Used Alldos Primus Serie for sale (3,173)

Condition: excellent (used), Primus Engineering Type: DST 350 This test device was designed to carry out IP protection class tests “dust” according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test device is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical output: Max. 5 KW Connection voltage: 400V/50HZ 3-Ν/ΡΕ (16AEEC socket) Dimensions: Width approx. 920 mm Depth approx. 710 mm Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm Depth approx. 650 mm Height approx. 770 mm Volume approx. 350 I Mass: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Working climate range: Temperature: +12 °C to +30 °C Humidity: 25% rel. H. to 75% rel. F., Ljdpfxert U Nue Afzshb non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected ΙΡ5Χ and IP5KX Dust-tight ΙΡ6Χ and IP6KX with and without vacuum Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Type: DST 1000 Description: For sale is a dust test chamber, type DST1000, from Testzentrum Baden GmbH. This unit was developed for conducting IP protection class “dust” tests (DIN EN 60529 / DIN 40050 Part 9). Testing possible with or without vacuum. Operation / Features: - Control panel with display and buttons - Manual regulators for individual settings - Preset test routines for standardized testing Technical Data: - Test chamber volume: approx. 1,000 liters - Internal dimensions (W × D × H): approx. 1,000 × 1,000 × 1,000 mm - Overall dimensions (W × D × H): approx. 1,300 × 1,000 × 2,000 mm - Supply voltage: 400 V / 50 Hz, 3~N/PE - Current consumption: 10 A - Total electric power: max. 2 kW - Exhaust connection: DN100 flange Lhjdpoxpfx Usfx Afzeb Test Performance / Protection Classes: - Dust-protected IP5X - Dust-tight IP6X Weight: approx. 350 kg Condition: used Scope of delivery: (See image) (Specifications are subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: new, functionality: fully functional, A new control system for your machine – modern servos – new controller – up to 6 axes Lhjdpfsxz Dkgsx Afzjb The Retrofit Kit V2.0 enables the existing scale of Maho 600 Series industrial machines to continue being used. Previously, digital operation required feedback from the motor to the servo amplifier. With the analog system, position feedback is routed to the CSMIO. This means that the motor encoder is now only required for the servo drives, no longer for the CNC controller. As a result, pitch errors can be eliminated thanks to the direct measurement approach. The kit for the Deckel Maho 600 Series includes: - 1 x Delta B3 Controller with 1500-watt output - 1 x Delta B3 Motor 1500 watts with brake - 2 x Delta B3 Controllers with 1000-watt output each - 2 x Delta B3 Motors 1000 watts - 2 x 5-meter encoder cables - 2 x 5-meter motor cables without brake - 1 x 3-meter encoder cable - 1 x 3-meter motor cable with brake - 2 x B3 plug-in boards without brake incl. 3 patch cables per board - 1 x B3 plug-in board with brake incl. 3 patch cables per board - 1 x BIG IO interface module - 1 x Maho Deckel & Co connection board - 2 x encoder boards - 1 x Digital Input 12-23 board - 1 x patch cable set - 1 x CSMIO IP-A controller - 1 x milling SIM software with customized interface - 1 x 24 V 10A power supply - 1 x power distribution unit with LED display - 1 x C2000 4.0 kW frequency inverter We are also happy to provide you with a quote for Deckel, Mikro, etc.

