Used Combustion for sale (229)

Condition: used, Large Gas-Fired Furnaces for Sale: 7500 long x 2780 wide x 2000 height. Pjdpfxsvitnhj Ab Ujpp These are Internal - bed sizes Gas fired Eurotherm Control 4102. Will heat up steel to 1000 degrees C plus. Both installed and working order. Spares available including a controller and thermocouples.

Condition: good (used), Year of construction: 1999, thermal exhaust air combustion system, exhaust gas filter system, exhaust gas filter system, exhaust gas filter, hot filter, industrial exhaust gas filter -Thermal exhaust air combustion plant: Manufacturer LTG Type 20000 Nm³/h -Protocols: regarding maintenance and emissions are available Documentation: complete -Combustion chamber temperature: 850° C Ppedpfxjvtzdle Ab Ujp -Heating fuel: Natural gas -Calorific value: 10 kWh/m³ -Connected load: 45 kW -Exhaust air volume: 20,000 Nm³/h -Max. solvent quantity: 1.5 g/m³ -Individual components: see photos

Condition: good (used), switchgear, control, UV light, firing system -Type: Honeywell EC7850 A 1122 -Price: per piece -Quantity: 5 pieces -Dimensions: 130/135/H145 mm -Weight: 1.3 kg Ppjdpfx Aed Iy Nqjb Ujp

