Used Powermat for sale (73)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 12 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 120 m/min, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 120 mm, overall weight: 16,000 kg, power of feed motor: 37,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 3,000 rpm, height adjustment type: electric, planer shaft diameter: 50 mm, type of input current: three-phase, number of spindles: 10, power: 574 kW (780.42 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, rotational speed infinitely variable, Weinig Powermat 2500 10 Spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 37 kW / 12–120 m/min, Spindle configuration: Dedpfx Anex Svm Rjweut 1- Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2- Right (11 kW) 3- Left (11 kW) 4- Top (37 kW) – with fully automatic straight jointer 5- Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6- Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 8- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 9- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 10- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Short infeed table, 1.3 meters (4 rollers), with 2 powered rollers above the table and 2 powered rollers in the table (both table rollers can be lifted). Table height adjustment with electronic digital readout. Incl. 2 heavy-duty side pressure rollers, 140 mm diameter, pneumatically actuated. Base supports, height 320 mm, for a table height of 1190 mm. Marathon POWER Coating for machine table, fences, and guide rails (excluding infeed table and special table surfaces). Special coating to protect table plates, fences, and guide rails from excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, chipboard, plastics, metals). Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, diameter 120 mm, located in the area of the right and left spindle.

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 102848, functionality: fully functional, operating hours: 3,142 h, empty load weight: 5,000 kg, feed rate X-axis: 33 m/min, number of spindles: 7, TECHNICAL DETAILS Number of spindles: 7 Spindle 1 - Spindle type: Bottom - Motor power: 15 kW - Tooling: Yes Spindle 2 - Spindle type: Right - Motor power: 11 kW - Tooling: Yes Spindle 3 - Spindle type: Left - Motor power: 11 kW - Tooling: Yes Spindle 4 - Spindle type: Top - Motor power: 22 kW - Tooling: Yes Spindle 5 - Spindle type: Bottom - Motor power: 15 kW - Tooling: Yes Spindle 6 - Spindle type: Top - Motor power: 30 kW Dusdpoy Nyb Hjfx Anwst - Tooling: Yes Spindle 7 - Spindle type: Bottom - Motor power: 15 kW Minimum planing width: 20 mm Maximum planing width: 300 mm Minimum planing height: 3 mm Maximum planing height: 160 mm Infeed table length: 1,000 mm Feed roller diameter: 140 mm Extraction nozzle diameter: 160 mm Feed speed: Manual Minimum feed speed: 5 m/min Maximum feed speed: 33 m/min Feed speed regulation: Infinitely variable MACHINE DETAILS Voltage: 400 V Current consumption: 278 A Circuit breaker: 400 A Power: 128 kW Dimensions & weight Dimensions (L x W x H): 5,500 x 2,400 x 2,100 mm Net weight: 5,000 kg Operating hours: 3,142 h EQUIPMENT Driven rollers in the table Powerlock Cutterhead drive: Cardan shaft drive Lubrication system: Automatic

