Used Prima Power Platino Fiber for sale (26)

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 14,991 h, laser hours: 8,209 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 12 mm, working range: 20 mm, 2D laser for cutting sheets Prima Power Platino Fiber 4kw. Year of Production: 2018 Ncodpfxeu A S A Us Ad Aep Hours under current 15K. Laser hours: 8200 Condition fully functional, under current in operation. More info by phone

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 66,465 h, machine/vehicle number: P5.04.01.41, Rated voltage: 3PH x 400V 1PH x 230V Rated current: 3PH x 45A 1PH x 6A Frequency: 50Hz Switching capacity: 40kA Cutting gases: Nitrogen & Oxygen Ncodpfxjykr Rnj Ad Aop Machine dimensions: 3250 x 5000mm Table dimensions: 1610 x 3000mm External additional components: Ytterbium Laser System -> YLS-4000-Cut Cosmotec cooling unit Exhaust system Descaling unit Available spare parts: Various filters & nozzles

Condition: good (used), Year of construction: 2012, The Prima Power Platino FIBER is in good condition, one owner, always serviced on time by Prima Power service representatives. For sale complete with storage. All documentation, service reports are included. Recently serviced with a full annual service. Laser cutting machine is connected, available for inspection, testing, in Ukmergė. Ncedpjqi D Sqjfx Ad Ajp Specification: Model. Serial No.: 776 E 308 Year of manufacture: 2012 Made in: Italia Power: Working area (X x Y): Weight: Laser working hours: 61484 Cuts up to: 5 mm Location: Ukmergė Available for testing: Yes If you have any further questions, we will be happy to answer them.

Year of construction: 2018, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER X-AXIS TRAVEL: 3048 mm Y-AXIS TRAVEL: 1524 mm Z-AXIS TRAVEL: 150 mm RAPID FEEDS X-Y-Z: 100 - 100 m/min WORKING AREA: 3000 x 1500 x 150 mm SOURCE: IPG Fiber 4000 ; 4000 W Nsdevghb Djpfx Ad Ajcp CONTROL UNIT: PRIMACH 30L WEIGHT: 10000 Kg OVERALL DIMENSIONS: 10500 x 3400 x 2200 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 14,991 h, laser hours: 8,209 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 12 mm, workpiece weight (max.): 1,300 kg, overall weight: 10,000 kg, total length: 3,100 mm, total width: 1,600 mm, total height: 200 mm, feed length X-axis: 3,100 mm, feed length Y-axis: 1,600 mm, feed length Z-axis: 200 mm, working range: 20 mm, Equipment: cooling unit, 2D laser for cutting sheet metam Prima Power Platino Fiber 4kw. Year of Production: 2018 Hours under current 15K. Nsdpeu A S Dxefx Ad Ajcp Laser hours: 8200 Condition fully functional, under current in operation. More info by phone

Condition: ready for operation (used), Year of construction: 2017, operating hours: 18,924 h, laser power: 3,000 W, travel distance Z-axis: 150 mm, overall weight: 11,000 kg, number of axes: 3, This 3-axis Prima Power Platino 1530 was manufactured in 2017. It features a 3 kW CO₂ laser, a working area of 3000 × 1500 mm, and can handle mild steel up to 15 mm, stainless steel up to 8 mm, and aluminum up to 6 mm. It includes an automatic pallet changer and a CNC Touch Interface. If you are looking to get high-quality laser cutting capabilities, consider the Prima Power Platino 1530 machine we have for sale. Contact us for more information. • Working area (X × Y): 3000 × 1500 mm • Positioning accuracy: ±0.05 mm • Repeatability: ±0.03 mm • Drive system: CNC-controlled with brushless servo motors • Control unit: Prima Power CNC Touch Interface • Cooling: Water-cooled • Fume extraction system: Integrated • Total operating hours: 18,924 h Ncjdox D Nyxspfx Ad Ajp Additional equipment • Automatic pallet changer

Condition: excellent (used), Year of construction: 2011, Sheet metal format: 3000x1500 mm Axes X/Y/Z: 3065/1560/150 mm Ncedpfoxxkm Njx Ad Ajp Price on request.

Condition: good (used), functionality: fully functional, Year of construction: 2000, Equipment: CE marking, PLS2500 2D laser with 2 x cutting table with usable area: 3140 x 1640 x h100mm, Axis stroke 3000x1500x150mm (XYZ), Maximum speed linear axes 40m/min (XY) and 20m/min (Z), Neck LGL France type NLEX 35, Sideros Engineering dust extraction system Ncjdoxx R A Dspfx Ad Ajp 3000W CO2 laser source DOCUMENTATION AVAILABLE. Machine dismantled and prepared for loading. It was in perfect working condition. Special price for immediate purchase.

