Used Chlorine Dioxide Generator for sale (11,995)

Condition: excellent (used), Used CHP Plant Lredpfx Agjwthziszsu Manufacturer: Indop Year of manufacture: 2014 Fuel type: natural gas Electrical output: 50 kW Thermal output: 80 kW Operating hours: 28,901 h Engine type: MAN GAS ENGINE e0834 e32 (54 kW) Number of cylinders: 4 Available: 3 units Indop 50 kW at €13,400 each 2 units Indop 20 kW at €8,600 each 1 unit Energ-g 50 kW at €13,400 Test run possible.

Year of construction: 1991, condition: excellent (used), We can offer you CO2 carbon dioxide gas used storage tank vessel Volume 21050L; Working pressure 22 bar; Export from EU We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane Lsdpfjk Eac Dsx Agzjru We would also be pleased to prepare an offer for you or provide you with further information. To discuss the possibilities, please contact us by phone or e-mail.

Condition: like new (used), Year of construction: 2023, Generator power unit emergency power generator, make: Emean, type: DAGFS 50, 50 kW, 50 Hz, 400 Volt, 3-phase, 4-cylinder, water-cooled, IP23, year of manufacture: 2023. Features: 3 x 16 amp sockets (blue) and 1 x 32 amp socket (red), dimensions: 2.30 m x 0.95 m x 1.25 m, weight: approx. 900 kg, new, unused. Rated power: 50 kVA, continuous power max. 40 kVA, standby power: 55 kVA / 44 kW, rated current 33 amp, voltage 400/230 V, 50 Hz, 230 V, 50 Hz. Fuel consumption at 75% load: approx. 11 l/h, fuel consumption on standby: approx. 4 l/h. Drive unit: 4-cylinder inline diesel engine by RICARDO, engine output at 1500 rpm: 45 kW, engine output at 1800 rpm: 55 kW, displacement: 1,500 cc, fuel tank capacity: 99 liters. Simple and compact design with soundproofed metal enclosure, forklift tine pockets for easy and safe handling, 3 x CEE 16 amp sockets (3-pin, 230 V), 1 x CEE socket (5-pin, 400 V), terminal connectors for cable connection to external loads, e.g., site distribution boxes, 2 starter batteries 12 V for 24 V starter, weight: approx. 870 kg. Ljdpjv Hamxefx Agzeru

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Lrodpfx Agjxfrv Eszju Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean

Condition: good (used), Year of construction: 2005, laser hours: 4,029 h, laser power: 2,000 W, We offer a generator and a resonator TRUMPF TCF1. These components come from a portal 3D laser Lrsdpfx Aev Ic Sasgzju

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Lrodpfxjw U N Dae Agzeu

Year of construction: 2025, condition: new, functionality: fully functional, Complete - New MWM GAS generator set, CHP as option, Generator 10500V/50Hz Ljdpjv Uag Iefx Agzjru

Condition: excellent (used), power: 110 kW (149.56 HP), fuel type: diesel, Year of construction: 2018, operating hours: 3,680 h, General information Year of manufacture: 2018 Model year: 2018 Field of application: Construction Lodpfx Ajxqryujgzsru Serial number: 107888 Weights GVW: 24.200 kg Functional Mast length: 10 m CE mark: yes Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Additional information Please contact Ferdinand Pater for more information LH24, year 2018, 3600 hours, perfect condition New engine oil and origional Liebherr filters New tires Please ask for rental options!!

Condition: used, mileage: 67,050 km, power: 95 kW (129.16 HP), first registration: 10/2002, overall weight: 4,600 kg, fuel type: diesel, color: green, gearing type: automatic, number of seats: 6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, Internal vehicle number: 0739D ----Why autonext GmbH? One of the largest commercial vehicle exhibitions in Germany. Always over 400 vehicles immediately available. Largest selection - Best price. More than 1,000 satisfied customers per year - Top customer reviews. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----- * 1st owner (government vehicle, which means continuous maintenance) * Perfectly suited for camper conversion * Upon request, we offer a trailer hitch retrofit for only €599.00 * Window tinting is available upon request. * Good and well-maintained condition * German vehicle * Full service history * Very good all-weather tires * Number of seats: 6 * Automatic transmission * Air conditioning * "Camino" vehicle generator from "SET Stromerzeuger GmbH" with regular maintenance and a running time of only 1,510 hours * Electrolux heating and air conditioning * Webasto auxiliary heating * Rear axle differential lock * Rear table * Pop-up roof * Detachable roof spoiler * 230-volt sockets * CEE plug * 2nd reinforced battery 88 Ah * Passenger side airbag * Driver side airbag * Electrically adjustable and heated exterior mirrors (both) * Estate floorpan Lredpfx Agjvhw Sbjzou * 150 A generator * Passenger side grab handle * Rear door with glass (opening angle 180 degrees) * Fuel tank: 100 L main tank * Reading light * Front stabilizer bar * Auxiliary heater * Rear dual tires * Rear stabilizer bar * Rear-wheel drive * 2.2 L - 95 kW CDI engine * Wheelbase 4025 mm * Gross vehicle weight 4.60 t * New MOT/AU inspection upon request ----Warranty & "TÜV Professional Check" are of course available from us! We'd be happy to accept your vehicle as part payment! We can also create a customized financing or leasing offer for you! No down payment, redeemable at any time, and with special repayments. Address your requirements to our sales team; we'll be happy to advise you. ----Arrange a test drive and let us convince you of the quality of our vehicles. Appointments: Mon.-Fri. from 8:30 a.m. to 6:00 p.m. Sat. from 9:30 a.m. to 1:30 p.m. ----Visit us at We look forward to your visit! ----Subject to errors and changes. The equipment offered online is not part of the contract. The equipment must be inspected on site.