Condition: used, Year of construction: 2006, Colour: Grey Empty weight: 5.000 kg Price: On request - Details: - └ Description: Currently not working, problem with 7th-spindle sensor - Year: 2006 - Documentation available: No - CE certificate present: No - Serial number: 105364 - Number of spindles [pcs.]: 7 Dsdpfx Anoyr Ntcjwjut - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 11 - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 11 - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 18.5 - - Tool present: Yes - └ Spindle 5: - - Spindle type: Bottom - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 6: - - Spindle type: Top - - Motor power [kW]: 18.5 - - Tool present: Yes - └ Spindle 7: - - Spindle type: Bottom - Min. planing width [mm]: 15 - Max. planing width [mm]: 231 - Min. planing height [mm]: 3 - Max. planing height [mm]: 161 - Feed table length [mm]: 1000 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 7.5 - Conveyor drive: Cardan drive - Lubrication system: Automatic - Diameter extraction nozzle [mm]: 160 - Options: Powerlock, Powered rollers in table, Automatic feeding system - Feed speed: Automatic - └ Min. feed speed [m/min]: 6 - └ Max. feed speed [m/min]: 36 - └ Feed speed control: Continuously adjustable - Feeding system: - └ Brand: Weinig - └ Type: E-1/L - └ Max. feed length [mm]: 5000 - └ Max. feed width [mm]: 230.5 - Voltage [V]: 400 - Current consumption [A]: 242 - Fuse [A]: 315 - Power [kW]: 112.0 - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2017, Number of boring spindles 4 St. Working width 230 mm Working height 160 mm Feed motor 11 kW Feed speed 60 m/min. Planer and moulder Weinig type Powermat 2400 for four-sided planing and profiling of timber including infeed mechanization Weinig High Mech E 1. The machine has a Memory Plus system with electronic positioning (radial) of the spindles 3 Duedpfsy Ery Hox Anwjt

Condition: good (used), Weinig add-on feed gearbox for short pieces. Suitable for Weinig Unimat, Profimat, Hydromat, Powermat. Used condition. Dujdpfx Aey N Elkjnwet

Condition: used, Year of construction: 2010, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Duedjyq S Duopfx Anwjt Feed motor 3 kW Feed speed 5-30 m/min. Weinig Powermat 500, year of manufacture 2010, window version ----- technical details short summary: ----- - 6 spindles, 5 of which are PowerLock - 8,000 rpm - Large PowerCom control system - Spindles 2, 3, and 4 axially CNC-controlled - Spindles 2, 3, 4, and 5 radially CNC-controlled - Window package for glazing bead removal: Pneumatic indexing of right and top spindles for bead removal See attached PDF document for detailed description Options with additional costs: ----- - Existing planing and molding tools by Leitz (price on request!) - Maweg Saturn Duo single-slot wood sander, manufactured in 1985, in a production line and workpiece return conveyor. Price 4.000 Euro (Technical specifications according to the manufacturer, without guarantee!)

Condition: used, Number of boring spindles 7 St. Working width 260 mm Working height 160 mm Length of the planing table 2.500 mm Feed motor 4 kW Feed speed 30 m/min. Dusdpfx Asxzdwyjnwet

Condition: used, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ----- 5 spindles with 8,000 rpm 4 x HSK/Powerlock Axially and radial CNC adjustments of the spindles via control CNC-controlled adjustment and positioning of the feed Table tops with guide blades at spindles 2 and 3. Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right Duodpfxsyy A Iqo Anwot ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Table tops with guide blades 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers (Weinig patent) with depth...

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Equipment: rotational speed infinitely variable, For sale is a UC Matic 15 window manufacturing line as well as a Weinig Powermat 500, consisting of the following main components: - Infeed automation - CNC machining center Unirex 2000 Djdpfx Ajx Sqxhsnweut - CNC end-processing unit Unitec 15 - CNC longitudinal profiling machine Unicontrol 12 - Automatic double-part turn-over and return system - Outfeed buffer - Powermat 500 with automation The system is designed as an integrated production line for window and profile machining, enabling efficient and flexible manufacturing. The machinery will be dismantled by a specialized service provider. The costs for dismantling will be disclosed and are to be borne by the buyer.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 114550, working width: 230 mm, planing height: 120 mm, number of spindles: 6, Planer and moulder Weinig Powermat 500 for four-sided planing and profiling of solid wood. The machine is equipped with CNC control and the proven PowerLock quick-change system, and also features a mechanized return system for the planed parts, making it ideal for efficient production. Machine Equipment 6 spindles 1st spindle: 7.5 kW, 8,000 rpm 2nd spindle: 7.5 kW, 8,000 rpm, PowerLock 3rd spindle: 7.5 kW, 8,000 rpm, PowerLock 4th spindle: 7.5 kW, 8,000 rpm, PowerLock 5th spindle: 7.5 kW, 8,000 rpm, PowerLock 6th spindle: 7.5 kW, 8,000 rpm, PowerLock Working width: 20 – 230 mm Working height: 8 – 120 mm Worktable: 2.5 m (including straightening fence) Top pressure rollers, spring-loaded Lateral pressure, pneumatic Frequency-controlled feed with brake, feed speed: 5 – 30 m/min Reduced feed roller distance between pendulum holders (400 mm) Additional feed rollers and shortened roller spacing Durofer steel roller, self-cleaning Dsdpfsx Sxfvjx Anwsut Infeed roller in front of the 1st bottom tool, pneumatic Siemens/Powercom control The machine is in a very good, well-maintained condition, has been professionally operated and regularly serviced, and will remain in operation until 17.12.2026. Inspection of the running machine is possible anytime by appointment. The price includes the tools for all 6 spindles. Dismantling and loading will be invoiced separately to the buyer. The technical description and the machine layout can be found in the documents.

