Moulder

WEINIG POWERMAT 1500

Year of construction: 2005, condition: excellent (used), KLIKLOK CERTIWRAP C-80 ID.NO. 2505 Kliklok HST Certiwrap C-80 sleeve machine for putting cardboard packaging around products. 3x different tools included & associated Nordson glue set year mod 2005. Nwsdpski Tlqjfx Aaton No. 1. 160 x 388 mm. No. 2. 160 x 407 mm No. 3. 422 x 162 mm dimensions 470 x 130 H 170 cm.

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Nwjdpfstk It Ssx Aatjn Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: reconditioned (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ----- - 5 spindles with 8,000 rpm - 4 x HSK/Powerlock - Axially and radial CNC adjustments of the spindles via control - CNC-controlled adjustment and positioning of the feed - Table tops with guide blades at spindles 2 and 3. - Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Table tops with guide blades 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Nodpfx Aeyy A Iqoatewn Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers (Weinig patent) wi...

Condition: excellent (used), Year of construction: 2020, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,500 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, total width: 5,800 mm, total height: 4,500 mm, total length: 13,500 mm, table length: 10,000 mm, table width: 1,250 mm, Travelling Column High performance, precision and machining power Linear guiding of RAM combined with Hydrostatic Guiding HDS ACD2 Milling head with 5000 Rpm and 1400 Nm torq Aitek ATC chain 60 position with L=400 and 250 diameter x 35 Kg Filtration with IKZ 15 Bar Chip conveyor BLUM 3D Measuring probe Wide bed linear guided in X-Travel W=930 mm Rotary table driver prepared in E-Cabinet X-Axis: 8000mm Y-Axis: 1300mm Z-Axis: 2500mm Table Length: 10000mm Nwjdpfxoyr Dmde Aatjn Table Width: 1250mm Power on spindle: 40kW Spindle speeds: 5000Rpm Spindle Taper: 40ISO/Bt/Mk Feed rate X-Axis: 35000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Millinghead auto-index:0.001 x 0.001 Gr° Working hours: 3800H Length: 13500mm Width: 5800mm Height: 4500mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Code: 0348 Brand: VITAP - ITALY Model: POINT K2 TOP - CE Standard CNC working centre for the precise and flexible drilling and milling of panels, furniture, custom-made furniture, kitchens, bathroom furniture and various – CE Standard – Year 2017 Technical specifications: Compact machine Patented D.D.T. (double dynamic transport) system with continuous panel movement without any repositioning of the workpiece, using two clamps. Technical data: Panel dimensions: Min/max length 270/3000 mm Min/max width 180/1100 mm Max height 50 mm Horizontal panel feed on X-axis 25 mt/min Vertical feed on Z-axis 15 mt/min Horizontal feed on Y-axis 30 mt/min Drilling head: Motor 2 Hp 12 vertical spindles side 1 Z-axis 2 horizontal spindles side 4 Y-axis 2 horizontal spindles side 6 of the Y-axis 2 horizontal spindles side 3 X-axis 2 horizontal spindles side 5 X-axis Centre-to-centre distance between spindles 32 mm Max horizontal bit diameter 15 mm Max horizontal drilling depth 30 mm Max vertical drilling depth 55 mm Router unit: Motor power 5 Hp - 24.000 rpm Blade unit: Diameter mm 100 x 4 - 7.000 rpm TPA software Horizontal milling unit Infeed roller conveyor 800 x 600 mm Outfeed roller conveyor 800 x 600 mm Suction port diameter : 1 mm 50 - 2 mm 100 Compressed air 7 bar Overall dimensions mm 2530 x 1700 x 1900 h Weight kg 833 Nedjyzrxzepfx Aatswn

Condition: excellent (used), Year of construction: 2008, HYPERTURN 665 MCplus - B-PowerMill Multi-Axis CNC Turning Center with automatic tool changer, Y-axis and B-axis, for complete machining of turned-milled parts. Integrated spindle motors (ISM) on main and sub-spindle with thermocompensation system (liquid cooled). Drive power: Main spindle - 29 kW Sub-spindle - 22 kW Speed range: Main spindle 0-5000 rpm Sub-spindle 0-7000 rpm Spindle interface (DIN 55026): Main spindle KK 6 (bore 65 mm) Sub-spindle KK 6 Y-axis: travel range +/- 50 mm The Y-axis is designed so that the resulting cutting forces are distributed over two axes, providing extremely high rigidity for all machining operations. B-PowerMill: For machining inclined surfaces and bores, a motor-driven milling spindle with a 24-position tool magazine is integrated into the upper slide system. The swivel range of 210° is infinitely adjustable and can be interpolated. Preloaded roller guides in all linear axes, digital drive system, integrated spindle encoder, state-of-the-art SINUMERIK 840D control technology, includes: Nwedpfexz Ab Rox Aaten * Hollow clamping cylinder incl. draw tube * Part ejector and coolant supply through the sub-spindle * 12-position VDI 30 radial tool turret with directional logic for up to 12 driven tool stations Swivel speed adjustable with feed switch. Performance data: Max. 6.7 kW at 2650 rpm Constant torque 25 Nm Speed range 0-5000 rpm - C-axis for main and sub-spindle - TRANSMIT software for easy C-axis programming * Parts catcher for finished parts * Sinumerik 840D * Chip conveyor with a programmable discharge height of 1200 mm (hinged belt type) * Coolant system integrated in the chip conveyor: 1 high-pressure pump with 14 bar 1 high-pressure pump with 14 bar incl. 20 µm fine filter 2 flushing pumps with 3.7 bar * Control cabinet air conditioning unit * Electrostatic oil mist separator * Hydraulic unit * Machine lamp * Interface for foot switch * Documentation Included: - Handwheel - PC keyboard - Network preparation - Tool monitoring - Swing-out window - Cleaning gun - Signal lamp Year of manufacture: 2008 Machine No.: R7AW0401

Year of construction: 1982, condition: used, In Good Condition Nwodpodq Ug Iofx Aaton

Condition: used, - Adhesive application with 1 profiled roller for Packaging height 300mm over 1 application roller - The drive via worm gear motor 0.37 kW - 1 ST left - 1 ST right - Fits DIMTER HK 200 and HK 400 spare parts dimter in stock equipment in stock accessories in stock Nsdpfocht Nyox Aatewn

Condition: excellent (used), Year of construction: 1985, still very nice veneer saw with planing head cutting length 3050 mm with rear support and fence Nsdpfx Aaen An A Totewn

Condition: reconditioned (used), Working width 3500 mm Working height 2550 mm Number of cylinders 6 St. loading dimensions L x W x H 4500x950x2900 mm Hess Speedy frame press Nwsdpoxnqw Tofx Aaton ----- will be checked Insertion dimension / pressing length max. 3,500 mm Insertion dimension / pressing height max. 2,550 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 3 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 3 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Printing plate depth 100 mm width 140 mm Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and pressing process in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 2.2 kW / 400V 3 pendulum pressure plates for studio windows 1 pendulum pressure plate for pointed windows 1 extension for pendulum pressure plate 1 small parts allowance Image and video not original, show identical model ----- Price of the above mentioned machine, upon request! ----- For your information: One image shows homemade counterprofiles. This image is for illustrative purposes only. The counterprofiles are not included with this frame press. ----- (technical data according to the manufacturer - no guarantee!)