Year of construction: 2011, condition: ready for operation (used), A Prima Power CO2 laser cutting system is available. 1) Prima Power Platino 1530, year of manufacture: 2011, travel X/Y/Z: 3000mm/1500mm/150mm, rapid traverse: 100m/min, position accuracy: 0.03mm. 2) Prima Power CP 3000, year of manufacture: 2010, laser power: 3000W, power stability: +/- 2%, wavelength: 10.6µm, laser diameter: 19mm, dimensions X/Y/Z: approx. 900mm/3100mm/900mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Available from Q1 2025. Nedpst Nhm Isfx Ad Ajcp

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 44,500 h, laser source model: CV5000, TECHNICAL DETAILS Ncodpfx Adox Hfcqj Aop Laser: CV5000 MACHINE DETAILS Operating hours: 44,500 h Note: Information regarding the machine's layout can be found in the attached document.

Condition: good (used), functionality: unexamined, Year of construction: 2019, operating hours: 28,160 h, machine/vehicle number: Z3.03.04.02, control type: CNC control, controller manufacturer: PRIMA Power, laser type: fiber laser, laser source manufacturer: IPG-Faserlaser, laser power: 6 W, table length: 4,100 mm, power: 6 kW (8.16 HP), Equipment: nozzle changer, Description: The Laser Genius LGf 2040 from PRIMA Power is a highly dynamic fiber laser cutting system, ideal for demanding metal processing and series production. Ncodpfxowv U N So Ad Aep Main Features: 6 kW IPG fiber laser for lowest operating costs and maximum uptime Working area 4,100 × 2,100 × 150 mm – precision cutting of steel, stainless steel, and aluminum up to 25 mm material thickness Positioning accuracy ± 0.03 mm and traverse speeds up to 240 m/min Automation: Compact Tower 10-pallet changover system for uninterrupted material flow ATC nozzle changer and integrated extraction/filter system Control: Intuitive Prima Power CNC touch panel Condition & Documentation: Good used condition, regularly maintained, documentation available. Professional dismantling by PRIMA Power in June 2025 Current location: 41849 Wassenberg (ready for collection) Price & Financing: Asking price net €390,000 ex works On request, we are happy to provide you with tailored leasing or financing offers. Pictures of the machine in dismantled condition can be found at the end of the listing. Note: Sale takes place without guarantee/warranty; inspection possible by appointment.

Condition: new, functionality: unexamined, Year of construction: 2024, machine/vehicle number: 16.41-PS0382, control type: CNC control, degree of automation: automatic, actuation type: electric, sheet thickness (max.): 8 mm, input voltage: 400 V, input current: 20 A, type of input current: three-phase, 2024 Pima Power PS 1225 Brand new Complete machine. Ncodpfxjw Nbh He Ad Ajp Machine was tipped on its side during transit and was damaged. Machine is stored in Our warehouse in California USA. Contact to set up in person inspection.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of Manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average Power Output: 200 W – 5000 W Peak Power Output: Up to 6 kW Wavelength: 10.6 microns Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3) Beam Divergence: 1.5 mrad (half angle) Beam Diameter at Exit: 15 mm 1/e², 21 mm full beam Pulsed Operation – Pulse Repetition Rate: 0 – 2 kHz Pulse Duration: 250 microseconds, 70 µs resolution Alignment Stability: +/- 150 µrad Operating Conditions: • Ambient temperature (max.): 40°C • Ambient temperature (min.): 10°C • Relative humidity: < 95% (non-condensing) Diode Laser: • Wavelength: 635 nm • Output Power: < 1 mW ——— 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power requirement: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20°C • Maximum inlet pressure: 6 bar Nodpfsywwrfex Ad Aocp • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total Consumption: 20 – 70 SLPH (variable) Additional Requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2°C • Depending on shutter utilization

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average power: 200 W – 5000 W Peak power: Up to 6 kW Wavelength: Ncjdpfx Adsywwq Ue Aop 10.6 micrometers Beam quality factor (M²): < 2.4 (typically 2.1 to 2.3) Beam divergence: 1.5 mrad (half-angle) Output beam diameter: 15 mm 1/e², 21 mm full beam Pulsed operation – pulse repetition rate: 0 – 2 kHz Pulse width: 250 microseconds, 70 µs resolution Alignment stability: +/- 150 µrad Operating conditions: • Ambient temperature (max): 40 °C • Ambient temperature (min): 10 °C • Relative humidity: < 95% (non-condensing) Diode laser: • Wavelength: 635 nm • Output power: < 1 mW — 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power consumption: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20 °C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total consumption: 20 – 70 SLPH (variable) Additional requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2 °C • Depending on shutter usage