Condition: new, Year of construction: 2023, Extraction capacity of filter unit at spigot*: 2600 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 65 db(A) Dimensions L/W/H in mm: L 975 / W 508 /H 545 Colour: RAL 7035 Weight: 90 kg Manufacturer: ISI Industrieprodukte GmbH Lhsdpfxeh Rdxno Afzeb *Depending on filter equipment Special voltage or special colour on request Application: Extraction of oil mist, emulsion mist (for emulsions with higher oil contents) and smoke, for small to very large machine workrooms | Oil mist separator. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as Option and can be controlled, for example, with a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: new, Discover our selection of robust and precise conventional lathes! Are you in search of a reliable lathe that boosts your productivity? Experience precision and performance with our new conventional lathes equipped with a wide range of accessories. Our machines offer turning diameters from 400-1000mm and turning lengths up to 10m, also available as a cycle variant. With various models, you have limitless possibilities. Some machines are quickly available from stock! Explore our extensive special accessories, such as hollow spindle, infinitely variable speeds, Siemens controls, and more, to make your lathe even more versatile. Whether for complex workpieces or demanding tasks, our machines always deliver the best results. Trust in our long-standing experience and let us optimize your machining processes together. Invest in quality and precision - contact us today! Here's a selection of STOCK MACHINES (see images), and we are happy to offer additional models or special machines upon request: Technical Main Data: DLZ Series including 15% or more BAFA subsidy! - Turning diameter over bed: 400-1000 mm - Turning length: 1000/1500/2000/3000 mm - Spindle bore: 80 (opt. 105) mm - Workpiece weight up to 2t - Spindle speed up to 2800 rpm Accessories: Digital display, 3-jaw chuck, faceplate, Multifix tool holder, and more. Extensive SPECIAL ACCESSORIES such as infinitely variable speed, steady rests, larger spindle bore, and more to make the machine even more productive. Lhodpfx Aed Afn Isfzsb Currently available new machines with warranty and BAFA subsidy, for example: - SDM 850: Turning diameter over bed 850mm, turning length 3m - DLZ 325: Turning diameter over bed 650mm, turning length 2m and 3m - DLZ 250: Turning diameter over bed 500mm, turning length 1m and 1.5m - DLZ 200: Turning diameter over bed 400mm, turning length (missing information) More models (also with cycle control) available on request. Contact us now and discover the world of innovative turning technology! Our service for you: - Consultation and solution finding at your location - Organization of machine transport to your facility - Installation, assembly, commissioning, and ready-to-use handover - Financing and exploration of funding opportunities through KFW and BAFA, and more.

Condition: excellent (used), COSTA LEVIGATORS Series S model SN 5-groups first group electronic sectioned transverse belt second group 1 roller third group 1 roller fourth group electronic sectioned pad super finisher fifth group electronic sectioned transverse belt machine width 1350 vacuum inverter on all belt groups inverter on belt outfeed brush group blower group on outlet Lhsdpfer Iyvmex Afzjb

Condition: used, Year of construction: 2000, Overview  This PET blow-moulding machine was manufactured in 2000 by French company SIDEL. The machine is currently in good working condition, running in production until the end of November 2025. It will be dismantled and craned out through the roof, with craning scheduled for December 2025. It becomes available after dismantling. Technical data Capacity: 7,600 bph on 1.0 L Formats: Neck finish 29/21 Preforms processed: RPET Plastipak & Resilux Number of moulds: 6 (moulds not included) Equipment & Features: Quick change for shell molds Sidel caterpillar oven 6 heating modules Sidel preforms tipper Sidel preforms hopper & feeder Sidel preforms infeed rail Sidel caterpillar oven & blowing wheel Solenoid valves Sidel Universal type Sidel PCC version V2.02 Sidel CE electrical cabinet (Siemens) Service history: Sidel maintenance completed September 2024 Elongation sensor retrofitted Additional service by client’s technicians Scope of Delivery  Stretch blow-moulder SIDEL SBO 6 Series 2 Preforms tipper Preforms hopper & feeder Preforms infeed rail Caterpillar oven & blowing wheel Lhodpfx Afjyb Tbpezjb

Condition: good (used), Year of construction: 2002, Kuka KR150L110 Robot Series 2000 Year of manufacture: 2002 Reach: 3100 mm Weight: 1245 kg Payload: 110 kg Controller: KRC2 Weight: 185 kg Lsdpfx Aobcgw Nsfzshb Software version: V4.1.7 SP08 Kuka KCP2 Connection cables: 7 m / 15 m 22126ä

Condition: good (used), Year of construction: 2002, Robot Kuka KR210L180 Series 2000 Year of manufacture: 2002 Reach: 2700 mm Weight: 1245 kg Payload: 180 kg Control unit: KRC2 Control unit weight: 185 kg Software version: V4.1.7 SP08 Lhedpfx Ae Tx Tuofzsb Kuka KCP2 Connection cables: 7 m 22126ä

Condition: good (used), Year of construction: 2002, Kuka KR150 Robot Series 2000 Year of manufacture: 2002 Reach: 2700 mm Lodpfx Aebhgxbjfzehb Weight: 1245 kg Payload: 150 kg Controller: KRC2 Controller weight: 185 kg Software version: V4.1.7 SP08 Kuka KCP2 Connection cables: 7m/15m 22126ä

Condition: good (used), Year of construction: 2004, Robot Kuka KR210 series 2000 Year of construction 2004 Reach 2700 mm Weight 1245 kg Load capacity 210 kg Control VKRC2 (VW / Audi version) Weight 185 kg Software version V4.1.7 SP08 (standard Kuka software, no VW) Kuka KCP2 Connection lines 7m . Ljdpfxsbg Rt Ij Afzohb