Condition: new, functionality: fully functional, Year of construction: 2026, Internal combustion forklift truck with a 2,500 kg load capacity Design and technology The forklift’s construction is made of high-strength materials, resistant to intensive use and outdoor conditions. The reinforced frame and high-rigidity mast ensure stability during lifting and transport operations. The Nissan K25 engine with an output of 50 HP is a well-established unit in the forklift industry, offering strong tractive force, durability, and excellent availability of spare parts. The Power Shift automatic transmission allows dynamic acceleration and smooth direction changes without loss of torque. In addition, the use of hydraulic brakes and support systems enhances operational safety and user comfort. Precision and operational efficiency The mast is equipped with a forward/backward tilt function (angle 6° / 12°), enabling safe and precise handling of loads in various working conditions. The side-shift function significantly reduces operating time by allowing fork position adjustments without repositioning the entire truck. Thanks to pneumatic tires with deep tread and high ground clearance, the forklift performs exceptionally well on uneven terrain, ramps, and loading yards. A travel speed of up to 19 km/h unloaded enables fast execution of handling and transport tasks over large areas. Standard equipment Nissan K25 internal combustion engine Power Shift automatic transmission Tilting mast Side-shift forks Complete work and warning lighting Reverse alarm, strobe light, turn signals 1,220 mm forks with manual spacing adjustment Choose a proven solution for internal logistics. Select the CORMak 2,500 kg forklift with the Nissan K25 engine and Power Shift transmission—contact our technical advisor or order directly online. Technical specifications Load capacity: 2,500 kg Maximum lift height: 3,000 mm Side shift: Yes Mast tilt: Yes Engine: Nissan K25 Engine power: 50 HP Transmission: Automatic (Power Shift) Travel speed (loaded / unloaded): 17 / 19 km/h Tire type: Pneumatic Overall length: 3,800 mm (L) Overall length without forks: 2,580 mm (L’) Wheelbase: 1,600 mm (L1) Distance from front axle to fork face: 469 mm (L2) Fork length: 1,220 mm (L4) Single fork width: 120 mm (W) Overall width: 1,160 mm (W1) Rear width: 970 mm (W2) Fork carriage width: 970 mm (W3) Outside fork spread: 1,024 mm (W5) Maximum lifting height: 3,000 mm (H) Overall mast height (lowered): 2,000 mm (H1) Overall mast height (raised): 4,250 mm (H2) Fork height above ground: 150 mm (H3) Overall height to overhead guard: 2,070 mm (H4) Mast ground clearance: 110 mm (H5) Ground clearance: 110 mm (H6) Load center distance: 500 mm (C) Rated capacity: 2,500 kg (Q) Fork thickness: 40 mm (T) Mast tilt angle (forward): 6% (α) Mast tilt angle (backward): 12% (β) Ppedpfx Abeycv A Eo Usp Weight: 3,680 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Electric forklift truck with a 2,500 kg load capacity and 4,500 mm lifting height Design and technology The forklift is equipped with a modern electric drive that ensures quiet and emission-free operation. The power system is based on a high-performance 48V 490Ah battery, providing up to 10 hours of continuous operation. Compared to lithium-ion batteries, this battery offers up to 40% greater safety—it is resistant to mechanical damage, overheating, and does not emit harmful gases. A stable structure, precise hydraulic system, and a mast made of high-grade steel allow safe handling of loads at full capacity and maximum lift height. The forklift features a soft start system, power steering, and automatic speed reduction while turning, improving machine control and enhancing operator safety. Precision and operational efficiency The side-shift function allows fork position correction without the need to reposition the entire truck. Forward and backward mast tilt enables precise load placement and stable transport. A travel speed of up to 14 km/h and an optimized turning radius of 2172 mm make the forklift highly effective in narrow warehouse aisles. Applications This model is ideal for use in: high-bay warehouses and distribution centers, production plants with high material throughput, industries requiring clean, emission-free operation (food, pharmaceutical, chemical), outdoor loading areas – thanks to pneumatic tires and high ground clearance. Standard equipment Integrated 48V 490Ah battery 70A battery charger Side shift system (lateral fork movement) Tilting mast Full LED work and warning lighting Pjdpoycvxyefx Ab Uepp Pneumatic tires with deep tread Audible warning system, turn signals, warning beacon, reverse alarm Technical specifications Load capacity: 2,500 kg Maximum lift height: 4,500 mm Fork length: 1,220 mm Side shift: Yes Mast tilt: Yes Battery voltage / rated capacity: 48V / 490Ah Continuous operating time on full charge: up to 10 h Charging time: 10 h Travel speed (loaded / unloaded): 12 / 14 km/h Tire type: Pneumatic Overall length: 3,573 mm (L) Overall length without forks: 2,353 mm (L’) Wheelbase: 1,480 mm (L1) Distance from front axle to fork face: 468 mm (L2) Fork length: 1,220 mm (L4) Single fork width: 120 mm (W) Overall width: 1,170 mm (W1) Rear width: 950 mm (W2) Fork carriage width: 970 mm (W3) Outside fork spread: 1,038 mm (W5) Maximum lifting height: 4,500 mm (H) Overall mast height (lowered): 1,995 mm (H1) Overall mast height (raised): 5,750 mm (H2) Fork height above ground: 150 mm (H3) Overall height to overhead guard: 2,098 mm (H4) Mast ground clearance: 110 mm (H5) Minimum ground clearance: 105 mm (H6) Load center distance: 500 mm (C) Rated capacity: 2,500 kg (Q) Fork thickness: 40 mm (T) Turning radius: 2,172 mm (r) Mast tilt angle (forward): 6% (α) Mast tilt angle (backward): 12% (β) Weight: 4,015 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Internal combustion forklift truck with a 3,500 kg lifting capacity Design and technology The forklift is equipped with reinforced load-bearing components, a durable frame, and a hydraulic system designed to operate under maximum load. The Nissan K25 engine is a proven power unit known for its high overload resistance and low fuel consumption. The Power Shift automatic transmission ensures smooth driving, increasing operator comfort and safety, especially during frequent direction changes. Pneumatic tires with increased diameter and deep tread perform exceptionally well on ramps, loading yards, and both paved and unpaved surfaces, effectively absorbing vibrations and reducing suspension wear. Precision and operational efficiency The side-shift mechanism allows horizontal fork movement, significantly reducing cycle time during storage and unloading operations. Manual fork spacing adjustment enables quick adaptation to different pallet sizes. Forward and backward mast tilt improves safety when handling heavy loads, facilitating precise placement and stabilizing the load during travel. Standard equipment Nissan K25 engine Side shift – lateral fork movement Mast tilt adjustment (forward/backward) Manual fork spacing adjustment Pneumatic tires LED work lights Reverse alarm and warning lights Technical data Load capacity: 3,500 kg Lift height: 3,000 mm Fork height (lowered): 40 mm Fork length: 1,220 mm Side shift: Yes Mast tilt: Yes Engine: Nissan K25 Engine power: 50 HP Transmission: Automatic Travel speed (loaded/unloaded): 12 / 13 km/h Tire type: Pneumatic Overall length: 3,800 mm (L) Overall length without forks: 2,580 mm (L’) Pjdpfeycvv Sex Ab Uepp Wheelbase: 1,740 mm (L1) Distance from front axle to fork face: 487 mm (L2) Fork length: 1,220 mm (L4) Single fork width: 120 mm (W) Overall width: 1,225 mm (W1) Rear width: 970 mm (W2) Fork carriage width: 1,000 mm (W3) Outside fork spread: 1,060 mm (W5) Maximum lifting height: 3,000 mm (H) Overall mast height (lowered): 2,120 mm (H1) Overall mast height (raised): 4,250 mm (H2) Fork height above ground: 150 mm (H3) Overall height to overhead guard: 2,090 mm (H4) Mast ground clearance: 120 mm (H5) Ground clearance: 120 mm (H6) Load center distance: 500 mm (C) Rated capacity: 3,500 kg (Q) Single fork thickness: 40 mm (T) Mast tilt angle (forward): 6% (α) Mast tilt angle (backward): 12% (β) Weight: 4,700 kg

