Used Used Power Cables for sale (73,946)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Mechanical cutting device Nledpfx Aezy Ndcofusg Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Hydraulic cylinders Number of hydraulic cylinders: 8 Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Hydraulic motors Number of hydraulic motors: 4 Type: OMP 50 MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Frequency: 50 Hz EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. 4 hydraulic motors OMP 50 Gear pump CPL 9 DQ Valve block with hydraulic valves Return filter Fill and vent filter Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Hydraulic and electrical circuit diagrams

Condition: used, Year of construction: 2024, operating hours: 53 h, functionality: fully functional, overall weight: 1,550 kg, fuel type: diesel, color: yellow, power: 80 kW (108.77 HP), output current: 144 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 80 kW (108.77 HP), nominal power (apparent): 100 kVA, continuous power: 80 kW (108.77 HP), continuous power (apparent): 100 kVA, total length: 2,900 mm, total width: 1,150 mm, total height: 1,600 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yunnei EURO 5, type of cooling: water, HELVETICA POWER offers: 100 KVA generator with 100% copper alternator, digital control, and ATS unit for emergency power operation. Remote control is built-in. CE-certified Yunnei Stage V diesel engine suitable and approved for continuous operation in accordance with applicable emissions standards. Stamford type: CE-certified quality brushless synchronous alternator with 100% copper winding! Delivery (surcharge) possible worldwide. Optional: Looking for something else? More or less kW, a different engine (Cummins, Deutz, Volvo, etc.), a larger tank, an additional tank - contact us. We can also customize your generator. Pickup: from our warehouse in Konstanz (Germany) or Kefikon (Thurgau). Delivery is available. Worldwide delivery is possible. Dealer inquiries welcome - please contact us. We have various emergency power generators (from 7 kW to 100 kW) available from stock in Switzerland and Germany. We also have various power generators with STAGEV engines in various sizes available from stock in Switzerland and Germany. Nedszwf Apspfx Afujlg

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 82397, type of input current: three-phase, welding current (max.): 420 A, Equipment: type plate available, MERKLE Insquare W 421 AC/DC water-cooled TIG welding system Nledpfjzamffox Afusg Manufacturer: MERKLE Model: Insquare W 421 AC/DC Year of manufacture: 2012 Serial number: 82397 Description For sale is a powerful AC/DC TIG welding system from MERKLE with water cooling. This system is suitable for professional welding applications on steel, stainless steel, aluminum, and other non-ferrous metals. The AC/DC technology allows for both DC and AC welding, covering a wide range of applications. With a welding current of up to 420 A, the system is ideal for industrial use in metal, tank, plant, and pipeline construction. The water cooling ensures continuous and reliable operation, even at high welding currents. Technical data Manufacturer: MERKLE Type: Insquare W 421 AC/DC Year of manufacture: 2012 Welding current range: 5 – 420 A AC frequency: 50 – 200 Hz Open-circuit voltage: 80 V Mains connection: 400 / 415 V, 50 / 60 Hz, 3~ Duty cycle at 40 °C: 420 A at 40 % 360 A at 60 % 310 A at 100 % Protection class: IP23 Water cooling Standard: EN 60974-1 Scope of delivery MERKLE Insquare W 421 AC/DC Water cooling TIG torch Ground cable Foot pedal All information is subject to change without notice.