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages Lhodpfxertd Uws Afzsb - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Condition: ready for operation (used), Year of construction: 2019, total height: 4,125 mm, travel distance X-axis: 1,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,200 mm, overall weight: 5,530 kg, table load: 4,500 kg, number of axes: 3, This 3-Axis Mora Primus 152012 was manufactured in 2019. It features a large measuring range with X-axis at 1500 mm, Y-axis at 2000 mm, and Z-axis at 1200 mm. Supports a maximum load of 4500 kg, ensuring robustness for various tasks. With a vector speed up to 519 mm/s, it offers efficient operations. If you are looking to get high quality measuring capabilities consider the Mora Primus 152012 machine we have for sale. Contact us for more information. Additional equipment • 3-axis CNC controller, Pantec SP25/SP600 interface, EAGLE PAD joystick (6.5 m) • Renishaw PH10M (720 positions, 7.5°) + PHC10-2 controller • Renishaw SP25M full kit: SM25-1/-2/-3 (with SH25-1/-2/-3), TM25-20 adapter; extra SM25-4 (with SH25-4) & SM25-5 (with SH25-5) • Extensive M2/M3 stylus kits (Ø 0.3–30 mm, extensions), M2↔M3 / M3↔M2 adapters • FCR25 + FCR25-TC (3+3-port, temperature-controlled) with MRS1000/MRS600 rail system • Ø 30 mm reference sphere • INCA3D Premium (DCC): Shape Deviation, Path Wizard, Simulation, Statistics, Excel reports, graphical programming, CAD import IGES/STEP, Master Scan Functions + Assist SP25, FCR25 support, USB dongles (HASPHL) • Industrial PC (e.g., Intel i5, 8 GB, 256 GB SSD, 22″ monitor, Windows 10) + color laser printer Machine Benefits Qualitative Machine Benefits • Condition: new, factory-sealed, immediate availability Technical Machine Benefits • Accuracy (iso 10360, typical with sp25m): mpee 3. 0 + l/300 µm | mpep 3. 0 µm | mpe_thp 4. 4 µm / 68 s Lodpfx Aoyaacqjfzohb • Dynamics: up to 519 mm/s | 1,732 mm/s² • Probing/scanning: renishaw ph10m + sp25m (sm25-1…-5), fcr25/fcr25-tc (temperature-controlled) • Software: inca3d premium (iges/step, scan options) • Operating conditions: 20 °c ±2 °c; temperature gradients ≤ 1 °c/h and ≤ 1 °c/m • Pneumatics: 6 bar, dry and oil/particle-free • Power (controller): 90–240 v, 50/60 hz, 16 a; approx. 600 va (psu up to 2,000 va) Dimensions Machine Depth 2505 mm

Year of construction: 2010, condition: used, HB THERM 140 Z 2 (2010) 16KW Measurement range 0–400 °C Resolution 0.1 °C Regulation accuracy ±0.1 K Tolerance ±0.8 K Flow measurement Measuring range 0.4–40 l/min Resolution 0.1 l/min Regulation accuracy ±0.1 l/min Tolerance ±(5% of measured value + 0.1 L/min) Pressure measurement Lhedsv H Ad Hjpfx Afzsb Value Unit Measuring range 0–20 bar Resolution 0.1 bar Tolerance ±5% of final value Technical data O8360-CS 2023-08 25 3.2 Emission value unit Permanent sound pressure level 55 °C 3.3 Operating conditions Temperature range 5–40 °C Relative humidity* 35–85 % RH Minimum free space (→ picture) A 10 mm B 50 mm C 150 mm D 50 mm E 70 mm

Year of construction: 2004, condition: good (used), Robot Kuka KR210 series 2000 Year of construction: 2002/2004 Reach: 2700 mm Weight: 1245 kg Load capacity: 210 kg Control VKRC2 (VW / Audi version) Weight 185 kg Lodpfx Afs Tx Tpjzehb Software version V4.1.7 SP08 (standard Kuka software, no VW) Kuka KCP2 Connection lines 7 m ..

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and feed spindle table lathe in excellent condition! Lhsdpfov Tyzcsx Afzsb Technical specifications: >> Machine no. 2801 >> Center height 120 mm >> Center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore 23 mm >> Short-taper spindle head DIN 55027 >> Tailstock MT 2 >> Feed rates from 0.03 to 0.15 mm/rev >> Possible thread sizes: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x Röhm 125 mm three-jaw chuck with 4 sets of jaws >> Collet chuck with collets from 2 mm to 12 mm, increments of 1 mm Drawbar >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle cover >> Clamping tool About the machine: Offered is a Weiler Primus table lathe with guide rail and drawbar in very good condition. The machine is fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus comes from a state-owned company where it was used little. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a polished finish. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition. (The base cabinet is included; the machine is not bolted to the machine.) A digital display is available for an additional charge.