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 10000241, workpiece height (max.): 160 mm, workpiece width (max.): 310 mm, number of spindles: 4, WEINIG POWERMAT 1500 - SPECIAL MACHINE CONFIGURED FOR MILLING WOODEN DOOR FRAME PANELS Working width 30 - 310mm (with tool flight circle 93-125mm) Working height 10 - 160mm (with tool flight circle 93-163 mm)Description of machine parameters Number of spindles 4 Spindles bottom 1 Spindles right 1 Spindles left 1 Spindles top 1 Separate motor for each spindle Electronic feed incl. brake, infinitely variable 5-40 m/min. Duodpouygcwsfx Anwet Short infeed table 1.2 m long with 2 driven rollers above the table Hard-coated machine table surface Manual lubricant pump WEINIG Comfort Set Control system WEINIG MEMORY PLUS-SYSTEM CE mark Declaration of Conformity

Condition: ready for operation (used), Year of construction: 2015, Weinig Powermat 700 6x 40mm Spindles. CNC on spindles 3, 4 and 5. Width 20-230mm Height 10-160mm Memory system Automatic lubrication system for bedplates. No 1.  11kW - Bottom 7000rpm No 2. 7.5kW - Right 7000rpm No 3. 7.5kW - Left 7000rpm Dusdpfx Aeyub Nnenwot No 4. 15kW - Top 7000rpm No 5 . 11kW - Top 7000rpm No 6 . 11kW - Bottom 7000rpm Electronically variable feed. 40m/min Short infeed table. Marathon coating for machine bed plates. Manuals & hand tools.

Condition: used, Year of construction: 2004, functionality: fully functional, working width: 230 mm, planing height: 160 mm, spindle diameter: 40 mm, planing width: 230 mm, working height: 160 mm, total width: 230 mm, total length: 5,000 mm, overall weight: 6,600 kg, spindle speed (max.): 8,000 rpm, spindle speed (min.): 8,000 rpm, rotational speed (min.): 8,000 rpm, workpiece height (max.): 160 mm, workpiece width (max.): 230 mm, input voltage: 400 V, table length: 2,500 mm, shaft diameter: 40 mm, number of spindles: 8, extraction connection diameter: 140 mm, Equipment: motor brake, WEINIG profiler, model Powermat 1000, equipped with: lower horizontal shaft, right spindle, left spindle for all widths, right spindle, upper horizontal shaft, lower horizontal shaft, upper horizontal shaft, lower horizontal shaft. CNC on left spindle, upper horizontal shafts, finishing lower horizontal shafts. 8,000 rpm motors, equipped with PowerLock, 80 mm spindle stroke, metric counter of produced linear meters, grooved table, feed speed: 36 m/min. Dodpfx Aney Aywuewsut