Condition: used, Year of construction: 2016, operating hours: 762 h, functionality: fully functional, machine/vehicle number: 10022447, overall weight: 665 kg, load capacity: 30 kg, arm reach: 2,033 mm, KUKA KR 30-3 robotic workstation with KRC4 controller and SmartPad. Operating time: only 762 hours. For sale: a complete robotic workstation based on the KUKA KR 30-3 industrial robot, equipped with a KRC4 controller and a KUKA SmartPad operator panel. The unit comes from a research and development laboratory and was used for testing and industrial automation projects. As a result, the robot has very low operating hours, totaling only 762 hours. This workstation is an ideal solution for system integrators, technical universities, R&D departments, and companies implementing automation and robotics solutions for processes. Nlodpfeziciwex Afusg Technical data: Manufacturer: KUKA Model: KR 30-3 Year of manufacture: 2016 Payload: 30 kg Reach: 2033 mm Controller: KUKA KRC4 Operator panel: KUKA SmartPad Operating time: 762 h Controller power supply: 3x400 V Installed software options: EthernetKRL Profinet KRC-Nexxt RemoteService RobotSensorInterface Technical condition: The robot starts up correctly, and communication with the controller works properly. The visual condition is very good. The unit comes from a research and development project and has not been used in continuous industrial production. Included: KUKA KR 30-3 robot KRC4 controller KUKA SmartPad operator panel Cabling as shown in the pictures Additional information: The workstation can be expanded with: - pneumatic or electric grippers, - vision systems, - safety fences, - safety gates, - light curtains, - additional industrial automation equipment. More products are available at tobesold.eu. Before shipment, the unit undergoes technical verification. A demonstration of the unit's operation is available by prior appointment.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 18166, pressing force: 38 t, total width: 2,500 mm, total height: 2,500 mm, total length: 6,900 mm, type of input current: three-phase, input voltage: 400 V, input current: 32 A, overall weight: 15,000 kg, oil tank capacity: 60 l, empty load weight: 5,350 kg, input frequency: 50 Hz, Equipment: documentation/manual, Avermann MPC 20 P/E/L/W – 20 m³ | Double-sided cable & hook connection | Extra-large feed opening For sale: Avermann MPC 20 P/E/L/W compaction container, year of manufacture 2012, with a capacity of 20 m³. This robust Avermann compaction container stands out due to its very large feed opening – the largest in its class. This allows larger and bulkier waste streams to be easily and quickly fed into the container. The feed opening is equipped with two separate lids that can be opened sideways, ensuring that the opening remains easily accessible and the machine can be used flexibly. In addition, this compaction container can be connected on both sides and is suitable for both cable and hook connections. This makes the machine particularly practical when different transport and removal systems are used. Njdpfez Ep R Djx Afuslg The machine is heavy-duty and suitable for professional use in various sectors, including industry, logistics, manufacturing, distribution, recycling, and waste processing. Technical specifications: Brand: Avermann Type: MPC 20 P/E/L/W Year of manufacture: 2012 Serial number: 18166 Capacity: 20 m³ Power supply: 3 x 400 V + N + PE, 50 Hz Power: 5.5 kW Fuse rating: 25 A Protection class: IP54 Max. working pressure: 200 bar Own weight: approx. 5,350 kg Permissible total weight: 15,000 kg Double-sided connection Suitable for both cable and hook connections Two sideways-opening lids on the feed opening Very large feed opening – the largest in its class Special features: Thanks to the very spacious feed opening, this compaction container is ideally suited for feeding in larger quantities and bulky materials. The two separate, sideways-opening lids ensure that the feed opening can be easily made fully accessible. The combination of double-sided connection and both cable and hook connections also makes this machine particularly flexible for transport and emptying. The machine is in used condition and shows signs of wear and tear, as can be seen in the photos. Technically, it is a well-built, industrial Avermann compaction container with a generous capacity of 20 m³. Inspection and testing are possible by appointment. Please feel free to contact us for more information, price, or technical questions. Keywords: Avermann, AVOS, MPC20, MPC 20, MPC 20 P/E/L/W, 20m3 compaction container, compaction container, waste compactor, container compactor, double-sided connection, cable connection, hook connection, removal compactor, waste compaction, recycling, compactor, large feed opening.

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25667, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Nedpfxoy Tybnj Afuolg Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2016, laser type: fiber laser, laser power: 4,000 W, input voltage: 220 V, Equipment: CE marking, Manufacturer: FANUC Corporation Model: FF4000i-A Machine type: Fiber laser Laser power: 4 kW Laser technology: Fiber laser Nlodpfx Afjz Dk U Ususg Manufacture date: June 2016 Power supply: 200 V / 220 V Frequency: 50 / 60 Hz Rated power: 28 kVA Rated current: 16 A Short-circuit current: 5 kA Country of Manufacture: Japan Accessories: Transformer FANUC LX80L-0003-0611 Transformer power: 30 kVA Primary voltage transformer: 400 V ±5 % Secondary voltage transformer: 200 V Transformer frequency: 50 / 60 Hz Transformer weight: 125 kg Standard: EN61558-2-13 Scope of delivery: Laser source, transformer, two fiber optic cables Location: Fulda The laser has only been used as a demonstration unit at a trade fair in 2018, therefore very few operating hours.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Mobile dust extraction unit AL-KO Mobil-Power-Jet 100 for use with woodworking machines. This compact dust extraction system is designed to be mobile and is suitable for extracting wood dust and chips directly at the machine. The rollers allow the unit to be used flexibly in different work areas. Technical data / Features Manufacturer: AL-KO Type: Mobil-Power-Jet 100 Year of manufacture: 2009 Manufacturer’s serial number: 2433338514 Item number: 195 426 Nominal volume flow: 700 m³/h Minimum volume flow: 565 m³/h Suction nozzle: Ø 100 mm Motor power: 0.75 kW Voltage: 230 V / 50 Hz Nominal speed: 2,850 rpm Nominal current: 4.85 A Protection class: IP54 Negative pressure: approx. 1,020 Pa Njdpfx Aszzadcefuolg Dust class: M Mobile / can be moved on rollers The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Transportation is possible for an extra charge! Technical data and features may vary. Errors, prior sale and changes are subject to confirmation. All information is provided without guarantee.