Condition: used, mileage: 31,388 km, power: 160 kW (217.54 HP), first registration: 11/1992, overall weight: 12,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, emission class: euro2, Year of construction: 1992, Equipment: ABS, navigation system, M-Benz 1224 4x4 RW2 Equipment Vehicle Lrodpjvc Ntgjfx Agzsu FIN 5569873 Vehicle ID / Vehicle ID /1151324 ????? ????? ??? ????? ?? ????? Chassis / Attachments: Wheelbase: 3,600 mm * Leaf suspension * Tires: 10 R 22.5 * Tire tread remaining: Front ~90% Rear ~80% * 1x Diesel tank * Winch 60 m/13mm thick * Trailer hitch Cabin: 3-seater * 2x revolving beacons Bodywork: Metz RW2 * Kirsch Type: D20SE * Rotzler winch 60 m * Light mast 6 m * Power generator Engine / Transmission: 11,309 cc // 218hp/160kW * 5 speed * Differential lock * Power take-off Weights: Total weight: 12,000 kg * Empty weight: 8,500 kg * Payload: 3,500 kg Other: * German vehicle * Rescue saw (for metal and glass) New main inspections / safety inspections or weight downgrades/upgrades are possible on request. We are happy to help you obtain export/transfer license plates, and transferring your purchased vehicles within the Federal Republic is also possible. Contact us!----We speak the following languages: German, English, and Russian!----No liability for printing & typing errors, changes, prior sale, and mistakes excepted!----Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. Through our many years of experience in the processing and distribution of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge’s particular strength lies in the sale of new and used commercial vehicles. On 11,000 sqm², there is a wide variety of vehicles. Our company philosophy is characterized by fairness and seriousness. Because customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who accompanies them when buying or selling vehicles. See for yourself! Our service for you: Loading of vehicles We are happy to help you load your purchased vehicles. Organizing special transports We are happy to assist you with organizing special transports. Temporary/export license plates We are happy to help you obtain export/temporary license plates. Handling customs formalities We are happy to help you with customs matters.

Year of construction: 2025, condition: new, functionality: fully functional, Applications & Customer Benefits: Lrsdpsxdmhtsfx Agzeu The ASCO® Generator delivers stable, reliable power for construction sites, industrial plants, and mobile systems. Designed for demanding environments, it ensures efficiency, low maintenance, and maximum uptime for both primary and backup energy needs. Key Features: • Compact, robust twin-cylinder diesel engine • Electric start system for easy operation • Low fuel consumption (3.5 l/h) and 25 l tank • Quiet operation at 83 dBA (7 m) • Highly durable, low-maintenance design Tech Highlights: L 0.910 m · W 0.578 m · H 0.668 m · Qmax 13.75 kVA · P 15 kW · Displacement 954 cm³ · Fuel 25 L · Fuel consumption: 3.5 L/h · Weight 190 kg · Voltage 230/400 V · 50 Hz · Noise 83 dBA (7 m)

Condition: excellent (used), power: 129 kW (175.39 HP), fuel type: diesel, color: blue, first registration: 06/2018, Year of construction: 2018, operating hours: 9,650 h, General information Model year: 2019 Registration number: TTZ-87-L Serial number: 340410/5372 Technical information Number of cylinders: 4 Drive: Wheel GVW: 30.300 kg Functional Mast length: 13,7 m CE mark: yes Condition Technical condition: very good Ledpfx Ajxqrvpogzjru Visual appearance: very good Financial information Price: On request Other information Emissions class: Stage IV Additional information Please contact Ferdinand Pater for more information type. Fuchs MHL340 T4f Stock number D46 Serial number 340410/5372 New deliverd 2018 Working hours 9650 Weight 30.3 Engine Deutz 6.1 L6, 129Kw 2000Rpm Boom 13,7 meter boom configuration, Boom 7,2 and Stick 6,2 Safety check valves on boom and stick cylinders Cabin Cab system horizontally and vertically adjustable Upper carriage Standard Fuchs color, Central greasing system Under carriage All-wheel drive with differential, 2-speed powershift transmission, Stabilizer cylinders with integrated two- way check valves Lights Several (LED) lights on boom, stick and cabin Extra 13kW Generator, Rear view camera

