Used Polymer for sale (95)

Condition: used, Polymer Recovery, Dremel Style plastic washer and spin dryer vibratory screener, gas blower system, sink float tank and feed hopper with augers, feed hopper will need to be removed from I-beam frame, unit is bolted and welded to frame (does not include lower I-beam frame), includes all control panels, winning bidder responsible for proper disconnection and removal of machine. Bwsdpoxd D I Rjfx Ab Uok

Condition: used, functionality: fully functional, Polymer Laboratories PL-ELS 1000 Evaporative Light Scattering Detector. Laboratories is a completely new design of high sensitivity Evaporative Light Scattering (ELS) Detector for HPLC, microHPLC and GPC/SEC. This ELS detector has replaced the RI for the detection of solutes with no UV chromophore, giving enhanced performance with the benefits over an RI of improved sensitivity, excellent baseline stability, gradient compatability, and providing a positive response for all solute/solvent combinations. Features: Bedpst Uk Dmjfx Ab Ujwk -Small footprint for laboratory convenience -Improved sensitivity -Low dispersion -Excellent baseline stability -Wide gradient compatibility -Rapid equilibrium -Detection of even relatively volatile compounds -The PL-ELS 1000 from Polymer Good working condition. Please check out our other listings as well.

Year of construction: 1999, condition: used, We have two units available Name: Polymer dosing system for liquid Manufacturer: Reiflock Type: Reifomat 500 Year built: 1999 Performance: Polymer throughput: 0,12 - 2,5 l / min. Water flow: 40 - 160 l/min. Dimensions: L 1000 x W 750 x H 1500 mm Bsdpfx Abjyvixbs Uswk Empty weight: Approx. 120 kg Technical doc.: yes Condition: Second hand Price: On demand

Year of construction: 1989, condition: ready for operation (used), Polymer storage tank Article no.: RE-HU-2019-0602-B38-e Product: Used polymer storage tank container Material: GF - UP / Leguval W 17 (glass fiber reinforced polyester resin with top layer) Manufacturer: Theodor Vanck GmbH Bwsdsd Hgc Uopfx Ab Uek Dimensions: diameter 2.40 x height 2.80m Volume: 12 m3 Year of construction: 1989 Fabr. No .: 55163

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 200 h, The system is located in the BIBUS Austria Democenter and can be inspected and tested at any time. The device can process a total of 14 materials - in addition to common plastics such as ABS, PLA, TPU and Carbon PA, high-performance polymers such as Ultem, Peek, CarbonPeek and Helios-Peek are also available. Four material-dryer are included in the delivery, Payment terms: Cash in advance, excluding transport and commissioning - these costs are charged depending on the location. Bjdpfx Abjibikws Uewk

Year of construction: 2000, condition: used, Manufacturer: Tomal Type: PolyRex 3,0 Bwjdpfxeyg E A Aj Ab Uek Year built: 2000 Content: 2 x 1,5 m3 Conveying / dosing of: Powdered Polymer # Chamber: 2 Control: Yes Material: Stainless steel Model: Vertical Dimensions: L 1.900/1.050 x W 1.800/600 x H 2.200/2.200 mm Empty weight: 300 kg Technical doc.: Yes Condition: Second hand Price: By request

Condition: ready for operation (used), Two Machines Flake Purifier+ C 512 HR Color Sorter & Flake Purifier+ N 1024 Sesotec Polymer sorter Specs on Flake Purifier+ C 512 HR Color Sorter Refurbished in 2021 Bjdpfx Aoxlknmeb Uowk Technical Data Throughput up to (kg/h) Up to 3.8 Suitable grain sizes 2 - 20 mm Power (max. KVA) 3.4 Temperature range +5"C to + 40"C Weight 1300 to 1500 kg Electrical connection Power connection cable 5x4 mm2 Electric fuse 16 A Protection class IP 54 Rated current (max. A) 5 Specs on Flake Purifier+ N 1024 Sesotec Polymer sorter Technical Specifications • Working width: 1024 mm • Nozzle grid / valve spacing: 3.2 mm • Number of valves: 160 high-speed air-eject nozzles • Detection resolution: 2 mm (optical) / 16 mm (metal) • Metal detection sensitivity: Fe ≈ 0.6 mm | Al ≈ 0.1 mm • Throughput capacity: up to 3 – 3.8 t/h (depending on material and sensor setup) • Sorting technology: CCD color camera + metal detector (“CM” configuration) • Particle size range: 2 – 20 mm • Separation method: Compressed-air blast via precision valve array • Enclosure rating: IP 54 • Power requirement: ≈ 3.4 kVA | 230 V, 50 Hz • Operating temperature: +5 °C to +40 °C • Purity achievable: up to 99.999 % (depending on configuration) • Control system: Touch-screen interface with VISUTEC software (optional remote monitoring via VISUDESK) • Modular design: Expandable to include NIR sensor (“N”) or additional sorting modules

Condition: used, Year of construction: 2017, • Manufacturer: AGI • Model: TOWER A3W • Year of manufacture: 2017 • Machine type: Photopolymer plate processor • Machine category: Prepress equipment for flexographic printing • Max. plate size: DIN A3 (297 mm x 420 mm) Bwodpfswv Eazox Ab Usk • Application: Processing and developing photopolymer plates • Area of use: Label printing, packaging, flexographic printing • Compact design, ideal for small to medium-sized print shops • Condition: Very well maintained, immediately ready for operation

Condition: used, Name: Dosing system for polymers Manufacturer: Alltech Type: Polymat 1000 V7 KD S Year built: 2003 Content: 1000 Liter Conveying / dosing of: Powdered # Chamber: 2 Control: Yes Driving force: 1: 0,55 kW, 12 0,55 kW Model: Horizontal Dimensions: Length 2000 x width 900 x height 1900 mm Empty weight: 1000 kg Technical doc.: Yes Accessories: Dry material dispenser type T09K0007 Bwjdpfxjvt Sdpo Ab Uok Condition: Second hand Price: On demand

Year of construction: 1998, condition: used, Name: Dosing System For Polymers Manufacturer: PRO-ENTEC Type: RM2 Year built: 1998 Conveying / dosing of: Liquid polymer Performance: 2 - 30 L/h Control: Yes Dimensions: L 1.150 x W 600 x H 1.600 mm Empty weight: 100 kg Technical doc.: No Condition: Second hand Price: On demand Bwjdpoxa Atqsfx Ab Uok

Condition: used, Year of construction: 2007, For enquiries regarding the vehicle, Mr. Seidel (by phone) will be happy to assist you. Polyma LA0400185T68W Light Mast Trailer Rated output: 18 kVA, 14.4 kW / 26A, operating hours: 6,367 h We are happy to provide you with a leasing or financing offer upon request. Mr. Seidel (phone) is happy to assist you. Bwjdpfx Abjyxadgj Usk Further information can be found on our homepage. ... Subject to errors, alterations, and prior sale !!! - = Further information = Unladen weight: 1,660 kg Payload: 40 kg Gross vehicle weight: 1,700 kg Please contact Tobias Ebert for further information.

Condition: excellent (used), Year of construction: 1998, I sell Polymac Rubber edgebander little used, like new. Bwedsuvdzuspfx Ab Usk

Year of construction: 2026, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ Bedpfxofy T H Is Ab Uewk 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, This listing is for a Heidolph Polymax 1040 Platform Shaker The unit is in full working condition and is ready for immediate release. Bwjdpfx Asxxx S Heb Uek The Heidolph Polymax 1040 Platform Shaker is expertly designed to deliver consistent and reliable shaking for a wide range of applications in laboratory settings. From gentle mixing to vigorous shaking, this platform shaker provides the perfect solution for your sample preparation needs. Key Features: - Customizable Speed Settings:Adjust the shaking speed from 2 to 50 RPM, allowing for precise control based on your specific requirements. - Temperature-Controlled Integration:The 1000 series device can be integrated into the incubation system, enabling temperature-controlled applications with the Polymax 1040 for optimal sample conditions. - Large Platform:The spacious platform (40 x 40 cm) accommodates a variety of flask sizes and sample containers, making it versatile for different lab protocols. - Robust Design:Built with a sturdy frame and durable materials, ensuring long-lasting performance even in demanding environments. - Impressive Load Capacity:Designed to handle a load weight of up to 5 kg, accommodating all required samples on this platform wave shaker. - User-Friendly Interface:Intuitive digital display for easy monitoring of speed and time settings, enhancing convenience during operation. - Continuous or Timed Operation:Operate the device continuously or set a timer for up to 120 minutes, providing flexibility for various laboratory processes. - Safety First:Equipped with an overload protection feature that automatically shuts off the shaker if it becomes overloaded, preventing damage to both the shaker and your samples. - Applications:Cell Culture: Ideal for cultivating cells in flasks or plates with consistent agitation. - Chemical Reactions: Perfect for mixing reagents or solutions thoroughly to ensure uniform results. - Sample Preparation: Efficiently shake samples for extraction processes or homogenization.

Condition: used, This listing is for a Heidolph Polymax 1040 Wave Platform Shaker. The unit is in full working condition and is ready for immediate release. Elevate your laboratory's capabilities with the Heidolph Polymax 1040 Wave Platform Shaker, a versatile and reliable solution designed for a wide range of applications, including cell culture, mixing, and incubation. This medium-sized shaker is engineered to provide optimal performance while ensuring gentle and effective agitation for your samples. Key Features: Variable Tilt Angles: Choose between a 5° tilt angle for soft, gentle movements or a 10° tilt angle for more vigorous shaking, accommodating various vessel types such as culture plates, media bottles, and Erlenmeyer flasks. Adjustable Speed Control: Easily set and adjust the speed from 2 to 50 rpm using the intuitive analog control knob, making it ideal for delicate cell culture applications. Temperature Control Compatibility: Designed to work seamlessly with a modular incubator system, the Polymax 1040 supports variable temperature control up to 65 °C, allowing for precise incubation conditions. Technical Specifications: Maximum Load Capacity: 5 kg Shaking Type: Orbital rocking shaker Analog Timer: Set for unattended operation from 1 to 120 minutes, with an acoustic alarm signaling when the time is up. Benefits: Bsdpfx Absxx Ah So Ujwk Unmatched Versatility: The Polymax 1040 can handle a variety of vessels, giving you the flexibility to conduct multiple experiments without limitations. User-Friendly Operation: The straightforward analog controls and timer make it easy to set up and monitor your experiments, ensuring reliable results every time. Robust Design: With a shipping weight of 10 kg and a durable construction, this shaker is built to withstand the demands of everyday laboratory use. Choose the Heidolph Polymax 1040 Wave Platform Shaker for a dependable, high-performance shaking solution that meets the diverse needs of your laboratory. Experience enhanced efficiency and precision in your mixing and incubation processes today!

Condition: new, functionality: fully functional, Year of construction: 2025, Detailed Specification: - Internal dimensions: 5500 × 1500 × 2300 mm (L × W × H) Bwedsxna U Uepfx Ab Ujk - External dimensions: 5700 × 1900 × 2700 mm (L × W × H) - Entrance doors: Double-wing, 1700 × 2300 mm (W × H) - Wall panels: Thickness 100 mm, width 950 mm, tongue-and-groove structure; steel sheet 0.5 mm with mineral wool insulation inside - Box: Panels 100 mm thick, filled with mineral wool - Heating system: RIELLO oil burner model 40G20; heating capacity 200,000 Kcal/h; heat exchanger made of 2 mm stainless steel - Maximum heating output: 200,000 Kcal/h, total 1 set - Roof: Panels 100 mm thick with mineral wool insulation inside - Control system: Heating control, time setting, fault indicator, emergency stop, hour counter, temperature limit regulator, total operating hours display - Total power: 6 kW - Overhead conveyor system: 4 tracks; maximum load 400 kg each We can manufacture ovens of any required dimensions. We provide complete systems including transport traverses, spray walls, and powder coating guns — as shown in the photos.

Condition: excellent (used), Here we offer the BYK Gardner micro-TRI device for measuring surface gloss. Technical data: Gloss: Measuring areas: Bwedpovn Emgefx Ab Uok for high gloss 20° 10 x 10 mm, medium gloss 60° 9 x 15 mm, matt gloss 85° 5 x 38 mm. Measurement time: 0.5 seconds Measuring range: 20° 0 - 2000 GE / 60° 0 - 1000 GE / 85° 0 - 160 GE Repeatability: 0 - 99.9 GE 0.2 GE / 100 - 2000 GE 0.5% Comparability: 0 - 99.9 GE 0.5 GE / 100 - 2000 GE 0.5% Layer thickness: Substrate: Fe magnetic and NFe non-magnetic Measuring range: 0 - 500 µm (0 - 20 mil) Repeatability ± 2% / basic tolerance ± 1.5 (± 0.06 mil)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, turning diameter over cross slide: 755 mm, turning length: 510 mm, turning diameter: 366 mm, spindle bore: 73 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, total height: 2,120 mm, total length: 5,705 mm, total width: 1,922 mm, feed length X-axis: 260 mm, feed length Y-axis: 100 mm, feed length Z-axis: 590 mm, quill travel distance: 564 mm, quill diameter: 80 mm, swing diameter over cross slide: 755 mm, turning diameter over bed slide: 923 mm, type of input current: three-phase, overall weight: 5,700 kg, swing diameter over bed slide: 923 mm, bar passage: 65 mm, bar diameter (max.): 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, 2009 Mori Seiki NL2000Y/500 CNC Lathe in very good condition. Plastics-only medical device use. Y-Axis, live tooling, tailstock, workpiece unloader. Available now in Ireland. Machine Type: CNC Turning Centre with Y-Axis & Live Tooling Manufacturer: Mori Seiki (DMG MORI) Model: NL2000Y/500 Year: 2009 Location: Ireland Availability: Immediate Machine Overview We are pleased to offer this 2009 Mori Seiki NL2000Y/500 CNC Lathe in very good condition, available through Used Machine Tools Ireland. This machine was used only for dry machining of plastics by a medical device manufacturer, meaning: No heavy metal cutting No coolant contamination Exceptionally low mechanical wear The Mori Seiki NL Series is globally recognised as a benchmark for high-precision CNC turning, and the NL2000Y/500 is especially sought after due to its Y-axis capability, live tooling, and BMT (Built-in Motor Turret) design. Key Features & Benefits Y-Axis CNC Lathe – complex milling and turning in one setup BMT Turret Technology – superior rigidity, accuracy, and thermal stability Live Tooling up to 6,000 RPM – ideal for milling, drilling, and tapping Medical / Plastics-Only Use – extremely clean operating history Tailstock & Workpiece Unloader – ideal for automated production MSX-850 III Control – powerful, reliable Mori Seiki control system Technical Specifications – Mori Seiki NL2000Y/500 Capacity Distance Between Centres: 500 mm Chuck : Collet Chuck Max Turning Diameter: 366 mm Standard Turning Diameter: 275 mm Max Turning Length: 510 mm Bar Capacity: 65 mm Swing Over Bed: 923.8 mm Swing Over Cross Slide: 755 mm Axis Travel X-Axis: 260 mm Z-Axis: 590 mm Y-Axis: ±50 mm (100 mm total) Spindle Bedpeyhqkzsfx Ab Uswk Max Spindle Speed: 5,000 RPM Spindle Nose: JIS A2-6 Through-Spindle Bore: 73 mm Spindle Motor: 15 / 15 / 11 kW Turret & Tooling Turret Type: BMT (Built-in Motor Turret) Tool Stations: 16 Max Live Tool Speed: 6,000 RPM Live Tool Torque: 29 Nm Turret Index Time: 0.2 seconds Feed Rates Rapid Traverse (X / Z): 30,000 mm/min Rapid Traverse (Y): 10,000 mm/min Tailstock Tailstock Travel: 564 mm Spindle Diameter: 80 mm Taper: MT4 Live Centre Automation Workpiece Unloader: Yes Max Workpiece Diameter: 80 mm Max Workpiece Length: 200 mm Max Workpiece Weight: 3 kg Electrical & Dimensions Power Requirement: 31.5 kVA Machine Dimensions (L × W × H): 2705 × 1922 × 2120 mm Machine Weight: 5,700 kg Included with Machine ✔ Selection of axial & radial driven toolholders ✔ Selection of static toolholders ✔ Extraction unit for plastic machining Additional Notes Used exclusively for dry plastic machining No coolant system fitted, however the machine is prepared for coolant installation and can be added at cost Specifications provided in good faith but not guaranteed Ideal Applications Medical device manufacturing Plastic & polymer machining Precision CNC turning & milling Aerospace, electronics & high-tolerance components This Mori Seiki NL2000Y/500 CNC Lathe represents a rare opportunity to acquire a premium Japanese turning centre with an exceptionally clean usage history.

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder Werner & Pfleiderer / Coperion ZSK 83 For sale is a ZSK 83 twin-screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly maintained. Technical details: • Model: ZSK 83 • Screw system: Co-rotating twin-screw • Motor power: 46 kW • Barrel: Water-cooled • Degassing zone: available • Dosing unit: included (as seen in the photos) • Spare screw elements: available • Control system / control cabinet: in good condition, fully functional General information: Bwodjx Dkmgspfx Ab Uek This line is ideally suited for compounding, masterbatch, recycling, polymer, and filler applications. The extruder has been overhauled as needed and technically inspected. Inspection and test run on site possible by arrangement. Worldwide transport possible. If interested, please get in touch—further photos, datasheets, and videos are available.

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 250 mm, spindle speed (max.): 18,000 rpm, number of axes: 3, This 3-axis PELCO MECCANICA CLOUD was manufactured in 2015. It features a working area of 2000 × 1000 mm and a Z-axis travel of 250 mm. The machine is equipped with a 12-position tool changer and an electrospindle speed ranging from 2000 to 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the PELCO MECCANICA CLOUD CNC router we have for sale. Contact us for further details. • Suitable materials: wood, PVC, plexiglass, polycarbonate, polymers, high-density polyurethane (model making), soft metals • Applications: fast interpolations ideal for 3D machining, cutting, shaping • Feed rate (interpolated): 10 m/min • Tool changer: 12 positions, ISO20 • Electrospindle speed: 2000–18,000 rpm • Controls: handwheel for precise positioning; handwheel for feed rate adjustment during machining • Coolant: prepared for mist cooling system (unit not included) • Certification/year: CE, 2015 • Power supply: 400 V, 3-phase + neutral • Power consumption: 3.5 kW • Compressed air requirement: minimum 6 bar Bedpfx Aboywk Nko Ujwk Additional equipment • Tool length preset probe • Chip collection tray/conveyor under the table with extraction outlet

Condition: used, mileage: 227,000 km, power: 265 kW (360.30 HP), first registration: 04/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: red, gearing type: mechanical, emission class: euro5, Year of construction: 2013, Equipment: ABS, air conditioning, parking heater, Manufacturer MAN Model TGS 26.360 6x4H?4 Simon Moos KSA VacuDrain Year 2013 Condition Good Serial Number WMA35SZZXDM618777 Ref. nr. 1017672 Reg. date: Hk: 360 Km: 227000 Gearbox: Manual Eurotype: 5 Diesel tank: 1 Tank liter: 400 L Rear view camera: ? Air conditioning: ? Radio: ? Refrigerator: ? Disc brake: ? Bwodpfxsu A Hnxe Ab Uok ABS: ? Engine brake: ? Tire Size: 385/65R22.5 - 315/80R22.5 - 385/65R22.5 Cover% left 50% 50% 50% Front suspension: Feather Suspension rear: Air Toolbox: ? Hydraulic system: ? Total weight: 26000 Kg Net weight: 17735 Kg Load capacity 8265 Kg Manufacturer: Simon Moos KSA 1275 Type 1 High pressure pump: Pratissoli KF36 High pressure capacity: 120 l/min - 120 bar High pressure pump hours: 204 Vacuum pump: Samson V15 (KS725) Vacuum capacity: 900 m3/h Vacuum pump timer: 3157 Sludge pump: Allweiler AEB 1L 551 Sludge pump capacity: 30 m3/h Sludge pump hours: 2397 Polymer pump: Allweiler SNP 25.1 Polymer pump capacity: 2.4 m3/h Polymer pump hours: 2347 Remote control: ? Water heater: ? Tank capacity sludge tank: 4900 L Tank capacity drainage tank: 8400 L Tank capacity polymer tank: 1700 L Tank capacity reject water tank: 3600 L Suction hose 3" 1x30m + 2x15m Flush hose: 1x80m + 1x8 m - 1/2"

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: EX30, We have designed our compact extruder model EX30-28d so that it can be used in all extrusion processes. We offer this extruder as co-extruder or laboratory extruder, as well as for the extrusion of welding wire, filament, solid rods, hoses, or for pelletizing with hot die or strand pelletizer. We also realize other machine dimensions, please contact us. Bedpfx Absby Rfps Ujwk Our standard extruder with nitrided screw and barrel covers most polymer raw materials. Optionally, we also offer this extruder with wear-resistant screw and barrel, for example: for PEEK, titanium, ceramics, etc.

Year of construction: 2004, condition: not inspected (used), functionality: unexamined, machine/vehicle number: P04/034, EREMA SW4/134 RTF Screen Changer - Continuous partial area backflush filter with 2 carrier pistons (4 screens) for heavily contaminated polymers - Minimal pressure differentials during backflushing or screen change - Melt filter system meets the highest demands for fine filtration, distinguished by robustness, high degree of automation, maximum availability, and improved melt homogenization main unit only, without accessories, suitable as a spare parts donor Bodpfx Absyymaqs Uewk

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Scodix S Series™ Digital Enhancement Presses Product Specifications Printing technology UV based inkjet Resolution Up to 2,540 x 360 DPI Variable data PDF, Optimized PDF, Optional Barcode system Supported image standards Standard PDF Camera based Registration (OPA) ±200 micron image to image Communication protocol Hot Folder, LAN Substrates * Offset, Digital, Laminated substrates Substrates loading sizes Minimum L297 x W420 mm / 11.7 x 16.5 in S52 – Maximum – L353 x W520 mm / 13.9 x 20.4 in S75 – Maximum – L520 x W735 mm / 20.4 x 28.9 in Printing Image size (with OPA marks) S52 – Maximum – L341 x W516 mm / 13.4 x 20.3 in S75 – Maximum – L508 x W731 mm / 20 x 28.8 in Polymer Scodix PolySENSE™ Clear Polymer Polymer layer thickness Bwjdpfsyya A Ssx Ab Uok Up to 250 microns Substrates input system Automatic feeder Substrates output systems Automatic Production stacker, Basic stacker unit Substrates weight 135 - 675 gsm / 6 - 30 points Substrates thickness Up to 0.7mm / 700 micron Air requirements Air Flow: 10 CFM. Between 6-8 bar - regulated Additional software Internal RIP, Software Editor Presses dimensions (L x H x W) Scodix S52 - 3793 x 1883 x 2576 mm / 150x 75 x 102 in Scodix S75 - 4753 x 1883 x 2576 mm / 187 x 75 x 102 in With Basic / Production stacker unit Operating environment Temperature: 15ºC to 30ºC (59ºF - 86ºF) Humidity: 40% to 80% relative humidity, non-condensing Electrical requirements Voltage: 400 VAC, + 10% 3 Phases Frequency: 50 to 60 Hz Current: Avg. 20 Amps in Print mode Power consumption: Avg. 8 kVA in print mode Circuit Breaker: 32 Amps Presses weight Scodix S52 – Net: 2,390 kg / 5,269 lbs Scodix S75 – Net: 2,905 kg / 6,404 lbs * Based on the Scodix recommended list of materials. For expected Scodix SENSE™ quality, surface tension should be within the range of 36-44 dyne/cm. Depends on print mode and substrate.

Condition: used, Year of construction: 1994, Available from May Name: Used mobile sludge dewatering system in container Manufacturer: Alfa Laval Type: AVNX 919 Year built: 1994 Max. bowl speed: 3.250 rpm Material: Stainless steel Inner diameter drum: 353 / 202 mm Permissible sediment density: 1,2 kg / dm3 Dimensions: L 7.500 x W 2.450 x H 2.550 mm Empty weight: Approximately 6-7 tons Technical doc.: Yes Message: Available from May Bjdpfoyxl R Eex Ab Ujwk Accessories: Container, polymer plant, feed pump, control cabinet, macerator, discharge conveyor Condition: Second hand Price: On demand