Used Generators for sale (13,133)

Condition: used, Year of construction: 1958, functionality: fully functional, power: 17,500 kW (23,793.35 HP), input frequency: 50 Hz, temperature: 320 °C, overall weight: 30,000 kg, rotational speed (max.): 3,000 rpm, total length: 7,000 mm, ČKD, Turbogenerator set, condensate steam turbine 17,5MW Manufacturer: ČKD Power: 17 500 kW Type: RPM: 3000/ min Steam pressure: 19 bar Output steam pressure: 18 bar Gedpfxjwqqa Ne Ah Eebw Steam temperature: 320 ºC The equipment is from year 1958 and has received all maintenance required for the maximum reliability, availability and capacity. Size: 3500 x 3500x7000mm, Weight: Generator, gearbox, oil system and all related electro and InC equipment included. We will send all technical data on request. The machine has been regularly maintained and serviced since its commissioning. The period of GO and SO was carried out according to the actual condition. The repairs were carried out by the turbine manufacturer, the reconstruction (1969) and subsequent repairs were carried out by the 1st Brno Engineering Works. GO with replacement of blades was carried out in 1986 and SO in 2005 with standard scope of work. In the last period, routine maintenance and repairs were carried out by the local maintenance of the heating plant, when the following repairs were mainly carried out: - control maintenance, oil. system, condensation - maintenance of the heat exchanger station - maintenance of valves

Condition: used, Year of construction: 1995, operating hours: 201,000 h, functionality: fully functional, pressure: 19 bar, power: 25,000 kW (33,990.50 HP), input frequency: 50 Hz, temperature: 320 °C, overall weight: 93,000 kg, rotational speed (max.): 3,000 rpm, total length: 6,200 mm, type of cooling: water, Škoda Plzeň, Turbogenerator set, condensate steam turbine 25 MW Manufacturer: Škoda Plzeň Power: 25 000 kW Type: RPM: 3000/ min Steam pressure: 19 bar Steam temperature: 320 ºC Number of Extractions:1+3 Operation hours: 201000 The equipment is from year 1995 and has received all maintenance required for the maximum reliability, availability and capacity. Size: 4 700 x 6 200 mm, Gbedpfx Ahjwqp U Ee Eew Weight: 93 000 Generator, gearbox, condenser, condenser pumps, oil system and all related electro and InC equipment included. We will send all technical data on request. The machine has been regularly maintained and serviced since its commissioning. GO and SO have been carried out at intervals of about 5 years according to the actual condition. GO was carried out by the turbine manufacturer. The last GO was carried out in 2017 for a total amount of 112.6 million CZK. The following repairs were carried out: - replacement of the old rotor with a new one, - repair of the flow section of the stator and the distributor wheels and supports, - replacement of the gearbox, - repair of the regulation, oil. Repair of the system, condensation, - installation of irrigation and new NZ, Maintenance and servicing was carried out in the years after the GO, the inspection for subsequent repair was planned for 2024 and did not take place.

Condition: used, Year of construction: 1985, functionality: fully functional, pressure: 90 bar, power: 25,000 kW (33,990.50 HP), input frequency: 50 Hz, temperature: 515 °C, overall weight: 34,000 kg, rotational speed (max.): 3,000 rpm, 1. Brněnská strojírna, Turbogenerator set, back pressure steam turbine 25MW Manufacturer: 1. Brněnská strojírna Power: 25 000 kW Type: R25-9/1,9 RPM: 3000 / min Steam pressure: 90 bar Output steam pressure: 18 bar Godpfjwqp Edex Ah Ejbw Steam temperature: 515 ºC The equipment is from year 1985 and has received all maintenance required for the maximum reliability, availability and capacity. Size: 3 000 x 3 000 x 5 100 mm Weight: 34 000 kg Generator, gearbox, oil system and all related electro and InC equipment included. We will send all technical data on request. Maintenece: The TG2 has been regularly maintained and serviced since its commissioning. GO and SO have been carried out at intervals of about 5 years according to the actual condition. The O&M was carried out by the turbine manufacturer or a specialist company in the field. The last O&M was carried out in 2010-2011 for a total amount of 47.3 million EUR. The following repairs were carried out: - repair of the rotor with new blading - repair of the stator flow section with new blading - Replacement of quick-stop and control valve blocks - repair of the control - oil revision. system, repair of pumps - revision of steam system, valves, drainage, replacement of steam hinges The last repair (SO) was carried out in 2022-2023 for a total amount of 22 mil. The following repairs were carried out: - inspection of the flow section of the turbine, cleaning, replacement of seals, balancing of the rotor - oil revision and cleaning. system, revision of oil pumps, new radiator tubes - revision and repair of the turbine control and the control safety system - inspection of steam pipes and valves Regular maintenance and servicing was carried out during operation.

