Used Glass Granulator for sale (4,385)

Condition: excellent (used), Year of construction: 2022, operating hours: 600 h, functionality: fully functional, machine/vehicle number: PO210417, total width: 4,600 mm, total length: 25,000 mm, total height: 3,000 mm, type of input current: three-phase, energy consumption: 1,700 kWh, input current: 2,230 A, The AG series of convection tempering furnaces with forced air circulation (Northglass fifth-generation furnaces, featuring proprietary focused convection technology) was developed to meet the growing customer demand for more efficient low-E glass tempering, improved product quality, and reduced energy consumption. The AG series furnace integrates the advantages of a four-convection furnace, primarily offering benefits in terms of higher productivity, superior product quality, and easier process control. The furnace consists of loading conveyors, a heating section, a convection system (upper and lower), a flat tempering/cooling section, and an unloading conveyor. The equipment package includes air ducts and a device control system. Max. working width: 2,850 mm. Max. loading length: 5,000 mm. Max. glass loading area: 2,850 x 5,000 mm (5-19 mm), 2,850 x 4,600 mm (4 mm). Upper fan convection: 6 fans x 4 kW, lower: 6 fans x 3 kW. Main technical data is attached in a PDF file. Gjdpfx Aljz Dhm Ue Uekc

Condition: excellent (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, The furnace is designed for the tempering of colored, ornamental, and screen-printed glass, as well as clear float glass with an emissivity of over 0.04. According to EN 12150:1 – 2000, for 4 mm thick glass, a success rate of at least 95% is guaranteed, and for glass thicker than 5 mm, a success rate of over 97% is guaranteed. Structurally, the furnace consists of five distinct zones: loading, bending module, heating, cooling, and unloading. When tempering flat glass, the workflow is from left to right: loading – passing through the bending module (which functions as a flat conveyor) – heating – cooling – unloading. When bending glass, the following workflow applies: loading – passing through the bending module – heating – back into the bending module (where the glass is moved transversely along the length of the furnace from left to right while the upper and lower parts of the module gradually conform to the curve to be created) – unloading (in the case of curved glass, unloading also takes place at the entrance). The inlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides. The structure of the heating section is a box-type with a double layer coated with thermal insulation material (perfect insulation performance, low energy consumption, and natural cooling of 15 ℃ / h). Inside the heating zone, there is a conveyor system with ceramic rollers resistant to high temperatures, manufactured by Vesuvius (diameter 48 * Ø85mm, spacing 120mm). The heating elements (resistors) are installed on the upper and lower sides of this zone. The resistors are arranged in a matrix with temperature sensors, automatic heating and pause functions to save energy. The upper section has 25 heating elements, and the lower section also has 25. Each resistor has an independent control loop. Gjdjz Ru Iyepfx Al Ujkc Outlet conveyor The outlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides.

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 114/2021, functionality: fully functional, operating hours: 120 h, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 40 mm, total width: 1,700 mm, total length: 20,000 mm, total height: 4,000 mm, pressure: 8 bar, HIGH-SPEED DRILLING AND MILLING MACHINE: a compact, high-performance vertical machine suitable for drilling and milling rectangular glass sheets. Ideal for series production and can be integrated with grinding lines or used as a stand-alone unit. The machine can process glass with the following properties: Technical specifications of the drilling and milling machine: Technical specifications of the vertical washing machine Glass type: Clear/extra clear, coated, colored in the mass Glass shape: Rectangular Minimum dimensions of glass processed by the drilling machine: 500x300; minimum dimensions of glass for the washing machine: 150x400 Maximum dimensions: 2400x4000 Thickness: 3-12 mm Hole diameter: 6-40 Gsdpfx Aez Ihfxel Ujkc Working height: 600 ±50 mm Power: 22 kW

Condition: ready for operation (used), Year of construction: 2010, operating hours: 20,000 h, functionality: fully functional, overall weight: 15,000 kg, rotor diameter: 500 mm, rotational speed (max.): 200 rpm, power: 90 kW (122.37 HP), input voltage: 400 V, type of input current: three-phase, The MeWa Universal Granulator UG 1000 is a high-performance, stationary single-shaft secondary shredder, specifically designed for the fine shredding and recycling of various composite materials and waste. The machine operates according to the principle of a guillotine shear, in which the material is cut between rotating and stationary blades. Drive power: 90 kW Cutting chamber / working width: 1,000 mm Gksdpfez Antujx Al Ujc Number of blades (rotor / stator): 25/5 blades Rotor diameter (circle of rotation): 500 mm Total weight: approx. 15 tons Screen size: Flexible, interchangeable screens under the rotor determine the final particle size (typically between 10 mm and 80 mm).

Year of construction: 2023, operating hours: 16 h, condition: like new (used), functionality: fully functional, GCV Glass Picasso V2 260 glass painting machine, year of manufacture 2023, condition - as new. AUTOMATIC PAINTING MACHINE GCV Picasso-V2 260 Max. Glass Width (mm): 2600mm Gksdpszhagkefx Al Ujc Max. Glass Length (mm): unlimited Max. Glass Weight (kg): 600 kg Min. Glass Size * Width * Length (mm): W 220mm * D 900mm (single panel size) ADDITIONAL PRODUCTION EQUIPMENT 1 pc. transport table, equipped with wheels 1 pc. large stand for drying and storage portable sample boards with color palettes Mixer with pigment stand, Number of containers: 24, Container volume: 2.3 l

Condition: excellent (used), functionality: fully functional, Glass transport rack A type Loading height: 1800 mm Loading width (glass thickness): 400 mm each side Total rack dimensions: 1150 x 1150 mm Approx. 65 pcs. available Very good and clean condition As is Godpjznufuefx Al Uekc Available immediately

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Harp racks for glass transportation 60 loading slots Maximum loading height: 1300 mm Maximum loading capacity: 1500 kg 5 pcs. in stock Gksdjznlrfspfx Al Uec New, never used ! Available immediately

Condition: new, Year of construction: 2024, total height: 1,800 mm, total width: 1,000 mm, total length: 2,000 mm, Glass storage rack suitable for storing and transporting glass and other sheet goods. Gkjdpfxoxddcho Al Uoc Load capacity: 2000Kg Length: 2000mm Width: 1000mm With appropriate inclination angle. The racks are suitable for cranes, with points suitable for connecting a crane on top. With rubber pads to prevent damage to the stored glass or other materials. A forklift space is provided at the bottom. The racks are completely new, have CE certification and a data plate. Discount for larger quantities! Ask about stock!

Condition: good (used), Year of construction: 2022, operating hours: 634 h, Manufacturer: Glass Gkjdpfxey S Txqj Al Uoc Model: VSM80F Year: 2022 Condition: Used Serial Number: 4396 Stock Number: 3377 Capacity: 80 litres Infeed height: 950 mm Outfeed height: 870 mm Compressed air: 6 Bar Steam: 4 Bar, DN25 Power: 3 x 400V, 50Hz, 2.8kW Dimensions: 1400 x 2100 x 1650 mm Weight: 780 kg With double jacket and direct steam injection nozzles. Including temperature sensor and 10.4" touch screen. Only 634 hours, in new condition!

Condition: reconditioned (used), Year of construction: 2018, STORK VS 24/8 Monobloc Bottling Line, fully refurbished by the professional company Z.M. ROBAK. The machine is virtually unused, with the protective film still on the housing. Currently, it is set up for filling glass containers – it has been test run for bottling alcohol. Filling valves: 24 pcs (with light vacuum for still beverages) Capping heads: 8 pcs (configured for aluminum screw caps) Output: approx. 7,000 bph (700 ml) Gkjdpfeu Nhiqsx Al Uec Capable of operating with bottles of the following dimensions (after format adjustment): - Diameter: 45 mm to 110 mm - Height: 105 mm to 400 mm - Standard neck diameter: 28 mm - Optional neck diameter (after format change): 18 mm to 43 mm Machine dimensions: - Width: 2,900 mm - Height: 2,200 mm - Depth: 2,200 mm Weight: 3,200 kg Installed power: 5.5 kW Required air pressure: 0.6 MPa Year of manufacture/modernization: 2018 – has not been used in production since refurbishment Condition: The machine is practically as new, with negligible signs of use. The machine comes with original electrical documentation.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Glass GbmH mixer marinator for delicate food products, with manual tilting and multi-functional control display. Fitted on mobile frame. Suitable for semi-solid, powdery and liquid products. Model / Type - VSM 150. Serial number - 4174 Date of manufacture - 2019. Capacity - 150 litres. Electric supply - 400 V / 50 hz / 3 phase. Power - 16 Amps. Gkjdpfsvuhiqox Al Uec

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, power: 1,143 kW (1,554.05 HP), warranty duration: 12 months, # NorthGlass BU1E60 Glass Tempering Furnace – Fully Refurbished – 12-Month Warranty We offer for sale a NorthGlass BU1E60 horizontal glass tempering furnace equipped with a forced convection heating system. The furnace is pre-owned and has undergone a comprehensive refurbishment, including the replacement of major mechanical, electrical, and electronic components. Refurbishment work includes the replacement of: - Heating elements Gsdpfxoz Rv Dpj Al Uokc - Ceramic rollers - Electric motors - Automation and control systems - Electronic components The furnace has been fully refurbished and prepared for further industrial operation. Warranty: 12 months. ### Main Technical Specifications - Manufacturer: NorthGlass (China) - Model: BU1E60 - Condition: Used, fully refurbished - Maximum glass size: 2,850 × 6,000 mm - Minimum glass size: 300 × 300 mm - Glass thickness: 5–22 mm - Heating system: Forced convection - Convection system: 6 high-temperature upper convection fans with variable frequency control - Production capacity: 16–18 batches/hour (5 mm clear glass) - Heating power: 1,143 kW - Quenching fan power: 2 × 220 kW - Rated electrical capacity: 1,100 kVA - Minimum Low-E emissivity: ε = 0.04 - Quality standard: GB15763.2-2005 ### Supported Glass Types - Clear float glass - Low-E coated glass - Patterned glass - Body-tinted glass ### Equipment Configuration The furnace includes: - Loading table - Heating section - Flat glass quenching section - Unloading table - Electrical control system - Frequency converters - Air circulation system - Quenching fans with vibration isolation frames ### Key Advantages - Fully refurbished with replacement of major components - Advanced forced convection heating technology - Suitable for processing Low-E glass - Large processing capacity of up to 2,850 × 6,000 mm - High productivity of up to 18 batches per hour - 12-month warranty - Cost-effective alternative to purchasing a new glass tempering furnace ### Price and Delivery Price: Upon request Delivery terms and additional technical information are available upon request. Contact us for a detailed quotation, additional photographs, videos, and technical documentation.

Condition: used, loading : 75 to 80 % with 2 arms all stainless steel mobile 0,81 kW tiltable drum Gkodpfx Alsz Nd H As Usc with working and waiting time dimensions (l x w x h) : ± 1.300 x 1.100 x 2.100 mm

Condition: excellent (used), Year of construction: 2012, operating hours: 37,984 h, functionality: fully functional, machine/vehicle number: 30-2626/01WM4513c.132, total length: 6,698 mm, total width: 2,730 mm, total height: 3,008 mm, overall weight: 4,500 kg, input current: 95 A, feed length X-axis: 2,500 mm, feed length Y-axis: 1,300 mm, input frequency: 50 Hz, type of input current: three-phase, input voltage: 415 V, working height: 925 mm, power: 58 kW (78.86 HP), feed rate X-axis: 18 m/min, pressure: 8 bar, rotational speed (max.): 30 rpm, travel distance X-axis: 6,698 mm, year of last overhaul: 2025, operating pressure: 8 bar, final pressure: 8 bar, protection type (IP code): IP00, volume flow: 10 m³/h, type of cooling: air, number of rollers: 3, Equipment: rotational speed infinitely variable, We offer this very good BENTELER 30-2626 Benteler Glass wash, year of construction 2012. Operating voltage: 415 V Phases: 3 Frequency: 50 Hz Gsdpfjz Rztvex Al Uskc Connected load: 50 kW Nominal current: 55 A Maximum current limited: 87 A Control voltage AC: 125 V Control voltage DC: 24 V Year of manufacture: 2012 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 3,550 mm, total width: 2,600 mm, overall weight: 2,500 kg, space requirement height: 2,600 mm, space requirement length: 3,600 mm, space requirement width: 3,000 mm, 300-liter stainless steel reactor, manufactured by GLASS, model VAS 300. Year 2014. With agitator, jacket, and electrical panels. Motor specifications: 43.19 kW at 50 Hz, 400 V Volume Total capacity 300 L Material Stainless steel Technical specifications Model VAS 300 Year of manufacture Gkjdev Rr E Ijpfx Al Uec 2014 Equipment configuration Agitator Jacket Electrical panels Transport information Length 3550 mm Width 2600 mm Height 2500 mm Weight 2500 kg Manufactured by Glass

Condition: new, Year of construction: 2017, Spiral conveyor for pellets and granules: For discharging and conveying pellets with a capacity of 600 kg/h and a bulk density of 0.7 t/m³, and filling 4 big bag stations with a safety end discharge. 1 Transitube discharge hopper, type: SC – 200 Capacity: 200 liters Overall height: 1,270 mm Without lid With sturdy grating as grip protection With built-in empty indicator, vibrating rod sensor All parts in contact with the product made of stainless steel 1.4301, glass bead blasted 1 Transitube screw conveyor, type 53 PCR Conveying length: 10 m (+/- €285 per meter) Motor with frequency converter, provided by the customer: 230/400 V, 50 Hz, 1.1 kW, 920 rpm Conveying screw with square profile 7x7 made of stainless steel Flexible outer hose made of food-grade polyamide Inlet flange type SC Ø 150 with blanking lid for emptying and 2 clamping rings R Insertion tube for coarse adjustment of the output Outlet flange type GW Ø 150 with grip protection and 2 clamping rings R Sensor connection type M1SW with built-in vibrating rod as maximum level indicator Gkedpfx Aszk I Tkel Ujc All sheet metal parts made of stainless steel 1.4301, glass bead blasted 1 transitube® screw conveyor, type: 53 PCR/VA PM Conveying length: 8 m Motor with frequency converter, provided by the customer: 230/400 V, 50 Hz, 1.1 kW, 920 rpm Flexible outer hose made of food-grade polyamide Square screw 7x7 made of stainless steel 4x intermediate outlets type GM DN 150 with clamping ring Pneumatic shut-off valve with safety end discharge Outlet flange type GW DN 150 with clamping ring Flexible hose 2 meters with mounting flange P1SW for connecting to a container All parts in contact with the product made of material: 1.431, glass bead blasted 4 BIG BAG filling frames Consisting of: 1x base frame, open on one side, internal dimensions 1,500 mm x 1,500 mm Including base plates for connecting the stations and prepared for anchoring in the floor 4x support columns 2100 mm (big bag height 1,850 mm) 1x top frame for hanging the bags With hanging hooks for big bags 1,300 x 1,300 and 700 x 1,100 mm Mounting plate, dimensions provided by the customer for push buttons and light column Support columns and frame parts made of stainless steel Filling connection set consisting of: Crossbars for supporting the conveyor with mounting flange P Ø 150 and P1SW Ø 150 for connecting to the conveyor with built-in vibrating rod as full level indicator Bag spout and bag clip for DN 300

Condition: like new (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, total width: 2,600 mm, total length: 3,700 mm, overall weight: 2,700 kg, type of input current: three-phase, input voltage: 6,000 V, input frequency: 50 Hz, pressure: 6 bar, Automatic glass cutting table for monolithic glass with loading-unloading arms. Main features: - Rectified rack-and-pinion transmission and linear guides with “0” clearance, ensuring high precision of movement on both axes. - Metal structure made of sheet metal profiles cut on a laser cutting machine and formed on a bending machine. The resulting structure has a minimum number of weld seams and, therefore, high dimensional accuracy and stability. - Latest generation, brushless electric motors, Lenze – Germany. - Automatic detection of glass thickness and automatic adjustment of the cutting head pressure to achieve maximum cutting quality. - The control panel can be located up to 7 meters away from the table. - Hydraulic folding of the loading-unloading arms. - The loading cycle is as follows: the extensions of the folding arms are manually pulled out, and the folding into the vertical plane is commanded. The glass is supported on the bases of the arms, and the folding is commanded. After the glass reaches the horizontal plane, it is manually positioned by the operator anywhere in the cutting area. - Automatic detection of the glass position (automatic squaring) and automatic correction of the cutting head trajectory (the glass can be positioned anywhere on the surface of the cutting table). - “Double 0” system that allows mirror cutting of laminated glass with an accuracy of ± 0.5 mm. General feature: - The work surface of the Turomas tables is made of aluminum covered with a phenolic plate that is ground on one side, and a synthetic felt is glued on top. Since there are no wooden plates in the structure, there are no pressure losses in the air cushion. Also, due to the phenolic plate (a latest generation plastic), the work surface of the table is particularly resistant to mechanical impact, deformation, solvents, acids, humidity, and water vapor. - Intuitive TUR-ISO operator interface, easy to use, developed in a single window. The cutting plan can be viewed and edited in a field of this window. The Maintenance menu can also be accessed from this window, where all the set parameters of the machine can be viewed and modified. - Remote technical support system via the Internet for quick diagnosis and service. - Protection system with barriers and emergency stop button. - Scanner Scanning is done through a sequence of points, which are then converted into curves. The template thickness can be up to 20 mm. - VIN-CUT vinyl cutting - BRK 23 system Gjdpfjz Rvi Ejx Al Uskc - Consists of 1 transverse breaking bar + 1 longitudinal breaking bar (materialized by points). This breaking system guarantees minimal contact with the glass surface and maximizes the reduction of potential scratches due to the wear of traditional breaking bars (with a wooden contact surface). Automatic system for transferring the cut glass sheet from the cutting table to a breaking table. The system is mounted on the cutting bridge, on the opposite side of the cutting head, and consists of two vertical pistons that allow the glass to be moved to the next table. Cutting head with two cutting rollers. The table reads the glass thickness and automatically selects which of the cutting rollers to lower. By using this option, the entire range of glass thicknesses that can be cut is covered, in the range of 2 - 25 mm.

Condition: excellent (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, total length: 40,000 mm, total width: 4,000 mm, total height: 4,500 mm, working height: 2,500 mm, input voltage: 400 V, overall weight: 48,000 kg, type of input current: three-phase, Equipment: documentation/manual, Complete line for the production of single and double-pane insulated glass units, including: Automatic bending machine for frames FB-H PC system Automatic spacer filling machine DF-R-V Automatic insulated glass production line IGL-G-H2 (with automatic argon filling at a minimum level of 90%) Automatic sealing robot (two components) ASR-H2.5 Butyl applicator BE-A Rotating table RT-A Frame transporter Technical data: 1) Power supply: AC380V, 50Hz, approximately 45KW 2) Air pressure: 0.6~0.7MPa 3) Dimensions: 33250(L)×3000(W)×3000(H)mm 4) Max. load: insulated glass unit approximately 850kg, suction side approximately 400kg 5) Min. glass size: 450×350mm 6) Max. glass size: 5000×2500mm 7) Insulated glass unit thickness: 14~70mm 8) Working height: 530±30mm 9) Transporter speed: 35m/min 10) Inclination angle: 6°~8° Gkedpfez Ihhtex Al Uoc 11) Glass thickness: 4-15mm 12) Bristle diameter: 0.12mm 13) Max. washing speed: 0-10m/min adjustable 14) Average expected output: 1 m2 (1000x1000mm) of rectangular insulated glass units with the configuration (6mm+9A+6mm), for example, approximately 550 units per 8 hours with automatic gas filling, approximately 650 units per 8 hours without gas, for single-pane units (depending on the current factory situation and employee efficiency).

Condition: used, loading : 75 to 80 % 2,77 kW tiltable drum with 2 arms Gedpfjz Ahfwex Al Ujkc pneumatic: 6 bar outside dimensions (l x w x h) : ± 2.110 x 1.100 x 1.650 mm

Year of construction: 2003, condition: used, functionality: fully functional, input voltage: 400 V, input current: 85 A, continuous power: 45 kW (61.18 HP), Plastic granulator ESMOS type Balkán, version M 500/800, manufacturer ESMOS, Bulgaria. For size reduction of plastic waste, particle size depending on screen. Gsdoz I Izgspfx Al Ujkc Technical data (per manufacturer's documentation): – Feed opening: 800 × 500 mm – Knives: 6 rotor knives, 4 stator knives – Drive: electric motor 45 kW, 1475 rpm, V-belts – Power supply: 3 × 400 V / 50 Hz, rated current 85 A, 63 A plug – Throughput: approx. 400–800 kg/h depending on material and screen – Extraction outlet Ø 146 mm, protection IP 54 – Weight: 2,750 kg Manufacturer's technical documentation available (see PDF). Condition: in working order. Inspection and test run by appointment on site (Cheb, Czech Republic). Loading onto truck on site. Sold as is, price net plus VAT.

Condition: good (used), Washing machine: GTA, year of manufacture: 2003 Press: ZP 3.1, year of manufacture: 1995 Gksdez Scanjpfx Al Uoc Sealing unit: VFL-1D/27. Year of manufacture: 2009 Dosing unit: DOS-1PSD. Year of manufacture: 2009. Material: polysulfide. Main components: Glass washing machine with inlet and outlet up to and including the gas press, inspection station, gas-filling press with outlet up to the end of the automatic sealing unit, automatic sealing unit. System configuration: see sketch Max. glass height: 2700 mm Max. glass length: 3500 mm The washing system’s drives have been refitted with new bearings. This very well-maintained system is still in operation. Viewing is possible by appointment. Condition: good, second-hand

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2012, Glastronic-made 1600mm vertical glass washing and drying machine. The machine is in a well-maintained and inspected condition, ready for immediate use. New squeegee rubbers, new bearings. Working direction: left to right. Maximum washable glass height: 1600mm. Number of brushes: 4. Drying fan. Stainless steel cabin. Water heating. Backlighting. Stop sensor. Gsdpfxjz Ngyrs Al Uskc The machine has been fully inspected, cleaned, and is in perfect working order and can be viewed at our facility!

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1303, total width: 4,400 mm, total length: 3,300 mm, total height: 1,700 mm, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, feed length X-axis: 3,210 mm, feed length Y-axis: 3,300 mm, cutting length (max.): 3,300 mm, We offer this Hegla VSG-M 33 MT laminated glass cutting table, which is in very good condition and was manufactured in 2005. Manufacturer: Hegla Model: VSG-M 33 MT Year of manufacture: 2005 Gedpez Hl T Rsfx Al Uskc Condition: very good ID Category: 518 ID Machine Type: 898 Type: laminated glass cutting table If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: used, loading : 75 to 80 % mobile built-in vacuum pump 1,22 kW tiltable drum outside dimensions (l x w x h) : ± 1.100 x 850 x 1.600 mm Gkedpfx Ajzzadijl Uoc

Condition: like new (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 510000087, BAVELLONI MTS 42 For sale: a well-maintained Bavelloni MTS42 glass cutting machine, boasting the renowned reliability and quality of Bavelloni. It is an ideal choice for glass processing workshops, ensuring precise and efficient operation. Key features: – Working dimensions: 3700x2750 mm – Thickness: 3-19 mm – Speed: 120 m/min – Power: 21 kW – Precision cutting head with adjustable cutting pressure – Stable, robust machine frame designed for a long service life – Easy-to-use control system Gkodsy D Eq Nepfx Al Ujc – Suitable for fast and accurate series production – Well-maintained, ready for immediate use A reliable, industrial-grade machine designed for heavy-duty use, offering excellent value for money. For sale due to company closure! European installation can be arranged!