Used Laboratory Power Supply for sale (41,569)

Condition: good (used), laboratory power supply -0-1 A -0-20 V Isdpjb A N Sfsfx Agzotr -Weight: 5 kg

Condition: good (used), EA Electric Automatic Type: EA-EL 9080-170 B Electronic DC load, USB / Analogue / Master-Slave, Programmable, 80V, 170A, 2.4kW Technical data: Mains voltage 90...264 V AC Mains connection type socket Mains frequency 45...65 Hz Mains fuse T 6.3 Power consumption Max. 90 W Leakage current < 3.5 mA DC input Input voltage 80 V Input power 2400 W Input current 170 A Overvoltage protection range 0...1.03 * UNenn Overcurrent protection range 0...1.1 * INenn Overpower protection range 0...1.1 * PMax Maximum permissible input voltage 88 V Min. input voltage for IMax Approx. 2.2 V Temperature coefficient of the setting values Δ / K current / voltage: 30 ppm Voltage regulation Setting range 0...81.6 V Stability at ΔI < 0.05% Accuracy (at 23 ± 5°C) ≤ 0.1% UNenn Display: Accuracy ≤ 0.1% UNenn Remote sensing compensation Max. 5% UNenn Current control Setting range 0...173.4 A Stability at ΔU < 0.1% UNenn Accuracy (at 23 ± 5°C) ≤ 0.2% INenn Display: Accuracy ≤0.1% INenn Rise time 10...90% INenn < 23 μs Fall time 90...10% INenn < 46 μs Power control Setting range 0...2428 W Accuracy (at 23 ± 5°C) < 0.5% PMax Display: Accuracy ≤ 0.2% PMax Resistance control Setting range 0.04...15.3 Ω Accuracy (at 23 ± 5°C) ≤1% of the final resistance value + 0.3% of INenn Display: Accuracy Included in the accuracy of the control value EL 9080-170 B: Analog interface: Setpoint inputs U, I, P, R Actual value outputs U, I Control signals DC on/off, remote control on/off, R mode on/off Message signals CV, OVP, OCP, OPP, OT, PF, DC on/off Galvanic isolation from the device Max. 400 V DC Sampling rate setpoint inputs 500 Hz Isolation: Input (DC) to housing DC minus: permanent max. ±400 V DC plus: permanent max. ±400 V + max. input voltage Input (AC) to input (DC) Max. 2500 V, short-term Climate: Cooling type Temperature-controlled fans Ambient temperature 0...50 °C Storage temperature -20...70 °C Digital interfaces Built-in 1x USB-B for communication, 1x USB-A for functions, 1x master-slave bus Slot for digital modules Optional: CAN, CANopen, Profibus, Profinet, RS232, Ethernet, ModBus TCP, Ether- CAT Galvanic isolation from the device Max. 400 V DC Connections: Rear Share bus, DC input, AC input, Sense, analog interface, USB-B, Master- Itodpfx Agouv Eudozsr slave bus, interface module slot Front USB-A Dimensions: Housing (WxHxD) 19" x 2 U x 464 mm Total (WxHxD) 483 mm x 88 mm x 538 mm Standards EN 61010-1:2007-11, EN 61000-6-2:2005, EN 61000-6-3:2006 Class B Weight ≈ 11 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Programmable AC power source voltage regulator Laboratory power supply, power supply, Programmable AC Power Source CHROMA Type 6415 : 641500000 363 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values - Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FEATURES: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limit Iodsdz Srbspfx Agzotr - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combination for immediate recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short circuit protection - Temperature controlled fan speed - Self-test when switched on Additional connections: - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (printer) - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Space required H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition 2 pieces available, price per piece

Condition: good (used), TDK GEN20-120-1P230, TDK-Lambda 19 inch laboratory power supply unit 44 mm housing 0 - 20 V/DC / 0 - 120 A Switched Input voltage range 85 - 265 V/AC Integrated RS-232 / RS-485 interface External analog programming and monitoring Design (general): Rack-mountable Item condition: Used, in perfect condition Iodpfxsk Uuh To Agzstr R11B1_EK More laboratory power supplies - new and used - you can find in our store! International shipping costs on request!

Condition: good (used), Laboratory power supply, power supply unit, voltage generator, laboratory power supply device Itsdpscqp Hhjfx Agzer -Input: 230 volts -Output: 100-415 volts -Dimensions: 320/170/H130 mm -Weight: 3.2 kg

Condition: good (used), EA Electric Automatic Type: EA-EL 9080-200 EA Elektro-Automatic Electronic Load (2,4KW) 0-80V 0-200A Technical data: Mains input: Mains voltage 115V/20V switchable Mains frequency 50/60Hz Mains fuse T2.5A DC input: Input voltage U rated 0...80V Input power P rated 0...2400W, with temperature-dependent derating Continuous power 1500W at 20°C environment Input current I rated 0...200A Overvoltage protection limit 1.1 * U rated Maximum permissible input voltage 100V Isdpfxouv Ewre Agzotr Voltage regulation: Setting range 0...80V Resolution display 100mV accuracy