Condition: excellent (used), Year of construction: 2015, Massive Parquete production line Manifacturer - MICHAEL WEINIG AG / GMC SERVICE Year - 2015/2007 Capacity - 800m2/ shift Max Width of Parquet- 200 mm Max length of Parquet - 2.400 mm Djdpfxoyzfr Uo Anwsut Complete line for production normal solid parquet ! On this line it is possible to produce different dimensions at the same time ! Kind of parquet - Herringbone 90 , Chevron 45/60 Condition - Exellent

Condition: good (used), Year of construction: 2007, - Planing width (mm): 230 - Planing height (mm): 140 - Spindles: 6 1st spindle: bottom 2nd spindle: right 3rd spindle: left 4th spindle: top 5th spindle: top Dsdpfx Aey Ayg Asnwsut 6th spindle: bottom - Spindle speed (rpm): 8000 - Total connected load (kW): 65 - Rated current (A): 142 - With planing heads Powerlock system - Program memory - Soundproof hood - CE compliant

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, feed rate X-axis: 36 m/min, working width: 230 mm, planing height: 160 mm, planing width: 230 mm, working height: 160 mm, total width: 2,400 mm, total height: 1,800 mm, power of feed motor: 5,000 W, jointer table length: 1,200 mm, table length: 1,200 mm, number of spindles: 7, 7-spindle moulder with 6 PowerLock spindles. All spindles are electronically controlled (except for the planer head). CNC PowerCom control. Working width: 20-230 mm, Working height: 8-160 mm, Feed speed: 6-36 m/min, 5 kW, with electronic variable speed drive. 1.2 m infeed table. Automatic lubrication pump (Waxilit). 8 pneumatic pressure shoes and 3 rollers on the table. Configuration: Dedpoy At Efjfx Anwjut Bottom horizontal spindle 5.5 kW Right vertical spindle 7.5 kW with PowerLock Left vertical spindle 7.5 kW with PowerLock Right vertical spindle 7.5 kW with PowerLock Top horizontal spindle 11 kW with PowerLock Bottom horizontal spindle 11 kW with PowerLock Top horizontal spindle 11 kW with PowerLock Fully reconditioned four-sided moulder.

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing Dujdpfoy Auvfjx Anwet 11kW feed motor Automatic lubrication system. Electric digital display memory system. Possible to supply with Weinig moulder infeed and outfeed