Condition: used, Year of construction: 2020, operating hours: 24,259 h, functionality: limited functionality, machine/vehicle number: 7633193000003100, power: 216 kW (293.68 HP), overall weight: 4,500 kg, total width: 1,900 mm, total length: 6,000 mm, total height: 1,700 mm, type of input current: three-phase, pressure: 6 bar, control cabinet height: 1,600 mm, control cabinet length: 400 mm, control cabinet width: 1,000 mm, temperature: 100 °C, operating pressure: 6 bar, Equipment: hot water, type plate available, For sale: Viessmann Vitoflex 300-UF Wood Chip Heating System (2020) – 216 to 720 kW. Highly efficient wood chip heating system for industrial applications with exceptionally low emissions. Ideal for agricultural operations, industrial heating systems, or municipal district heating and local heating networks. The complete system includes: • Fine dust filter for ultra-low-emission combustion (Schräder exhaust gas technology Nat E-Filterbax-4-D300) • Automatic fuel feeding system • Control cabinet and control unit • Professionally maintained – excellent condition Technical specifications: • Manufacturer: Viessmann • Model: Vitoflex 300-UF • Output: 216 – 720 kW • Year of manufacture: 2020 • Operating hours: approx. 6,000 – 8,000 h (mainly operated during winter months) • Fuel: Wood chips Additional information: • Complete technical documentation and maintenance records available upon request • Dismantling and transport can be arranged by agreement Ppodpjxvb Tbefx Ab Uep • Used system, sale as seen, without warranty Location: Netherlands Viewing by appointment possible.

Condition: good (used), Year of construction: 2017, Gasoline-powered high-pressure cleaner in tubular frame. Extremely robust. Ideal for construction sites where there is no electricity yet. 100% ready for use. High quality Honda engine. High pressure hose and blasting unit in top condition. Shipping within Germany possible. Transport costs about 110.-€ plus VAT. The device can be visited at any time and tried on site. Technical data: Ppodsk Dz R Tepfx Ab Uop Pressure: 150bar Delivery rate: 650 liters / hour weight: 39,5kg more info's in the attached data sheet