Condition: good (used), Year of construction: 2003, operating hours: 19,200 h, functionality: fully functional, We are offering a DUS 800 ti turning machine manufactured by Boehringer—built in 2003. The machine has been used in single-shift operation up to now. As shown in the photos, the machine is being sold with additional equipment (steady rest, tailstock, 800 mm faceplate with jaw sets, jaws for a 500 mm chuck, and size 4 tool holder). Manuals for the machine are available. The DUS 800 ti is in fully functional condition and is available immediately. Nljdpfxoz D Uqyj Afujg An inspection of the machine on power is possible at any time. Please refer to the attached document for technical specifications. The sale is on an “bought as seen” basis without warranty, Incoterms 2020 “EXW” Heubach, Germany. Responsibility for disassembly and loading on truck by buyer. The seller may provide assistance. Inspection and delivery date by arrangement.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 2123083B, total height: 560 mm, total width: 500 mm, total length: 580 mm, input voltage: 230 V, temperature: 1,600 °C, input current: 25 A, input frequency: 50 Hz, overall weight: 65 kg, Professional Schultheiss VPC 040 power induction casting machine, manufactured in Germany. High-performance, compact benchtop unit designed for producing top-quality, high-detail castings in gold, silver, and other precious metal alloys. Nodpfx Aey Tbfzofuolg The "Power" version offers increased capacity and faster cycle times compared to the standard model. It features a fully automated, one-button vacuum and pressure application system to ensure exceptional alloy homogeneity and minimal porosity. Key Features: - Fully Automatic Control: 12-step digital casting programs for consistent results. - Advanced Induction Technology: Fast, gentle heating with a mixing booster effect. - Single Phase Convenience: Operates on standard 230V power. - Versatile: Capable of handling fine filigree details and larger solid pieces. Technical Specifications: - Manufacturer: Schultheiss GmbH (Germany) - Type: VPC 040 Power - Year of Manufacture: 2013 - Serial Number: 2123083B - Max. Temperature: Up to 1,600°C - Max. Flask Size: Ø 100 mm x 120 mm - Power: 5 kVA / 25 A (Single Phase, 230V) - Dimensions: 500 x 580 x 560 mm - Condition: Used, visually excellent and clean. Rear ports include Water Inlet/Outlet, Vacuum, and Pressure Gas.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 6,300 h, machine/vehicle number: P7.02.00.03, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: CO₂ laser, laser hours: 6,300 h, table length: 3,000 mm, table width: 1,500 mm, power: 3 kW (4.08 HP), type of cooling: water, Prima Power Platino 1530 Laser Cutting Machine for Sale We are offering for sale a Prima Power Platino 1530 laser cutting machine, manufactured in 2017. The machine is in excellent working condition and is currently still in operation. The only reason for the sale is the arrival of a new machine. This laser was purchased new by our company and has been used exclusively for our own production. It has been regularly serviced and carefully maintained throughout its lifetime. Current machine hours: 19,900 power-on hours 6,300 cutting (working) hours It operates flawlessly, has been extremely reliable over the years, and remains in excellent overall condition. Nlsdpfx Aszlfmdefujg If you require any additional information or would like to arrange an inspection, please feel free to contact us.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: AFMAAAABABAA+, The Coriolis Mass Flowmeter Proline Promass 83F, manufactured by Promass in 2011, is a precision instrument designed for accurate mass flow measurements in various industrial processes. This model, designated as 83F1H-3967/0 with serial number E710E302000, has a nominal size of DN100 (4 inches) and is equipped with a hygienic process connection DN100 DIN 11851, making it suitable for applications requiring sanitary standards, such as dairy processing. Constructed from high-grade stainless steels 1.4404/316L and 1.4539/904L, the device offers durability and corrosion resistance. It is rated for a nominal pressure (pnom) of 25 bar and operates in a process temperature range from -50°C to +200°C, with an ambient temperature tolerance from -20°C to +60°C. The flowmeter's housing features IP67 and NEMA/Type 4X protection ratings, ensuring resistance to dust and immersion in water. Sensor calibration includes a K factor of 1.6287 / 51 and a density accuracy of 0.0005 g/cc. The surface finish meets hygienic standards, featuring a roughness of 0.8 µm (150 grit). Nlodpfxoy Anhzj Afusg The unit is powered by a voltage range of 20-55 VAC or 16-62 VDC, consuming 15 VA/W at a frequency of 50-60 Hz. The housing shows some surface wear and minor dents, and the label exhibits slight wear but remains mostly legible. It is mounted on a wooden pallet and is equipped with attached braided cables with yellow markings and black cable ties. Some dust accumulation is visible on the flowmeter body, indicative of prior use. This Promass 83F flowmeter is suitable for precision mass flow measurement in the pharmaceutical, chemical, and food industries, particularly where hygienic conditions are required.

