, For sale: high-quality industrial heating element (heizstab) by HTT energy GmbH. Condition: New, unused, stored in warehouse (may have minimal storage marks). 🔧 Technical specifications: Manufacturer: HTT energy GmbH Article number: 20178 Order number: 7122-001 Power: 50 kW Voltage: 400V (3-phase), 50-60 Hz Current: 72.2 A Protection rating: IP65 Max pressure: 10 bar Temperature range: 5 - 350°C Year of production: 2021 📏 Construction: flange heater multi-tube design junction box with terminals 💡 Application: heating water, oil, and other liquids industrial tanks technology installations Crsdpfjyx I Rzjx Aaref heating systems 📦 Included: Exactly what is shown in the photos

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: unexamined, Technical parameters: • Manufacturer: AUSTRIAN ENERGY • Type: Dual pressure drum boiler (1999) Cedpfx Aaoy D Hy Eorsrf • HP steam flow: t/h 40.8 • LP steam flow: t/h 17.3 • HP steam parameters: bar/°C 52 / 425 • LP steam parameters: bar/°C 4.2 / 180 • Flue gas temperature at HRSG outlet: °C 80 • Flue gas stream to the stack: t/h 468, k Nm3/h 482 • Heat recovered by the steam and water cycle from flue gas in HRSG: MWt 45.9 • Maximum output of DH exchanger: MWt 8.0 • Operating hours: 76,000 hours The high- and low-pressure sections of the equipment and the drums (HP and LP) consist of 6 independent, transportable modules. The boiler wall insulation is partial and requires replacement.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: EY-30B-SA, overall weight: 785 kg, fuel type: diesel, tank capacity: 100 l, color: green, power: 30.16 kW (41.01 HP), output current: 44 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 26 kW (35.35 HP), nominal power (apparent): 33 kVA, continuous power: 24 kW (32.63 HP), continuous power (apparent): 30 kVA, total length: 1,800 mm, total width: 850 mm, total height: 1,275 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Baudouin, type of cooling: water, In stock at Agregaat.store/Van Delft Staal, ENERGY dealer. ENERGY INDUSTRIAL GENERATOR SET MODEL EY-30B-SA, 30 kVA PRP, 33 kVA LTP, 400/230 V THREE-PHASE, 50 Hz, 1500 RPM. CONFIGURATION: DIESEL ENGINE BAUDOUIN 4M06G35/5 LINZ ALTERNATOR PRO18S C/4 WITH AVR WEATHER- AND SOUND-PROOF GREEN HOUSING Cedpfey S T Tbjx Aarsrf RAL6017. ROOF, BASE FRAME AND PANELS GRAY RAL7012. AUTOMATIC MAINS FAILURE PANEL (AMF), DEEPSEA DSE4520 CONTROL PANEL, BATTERY CHARGER AND SOCKET SET: 1 x CEE 400V 5P 63A 1 x CEE 400V 5P 16A 1 x CEE 230V 3P 16A 1 x SCHUKO 230V CIRCUIT BREAKER FOR EACH SOCKET GENERAL DIFFERENTIAL CIRCUIT BREAKER TYPE "A" QUICK CONNECTION FOR ATS OPTIONAL ATS CONTROL CABINET Ready for start-up 1-year warranty