Condition: used, Programmable AC power source voltage regulator Laboratory Power Supply, Power Supply, Programmable AC Power Source CHROMA Type 6415 : 64150296 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values- Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. Output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output cut-off relays - EEPROM memory for user-defined voltage and frequency combination for instant recall at any time - Optional GPIB, RS-232 and analog programming interface Itedpsdz Sraofx Agzjr - Over voltage, under voltage, over power, over current, over temperature and short circuit protection - Temperature-controlled fan speed - Self-test when switching on - Supplied as shown, without additional accessories and connection cable Additional connections: - BNC (EXT VREF) - 9 Pol. D-Sub (RS-232C interface) - 24 Pol. Centronic (GPIB) Space requirement H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition

Condition: used, Laboratory power supply, power supply, voltage generator, laboratory power supply -Input: 230 volts AC -Output: 0-30 volts DC Itjdpfsb Nkt Dex Agzsr -Dimensions: 150/240/H130 mm -Weight: 4.5 kg

Condition: excellent (used), EA Elektro Automatik Model: EA-PS 8080-170 3U EA Elektro-Automatik EA-PS 8080-170 3U 19" Rack – Laboratory Power Supply 0-80V / 0-170A, 5000W Itsdpfjw S T Rlex Agzsr For sale is a high-quality programmable laboratory DC power supply from the renowned manufacturer EA Elektro-Automatik GmbH & Co. KG. This is the EA-PS 8080-170 3U model with an output power of up to 5000 W. Key features: - Autoranging (flexible combination of V/A up to maximum power) - Remote sense (up to 2.5 V compensation) - Low ripple: < 10 mV RMS / < 100 mV pp - Multiple interfaces for external control: USB, RS-232, CAN, LAN (Ethernet), GPIB (IEEE488), Profibus - Analog control (0–5 V / 0–10 V) - Fan-cooled, robust industrial design Technical data: - Output voltage: 0 … 80 V DC - Output current: 0 … 170 A - Maximum power: 5 kW - Construction: 19" rackmount, 3U - Efficiency: approx. 93% - Weight: approx. 20 kg Scope of delivery (see photo): - EA-PS 8080-170 3U power supply - Power cable (Specifications and technical details subject to change and errors!) For further questions, feel free to contact us by phone.

Condition: used, Laboratory power supply, power supply, voltage generator, laboratory power supply -Input: 230 volts AC -Output: 24 V 2.5 A Isdpsb S Htmefx Agzjtr -Dimensions: 160/270/H110 mm -Weight: 5.5 kg

Condition: excellent (used), Power supply, power converter, power supply unit, switching power supply, DIN rail power supply Manufacturer: B Itedpfx Agjghb Elszer

Condition: ready for operation (used), Okuma DC-S1A DC Power Supply 4 Axes CZ-270C , serial no. according to photo ,used, normal signs of use, 100% functional Itedpfx Agsi Ecanszjr

Condition: ready for operation (used), Okuma OPUS 5000 GHP Power Supply 5000T SN: 00198 , serial no. according to photo ,used, normal signs of wear, 100% functional Ijdji Ecaropfx Agzetr

Condition: new, Siemens 6RA4001-1AA01 Simodrive Power Supply < unused > in opened original packaging, 100% functional. Itodoxagwaepfx Agzor

Condition: ready for operation (used), Contraves PS 700 DC Power Supply , used, good condition, 100% functional Itsdpfx Agei D Umhszor

Condition: ready for operation (used), Bosch NT 600 Power Supply, serial number as per photo, used, minor signs of wear, 100% functional Itodpsi D Uarefx Agzjr

Condition: ready for operation (used), Hottinger Baldwin Mod 240 Power Supply ,used, normal traces of use, 100% functional, scope of delivery according to photos Iodpfx Agoi Ea N Rjzstr

Condition: ready for operation (used), Fanuc A06B-6077-H106 Power Supply Module Version: C SN:V01110794, the item has been checked and tested! ,used, normal signs of use, 100% functional, scope of delivery as per photos Iodpfxemvknpe Agzetr

Condition: ready for operation (used), Indramat TVM 2.1-50W1-220V A.C. Servo Power Supply , used, normal signs of use, 100% functional Itjdpfji Ebrksx Agzjr

Condition: ready for operation (used), Alsthom Parvex NFC 53 220 / AMS 2300515 Power Supply,used, minor signs of wear, 100% functional, scope of delivery as per photos Iedstqa T Rspfx Agzotr

Condition: ready for operation (used), Alsthom Parvex NFC 53 220 / AMS 2300515 Power Supply SN: 2411,used, minor signs of wear, 100% functional, scope of delivery as per photos Iedpfx Agetvcrtozjtr

Condition: ready for operation (used), Mitsubishi ADU30B B0265 Power Supply,used, normal signs of usage, 100% functional, scope of delivery according to photos Itedsi Eb Igepfx Agzer

Condition: ready for operation (used), Mitsubishi ADU40A B1296 Power Supply,used, normal signs of usage, 100% functional, scope of delivery according to photos Itedpfx Agei Eb Ikszer

Condition: ready for operation (used), AGIE HPS-06 High Power Supply 613760.8, serial number as per photo, used, minor signs of wear, 100% functional, scope of delivery as per photos Isdpfx Aji D Tv Ssgzjtr

Condition: ready for operation (used), Agie Zch High power supply HPS-01 A 613.760.8 , used, small traces of use, 100% functional Iedpfxji D Ty Dj Agzjtr