Condition: used, Year of construction: 2014, operating hours: 1,322 h, functionality: fully functional, machine/vehicle number: G3791, power: 550 kW (747.79 HP), total height: 3,700 mm, total length: 12,000 mm, total width: 2,950 mm, overall weight: 5,810 kg, Equipment: documentation/manual, 2G avus 500 plus – Gas-fired combined heat and power (CHP) plant – 550 kW For sale is a 2G gas-fired combined heat and power (CHP) plant, type avus 500 plus, with an electrical output of 550 kW. The plant was built in 2014 and is in used, fully functional condition. On April 19, 2023, a completely new gas engine was installed, and on December 9, 2024, an engine preservation procedure was carried out upon decommissioning of the plant (installation reports are available). The new engine has 1,322 operating hours. Technical data Manufacturer: 2G Energietechnik GmbH Type: avus 500 plus Year of construction: 2014 Serial number: CO0414C-ELLB-550054 Electrical output: 550 kW Power supply: 400 V / 50 Hz Rated current: 794 A Total operating time: 69,481 h Nlodezxqd Iepfx Afusg Operating hours since last maintenance: 1,322 h Weight: approx. 5,810 kg Dimensions (L × W × H): approx. 12,000 × 2,950 × 3,700 mm Condition and documentation The CHP plant is used and fully functional. Documentation and manuals are available. The chimney shown in the picture can be purchased if required. Location: Neuenkirchen-Vörden, Germany An inspection of the plant is possible after prior appointment. If you are interested or have technical questions, please send us an inquiry. We will provide further information and documents upon request.

Condition: used, functionality: fully functional, Year of construction: 1972, Used CALANDRA, MECHANICAL POWERED, WITH 3 UPPER ROLLERS OF 140mm, SERTOM 2000x5mm. Overhauled with compliance and safety engineer inspection, ready in the warehouse for viewing and testing. Size: 3500*1000*1200H, Weight: about 1600 kg. Nsdpfszh Dhxex Afuelg

Year of construction: 2021, condition: like new (used), functionality: fully functional, Specification Capacity 30 Ton Working length 1300mm Stroke length 100mm Throat depth Maximum open height without tools Fast speed of beam Bending speed Return speed 200mm 300mm 100mm/s 10mm/s 90mm/s Backgauge travel 300mm Length 1500mm Width 1200mm Height 1910mm Nlsdoziahdspfx Afusg Approximate weight 2000kg Machine equipped with Cybelec CybTouch 8 control (X & Y axis) Top and bottom tooling Light guards