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: EY-33Y-SA, overall weight: 1,000 kg, fuel type: diesel, tank capacity: 120 l, color: green, power: 32.07 kW (43.60 HP), output current: 47 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 29 kW (39.43 HP), nominal power (apparent): 36 kVA, continuous power: 26.4 kW (35.89 HP), continuous power (apparent): 33 kVA, total length: 2,400 mm, total width: 924 mm, total height: 1,490 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yanmar, type of cooling: water, In stock at AGGREGAAT.STORE/VAN DELFT STAAL Dealer of ENERGY Power for life INDUSTRIAL GENERATOR SET MODEL EY-33Y-SA, 33 kVA PRP, 36.3 kVA LTP, 400/230 V THREE-PHASE, 50 Hz, 1500 RPM. CONFIGURATION: - DIESEL ENGINE YANMAR 4TNV98C-IYE (STAGE V) - LINZ ALTERNATOR MODEL PRO18M D/4 C WITH AVR - WEATHER- AND SOUND-PROOF HOUSING, GREEN RAL6017. ROOF, BASE FRAME AND PANELS, GREY RAL7012. AUTOMATIC PANEL (AMF) WITH BATTERY CHARGER AND COMAP AMF8 CONTROL BOARD, WITH SOCKET SET: Codsy S T Aijpfx Aarjrf - 1 x CEE 400V 5P 63A - 1 x CEE 400V 5P 16A - 1 x CEE 230V 3P 16A - 1 x SCHUKO 230V - MAGNETOTHERMAL SWITCH FOR EACH SOCKET If in stock, our items can be collected directly from our location in Nieuwkuijk. Would you prefer to have your items delivered? No problem! We deliver throughout the Netherlands. As a family-owned business, we value personal contact. We offer short communication lines, a customer-focused approach, and tailored advice. Since our establishment in 1975, we have been continuously expanding our business and are characterized by: More than 50 years of experience In stock! 1 year warranty Also for all your maintenance and repair needs.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: EY-R20K, overall weight: 780 kg, fuel type: diesel, tank capacity: 130 l, color: green, power: 18.02 kW (24.50 HP), output current: 29 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 17.6 kW (23.93 HP), nominal power (apparent): 22 kVA, continuous power: 16 kW (21.75 HP), continuous power (apparent): 20 kVA, total length: 1,875 mm, total width: 880 mm, total height: 1,170 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Kohler, type of cooling: water, Energy Generator EY-R20K – Rental Version The robust Energy Generator EY-R20K is a powerful 20 kVA Kohler diesel generator, available for purchase from Van Delft Staal, designed for use on construction sites and providing a stable power supply during any power outage. Thanks to its modern Kohler diesel engine, this generator features minimal emissions and optimal fuel consumption. Crodsy S Tkyopfx Aarjf The EY-R20K is equipped with AVR technology (Automatic Voltage Regulation), which ensures a consistently stable voltage, making it ideal for connecting sensitive equipment. This diesel generator operates quietly and efficiently and is built for long-term reliability – exactly what you would expect from Aggregaat.store/Van Delft Staal, your ENERGY Pure Power dealer. Key benefits: Power: 20 kVA / 16 kW PRP Power: 22 kVA / 17.6 kW LTP Powerful 1500 rpm AVR system for stable voltage ATS preparation, plug, and optional ATS control panel Quiet, fuel-efficient, and easy to maintain Perfect as a generator during power outages or as a mobile power supply We also handle all your maintenance and repair needs. We ensure all generators are ready to start and operate. In stock. Aggregaat.store/Van Delft Staal – your partner for reliable energy, wherever and whenever you need it.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: EY-S30Y-SA, overall weight: 1,600 kg, fuel type: diesel, tank capacity: 250 l, color: green, power: 30.3 kW (41.20 HP), output current: 43 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 24 kW (32.63 HP), nominal power (apparent): 26 kVA, continuous power: 24 kW (32.63 HP), continuous power (apparent): 33 kVA, total length: 2,400 mm, total width: 1,220 mm, total height: 2,100 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yanmar, type of cooling: water, Energy Generator EY-S30Y Stage IIIA For sale, in stock! The Energy Generator EY-S30Y is a powerful kVA Yanmar diesel generator and is available for purchase at Van Aggregaat.store/Delft Staal, designed to provide a stable power supply during any power outage. Thanks to the modern Yanmar Stage IIIA diesel engine, this generator meets the strictest emission standards, with minimal emissions and optimal fuel consumption. The EY-S30Y is equipped with AVR technology (Automatic Voltage Regulation), which ensures that the voltage remains constant at all times, ideal for connecting sensitive equipment. This diesel generator operates quietly, efficiently, and is built for long-term reliability, exactly what you would expect from Van Delft Staal. Benefits at a glance: Power: 30 kVA / 24 kW PRP Power: 33 kVA / 26.4 kW LTP Socket unit 400V - 16A - 63A and 230V - 16A Stage IIIA emission standard – environmentally friendly and powerful AVR system for stable voltage ATS socket and ATS control system 1500 RPM Super silent 50db, very quiet! Economical and easy to maintain Perfect as a generator during power outages or for mobile power supply Also for all your maintenance and repairs. In stock. We ensure that all generators are ready to start and operate. Price €15,500,- excluding VAT, including VAT €18,755,- Aggregaat.store/Van Delft Staal, your partner in reliable energy, wherever and whenever you need it. Codpfxey S S Svj Aarsrf