Condition: used, Year of construction: 2017, Mono rotor shredder 800 series 2017 used, working Lhsdpfowcp H Sox Afzjb blades and sieve in good condition, ready for use. including switch box. 30 kW, 40 mm sieve, other sizes in consultation, rotor length 800 mm, hopper dimensions 800 x 1200 x 950 mm Depth machine is immediately available and can be inspected.

Condition: new, Year of construction: 2025, functionality: fully functional, We deliver the machines where you want them, install them if you wish by mutual agreement. Optional: stainless steel drain element, stainless steel storage silo, blower, pipes approx 3 meters. Grinder 800 series 22 kW or 37 kW 3 x 2 blade set configuration. Bwj3E79Mpn 2 x stators screen deck your request With Variablele Frequency controller, Optional Product discharge and storage in various options in combination extra favorably priced Motor power adaptable. Other adjustments can be discussed such as a rotor adjustment, more blades e.g. 5 rows of blades or heavy duty version. Delivery / time in consultation. Call or email us for consultation or if you have questions, please respond with your name, company name, and correct phone number. Without these correct details RSS Recycling Shredders and Solutions (Netherlands) cannot respond. Lhsdpfxet Iw Huj Afzsb

Condition: new, Year of construction: 2025, functionality: fully functional, RSS 2-shaft shredder 600 series 2 x 7.5 kW rotor length: 600 mm blades: 30 mm The machine can be configured to your requirements, including electrical control cabinet. Delivery time by arrangement. Infeed and discharge conveyors available on request. This shredder is ideally suited for destroying items such as hard drives, laptops, mobile phones, rubber, wood, paper, etc. Want to know more? Call or email us. On arrangement, we can also deliver and install the machines. Please respond with your name, company name, and a valid telephone number for a prompt reply. Lhodpfjw Ry Alsx Afzsb

Year of construction: 2024, condition: new, RSS 600 series Mono Rotor Shredder new model 2023 full options model. 18.5kw 40x40 knife block. rotor length approx. 600 mm infeed hopper approx. 600 x 900 mm Screen size in consultation motor cover and pusherbox guide strips as well PLC controlled with Reverse action as well an manual reverse. Conveyor and/or discharge screw is optional available. CE certificate/ Dutch suitable for various types of plastic/wood/or other material delivery in consultation Adjustments to e.g. motors, sieve, frame possible. Infeed or discharge conveyors, storage, metal separation possible. Larger or smaller models also available. Lhedpjirt H Aofx Afzob Intrested, reactions with your name, company name and telephone number. We will call you.

Condition: used, Year of construction: 2013, first registration: 06/2013, fuel type: diesel, color: white, fuel: diesel, Model year: 2013 Intended use: Internal logistics Lsdpfx Afeych Tiezohb Contact Gert Woudenberg for further information.

Condition: used, Automatic sugar coating machine Brand: Narong Industries Model: Rama NR Cota 19 series 5 DRUM DIAMETER: 19″ / 48 cm CAPACITY: 3 to 7 kg Blowing / Extraction / Rotation Option – Heating – Speed variation Lhjdsx Rz Tyjpfx Afzob – Extraction temperature measurement – Supply air temperature measurement – Spray pressure measurement – Light: interior lighting Research and development / Pilot unit

Condition: new, We supply spare parts for all machine types manufactured by ZMM SLIVEN in Bulgaria. Ledpfxeuladko Afzohb

Condition: used, empty load weight: 6,580 kg, maximum load weight: 27,420 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 06/2011, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, Schwarzmüller platform semi-trailer | BPW axles with disc brakes | Year of manufacture: 2011 | Spare wheel holder | Toolbox | Tyres: 385/65 R22.5 | Subject to errors and prior sale. Lodpfxox Uqxme Afzjhb

Condition: good (used), High-frequency ignition system, heating, gas and oil burners, gas burner control unit, gas relay, control box, burner control, burner management, UV flame simulator Ledpfxoghb Epe Afzshb -Manufacturer: Honeywell, Ultraviolet Flame Simulator -Type: 203659 7800 Series Burner Control -Cardboard dimensions: 130/90/H80 mm -Weight: 0.2 kg