Condition: excellent (used), Year of construction: 2022, operating hours: 54 h, functionality: fully functional, machine/vehicle number: 3W2I324202513, Equipment: charge status display, lighting, ALIEN-X The latest C-arm version introduced to the market in January 2019 (our unit manufactured in 2022). The system is designed to have a working performance similar to an angiography unit or a stationary hemodynamics unit; therefore, it will not be affected by the high temperature of the X-ray unit or other components. The C-arm movement is both motorized and manual. Isocentric active anti-collision system geometry on the FPD and X-ray side. Compact and stable with a perfectly balanced C-arm, which is safe for all movements. Excellent maneuverability thanks to two large anti-static steering wheels. Latest generation start & stop system with excellent ergonomics and easily recognizable (color-coded) steering wheels. Durable cable connections between the C-arm and the trolley, resistant to mechanical damage, special paint for quick cleaning and disinfection. Generator power: 25kW Detector: 3030 X-ray tube: dual focus 0.3-0.5 mm Anode speed: standard and high speed available Control console: no. 2 synchronized ETS15-18 (on the C-arm and on the trolley) ETS15-18: real-time images and reference images displayed C-arm movements: manual – motorized – hybrid C-arm position storage: no. 4 arbitrary positions Anti-collision systems: active systems on both the FPD and X-ray tube side Adjustable monitor: 4K Small-sized trolley: separate from the C-arm Foot pedal New EPB power supply systems X-ray tube Alien X uses the latest generation of X-ray tubes with a titanium, zirconium, and molybdenum (TZM) plate. The advantages compared to using pure molybdenum plates are: better resistance to deformation, higher recrystallization temperature, and higher thermal resistance. Anode capacity 400 kHU 104 kHU/min anode dissipation High anode rotation speed Dual focus 0.3-0.5 mm 1200 W dissipation in the housing WAD + EHC WAD (Water Aided Dissipation): X-ray tube cooling system; through the combination of dielectric oil management within the radiology complex, coolant, and an advanced heat exchanger, there are no fans in the sterile field. EHC (Eurocolumbus Heat Control): real-time control of the heat generated with immediate actions to change frames/s and/or pulses and/or imaging and radiological parameters to ensure optimal system operation and avoid overheating. Manual with motorized drive – HYBRID The Alien X C-arm movement can be done both manually and with a motor; manual movement is easy, and the system can be operated simply and ergonomically thanks to dedicated handles. Hybrid movement allows the combined use of both movements. Motorized horizontal movement is also available as an option. This option is mandatory if the EIC package is required. EPD anti-collision system However, it should not be overlooked that a flat detector must have certain important features, regardless of the technology used, namely: 16-bit DQE ≥ 75% Nlsdpfx Afjz Dft Ejueg MTF ≥ up to 55%

Condition: like new (used), Year of construction: 2021, OMAG AFFRI WIKI 90 JS-C – Automatic Vickers/Knoop Hardness Tester | 2021 | Excellent Condition For sale is a professional, automatic OMAG AFFRI WIKI 90 JS-C hardness tester from the renowned Italian manufacturer, AFFRI. The unit is from 2021, is fully functional, complete, and ready for operation. This hardness tester is designed for precise hardness measurements of materials in quality control laboratories, research and development departments, and manufacturing plants. It is equipped with a digital measuring system with a camera and a computer with dedicated software that enables automatic analysis of indentations. Njdpfozkpptox Afuslg Technical Specifications * Manufacturer: OMAG AFFRI (Italy) * Model: WIKI 90 JS-C * Year of manufacture: 2021 * Condition: very good, fully functional * Power supply: 115–230 V * Weight: approx. 70 kg * Made in: Italy Equipment * Control computer with software, * Digital measuring system with camera, * XY measuring table, * Complete cabling, * Emergency stop switch, * Ready for immediate operation. Application The device is ideally suited for hardness measurements using the following methods: * Vickers (HV), * Knoop (HK), * (depending on the configuration, also other measurement methods). Ideal for laboratories, the automotive and aerospace industries, toolmaking, and quality control. Please send a specific price offer.