Condition: excellent (used), Year of construction: 2013, Automatic profiling planer Weinig Powermat 600 net price €68,800 Technical data Year of manufacture: 2013 Working width (with cutting circle 93 - 125 mm): 20 - 230 mm Working height (with cutting circle 93 - 125 mm): 10 - 120 mm 7 spindles First bottom horizontal spindle, 5.5 kW (7.5 HP) motor First right vertical spindle, shared motor with left vertical spindle: 11 kW (15 HP) First left vertical spindle, shared motor with 1st right vertical spindle Second right vertical spindle: 5.5 kW (7.5 HP) motor First top horizontal spindle: 7.5 kW (10 HP) motor Second top horizontal spindle: 7.5 kW (10 HP) motor Second bottom horizontal spindle: 5.5 kW (7.5 HP) motor Electronic feed with brake, infinitely variable adjustment 5 - 30 m/min. Feed motor: 4 kW (5.5 HP) Operating voltage: 400 V (voltage range 380 - 420 V), 50 Hz All spindle motors IE2 rated. All spindles with high rotational precision. PowerLock standard equipment. Jointing table length: 2 m (incl. longitudinal fence) Marathon Coating for the machine table and fences Special coating protects table segments and fences from excessive wear. Recommended for processing abrasive materials (e.g. tropical woods, MDF, chipboard). ADDITIONAL MACHINES AVAILABLE FOR SEPARATE PURCHASE AT THE FOLLOWING NET PRICES: 1. Weinig Rondamat 960 Powerlock (automatic straight knife and profile grinder) net price €15,300 Specification: Profile grinder: Weinig Rondamat 960 Powerlock / HSK. High-precision knife grinder for sharpening straight knives and profiling with template. Grinding of straight knives in the cutter block. Manual grinding of profiles and straight knives. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: ceramic 5 mm, borazon 10 mm Grinding wheel bore: 60 mm Dedpfeytd S Nsx Anwjut Tool diameter min./max.: 100 mm / 300 mm Max. tool width: 240 mm Wheel drive: 1.1 kW Spindle speed: 1700 / 2000 / 2400 / 3000 rpm Relief angle: Radial (back): 10–30°, Axial: 0–20° For rotary heads up to 60° Coolant tank approx. 50 liters Table feed: 0–240 mm Electrical connection approx. 2 kW POWER LOCK SYSTEM option For grinding PowerLock tools HSK quick-change tool holder Radial table clamping with fine adjustment, max. tool width 240 mm 2. WEINIG OptiControl 970095 Tool Measuring Station net price €7,650 Specifications: Min. tool diameter: 90 mm Max. tool diameter: 300 mm Tool length: 0–240 mm Radial measurement range (radius): 150 mm Non-contact measurement of tool dimension, radius (R) and height (H), displayed on electronic digital readouts Electronic digital displays for tool radius and height HSK63 tool holder for PowerLock tools NEW: PowerLock HSK63 Adapter, arbor D=50 x 260 mm 3. Weinig Template Maker Isel 3020 Copy Milling Machine net price €1,700 Applications: Profile milling Manufacturing templates for tools for further machining, e.g. on Weinig Rondamat 4. POWERLOCK SHAPER HEADS price €7,500 Two cabinets fully equipped with approximately 45 shaper heads for various applications

Condition: used, Year of construction: 2006, functionality: limited functionality, machine/vehicle number: 106196, planing height: 200 mm, spindle diameter: 90 mm, planing width: 300 mm, spindle speed (max.): 8,000 rpm, height adjustment type: electric, compressed air connection: 8 bar, number of spindles: 5, For sale is a planing line by Weinig, complete with associated mechanisation from Kallfass (before and after the planer). The planing line is currently no longer in daily production. The operator side (left) first spindle and its mounting are defective. Weinig Moulder: Weinig Powermat 2000XL (year 2006) with 5 spindles (Weinig Powerlock system) plus chamfering unit. "Set-up time savings!" Spindle arrangement: bottom, right, left, top, bottom. The bottom and top spindles are both equipped with a jointing device. Spindle motor ratings: bottom 23.5 kW / right 15 kW / left 15 kW / top 28.5 kW / bottom 28.5 kW. Spindle speed: 8,000 rpm. The feed has a 15 kW drive motor, providing feeding speeds from 6 to 60 m/min. Compressed air requirement: nominal pressure 8 bar, operating pressure 6 bar. Workpiece dimensions for processing in the planing line: Shortest part: 2.00 m Longest part: 11.00 m (depending on mechanisation) Minimum thickness: 19 mm Maximum thickness: 200 mm Minimum width: 40 mm Maximum width: 300 mm Maximum profiling depth: 35 mm Feed rate: 6–60 m/min. Splitting is possible on the fifth lower spindle up to 60 mm height. Mechanisation: Kallfass "HmoK10000" year 2006 (operational/used) Before and after the planing line there is mechanisation by Kallfass. There is the option to buffer 2–3 packs before the unit, which must then be manually destacked before the infeed. Layer formation after the planer is performed by a paternoster unit with 3 adjustable walls. The maximum component length for this setup is 11.00 m. Dsdpfx Ajyzibmsnwout Price is quoted net ex works, without warranty. Complete disassembly is to be carried out by the buyer. A large inventory of cutterheads, spare parts, and various extraction components is available and can be purchased separately.