Condition: used, Year of construction: 1994, functionality: fully functional, pressure: 90 bar, power: 25 kW (33.99 HP), input frequency: 50 Hz, type of input current: AC, temperature: 515 °C, overall weight: 34,000 kg, total height: 5,000 mm, rotational speed (max.): 3,000 rpm, type of cooling: water, 1. Brněnská strojírna, Turbogenerator set, back pressure steam turbine 25MW Manufacturer: 1. Brněnská strojírna Power: 25 000 kW Type: R25-B1 RPM: 3000 / min Steam pressure: 90 bar Output steam pressure: 18 bar Steam temperature: 515 ºC Number of extractions: 1 The equipment is from year 1994 and has received all maintenance required for the maximum reliability, availability and capacity. Gedpfxewqqd Uj Ah Eobw Size: 3 000 x 3 000 x 5 100 mm Transformator: DTK 25; 25 kVA; 6000/400 V; 2,41 A/36,1 A; Ua = 3,7%; Yz1; IP00; v.č. 1051031 Weight: 34 000 kg Generator, gearbox, oil system and all related electro and InC equipment included. We will send all technical data on request.

Condition: used, Year of construction: 1985, functionality: fully functional, pressure: 90 bar, power: 25 kW (33.99 HP), input frequency: 50 Hz, type of input current: AC, temperature: 515 °C, overall weight: 45,000 kg, total height: 5,000 mm, rotational speed (max.): 3,000 rpm, type of cooling: water, 1. Brněnská strojírna, Turbogenerator set, back pressure steam turbine 25MW Manufacturer: 1. Brněnská strojírna Power: 25 000 kW Type: R25-9/1,9 RPM: 3000 / min Steam pressure: 90 bar Output steam pressure: 18 bar Steam temperature: 515 ºC The equipment is from year 1985 and has received all maintenance required for the maximum reliability, availability and capacity. Size: 3 000 x 3 000 x 5 100 mm Weight: 45 000 kg Generator, gearbox, oil system and all related electro and InC equipment included. Gbedswqp Acspfx Ah Ejw We will send all technical data on request. Maintenece: The machine has been regularly maintained and serviced since its commissioning. GO and SO have been carried out at intervals of about 5 years according to the actual condition. The O&M was carried out by the turbine manufacturer or a specialist company in the field. The last O&M was carried out in 2007 for a total amount of 44.2 million EUR. The following repairs were carried out: - repair of the rotor with new blading - repair of the stator flow section with new blading - Replacement of quick-action and control valve blocks - replacement of the control gear on the machine, - reconstruction of the control system - repair of oil. system, - revision of steam system, valves, drainage The last repair (SO) was carried out in 2020 for a total amount of 16.2 million CZK. The following repairs were carried out: - revision of the flow section of the turbine, cleaning, replacement of seals, rotor balancing - oil revision and cleaning. Revision of the rotor, cleaning of the rotor, revision of the rotor system, installation of full flow filtration - complete repair of the KUP with repiping, - revision and repair of the turbine control and the control safety system - inspection of steam pipelines and valves Regular maintenance and servicing was carried out during operation, with further periodic repairs planned for 2027.