Condition: good (used), Year of construction: 2004, functionality: fully functional, turning diameter over cross slide: 600 mm, turning length: 670 mm, turning diameter: 490 mm, overall weight: 6,500 kg, FOR SALE: High-Quality CNC Lathe Biglia B 658 MB (Year of Manufacture 2004) with Driven Tools + KID 70 Bar Feeder Are you looking for a reliable and robust workhorse for metalworking? For sale is a Biglia B 658 MB CNC lathe in good and fully functional condition. The machine is equipped with driven tools, an automatic tailstock, a reliable Fanuc control, and includes an automatic bar feeder. The complete package is available ex stock. General Information Manufacturer: Biglia (Italy) Model: B 658 MB Year of manufacture: 2004 CNC control: FANUC Series 18i-TB Condition: Good, fully functional Availability: Ex stock --- Key Technical Characteristics (Lathe) Maximum turning diameter: 380 mm Maximum turning length: 650 mm Maximum rod/bar diameter: 80 mm Maximum passage: 620 mm Spindle speed range: 30–3000 rpm Spindle drive power: 26/22 kW Spindle end: ASA 8″ Spindle bore diameter: 90 mm Diameter of the lathe chuck: 315 mm Bidirectional turret: 12 positions Turret indexing time (per position): 0.1 s Driven tool stations: 12 positions Max. speed of driven tool stations: 4000 rpm Max. torque of driven tool stations: 3.7 kW Feed in the X/Z/B axis: 220 / 650 / 660 mm Rapid traverse in the X/Z/B axis: 20 / 24 / 12 m/min Automatic tailstock maximum clamping force: 1080 Kg --- Round bar diameter: min. 5 mm (3/16") – max. 70 mm (2" 3/4) Square bar side: min. 5 mm (3/16") – max. 50 mm (2") Hexagonal bar height: min. 5 mm (3/16") – max. 60 mm (2 1/4") Maximum bar length options: 500 mm / 1615 mm Magazine capacity: 250 kg (e.g., approx. 60 bars of 10 mm) Bar change time: 50 sec (with a 1000 mm bar) Feed speed: 0–500 mm/sec Return speed: 1000 mm/sec Supply voltage: 230/400 Volt Control voltage: 24 Volt Installed power: 2 kW Weight: 580 kg Additional Equipment & Features KID 70 Bar feeder Measuring arm (Touch setter) Chip conveyor Collet chuck DIN 6343 Coolant tank capacity: 250 liters Coolant pump capacity: 150 l/min Nedpfx Aezbx N Esfuelg Coolant pump power: 0.73 kW Noise level: 74 dB(A) Physical Dimensions (Lathe) Dimensions (L x W x H): 4000 x 1900 x 1850 mm Weight of the Biglia B658/BM: approx. 6,000 kg Contact us today to request a quote for this complete production package! The machines are ready for immediate dispatch. > *(All information is given in good faith but we reserve the right to make errors)*

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1162068, SPECIFICATION Table size 1370mm x 620mm X axis traverse 1016mm Y axis traverse 660mm Z axis traverse 635mm Spindle nose to table 102 – 737mm Spindle BT40 Spindle speeds 0-12,000rpm Nodpozr H Tlofx Afujlg Spindle motor 22.4kW Rapid feed rate 18m/min Toolchanger capacity 30+ 1 tools Approximate weight 7750Kg MACHINE EQUIPPED WITH: - Haas CNC Control Swarf auger High speed machining Co-ordinate rotation and scaling Rigid tapping 5 off BT40 toolholders Filtermist extraction system Programmable coolant nozzle Lighting Guarding

Condition: ready for operation (used), Year of construction: 1962, functionality: fully functional, overall weight: 1,050 kg, input voltage: 380 V, type of input current: three-phase, For sale: VEB Schleifmaschinenwerk Berlin / WMW SI 40×70 cylindrical grinding machine, manufactured in 1962, serial number 1334/62, Made in Germany. The machine is complete and in working condition. The machine can be inspected and tested on-site before purchase. WMW / VEB Schleifmaschinenwerk Berlin is known for its robust industrial grinding machines designed for heavy-duty workshop and production applications. Technical data: Manufacturer: WMW / VEB Schleifmaschinenwerk Berlin Type: SI 40×70 Serial number: 1334/62 Year of manufacture: 1962 Country of manufacture: Germany Total weight: approx. 1,050 kg Electrical diagram: SI 40-007 Wiring diagram: SI 40-008 Power supply: 3-phase AC Frequency: 50 Hz Operating voltage: 380 V Control voltage: 220 V Condition: Used, operational condition. Inspection and test run are possible before purchase. Transport: Transport can be arranged throughout Poland after prior agreement. Sales document: VAT invoice or receipt available. Contact: Nedpfx Afeznvqleuslg Please contact us to arrange inspection, collection, or transport.