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 197 h, machine/vehicle number: 1825, load capacity: 200 kg, lifting height: 16,800 mm, overall weight: 2,000 kg, next inspection (TÜV): 03/2027, fuel type: diesel, tire condition: 100 %, drive condition: 100 %, color: white, Equipment: UVV, Net price: EUR 49,000.00 Gross price incl. 19% VAT: EUR 58,310.00 VAT is itemized, price negotiable, trailer not included Ppsdpfsyxr Ikox Ab Uep Manufacturer: CTE S.p.A. Model: TRACCESS 170 Serial number: 1825 Year of manufacture: 2022/06 Operating hours: 197h Max. working height: 16.80 m Platform floor height: 14.80 m Max. lateral outreach: 7.00 m Basket: Aluminium Max. basket load: 200 kg Control: Electric/Proportional Weight: approx. 2,000 kg This used CTE TRACCESS 170 is in as-new condition and has only 197 operating hours. All functions are flawless and operate as intended. The machine is equipped with a combustion engine and a 230V electric motor. The crawler undercarriage can be hydraulically adjusted. The machine can, of course, be inspected and tested by prior arrangement. Transport can be organized on request and at an additional charge. The machine is sold with a new UVV (Accident Prevention Regulation) inspection certificate. Disclaimer / Terms of Sale (B2B) The sale is made exclusively to businesses within the meaning of § 14 BGB, not to consumers. The offered machine is used and sold under exclusion of any liability for material defects. Liability for material defects is – as far as legally permissible – completely excluded. Information on condition, year of manufacture, operating hours, technical data, and usability serve only for general description and do not constitute guaranteed properties or warranties. Inspection and testing of the machine prior to purchase is expressly recommended. Upon completion of the purchase, the machine is deemed to have been inspected and approved. The following are exempt from the exclusion of liability: Claims for damages resulting from injury to life, body or health; damages based on intentional or grossly negligent breach of duty by the seller as well as claims under the Product Liability Act. Interim sale, errors and changes reserved. Jurisdiction – as far as legally permissible – is the registered office of the seller.

Condition: used, Gas heated double chamber furnace type: KA_GB 10.14.14/d heating: natural gas usable dimensions per chamber width: 1.000 mm height: 1.400 mm depth: 1.400 mm max. temperature: 550°C working temperature: 250 – 550°C uniformity: ±5 K total connected load: 15 kVA hot gas circulator power: 2 x 5,5 kW (1470 min-1) combustion air blower power: 1 x 1.5 kW (5520 rpm at 95 Hz) burner output: 2 x 100 kW (expandable to max. 2 x 150 kW) number of control groups: 2 Ppjdpfedyvipsx Ab Uop

Condition: good (used), Dust collector, extractor, self-cleaning vacuum filter, absorber, dust collector for extraction of graphite dust, metal dust, mineral dust, hard fibers, combustible, hazardous, toxic substances and effective collection of process dust, sandblasting, sodding, grinding, polishing and all kinds of dry dust. The dust extractor has explosion class ST1 and ST2 The vacuum fan is located behind the filter on the clean side which reduces the risk of explosion to a minimum. Pocket filter insert - multi-pocket 11 Kw fan in sound absorbing housing Capacity 3500m3/h Negative pressure 7000 Pa Filtration area 24 m2 Automatic filter cleaning by electric motor. Ppodpfxsg Rhfbo Ab Uep The extractor has been working on graphite processing.

Condition: new, The ZSH chipper series is specifically designed for forestry, horticulture, and municipal operations. These chippers are primarily used for volume reduction of tree and shrub cuttings as well as smaller trunk diameters. The produced wood chips are suitable for combustion in wood chip heating systems with screw conveyors or as a pre-stage in pellet production. The machines are robust, reliable, easy to operate, powerful, and produce wood chips of consistent quality and uniform size. Other features Podpfx Asyr Tkfjb Uopp Cost-effective solution for wood chip production | Compact design | User-friendly | Low energy consumption

Condition: new, The cost-effective single-shaft shredders of the ZWS series enable the realization of a wide range of size reduction tasks, such as a preliminary stage for subsequent briquetting, the production of wood chips for combustion, or re-introduction into the particleboard industry. Depending on throughput and material, the machines can be customized to meet specific requirements. Ppodpfx Abeyr I Ilo Uep Typical material for shredding includes: - Large panel and board offcuts - Wooden pallets - Waste from joinery workshops - Packaging wood - Construction and demolition timber - Veneers, MDF, and particleboard