Year of construction: 2012, condition: ready for operation (used), General Data Measurements width 4000 mm Measurements depth 9000 mm Measurements height 3200 mm Machine weight 12000–14000 kg Control Unit Brand Prima Main Drive Njdpfxex D Efko Ad Ascp Number of axis 5 Laser power 3 kW This 5-axis Prima Power Rapido was manufactured in 2012, featuring a cutting area of 4080 mm (X) × 1530 mm (Y) × 765 mm (Z) and a laser power of 3000 W. It handles 3D sheet metal parts efficiently with speeds up to 60 m/min. Ideal for automotive and aerospace applications. If you are looking to get high-quality cutting capabilities consider the Prima Power Rapido machine we have for sale. Contact us for more information. Application Types Cutting

Condition: good (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: 778 F 319, Lazer Cutting Fabrikat: Prima Power Ncedpfx Asmx Rrlod Asp Typ: Palatino 1530 Baujahr: 2012

Condition: ready for operation (used), Year of construction: 2023, This Prima Power Laser Genius + 1530 was manufactured in 2023. It features an 8kw laser with chiller, open cabins on both sides, safety glasses on doors, and a high-capacity dust collector. It includes advanced cutting technologies like NIGHT Cut, SMART Cut, and MAX Cut, plus an ATC automatic tip changer with 20 nozzle stations. Consider the opportunity to buy this Prima Power Laser Genius + 1530 fiber laser cutting machine. Contact us for more information. Additional equipment • Laser with 8kw and chiller • Open Cabin with right and left side accessible doors • Safety glasses on the doors • NIGHT Cut for safer cutting and piercing process • SMART Cut for faster processing of thin material • MAX Cut for piercing process time reduction for thick material Ncedex D Ebrspfx Ad Ajp • Gas Mixer Cut • Nozzle check and OPC by camera • Adaptive cut • ATC automatic tip changer with 20 nozzle stations Machine Benefits Technical Machine Benefits • Dust collector for high production (3200m3/h) with 6 cartridges • Automatic selector for additional cutting gas • Uninterruptible power supply (ups) • Fleet manager remote care via tosibox • Interface to nt or automation connection • Interface for psr 2d Extra Information Machine still under power

Condition: used, Year of construction: 2023, Opportunity to buy an outstanding fiber laser (Year 2023) with 6000x2000 mm working dimensions and 6000W laser output. Power on hours: 14500 Cutting hours: ca 4900 Can be inspected under power upon appointment. Availability: 03/2026 More detailed information on request. Ncsdpsxyxcuefx Ad Aep X: 6320 mm Y: 2,200 mm Z: 150 mm Fiber laser source: 6000W Axis speed: 130 m/min (trajectory 180 m/min)

Condition: like new (used), functionality: fully functional, Year of construction: 2019, Scrap conveyor was installed on a Laser Next 1530 built in 2019, but was only used sporadically and was eventually dismantled. All parts on the belts are the complete attachments to the machine. Prima Power Art. No. D5.57H Steel conveyor belt for automatic turntable. Nodpjvcpi Ijfx Ad Ajcp Conveyor length to start of high conveyor: approx. 292 cm, high conveyor length approx. 160 cm. Total length approx. 452 cm. Conveyor height approx. 140 cm. Extension approx. 366 cm. Conveyor belt width approx. 67 cm. Conveyor width approx. 94 cm. Sale ex works without guarantee and return.

Condition: excellent (used), Year of construction: 2016, For sale: Prima Power BCe Smart 2220 (2016) panel bending machine. Main advantages: Servo-electric technology – up to 60% lower energy consumption and up to 70% lower maintenance costs High bending quality and precision Compact layout, operator-friendly design Semi-automatic operation, manual sheet loading/unloading Equipped with a safety system: laser scanners, light curtains Technical specifications: Max. bending length: 2250 mm Max. sheet length: 2850 mm Max. sheet width: 1500 mm Max. panel diagonal: 3000 mm Max. bending height: 204 mm Bending force: 32 t (320 kN) Pressing force: 52 t (510 kN) Processable steel thickness: up to 3.0 mm Minimum thickness: 0.5 mm Average power consumption: 4.0 kWh Additional equipment and features: Ncodpfxjxfiw To Ad Asp Software: Master BendCam 2D, Tulus HMI Tool library, visual simulation of the bending process Remote diagnostics, user-friendly control interface Lowerable work surfaces – convenient parts handling Year: 2016 Condition: Used, well-maintained, connected, can be seen in operation. If you have any further questions, we will be happy to answer them.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 36,823 h, machine/vehicle number: PB180723002012, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Prima Power, bending force (max.): 100 t, working width: 3,000 mm, distance between stands: 3,000 mm, installation height: 2,696 mm, number of axes: 5, overall weight: 7,000 kg, total length: 4,408 mm, total width: 2,381 mm, total height: 2,696 mm, power: 10 kW (13.60 HP), input voltage: 400 V, input frequency: 50 Hz, number of support arms: 2, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, lower tooling, safety light barrier, upper tooling, For sale: fully functional press brake. The machine can be inspected by appointment. Tool holders: Wila. Offline programming software: Autopol G2. 3D visualization. Upper and lower tools available at an additional cost. Ncjdoxt Rcyspfx Ad Aep