Condition: new, Year of construction: 2022, Multiple available! Brand Daewoo Model: DDAE10500DSE-3G Gbsdpfeiv Hf Njx Ah Ejw Year of manufacture: 2022, New Capacity (KvA) 8,1 kVa (230v) / 7,5 kVa (400v) Motor brand Daewoo Engine model 500 Capacity engine (Kw) 15 Hp Fuel Diesel Voltage 230-400 Frequency (Hz) 50 Dimensions LxWxH (mm) 880 x 560 x 720 Weight (Kg) ca 165 Number of pieces in stock 100+ Comments Max power: 8.1 kVA (400 V) 7.3 kVA (230 V) Rated power: 7.5 kVA (400 V) 6.7 kVA (230 V) Engine Power: 15hp Displacement: 498 cc Fuel tank capacity: 15 L Oil tank capacity: 1.65 L Run time 50% load: 12 hrs Power factor: 1.25 Socket: 1 x 16 A - 1 x 32 A Output 12V: ✓ Battery: 36 AH Noise level at 7M: 72 - 74 dBA Net weight: 165 kg Dimensions: 880 x 560 x 720

Year of construction: 2023, condition: new, Damatt brand Gbjdpjltmdfsfx Ah Eew Model: CA-30 Year of manufacture: Unused, 2023 Serial number: On request Capacity (KvA) 37,5 prime / 41 standby Capacity (Kw) 30 prime / 33 standby Engine model K4100D Fuel Diesel Alternator model STC-30 Voltage 400 Frequency (Hz) 50 RPM 1500 Amperes (A) 54,1 Dimensions LxWxH (mm) 2200 x 850 x 1120 Weight (Kg) ca 730 Number of pieces in stock 15 Made in China Comments Unused soundproofed diesel generator, Wisdongen genset controller

Year of construction: 2023, condition: new, Brand Kawakenki Model: KK70-III-SSS Year of manufacture: Unused, 2023 Serial number: On request Capacity (KvA) 70 Engine model N4105ZLD Capacity engine (Kw) 66 Fuel Diesel Alternator model STC-70 Voltage 230-400 Frequency (Hz) 50 RPM 1500 Amperes (A) 101 Dimensions LxWxH (mm) 2150 x 880 x 1150 Weight (Kg) ca 880 Number of pieces in stock 2 Made in China Comments Unused soundproofed diesel generator, M.AQUA genset controller Gbodpfx Ahsltmghj Esw

Year of construction: 2023, condition: new, Brand Bauer Model: GF-24KW Year of manufacture: Unused, 2023 Serial number: On request Capacity (KvA) 30 Capacity (Kw) 24 Engine model ZH4100D Fuel Diesel Alternator model YHG-24KW Voltage 400 Frequency (Hz) 50 RPM 1500 Amperes (A) 43,3 Dimensions LxWxH (mm) 1600 x 760 x 1650 Weight (Kg) ca 600 Number of pieces in stock 2 Made in China Gsdpfx Aoltml Aeh Eobw Comments Unused open skid diesel generator, Smartgen genset controller

Year of construction: 2023, condition: new, Brand Kawakenki Model: KK70-III-SSS Year of manufacture: Unused, 2023 Serial number: On request Capacity (KvA) 70 Engine model N4105ZLD Capacity engine (Kw) 66 Fuel Diesel Alternator model STC-70 Voltage 230 - 400 Frequency (Hz) 50 RPM 1500 Amperes (A) 101 Dimensions LxWxH (mm) 2150 x 880 x 1150 Weight (Kg) ca 880 Number of pieces in stock 3 Gbsdoltmfyepfx Ah Ejw Made in China Comments Unused soundproofed diesel generator, M.AQUA genset controller

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 532.323/10-0, total height: 6,454 mm, total width: 6,810 mm, total length: 2,810 mm, load capacity per storage section: 180 kg, load capacity: 40,000 kg, A set of 2 Hänel Lean Lifts in a linked lift system is being auctioned here! Machine numbers: 532.323/10-0*1 & 532.323/10-0*2 Exact model designation: Hänel Lean Lift 3060-825/281/340/75/180/40HS Gedoxr Ng Uspfx Ah Eobw TECHNICAL DETAILS Load capacities (each) Max. container load: 180 kg Max. number of containers: 163 Max. total load: 40,000 kg per Lean Lift (deduct container weight) Access point 1 (front side) Clear opening height: 880 mm Access height: 890 mm (standard height) Access point height to operator’s floor: 890 mm LED lighting: yes Manual sliding door: yes Light curtain: yes Access point: Optoelectronic identification system (28-fold) for precise measurement of goods height Drive and travel speed Vertical speed without container: max. 1.83 m/s Vertical speed with container: max. 0.95 m/s Horizontal speed: max. 0.5 m/s Connection: 400 V / 20 A at 50 Hz Lift capacity: 5 kW Vertical motor power: 4 kW Horizontal motor power: 0.37 kW Lift control Controller type: MP 14 N-H TFT Display: Touch display with integrated alphanumeric keypad and function key block USB interfaces: 1 Serial interfaces (RS-232): 2 Ethernet interface: available, for HOST integration (communication with any ERP system) Protocol: SOAP protocol Operating mode: HostWebSOAP for warehouse management in WMS Display language: German (DE) Additional memory card: included, for S-Version (standalone) Module 00 - remote-controlled lift operation Safety equipment: special protective equipment required for remote control outside the field of view MACHINE DETAILS Unit height: 6,454 mm Unit width per system/total: 3,405 / 6,810 mm Unit depth: 2,810 mm Net weight without containers per system: 4,371 kg Container empty weight per system: 2,275 kg Electrical data Phases: 3 Frequency: 50 Hz Voltage: 400 V Current consumption: 10.2 A Minimum cable cross-section of power supply: 2.5 mm² at 9.6 A Maximum fuse rating of power supply: 20 A / 400 V Colour: Pearl grey EQUIPMENT - Hänel Pick-o-Light-Vario (2-axis movable LED light field for colour-marking the requested item) - Height sensors for automatic fill height recognition and height-optimized storage - Hänel slot wall: 131 usable shelf profiles, slot profile 75 mm, container usable heights: 55 - 730 mm in 25 mm increments - High-Speed Generation for increased vertical and horizontal travel speeds - ESB Package: Redundancy system consisting of 8 integrated safety circuits + 2nd safety circuit

Condition: good (used), Year of construction: 2001, Equipped with: Power Stock Fanuc 5-Axis CNC Control 160M 400mm Honing Wheel X Axis Pulse Generator Coolant System w/Twin Filters Magnetic Chip Separator Honing Tool Set up for Last Job is Still in Machine Internal Diameter of Honing Tool on Machine is 14" Work Light Power Door Auto Dress 5-Part Program Instruction Book for 16M Control Instruction Book for Set-Up and Operation Specifications: Maximum Outer Diameter: 250 (350) Minimum Outer Diameter: 30 Maximum Overall Length: 400mm Maximum Tooth Width: 45mm Module: 1.0-3.0 Cross Feed Device(Z Axis): 430mm Max. Travel Honing Wheel Cutting Feed Device(X Axis): 370 Max. Travel Honing Wheel Swing Device(C Axis): Swing Angle: +30 Degress Honing Wheel Rotation Drive Device(A Axis): Honing Wheel Spindle Speed R/Min: 500 Honing Wheel Outer Dia.: 300 (400) Maximum Honing Wheel Width: 50mm Crowning Device (Y Axis): Maximum Rocking Angle: 1.6 Degrees Motor Types: Z-Axis Drive Motor: 1.8Kw X-Axis Drive Motor: 1.8Kw Y-Axis Drive Motor: 0.7Kw C-Axis Drive Motor: 1.8Kw A-Axis Drive Motor: 2.2/3.7Kw Gbjdpjrualpofx Ah Eow Maximum Distance Between Centers: 600mm Center Height: 1,100mm Floor Space: 2,170W X 2,800D X 2,100H Mass Of Machine: 4,500Kg

Year of construction: 2009, condition: ready for operation (used), General Data Measurements width 1879,6 mm Measurements depth 2743.2 mm Measurements height 1905 mm Machine weight 11000 kg Control Unit Brand MAZATROL Main Drive Spindle speed range 4000 RPM Spindle motor power 35 HP Spindle bore 76.2 mm Number of axis 2 Movement X-Axis Movement 177,8 mm Z-Axis Movement 558,8 mm Workpiece Workpiece drm over bed 6731 mm Turret Gjdoxirhvspfx Ah Esbw Number of turrets 1 Tools Number of station 12 This Mazak QTN 250-II was manufactured in 2009. A robust horizontal turning machine, it offers reliable performance for precision machining. Ideal for those looking to enhance their machining capabilities with a proven model. Contact us for more information. Application Types Turning

Condition: used, machine/vehicle number: F62xxxx, Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 20901 Specifications: Gbedpswwqflsfx Ah Eew Power output: 250 kVA Operating hours: 94 Voltage: 230/133 V Current: 626 A Frequency: 50 Hz Volvo TD160 engine Description:Newage Stamford generator offered on behalf of customer.Only 94 operating hoursIdeal for industrial use, backup power or construction sites.Ready for delivery.

Condition: used, Little used 11.6 MW Condensing Steam Turbine Generator, TGM Kanis Turbinen GmbH, 2017 Reported to have less than 100 operating hours due to project cancellation. Includes turbine, synchronous generator, auxiliaries, and controls. Turbine Manufacturer: TGM Kanis Turbinen (Germany) Type: CT32-54 Condensing Steam Turbine Year: 2017 Live Steam Conditions: 43 bar @ 398 °C Exhaust Conditions: 0.064 bar @ 38 °C Power Output: Max continuous 11,615 kW Speed: 7,200 rpm Generator Manufacturer: Elin Motoren Type: HTM290E04, synchronous generator Rating: 14,631 kVA Voltage: 11,000 V Current: 768 A Frequency: 50 Hz Enclosure: IP54 Weight: 30,600 kg Year: 2017 Auxiliaries Gbjdpfjxvq Nrex Ah Ejw Voith Turbo I/P Converter Type: DSG-B07143 Supply voltage: +24 VDC Input pressure: 8 bar Output pressure: 2–5 bar Sirocco Cooling System Type: 2x16 KDL-E-50-2-1850-2-1.8 Motor power: 253 kW Air flow: 29,664 m³/h (65/35 °C, 2x0.065 kPa) Water flow: 2×25 m³/h (25/29 °C, 10 kPa) Pressure: 10–15 bar Controls Turbine control system included. Turbine was intended to be fed by boiler (not included in sale) with steam production capacity of 52570 kg/hour.

Condition: used, Year of construction: 2015, HAAS SUPER MINI MILL VERTICAL MACHINING CENTRE MAKE HAAS, MADE IN USA MODEL SUPER MINI MILL YEAR 2015 CONTROL HAAS NEXT GENERATION TABLE SIZE 914.0 mm x 305.0 mm TRAVERSES (XYZ) X AXIS: 406.0 mm Y AXIS: 305.0 mm Godpfjxfazpex Ah Ejbw Z AXIS: 254.0 mm SPINDLE SPEED 10,000 RPM SPINDLE TAPER BT 40 ATC 10 PLUS HIGH SPEED SPINDLE COOLANT SYSTEM SPINDLE TOOLING FULL SET OF MANUALS FULLY FUNCTIONAL ONE PREVIOUS OWNER