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: KOG 130, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 150 kW (203.94 HP), continuous power: 130 kW (176.75 HP), rotational speed (max.): 1,500 rpm, motor manufacturer: MAN, type of cooling: water, A cogeneration plant on wood biomass KOG130_00 with equipment was designed to convert solid fuel into gaseous fuel. In the process, the produced gas is cleaned and cooled, after which it is forwarded to the internal combustion engine of the cogeneration plant. Podpfx Aoywgp Hsb Ujpp For solid fuel, natural wood chips of class G50-G100 are used. CHP line is equipped with containerized MAN UPB -L-W-E3262E302 Woodgas genset.

Year of construction: 2023, condition: new, SAMMET On/Off Damper 1000×500 mm Rectangular Section Industrial Damper – SAMMET® On/Off Damper Equipment designed for binary control (open/close) of air or process gas flow in high-demand industrial installations (power plants, FGD, incineration, dedusting, hot process, isolation systems). Manufacturer: SAMMET Dampers Oy (Finland) Model: On/Off Damper Serial number: 23012‑2129534 Year of manufacture: June 2023 Compliance: CE – Full nameplate present Nominal section (rectangular DN): 1000 × 500 mm Total weight: 164 kg (reinforced steel structure) Construction: welded steel frame, industrial-grade sheet metal, peripheral flange Actuation type: Mechanical On/Off with installed actuator Blade type: Reinforced rectangular blade (central shaft) Closing method: Full shut-off (shut-off type) Main material: Industrial painted carbon steel Sealing: Standard design for air/gas isolation (not 100% gas-tight) Pedpfx Abeyhxmzo Uspp This damper is particularly suitable for installations requiring reliable on/off isolation, such as: - Hot air or gas circuits - Combustion or incineration plants - Dedusting / filtration / FGD systems

Condition: used, Complete pellet production line with a maximum capacity of up to 5 tons per hour (limited by dryer capacity). Pellet Presses (3 units): CPM 7122 CPM 7922-2 CPM 7930-4 (only ~200 working hours) Hammer Mills (3 units): Maier hammer mill for wet material Maier hammer mill for dry material Kamas hammer mill (for burner material production) Cooling System: CPM pellet cooler Additional Information: Electrical and control systems are fully integrated into container units Production line has been in operation for approximately 2 years Belt conveyor, reception hopper 4 kW Dryer: distributor reception hopper 2,2 kW Conveyor belt, reception hopper 2,2 kW Worm conveyor for drum dryer 2,2 kW Drum dryer 7,5 kW Main cyclone 90 kW Sluice head cyclone 7,5 kW Fan cyclone 18,5 kW 1 Sluice cyclone 1 2,2 kW Sluice cyclone 2 0,55 kW Sluice cyclone 3 0,55 kW Worm conveyor for cyclones 1-3 3 kW Hammer mill – Maier 160 kW Hammar mill for dust burner – Kamas 110 kW Hammar mill for woodchips – Maier 132 kW Worm screw for elevator 4 kW Elevator for buffer pocket 7,5 kW Buffer pocket high/low 8/4,5 kW Scraper conveyor for the presses 2,2 kW Worm screw for dust mill 2,2 kW Press 1 CPM: Model: 7122 Main engine 160 kW Cascade mixer 7,5 kW Feeding screw 2,2 kW Oil lubrication 1,5 kW Grease lubrication 0,18 kW Press 2 CPM: Model: 7922-2 Main engine 250 kW 200 kW Cascade mixer 7,5 kW Feeding screw, frequency converted 2,2 kW Oil lubrication 1,5 kW Feeding screw 4 kW Press 3 CPM: Model: 7930-4 Work only 200 hours Main engine 250 kW Cascade mixer 7,5 kW Feeding screw 2,2 kW Oil lubrication 1,5 kW Oil cooler 2,2 kW Grease lubrication 0,18 kW Conveyor for warm pellets 2,2 kW Belt conveyor to the refrigerator 2,2 kW Pellet refrigerator, outflow 1,5 kW Fan for the pellet refrigerator 11 kW Fan for the suction 5,5 kW Elevator 2,2 kW Belt conveyor 1,5 kW Belt conveyor 4 kW Combustion air fan 45 kW Conveyor fan 22 kW Conveyor fan 11 kW Ppodpfx Aoyvz Afeb Ujp Silo filter 0,04 kW Filter fan 4 kW Screw for dust silo 2,2 kW Driving motor for dust silo 1,1 kW Oil pump 1,5 kW Dosing screw 0,75 kW Sluice feeder 0,37 kW