Condition: new, Opportunity: Glass modules from Swiss liquidation, 96 glass modules Cjdpfx Ajyxth Sjarjrf

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 8,000 kg, Siemens Energy transformer Year of manufacture: 2023, new, not commissioned Incl. enclosure Cjdpfjyw Tf Uox Aarjrf

Condition: not inspected (used), ADVANCED ENERGY M/N: 3152327-002A Codswncb Tepfx Aarerf S/N: 112919 F/R A For further data see type plate illustration, unit is untested.

Condition: not inspected (used), Advanced Energy Industries Credpfewnbvpjx Aaref M/N: 3155018-000D S/N: 112480

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, wheel diameter: 700 mm, gear diameter: 1,000 mm, wheel width: 152 mm, workpiece spindle speed (max.): 67 rpm, feed length X-axis: 610 mm, feed length Y-axis: 610 mm, feed length Z-axis: 725 mm, pivoting range: 95 °, spindle bore: 203 mm, travel distance X-axis: 610 mm, travel distance Z-axis: 725 mm, Equipment: rotational speed infinitely variable, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Codoxaqa Sspfx Aarorf Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 25582, Equipped with: Fanuc 30ia Control Hydraulic System Coolant System Chip Conveyor Pneumatics Lube System Jib Crane Change Gears Mist Collector Transformer Work Light Stack Light Specifications: Extreme Ratio: 10:1 Root Angle Range (B-Axis): -5 deg. TO 90 deg. Equivalent Root Angle Range: -8 deg. to 90 deg. (Equivalent refers to cradle type machine.) Face Hobbing: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -152 mm TRI-AC Cutter w/13 Blade Groups Max. Full Depth: 0.550" Max. Face Width: 1.6" Face Milling: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -7.5" Diameter Cutter Max. Full Depth: 0.625" Max. Face Width: 1.6" Max. Swinging Base Travel (B-Axis): -5 deg. to 90 deg. Max. Vertical Travel (Y-Axis): -4" to 7" Max. Horizontal Travel (X-Axis): -6" to 4" Sliding Base Travel (Z-Axis): 2" to 12" Machine Center to Work Spindle Face (Fixed): 4.5" Tooth Number: 5 to 200 Inclusive Cutting Diameters: Conventional Face Milling: 1.1" to 7.5" Helixact: 100mm to 200mm Fine Pitch: 102mm to 152mm Coarse Pitch: 152mm only Speeds: B-Axis--Swinging Base (Degrees per Second): 30deg./sec. A-Axis--Work Spindle (Face Milling)(RPM): 0-75 A-Axis--Work Spindle (Face Hobbing)(RPM): 0-375 Cedjzn Aymepfx Aarerf C-Axis--Cutter Spindle (RPM): 30-500 X-Axis--Horizontal (Inches per Second): 4.92"/sec. Y-Axis--Vertical (Inches per Second): 4.92" Z-Axis--Sliding Base (Inches per Second): 4.92"/sec. Work Spindle: Diameter of Taper at Large End (#39 Taper): 3-29/32" Taper per Foot: 39/64" Depth of Taper: 3" Floor Space: 95.75" x 63.5" Height (less mist collector): 90.75" Approx. Weight: 22,000 lbs

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Crjdpjruakgjfx Aaref Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs Cedpoxdfazjfx Aarorf

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Crjdpoxdfa Usfx Aarof Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Codpertrykefx Aarjrf Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: used, operating hours: 2,764 h, color: gold, total length: 1,600 mm, total width: 720 mm, total height: 1,300 mm, Empty weight: 600 kg Price: On request - Year: 0 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 650863 - Operating hours: 2764 - Transport dimensions: 1600mm x 720mm x 1300mm (l x w x h) - Transport weight [kg]: 600kg - Transport packages [pcs.]: 1 Financial information Crjdpfx Aajzrg Ntsrsf VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum