Used Used Power Cables for sale (66,502)

Condition: used, ALKO clean air extraction unit, Power Unit 200P - used Air filtration using filter hoses, Cleaning performed pneumatically, Dust-tested, Mobile collection container ----- Technical data ----- Extraction nozzle diameter: 200 mm, Nominal air flow rate: 2,261 m³/h, Maximum negative pressure: 2,174 Pa, Number of bags: 2, Cedpoy T Ebgofx Albogu Motor: 3 kW, Compressed air connection: 6 bar, Dimensions (L x W x H): 2,300 x 850 x 2,050 mm, Weight: 470 kg

Condition: good (used), Cable reel, cable unwinder, power cable reel, cable reel, workshop reel, cable drum, wall cable drum, workshop cable drum, wall reel Cgedpot Uwx Dofx Albou -Manufacturer: Zeca, cable drum cable reel -Cable: 12-core, length: 50 m -Hole diameter: 180 x 10 mm -Dimensions: 715/480/H800mm -Weight: 73 kg

Condition: used, Cable reel, Cable reel, Power cable reel, Cable reel, Workshop reel, Cable drum, Wall cable drum, Workshop cable drum, Wall reel -Cable reel Cgedped S D Dqefx Albju -Drum: Ø 300/160 mm -Weight: 11 kg

Condition: used, Power cables, solar cables, fiber optic cables, fiber optic cables, data cables, LAN cables, fiber optic cables Cgodpfx Aef T Splelbeu -Core cable: stranded wire 1 x 10 mm flexible, finely stranded -Length: 16 m -Dimensions roll: Ø 500 x 415 mm -Total weight: 16 kg

Condition: used, Cable reel, cable reel, power cable reel, cable reel, workshop reel, cable reel, wall cable reel, workshop cable reel, wall reel Cgsdpfsd Tq Rvox Albeu -DR Italia: power cable reel -with cable: 7G 1.0 length: 13 m -Dimensions: 340/400/H400 mm -Weight: 15.5 kg

Condition: new, functionality: unexamined, Year of construction: 2024, machine/vehicle number: 16.41-PS0382, control type: CNC control, degree of automation: automatic, actuation type: electric, sheet thickness (max.): 8 mm, input voltage: 400 V, input current: 20 A, type of input current: three-phase, 2024 Pima Power PS 1225 Brand new Complete machine. Machine was tipped on its side during transit and was damaged. Machine is stored in Our warehouse in California USA. Contact to set up in person inspection. Csdpow Nbh Hsfx Albogu

Condition: like new (used), For sale is a used Record Power bandsaw with a cutting width of 292 mm. The bandsaw is in like-new condition and was used for testing purposes in our workshop. Technical specifications: - Cutting width 292 mm - Cutting height 254 mm - Table size 480x400 mm - Dust extraction port Ø 100 mm - Motor power 1.1 kW / 1.5 HP - Year of manufacture 2025 - Includes fine cutting adjustment - Includes feed mechanism The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Bandsaw, saws, saw, band Cgedpfxezar R Ts Albsu Reference: R-A0117

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 23087A, SPECIFICATION Maximum grinding surface 140 x 300mm Distance between column and wheel axis 300mm Cedpfjvntgujx Albogu Max.distance between table and wheel 280mm Rapid feed per turn of handwheel 2mm Micrometric feed by small handle 0.01mm Size of cup wheel 2.2kW Wheel speed 2840rpm Approximate weight 400kg MACHINE EQUIPPED WITH 260mm x 140mm x75mm (thickness) magnetic chuck Coolant system Guarding

Condition: good (used), functionality: fully functional, Year of construction: 2018, Travel ranges: X/Y/Z: 3,048 x 1,524 x 150 mm Laser: CV-5000 (CO²) Operating hours: approx. 9,000 h Cutting head with lens: 5´ / 7.5´ / 9´ Control system: Prima Power NC Expressw e³ Laser Classic Pallet changer: Prima Power/OMS Sordella, max. 3,300 kg Csdpfx Alszbxn Uebogu Extraction system: Donaldson 2DFP4-SPRK, 2,400 m³/h Cooling system: Hyfra Sigma 67-S Equipment: Sheet metal recognition, oil mist lubrication system, plasma monitoring, laser piercing monitor (LPM), pallet changer with light barriers, machine enclosure.

Condition: excellent (used), TEST MACHINE For sale is a like-new Record Power PT310 surface planer/thicknesser with a planing width of 310 mm. The machine has been refurbished by our service team and is in very good condition. Technical data: - Spiral cutterblock - Planing width 310 mm - Planing length 1420 mm - Max. feed height 230 mm Cjdpfoy U Inljx Albsgu - Dust extraction port Ø 100 mm - Motor power 2.2 kW / 3 HP - Incl. feed mechanism - Year of manufacture 2025 - like new The planer/thicknesser is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: surface planer, thicknesser, planer, surfacing, thicknessing Reference: R-A0117

Condition: excellent (used), Year of construction: 2011, Sheet metal format: 3000x1500 mm Cgjdsxxkm Nspfx Albju Axes X/Y/Z: 3065/1560/150 mm Price on request.

Condition: good (used), Lifting capacity 3.5 T Cjdpfjtt T Idsx Albsgu Year of manufacture 2010 14921 h Isuzu diesel engine Fully operational I have 2 pieces

Year of construction: 2009, condition: ready for operation (used), - USED - ELECTRICAL AUTOMATIC PANEL BENDER FOLD LENGTH: 2150 mm MAX FOLD HEIGHT: 200 mm MIN LENGTH/WIDTH BETWEEN FOLDS: 160-350 mm TONNAGE: 32 ton CONTROL UNIT: SIEMENS 840D WEIGHT: 30000 Kg Cgsdjy T Szyepfx Albou OVERALL DIMENSIONS: 8500 x 7000 x 2850 mm ACCESSORIES: AUTOMATIC TOOL CHANGE ; MANIPULATOR ; REVERSE BENDING CYCLE ; SHEET METAL CENTERING SYSTEM NOTE: NO 2 ASP/700 CNC AUXILIARY AXIS; ADDITIONAL UPPER TOOL; LOADING/UNLOADING SYSTEM

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 1,550 kg, fuel type: diesel, color: yellow, power: 80 kW (108.77 HP), output current: 144 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 80 kW (108.77 HP), nominal power (apparent): 100 kVA, continuous power: 80 kW (108.77 HP), continuous power (apparent): 100 kVA, total length: 2,900 mm, total width: 1,150 mm, total height: 1,600 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yunnei EURO 5, type of cooling: water, HELVETICA POWER offers: 100 KVA generator with 100% copper alternator, digital control, and ATS unit for emergency power operation. Remote control is built-in. CE-certified Yunnei Stage V diesel engine suitable and approved for continuous operation in accordance with applicable emissions standards. Stamford type: CE-certified quality brushless synchronous alternator with 100% copper winding! Delivery (surcharge) possible worldwide. Optional: Looking for something else? More or less kW, a different engine (Cummins, Deutz, Volvo, etc.), a larger tank, an additional tank - contact us. We can also customize your generator. Cgsdpfx Alomw Unkjbsu Pickup: from our warehouse in Konstanz (Germany) or Kefikon (Thurgau). Delivery is available. Worldwide delivery is possible. Dealer inquiries welcome - please contact us. We have various emergency power generators (from 7 kW to 100 kW) available from stock in Switzerland and Germany. We also have various power generators with STAGEV engines in various sizes available from stock in Switzerland and Germany.

Condition: good (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 84.5 kW (114.89 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,016 kg, input voltage: 400 V, total width: 1,200 mm, total length: 2,830 mm, total height: 1,800 mm, warranty duration: 6 months, heating capacity: 92 kW (125.09 HP), Aircooled chiller/Heat pump DAIKIN EWYQ085G XR036 84.5 kW / 92 kW Cooling capacity: 84.5 kW / 24.03 tons (12/7 — 35°C) Heating capacity: 92 kW / 26.16 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Copeland ZP235KCE-TWD-522 (scroll) + 1 pcs. Copeland ZP182KCE-TFD-477 (scroll) Cgedpfx Alezbqqbjbou Type of refrigerant: R410a Number of fans: 6 pcs . Hydraulic module: 2 pcs. water pump Lowara CIE370/1V/D. Dimensions: 2.83x1.2x1.8 m Weight: 1016 kg Working hours: 10380/468 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: NX1102193, SPECIFICATION Table size 1244 x 230mm Longitudinal traverse 700mm Csdpfx Aljy S Shwsbogu Cross traverse 300mm Vertical traverse 405mm Quill travel 125mm Quill feeds 0.045-0.086mm/rev Quill diameter 86mm Quill taper R8 Spindle motor 2.2kW Spindle speeds (inf. Variable) 50-3500rpm Weight 1200Kg Machine in Metric execution MACHINE EQUIPPED WITH Sino 3 axis DRO system Longitudinal power feed One shot centralised lubrication system Low voltage halogen worklight Spindle guard Coolant system

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,003 h, This Finn-Power TRS 6 SUV was manufactured in 2003. A robust CNC punching and shearing machine, it features a punching force of 300kN and shearing force of 250kN. It includes a turret with 20 tool positions and optional a sheet metal storage capable of handling 40 pallets. Ideal for high-quality punching capabilities. Contact us for more information. Cjdpfx Asx D H Dbelbogu Additional information • Punching Force: 300 kN • Shearing Force: 250 kN • Various spare parts • Weight: 22000 kg • Optional: Sheet Metal Storage: 40 pallets, 3000 x 1500 x 150 mm

Condition: good (used), functionality: fully functional, Year of construction: 2000, Equipment: CE marking, PLS2500 2D laser with 2 x cutting table with usable area: 3140 x 1640 x h100mm, Axis stroke 3000x1500x150mm (XYZ), Cgjdpfexx R A Dsx Albou Maximum speed linear axes 40m/min (XY) and 20m/min (Z), Neck LGL France type NLEX 35, Sideros Engineering dust extraction system 3000W CO2 laser source DOCUMENTATION AVAILABLE. Machine dismantled and prepared for loading. It was in perfect working condition. Special price for immediate purchase.

Condition: good (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 95 kW (129.16 HP), type of input current: three-phase, type of cooling: water, overall weight: 729 kg, input voltage: 400 V, total width: 920 mm, total length: 2,430 mm, total height: 1,060 mm, warranty duration: 6 months, heating capacity: 130 kW (176.75 HP), WATERCOOLED CHILLER/HEAT PUMP DAIKIN EWHQ120G 95/130 kW Cooling capacity: 95 kW - 27 ton (12/7°C — 35°C) Heating capacity: 130 kW - 36.9 ton (40/45°C - 7°C) Year of manufacture: 2019 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Options: Heat pump Type of refrigerant: R410A Compressors: 2 pcs. Copeland(scroll) Dimensions: 2,432 х 0,928 х 1,066 m. Weight: 729 kg. Working hours: 11437 / 4712 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. Cjdpey U U Tujfx Albegu The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 873 kW (1,186.95 HP), type of input current: three-phase, type of cooling: air, overall weight: 9,880 kg, input voltage: 400 V, total width: 2,260 mm, total length: 9,400 mm, total height: 2,430 mm, warranty duration: 6 months, Aircooled chiller Climaveneta FOCS-CA/SL 873 kW Cooling capacity: 873 kW (12/7 — 35°C) Year of manufacture: 2009 Heat exchanger: Shell and tube Refrigerant circuit: 2 pcs. Type of refrigerant: R134a Compressors: 2 pcs. Bitzer (screw) Number of fans: 12 pcs. Dimensions: 9.40 x 2.26 x 2.43 m Weight: 9 880 kg. Working hours: 30717/30184 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Codpfxoy U U Hhj Albogu Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2014, functionality: fully functional, cooling capacity: 32.3 kW (43.92 HP), type of input current: three-phase, type of cooling: air, overall weight: 394 kg, input voltage: 400 V, total width: 1,250 mm, total length: 1,060 mm, total height: 1,800 mm, warranty duration: 6 months, AIRCOOLED CHILLER TRANE 32,3 KW Cgedpsy U Uyzefx Albju Cooling capacity: 32,3 / 9,2 tons kW (12/7 — 35°C) Year of manufacture: 2014 Refrigerant circuit: 1 pcs. Type of refrigerant: R-407C Compressors: 1 pcs. Danfoss (scroll) Heat exchanger: Plate Hydraulic module: water pump, buffer tank, expansion vessel Number of fans: 1 pcs. Dimensions: 1.06 x 1.25 x 1.80 m Weight: 394 kg Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2015, functionality: fully functional, cooling capacity: 486 kW (660.78 HP), type of input current: three-phase, type of cooling: air, overall weight: 8,234 kg, input voltage: 400 V, total width: 2,500 mm, total length: 12,000 mm, total height: 2,300 mm, warranty duration: 6 months, Aircooled chiller SWEGON COBALT PRO SLN 58.2 FC 486 KW Cooling capacity: 486 kW / 138.19 tons (12/7 — 35°C) Year of manufacture: 2015 Options: Freecooling (370 kW) Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum + Copper / Aluminum (Freecooling) Compressors: 1 pcs. Bitzer CSH9563-160Y-40D (screw) + 1 pcs. Bitzer CSH8593-140Y-40D (screw) Type of refrigerant: R1234ze Number of fans: 20 pcs. (EC-fans) Dimensions: 12x2.5x2.3 m. Weight: 8234 kg. Cjdpsy U Uvpefx Albsgu Working hours: 13200/18920 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 47,813 h, machine/vehicle number: 302C104, control type: CNC control, degree of automation: manual, actuation type: electric, laser type: CO₂ laser, laser source manufacturer: Prima Power, laser source model: CP 4000, laser hours: 42,420 h, laser power: 4,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, table length: 3,000 mm, table width: 1,500 mm, type of cooling: water, overall weight: 15,000 kg, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, fume extraction, We are offering this used Prima Power Zaphiro 1530 laser cutting machine, manufactured in 2010. Cgsdpfsy Umv Uox Albeu The machine was last operated as a standalone unit and is still functional. The PC and software are already running under VM Ware. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2016, For sale: Prima Power BCe Smart 2220 (2016) panel bending machine. Main advantages: Servo-electric technology – up to 60% lower energy consumption and up to 70% lower maintenance costs High bending quality and precision Compact layout, operator-friendly design Semi-automatic operation, manual sheet loading/unloading Equipped with a safety system: laser scanners, light curtains Cedpfx Aljxfiw Tsbogu Technical specifications: Max. bending length: 2250 mm Max. sheet length: 2850 mm Max. sheet width: 1500 mm Max. panel diagonal: 3000 mm Max. bending height: 204 mm Bending force: 32 t (320 kN) Pressing force: 52 t (510 kN) Processable steel thickness: up to 3.0 mm Minimum thickness: 0.5 mm Average power consumption: 4.0 kWh Additional equipment and features: Software: Master BendCam 2D, Tulus HMI Tool library, visual simulation of the bending process Remote diagnostics, user-friendly control interface Lowerable work surfaces – convenient parts handling Year: 2016 Condition: Used, well-maintained, connected, can be seen in operation. If you have any further questions, we will be happy to answer them.

Condition: ready for operation (used), Year of construction: 2010, overall weight: 23,000 kg, punching force: 31 t, controller manufacturer: SIEMENS, sheet thickness (max.): 6 mm, number of axes: 11, This 11-axis Finn-Power SG6 12.61 was manufactured in 2010. It features a maximum punching force of 300 kN and can handle sheet thicknesses up to 6 mm. The machine includes a thick turret with 20 stations and an integrated CNC right-angle shear for efficient part separation. If you are looking to get high-quality punching capabilities, consider the Finn-Power SG6 12.61 punching and bending machine we have for sale. Contact us for further details. • Max. punching diameter: approx. 88.9 mm (in 3 mm steel) • Punching speed: up to 600 hpm (short pitch) • Positioning accuracy: ±0.1 mm • Max. sheet size: 1500 x 2500 mm • Automatic repositioning: yes, via CNC clamps • Number of clamps: 2 (with intelligent repositioning) Cgsdpfoy H Iluex Albeu • Loading/unloading capability: manual or automatic (configuration dependent) • Turret: Thick Turret / Trumpf style • Number of stations: 20 • Integrated shear: CNC right-angle shear • Shearing capacity: up to 6 mm (mild steel) • Process advantage: part separation without micro-joints or secondary operations • Edge quality: superior to traditional nibbling • Control unit: Finn-Power / Siemens • Software: NC Express / Tulus • Functions: automatic nesting; optimized punching and shearing sequences • Diagnostics: self-diagnostics and assisted maintenance