Condition: used, Year of construction: 2024, Engine: Kubota D1703-DI with 18.5 kW, Emission Stage V Equipment: - Foldable ROPS - Sprinkler timer - Comfort seat, laterally adjustable - Mechanical offset - Drive lever forward/reverse, dual - Two selectable vibration levels - Selectable vibration front / rear / both - Spring-loaded scraper - Work lights (engine hood + 1x water tank) - Reverse alarm - Beacon (rotating warning light) - Central lifting point - Integrated lashing points - CE marking Options for CC1100VI / CC1200VI: - Work lights on ROPS (+2) - Road lights (replace engine hood work lights) - Work light on water tank (+1) - Lockable water tank cap - Rearview mirror - Bottle holder - Edge pressing device front right - Cutting wheel - First aid kit - 50-hour service kit - Dyn@Link telematics system Ppjdpfxsv R Ur Re Ab Usp Additional notes: - Trade-in and purchase of vehicles and machinery possible. - Sales price excludes transport - No liability for printing & typographical errors. - Errors, changes, and interim sale excepted. - Offer non-binding. - Photos may differ. - The price applies to the current condition. - All information without guarantee. Further information: Type: Tandem roller Combustion engine output: 25 HP (18 kW)

Condition: new, functionality: fully functional, machine/vehicle number: CPD25ANEU6000, Year of construction: 2025, load capacity: 2,500 kg, lifting height: 6,000 mm, free lift: 1,630 mm, mast type: triplex, construction height: 2,675 mm, fork length: 1,200 mm, empty load weight: 3,550 kg, total length: 2,628 mm, drive type: Lithium-Ionen, construction width: 1,163 mm, Electric 4-wheel forklift Chassis number: CPD25ANEU6000 Load center: 500 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: New machine Technical condition: New Psdpfox Tm H Rjx Ab Uopp Front tires type: Non-marking Front tires condition: New Rear tires type: Non-marking Rear tires condition: New Battery voltage: 80V Battery capacity: 175Ah Battery type: Lithium-ion Battery year: 2025 Battery condition: New Description: The A-Series lithium-ion forklift is an innovative electric forklift, based on the proven architecture of internal combustion engine forklifts and combined with the advantages of advanced lithium battery technology. This lithium-battery-powered electric forklift brings together a robust design with cutting-edge energy systems, offering a powerful alternative to conventional diesel or LPG forklifts. The A-Series stands out for its superior vehicle performance, high level of ergonomics, excellent reliability, and minimal maintenance costs. Thanks to its high lifting capacity and optimum suitability for outdoor use, it is the ideal solution for standard and heavy-duty applications in warehousing, logistics, or industrial environments. The A-Series lithium forklift is designed for companies seeking to electrify their material handling fleet—without compromising on power or endurance. It meets all the requirements of traditional IC engine forklifts and enables a seamless transition from fossil fuels to electric operation. Side shifter, third valve, fourth valve, heater, full cabin, interior mirror, wiper, LED lighting, integrated charger.

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 2,500 kg, lifting height: 4,800 mm, free lift: 1,180 mm, mast type: triplex, construction height: 2,225 mm, fork length: 1,200 mm, empty load weight: 3,550 kg, total length: 2,628 mm, drive type: Lithium-Ionen, Electric 4-wheel forklift Load center: 500 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: New machine Technical condition: New Front tires type: Non-marking Front tires condition: New Rear tires type: Non-marking Rear tires condition: New Battery voltage: 80V Battery capacity: 175Ah Battery type: Lithium-ion Battery year of manufacture: 2025 Battery condition: New Description: The A-Series lithium-ion forklift is an innovative electric forklift based on the proven architecture of internal combustion engine forklifts while combining the advantages of state-of-the-art lithium battery technology. By merging a robust chassis with a forward-thinking energy system, this lithium battery electric forklift delivers a powerful alternative to traditional diesel or LPG trucks. The A-Series stands out with superior vehicle performance, high ergonomics, outstanding reliability, and minimal maintenance costs. Thanks to its high load capacity and optimal suitability for outdoor applications, it is the ideal solution for standard and heavy-duty operations in warehousing, logistics, or industrial environments. The A-Series lithium forklift is designed for companies aiming to electrify their material handling fleets—without compromising on power or endurance. It meets all the requirements of conventional IC forklifts, enabling a seamless transition from fossil fuels to electric operation. Side shifter, Pedpfxex Tm H Ds Ab Uopp 3rd valve, 4th valve, heating, full cabin, interior mirror, windscreen wiper, LED lighting, Integrated charger

Condition: used, Year of construction: 2025, operating hours: 12 h, Radio-controlled implement carrier. The Energreen RoboEVO is a radio-controlled implement carrier that can be used even in particularly difficult and hard-to-access terrain with gradients of up to 55°. It is equipped with a powerful 40 hp diesel engine and two double-acting hydraulic control units to ensure the compatibility with various attachments. - 150m range of the radio remote control - Optimal maneuverability - Ground grip in all directions up to 55° - Special oil pan for safe engine lubrication - Multifunctional use - High performance, fast work completion - Best traction on any surface Special equipment: - Hydraulic quick couplings "CEJN" - EU DUAL BAND radio remote control with tilt sensor - Bio-hydraulic oil PANOLIN HLP SYNTH 46 - Standard color: Orange RAL 2011 / Gray RAL 7021 - Rear radiator guard - Counterweights Comp. 70 kg - 1 LED work light - LED all-round warning light 12 Volt with bayonet lock We have a grass mulcher, forestry mulcher, brush cutter head, and a stump grinder in stock. Additional attachments such as double cutter bars, mowing booms, and many other attachments are available upon request! We are happy to offer suitable financing, hire purchase, or leasing. Delivery or shipping by arrangement. We We always have a selection of used and new equipment in stock, as well as other equipment for demonstration. Contact us! We also rent all equipment with and without a driver. Other information: - Trade-ins and purchase of vehicles and machines are possible. - Sales price excludes transport. - No liability for printing and typographical errors. - Errors, changes, and prior sale reserved. - Offer subject to change. - Photos may vary. Price is based on current condition. - All information is subject to change. Psdpfx Asv R E Hfob Uspp Further information Combustion engine power: 41 hp (30 kW)

Condition: used, Year of construction: 2005, power: 5.5 kW (7.48 HP), volume flow: 4,400 m³/h, intake manifold diameter: 250 mm, total height: 2,600 mm, total length: 3,500 mm, total width: 1,600 mm, overall weight: 800 kg, Equipment: CE marking, No. 04523 Mobile extraction unit / mobile dust extractor Schuko Vacomat 250 Used, year of construction 2005 Ppsdpfxjyl Nc Ds Ab Uep Nominal volume flow 4400 m3/h Minimum volume flow 3533 m3/h Negative pressure 2850 Pa Suction nozzle diameter 250 mm Motor power 5.5 kW Nominal speed 2880 rpm Automatic or manual operation Approved for installation in workrooms Residual dust content level H3, 0.1 mg/m3 Type B1, Suitable for extracting combustible dusts in zone 22 Filter bags made of antistatic polyester needle felt Pneumatic filter regeneration, automatic or manual Automatic extinguishing device with powder extinguisher GS-tested CE-compliant Including electrical connection cable with 32 A plug Transport dimensions approx. 3500 x 1600 x 2600 mm LWH Weight approx. 800 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2022, operating hours: 300 h, load capacity: 1,800 kg, lifting height: 4,700 mm, free lift: 1,180 mm, fuel type: gas, mast type: triplex, construction height: 2,270 mm, empty load weight: 3,280 kg, drive type: Treibgas, construction width: 1,120 mm, LPG forklift Load centre: 500 Mast type: Triplex Front tyres type: Superelastic Front tyres size: 6.50-10 Rear tyres type: Superelastic Rear tyres size: 5.00-8 Battery voltage: 12V Battery capacity: 60Ah Battery year: 2022 Pjdpfxow Hh S Ie Ab Ujpp Description: Internal combustion engine (LPG) with catalytic converter, EPR gas system with electric shut-off valve, yellow beacon light Sideshift, Rear work lights, load guard, full cab,

Condition: new, Year of construction: 2026, functionality: fully functional, power: 15 kW (20.39 HP), Airrex AH 300i Mobile Infrared Heater Tank: 45 l Output: 15 kW Suitable for spaces up to 1500 m³ Highly economical – fuel consumption 1.05 – 1.24 l/hr Dimensions (LxWxH): 95 x 30.5 x 101 cm Weight: 46 kg Adjustable temperature range: 0 – 40°C Mobile, equipped with swivel casters Ready for immediate use – just plug in and switch on Clean combustion – no chimney required! App control – set temperature, receive notifications, and check fuel levels directly from your smartphone Dry heat – no condensation as with gas heaters Operates on biodiesel or diesel/red diesel Low noise – only 48 dB Podpfx Ajylv Iysb Uepp No dust – no fan No exhaust gases – emits no burning smell Complies with the latest EU emissions directive Automatic restart after power outage

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), Airrex AH 800i Mobile Infrared Heater Tank: 70 l Output: 22 kW Suitable for spaces up to 2000 m³ Highly economical – fuel consumption 1.7 – 1.9 l/hr Dimensions (LxWxH): 130 x 35 x 134 cm Weight: 81 kg Adjustable temperature range: 0 – 40°C Mobile, mounted on caster wheels Ready to use immediately – just plug in and switch on Pjdpeylv Dzefx Ab Uspp Clean combustion – no chimney required! App-controlled – set temperature, receive notifications, and check fuel level directly on your smartphone Dry heat – no condensation as with gas heaters Operates on biodiesel or diesel/red diesel Low noise – only 48 dB No dust – no fan No exhaust gases – emits no combustion odors Complies with the latest EU emissions directive Automatic restart after power failure

Condition: used, Year of construction: 2009, negative pressure: 16,000 Pa, filter area: 40 m², volume flow: 5,800 m³/h, RUWAC dust extractor, extractor, dust collector, vacuum filter, self-cleaning, dust collector for extraction of metal dust, mineral dust, hard fibers, combustible, hazardous, toxic substances and efficient collection of process dust, sandblasting, sodding, grinding, polishing and all kinds of dry dust. Thanks to the wide performance range, these devices Podpfstqt Uxjx Ab Uepp are perfectly suited for almost all applications applications - both as a single-station solution and as a central solution. All dust collectors are equipped with large-size filters for dust class M. The unit in the version with dust explosion protection (ATEX zone 22) - EX II 3D , T= 70 °C The high-pressure fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Pocket filter cartridge - multi-pocket (area of 40 m2) 20 Kw fan. The unit has a frequency converter (Danfoss VLT). Capacity 5800m3/h Vacuum 16,000 Pa Electromotive cleaning of the filter by means of vibrating motors. Complete with dispenser (for sticky dusts) for automatic addition of filter additives to protect filter cartridges. Inlet diameter - 300 mm