Condition: good (used), Year of construction: 2000, Parts from Prima Power Rapido 5 Laser source Touch control P9000L / Primach 900L Ncedpfjw Shzxox Ad Aep 3D laser head spare parts and manuals

Year of construction: 2014, condition: ready for operation (used), - USED - 7-AXIS ELECTRICAL CNC PRESS BRAKE AXIS: Y1 - Y2 - X - X1 - R - Z1 - Z2 Ncodpfxexfm Ayo Ad Aop BENDING LENGTH: 3060 mm TONNAGE: 105 ton DISTANCE BETWEEN UPRIGHTS: 3150 mm UPPER BEAM TRAVEL: 310 mm APPROACH SPEED: 110 mm/sec RETURN SPEED: 110 mm/sec WORKING SPEED: 10 mm/sec CONTROL UNIT: PRIMA ELECTRO OPEN CONTROL WEIGHT: 7000 Kg OVERALL DIMENSIONS: 4406 x 1800 x 2600 mm NOTE: PNEUMATIC LOCKING OF TOP AND BOTTOM TOOLS; WILA TYPE TOOL ADAPTER; HEMMING TOOL; THICKNESS MEASUREMENT SYSTEM

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, control type: CNC control, degree of automation: automatic, controller manufacturer: ESA, controller model: ESA S550N, bending force (max.): 135 t, working width: 3,050 mm, stroke length: 400 mm, operating speed: 200 mm/s, number of axes: 8, type of crowning: CNC-controlled, oil tank capacity: 150 l, travel distance X-axis: 625 mm, back gauge adjustment: CNC-controlled, back gauge speed R-axis: 50 mm/s, back gauge travel distance R-axis: 180 mm, back gauge travel distance Z-axis: 2,100 mm, overall weight: 9,500 kg, number of support arms: 2, pressing force: 135 t, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, safety light barrier, A very well-equipped machine with Y1 / Y2 / X / X1 / R / Z1 / Z2 axes and hydraulic upper and lower tool clamping. The control unit has just been overhauled by the manufacturer, and the machine works flawlessly. Nedpfxowqhw Es Ad Ajcp

Condition: good (used), functionality: fully functional, Year of construction: 2015, operating hours: 10,740 h, machine/vehicle number: 1951 F 262, laser power: 4,000 W, travel distance X-axis: 4,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,020 mm, swivel angle B-axis (min.): -135 °, swivel angle B-axis (max.): 135 °, TECHNICAL DETAILS Linear axis travel paths (XYZ): 4,500 x 2,500 x 1,020 mm Ncsdsxd Um Ropfx Ad Asp Rotary axis travel paths: A-axis ± 360º continuous, B-axis ± 135º C-axis: ± 10 mm Max. speed of linear axes (XYZ): 50 m/min Combined speed of linear axes: 85 m/min Max. speed of rotary axes A, B: 540 °/s Acceleration of rotary axes A, B: 60 rad/s² Laser type: CV4000 Laser Installed laser source power: 4,000 W MACHINE DETAILS Operating hours: 10,740 h Power supply: 400 V, three-phase, 50 Hz Installed cooling unit power: 53 kW / 58 kVA Extraction and dust collection system power: 15 kW / 18 kVA EQUIPMENT - OPTIMO machine - CNC control panel: P30L S/N 15/40 - 0083-01 - Prima Power remote control, serial number: 14/06 00489 - Hyfra Sigma 52-S cooling system - Donaldson DFPRO12 extraction and dust collection system - Donaldson MD2 micro-dosing system The machine is powered, however, air and gas supply are required. These are not available on site. Dismantling and loading can be arranged by a company for approx. €22,000.