Condition: good (used), power: 135 kW (183.55 HP), fuel type: diesel, color: green, Year of construction: 2007, operating hours: 12,287 h, Year of manufacture: 2007 Drive: Wheel Empty weight: 27.500 kg Dimensions (LxBxH): 1110 x 275 x 330 cm Technical condition: good Serial number: 825.0.1055 Please contact Ferdinand Pater for more information Stock no. D33 Lredpfjt Dlxksx Agzju Machine Brand Sennebogen Type: 825M D-series Weight: 28 Ton Serial number: 825.0.1055 Building year: 2007 Worked hours: 12287 Engine: Deutz TCD 2012 L06 2V 135kW Engine no. 10371260 Boom: K13 configuration, Boom = 7,4 m. and Stick = 5,8 m Safety check valves on boom and stick cylinders Cabin: Maxcab D270, Hydraulic Cab Riser, 2,7 m. in height. Upper carriage: Standard Sennebogen color, central greasing system Undercarriage: Mobile MP26, 4 points outrigger, 8 full rubber tires 10.00-20 Lights: Several lights on boom, stick and cabin Extra: Generator set Dimentions: LXBXH 11,10X2,75X3,30

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Ljdoxdfa Uspfx Agzoru Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), Year of construction: 1978, max. pitch circle 152 mm Number of teeth 8-50 St. weight 7500 kg Technical data Lrjdpfx Asxq Hgcogzju – Min./max. foot cone angle: 15° / 55° – Pitch circle diameter: 152 mm – Max. tooth height with 21° finished broach head: 10.7 mm – Max. tooth width at tooth root with 21°: 28 mm – Broach head diameter: 200 mm – Number of teeth range: 8–50 – Max. broach head diameter: .21" Workpiece spindle – Diameter of the tapered bore at the wide end: 99.219 mm – Clamping length at 304.8 mm: 15.478 mm – Taper depth: 15.875 mm – Diameter of the entire spindle bore: 22.225 mm

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21155 Lrsdpfow R Nn Dex Agzou Description: We have an Esab SB53 Generator Rep item for sale. The generator is being sold as a repair item as it is in unknown condition. Errors and omissions occur and some cost must be taken into account. Ready for delivery

Condition: excellent (used), Year of construction: 1977, power: 490 kW (666.21 HP), Polyma/Mercedes Benz 12-cylinder/generator set • Manufacturer: Polyma Maschinenbau Lredpow Uiivjfx Agzsu • Model: PM 2467501 • Year of manufacture: 1977 • Power: 490 KVA • Mercedes Benz 12-cylinder engine • Total weight: 15,400 kg • German machine

Condition: good (used), Ultrasonic sensor, ultrasonic sensor, ultrasonic generator, ultrasonic generator -Manufacturer: MS ULTRASONIC, ultrasonic generator soniGEN ADVANCED 35/40 Lredpfjxpfptex Agzsu -Type: 35-40 ADVANCED .: 612448.0 -Power: 1.1 kVA -Number: 12x generator available -Price: per piece -Box dimensions: 360/75/H235 mm -Weight: 6.2 kg/piece

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Lrsdpfx Ajxdfazogzsu Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Field of application: Construction Serial number: F62xxxx Please contact ATS Norway for more information Lrodswwqflopfx Agzeu Please provide reference number upon request: 20901 Specifications: Power output: 250 kVA Operating hours: 94 Voltage: 230/133 V Current: 626 A Frequency: 50 Hz Volvo TD160 engine Description:Newage Stamford generator offered on behalf of customer.Only 94 operating hoursIdeal for industrial use, backup power or construction sites.Ready for delivery.

Condition: good (used), Ultrasonic sensor, ultrasonic sensor, ultrasonic generator, ultrasonic generator -Manufacturer: MS ULTRASONIC, ultrasonic generator sonxGEN ADVANCED 20 -Type: 20 ADVANCED Lrsdpjxpfa Sjfx Agzju .: 7001480 -Power: 2.75 kVA -Number: 1x generator available -Dimensions box: 360/100/H250 mm -Weight: 8.5 kg

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Lsdpfx Agsrtrykezoru Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: good (used), Ultrasonic sensor, ultrasonic sensor, ultrasonic generator, ultrasonic generator Lrodpfoxpd Nxex Agzou -Manufacturer: MS ULTRASONIC, ultrasonic generator soniGEN ECONOMY 35 -Type: 35-40 ECONOMY .: 7001630 -Power: 1.1 kVA -Number: 2x generator available -Price: per piece -Box dimensions: 360/73/H230 mm -Weight: 6 kg/piece

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) Ljdpfx Ajxaqa Sjgzeru A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Lrjdpfx Aoruakgjgzou Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#