Condition: good (used), functionality: fully functional, Year of construction: 2021, laser type: fiber laser, laser hours: 1,347 h, laser power: 3,000 W, • The state-of-the-art laser cutting system, designed to the latest standards and featuring a gantry construction with a dual-drive system, has a generously sized working area of 3000 x 1500 mm, making it suitable for the most common sheet metal formats. • The automatic laser cutting head features Auto Focus (motorized focus adjustment), automatic height control, and collision protection. • Optimized setup times thanks to a change table system and an easy-to-use CNC control system with an extensive material database. • The fiber laser with 3000 W steel cutting power guarantees the highest cutting quality and productivity. • Thanks to the maintenance-free laser source, the cutting system also boasts low maintenance and operating costs. Complete system with CNC control (CypCut) Ytterbium fiber laser MAX Optical fiber cable High-pressure cutting head Automatic focus adjustment Laser protection enclosure Njdpozz A A Iofx Afujlg Automatic change table system Filter extraction system Central lubrication Cooling water chiller CAD/CAM software Operating and programming manual Inspection while the system is running is welcome.

Condition: used, Year of construction: 2007, operating hours: 3,826 h, Equipment: all wheel drive, Internal vehicle number: MK300047 Available immediately at our yard in Kaufungen. For more information, please contact: Nljdpfxjzqicme Afuog * Luis Lucena * Viktoria Sologubova Used JLG 460SJ telescopic boom lift, manufactured in 2007. The machine offers a working height of 16.09 m, a horizontal outreach of up to 12.72 m and a platform capacity of 270 kg. Its four-wheel hydrostatic drive, oscillating axle, 45% gradeability and foam-filled tyres make it suitable for demanding off-road applications. Technical details: * Make/model: JLG 460SJ * Machine type: Telescopic boom lift * Year of manufacture: 2007 * Operating hours: 3,826 h * Machine weight: 7,741 kg * Working height: 16.09 m * Horizontal outreach: Up to 12.72 m * Platform capacity: 270 kg * Platform dimensions: Approx. 0.91 × 1.83 m * Platform rotation: Hydraulic, up to 180° * Turntable rotation: 360°, non-continuous * Jib movement range: 130° (+70°/?60°) * Drive system: Four-wheel hydrostatic drive * Engine power: 36.4 kW * Fuel tank capacity: 83 litres * Hydraulic tank capacity: 136 litres * Emergency pump motor: 12 V DC * Travel speed: Up to 7.2 km/h * Gradeability: 45% * Axle oscillation: 0.20 m * Maximum ground pressure: 4.85 kg/cm² * Vehicle number: MK300047 * Condition: Used * German vehicle Dimensions: * Overall width: 2.31 m * Transport height: 2.47 m * Transport length: 8.91 m * Wheelbase: 2.37 m * Ground clearance: 0.30 m * Turret overhang in working position: 0.86 m * Inside turning radius: 2.00 m * Outside turning radius: 4.84 m Equipment: * Hydraulic platform rotation * Proportional control * Improved multi-function control * Interactive ground control display * ADE® control system * Platform display for machine status * AC cable to platform * 5-degree tilt alarm with warning light * Pivoting engine console * 12 V DC auxiliary power supply * Hour meter * Four-wheel drive * Oscillating axle * Movement alarm * Horn * Glow plugs * Lifting and securing eyes * Tyres: 12 × 16.5, foam-filled Inspection possible by prior arrangement. Further information, photos and videos are available upon request. Subject to errors, changes and prior sale.