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Gedjxdfa Uspfx Ah Eebw Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: ready for operation (used), Year of construction: 2010, General Data Measurements width 2700 mm Measurements depth 5700 mm Measurements height 2100 mm Machine weight 7950 kg Control Unit Brand SIEMENS Model SINUMERIK 840D solution line with ERGOline control and ShopTurn, operating system Windows Main Drive Spindle speed range 5000 Spindle bore 87 mm Number of axis 5 Movement X-Axis Rapid Traverse 30 m/min Y-Axis Rapid Traverse 30 m/min Z-Axis Rapid Traverse 30 m/min Tail Stock Godpfxexbumrj Ah Esbw Pinol tool taper MT 5 Tools Max weight 7 kg Max tool diameter 80 This 5-axis DMG CTX Beta 1250 TC turn-mill centre was manufactured in 2010. It features a swing diameter of 500 mm, max turning diameter of 390 mm, and a turning length of 1250 mm. The spindle supports up to 5000 RPM and 34 kW power, complemented by a 24-position tool magazine. Ideal for complex machining tasks, consider the opportunity to buy this DMG CTX Beta 1250 TC turn-mill centre. Contact us for more information about this machine. Application Types Turning

Condition: used, mileage: 100,000 km, Year of construction: 2022, Serial number: YS2R6X4000566xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21747 Truck specifications: EU-approved until 05.08.2026 Model year: 2022 Mileage: approx. 100,000 km Automatic transmission Latest generation Scania gearbox Full air suspension Tires (see photos) Gbodsxvla Eopfx Ah Eew Retarder Tandem lift Hydraulic cover Euro 6 Length: 791 cm Width: 255 cm Wheelbase: 335/135 cm Curb weight: 13,700 kg Drive: 6x4 Power: 660 hp Trailer coupling Reversing camera Sleeper bed Refrigerator Radio/CD Air conditioning Trailer specifications: EU-approved until 05.08.2026 Model year: 2005 Tires (see photos) Length: 950 cm Width: 255 cm Curb weight: 6440 kg Description:Scania R660 6x4 asphalt truck from 2022 with tandem lift.Equipped with the latest Scania gearbox.Both truck and trailer are EU-approved until August 2026.Delivery by agreement. Km: 100000 HK: 659 Technical approved: Yes EU-approved until: 05.08.2026 Own weight: 13700 Total Weight: 35000 Payload: 21225 Width: 255 Length: 791,2 Euro: 6 Model: R660 6X4 Asfaltbil m/ Carnehl asfaltkjerre Gearbox: Automatic

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Gbodpfsxdfazox Ah Ejw Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: ready for operation (used), Year of construction: 2013, General Data Machine weight 12020 kg Control Unit Brand MAZATROL Movement X-Axis Movement 203.2 Y-Axis Movement 70.10 Z-Axis Movement 71.8 Gsdpfx Ajwfuqujh Eobw Additional Equipment Tool Taper: CAT#40 / Automatic Tool Changer (ATC): 48 tools This 3-axis Mazak VCN 700E/40-II vertical machining center was manufactured in 2013. Ideal for precision engineering, it offers robust construction and reliable performance. Consider the opportunity to buy this Mazak VCN 700E/40-II vertical machining center. Contact us for more information. Application Types Milling

Condition: good (used), overall weight: 10,364 kg, Year of construction: 2019, 2019 GENERAL BROACH 10-30 GBTU VERTICAL TABLE UP BROACH Equipped with: Retriever Shuttle Table Gjdpfx Aortrzaoh Eobw Chip Conveyor Auto Load Grayco Lube AB Panelview Coolant Tank & Pump Specifications: Capacity: 10 Ton Stroke: 30" Table Up 1″ Puller / Retriever Hydraulic Power Unit Chip Conveyor Machine Dimensions (approx.): 165″ x 48″ x 60″ Machine Weight Total (approx.): 22,800 lbs. Machine Column (approx.) : 13,000 lbs. Base w/ Chip Conveyor (approx.): 4,700 lbs. Electrical Panel (approx.): 600 lbs. Hydraulic Power Unit (approx.): 4,500 lbs.

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Godpfjrtrykex Ah Ejbw Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Gbsdpfexaqa Ssx Ah Ejw Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Godpfxeruakgo Ah Eobw Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#