Condition: ready for operation (used), Year of construction: 2017, Number of boring spindles 4 St. Working width 230 mm Working height 160 mm Feed motor 11 kW Feed speed 60 m/min. Control Memory Plus Dodpfx Ajyhfhnonwjut

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 106531, working width: 230 mm, power: 75 kW (101.97 HP), input current: 163 A, table width: 230 mm, Equipment: cabin, Rarity! Four-side planer Weinig Powermat 500 with splitting unit!! (the last two spindles fitted with saw blades, anti-kickback device, splitter wedge) for sale complete with all accessories. The machine has 7 spindles/shafts (bottom / right / left / top / bottom / right / left). We used the line to produce middle layers for three-layer board manufacturing. The machine is in perfect working order. Dodsyyw Ufspfx Anwsut The machine is still in operation and can be demonstrated. Further technical details will follow in the next few days...

Condition: excellent (used), Year of construction: 2013, I sell the fourside moulder Weinig POWERMAT 600, year 2013 Working width 230mm Working height 130mm 6 spindles configuration: Bottom Right Left Dedpfx Aneyznrkjwjut Top Top - 8000rpm Bottom 3-zone pneumatical pressure Good condition Fully working! Available immediately Including full documentation and CE certyficate.

Condition: excellent (used), Year of construction: 2008, operating hours: 8,000 h, Four-sided planer Weinig Model Powermat 400 LE - machine with ribbed table Year of manufacture: 2008 Operating hours: 8000 Maximum working width: 230 mm Maximum working height: 120 mm The machine is equipped with 5 spindles featuring the Powerlock system Spindle configuration: - bottom 5.5 kW Dodpfx Anjwybrnjwsut - left and right – 7.5 kW each - top – 7.5 kW - bottom – 7.5 kW Spindle speed: 6000 rpm Feed speed steplessly adjustable via inverter: 5 – 30 m/min Electronic spindle positioning – Memory system The machine is in very good technical condition, complete with cutter heads.

Condition: excellent (used), functionality: fully functional, Weinig Powermat 500 four-sided planer Dsdjvfr Rgepfx Anwjut Working width 230mm Working height 160mm Number of spindles 6 Spindle arrangement: Bottom 5.5kw 8000r.p.m Right 5.5kw 8000r.p.m Left 7.5kw 8000r.p.m Top 7.5kw 8000r.p.m Bottom 7.5kw 8000r.p.m Universal 5.5kw 8000r.p.m Spindle #6 equipped with power lock system Feed speed adjustable by inverter up to 30m/min Pulling rollers in the worktop (1 grooved roller for wet wood) Electro-motorized positioning of height and working width Pneumatic material stops Drive on karda shafts Total power 41kw Year of production 2005 CE certificate

Condition: excellent (used), Year of construction: 2015, WEINIG POWERMAT 1200 (6 SPINDLE) YEAR 2015 WIDTH 230MM HEIGHT 160MM ALL SPINDLES 8000 RPM ALL SPINDLES 50MM SHORT INFEED TABLE 1: BOTTOM 7.5 KW 2: RIGHT 7.5 KW 3: LEFT 7.5 KW 4: TOP 15 KW 5: TOP 15 KW 6: BOTTOM 11 KW CNC AXIAL CONTROL ON SPINDLES 3, 4 AND 5 40 M/MIN+ ELECTRIC. FEED 7 x DRIVEN TOP FEED ROLLERS 3 x DRIVEN BED FEED ROLLERS ANTI-KICKBACK DEVICE AUTOM. BED LUBRICATION PNEUM. POWERED SIDE PRESSURE ROLLERS DIMENSION: APPR 3400 X 2000 X 1800 MM WEIGHT: APPR. 4500 KGS DUSTHOODS: 6 x 140 MM DIAMETER DUST MANIFOLD INCLUDED POSSIBLE TO SUPPLY WITH MOULDER INFEED AND DROP LEAF OUTFEED POSSIBLE TO SUPPLY TOOLING IF NEEDED Dedpoyub Dxsfx Anwjut