Condition: excellent (used), Huber Nlsdpezii T Aofx Afujg Model: 030TW Huber Unichiller 030TW – Recirculating Chiller / Cooling Thermostat For sale is a Huber Unichiller 030TW, a powerful and efficient recirculating chiller suitable for laboratory and industrial applications. This unit is designed for continuous operation, providing consistent cooling performance with high energy efficiency. Features & Functions: - Modern touchscreen control with favorites menu, timer, data logging, and remote control options - Robust, closed cooling system for reliable continuous operation - Environmentally friendly refrigerant - Suitable for ambient temperatures up to +40 °C - Ideal for laboratory, chemical, engineering, and process cooling applications Technical Data: - Temperature range: –20 °C to +40 °C - Temperature stability: ±0.5 K - Cooling capacity: - 3 kW at +15 °C - 2.75 kW at 0 °C - 2 kW at –10 °C - 1 kW at –20 °C - Circulation pump: max. 30 l/min at 4.1 bar - Controller: Pilot ONE touchscreen controller (5.7” color display) - Connections: Ethernet, USB, RS-232, Pt100 - Refrigerant: R449A (CFC and HCFC-free, eco-friendly) - Dimensions (W × D × H): 400 × 440 × 1230 mm - Weight: approx. 137 kg - Condition: used Scope of delivery: (see photo) - Huber Unichiller 030TW - Power cable (Technical data and specifications subject to change and errors excepted!) Please do not hesitate to contact us for further questions by phone.

Condition: used, machine/vehicle number: 42412110002654, mileage: 288,139 km, power: 70 kW (95.17 HP), first registration: 01/1980, empty load weight: 5,850 kg, overall weight: 6,800 kg, Year of construction: 1980, operating hours: 7,215 h, Equipment: crane, For sale: Used UNIMOG 1000 with Atlas AK1402 loading crane • Internal number: i. K. • First registration: 01/1980 • Mileage: approx. 288,139 km • Operating hours: approx. 7,215 • Power: 70 kW / 95 hp • Unladen weight: 5,850 kg • Permissible total weight: 6,800 kg Nlodsz Aqykopfx Afusg • Trailer load: braked 22,000 kg, unbraked 1,500 kg • Additional headlights • Exhaust pipe pointing upwards • 12 V electrical system • Auxiliary gearbox with working group • Auxiliary drive at the bottom • Vehicle plate • Flatbed: L: 148 cm x W: 190 cm x H: 40 cm Atlas AK1402 loading crane 1 hydraulic extension Load capacities: 3.9 m – 1,030 kg 5.2 m – 770 kg This offer is subject to change. Errors and prior sale are reserved.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: GSEM2302014, overall weight: 4,900 kg, fuel type: diesel, tank capacity: 910 l, color: grey, output current: 630 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power (apparent): 481 kVA, continuous power (apparent): 350 kVA, total length: 4,300 mm, total width: 1,500 mm, total height: 2,300 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: YUCHAI, type of cooling: water, Equipment: CE marking, type plate available, REM Power GSEm 350000 SDEW is a high-performance industrial diesel generator designed for professional use in environments where reliable power supply is crucial. This model offers a rated output of 350 kW, maximum output of 385 kW, rated current of 630 A, and operates at 400 V, 50 Hz. It is equipped with a 6-cylinder engine, water cooling, AVR system for automatic voltage regulation, digital display for voltage, frequency, and operating hours, as well as electric start with included battery. The built-in ATS (Automatic Transfer Switch) function ensures automatic generator start-up in case of power failure, with additional protection provided by a low oil pressure alarm. The large steel fuel tank with a capacity of 910 liters enables up to 13.5 hours of continuous operation. The generator features a 3-phase direct connection, dimensions of 4300 × 1500 × 2300 mm, and a total weight of 4900 kg, making it suitable for demanding commercial and industrial applications. ATS cabinet included. For sale: a professional diesel generator REM Power GSEm 350000 SDEW. The unit delivers a rated output of 350 kW and maximum output of 385 kW, operates at 400 V / 50 Hz, and achieves a rated current of 630 A. It is equipped with a 6-cylinder engine, water cooling, AVR voltage regulation, digital displays for voltage, frequency, and operating hours, electric start with included battery, and ATS function for automatic start-up in case of a mains power outage. The generator also features 3-phase direct connection. It comes with an integrated 910 L steel fuel tank, providing up to 13.5 hours of continuous operation. The overall dimensions are 4300 × 1500 × 2300 mm, with a total weight of 4900 kg. Manufacturer’s article number: 39350000502. Nodpfx Ajy Au Riofujlg Technical Data: Manufacturer: REM Power Model: GSEm 350000 SDEW Rated power: 350 kW Max power: 385 kW Rated current: 630 A Voltage: 400 V Frequency: 50 Hz Engine displacement: 16,350 cc Fuel: Diesel Tank capacity: 910 L Continuous operation: 13.5 h Dimensions: 4300 × 1500 × 2300 mm Weight: 4900 kg