Used Cable Ties for sale (4,001)

Year of construction: 2008, condition: excellent (used), Electric heating rod Shock- and impact-resistant heating insert system with heating conductors embedded in silicone for airtight sealing. No wear, no corrosion, reliable operation even in continuous operation and under shocks and vibrations. Temperature setting via integrated controller with insulated control knob. Permanently connected industrial cable, no vulnerable plug connections. High-strength special aluminum profile for high load capacity and flat pressure surfaces on all sides. Standard gold-anodized finish, scratch- and abrasion-resistant, easy to clean. Lodpfx Ajlcd Szokqjru Size: Type: EST 21 Length: 2100 mm Connection value: 1100 watts, 230 volts Temperature: 0 / 40 / 70 / 100 / 170 / 200 degrees Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, AL-KO Colour Jet 1 Paint Mist Extraction System Paint mist extraction system, ready for operation, with a 1 m² filter area including a pre-filter and a fine filter. Connection diameter: 300 mm, motor: 1.5 kW (suitable for installation in Zone 22 according to ATEX), switch: 1-stage, plus a 5 m cable with plug and throttle valve. Compact, space-saving steel sheet construction. Ledpfx Aobumr Sekqjru Chassis with wheels. Indirect extraction near the floor. Completely pre-assembled. With connection cable and phase reversal device. Adjustable side panels. Optimized spray mist extraction through a patented front panel hood. Long filter life. High-performance fans with low noise levels. Filter wall with special mats. Exhaust nozzle with integrated throttle valve. Motor power: 1.5 kW Speed: 1400 rpm Nominal volume flow: 4600 m³/h Pressure: 500 Pa Dimensions (W*H*D): 1025*1437*1214 mm (W = 2000 mm with side panels) Filter area: 1 m² Weight: 175 kg

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160 For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft For wood shavings and wood dust. Designed for commercial use. Ljdpfocnw T Iox Akqjru All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood shavings and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Also suitable for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip collection containers with clamping bracket and chip collection bag. System is fully assembled upon delivery, allowing for quick deployment. Mobile. Description of the filter: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standardly tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a novel locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug 5-pin and phase reverser 2 swivel casters and 2 fixed casters with parking brake Manual cleaning Model: RLA 160 Article No.: 5131620 Technical data: Intake port diameter: 160 mm Nominal air flow: 1448 m³/h Max. air flow: 2400 m³/h Negative pressure at Vnenn: 2247 Pa Filter area: 9.21 m² Filter material: Dust class M Residual dust content: H3 (< 0.1 mg/m³) Filter cleaning: Compressed air supply: Chip collection volume: 2 x 193 l Supply voltage: 400 V Supply frequency: 50 Hz Motor power: 2.2 kW Sound pressure level max.: 73 dB(A) Dimensions (length x width x height): 1681 x 830 x 1654 mm Weight: 254 kg Location: Available from stock in 54634 Bitburg.

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood chips and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Can also be used for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip containers with clamping bracket and chip collection bag. The system is fully assembled upon delivery, allowing for quick deployment. Mobile. Filter description: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standard and tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of supply: Lrjdscnw U Dspfx Akqeu Metal fan impeller. Inspection opening for cleaning the bypass filter. Connection cable 5 m with CEE plug 5-pole and phase inverter. 2 swivel castors and 2 fixed castors with parking brake. Preparation for connection of machine detection for up to 8 machines and slide valve controls. Manual cleaning. Sound pressure attenuator available as an accessory. Model: RLA 125 M Article no.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal volume flow: 1095 m³/h Max. volume flow: Vacuum at Vnenn: Filter area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from the lower edge of the extraction port to the ground: 850 mm Weight: 194 kg Location: Arriving at warehouse 54634 Bitburg.

Condition: as good as new (ex-display), Year of construction: 2025, minimax ti 55es LL – Table saw The illustration shows the T 55 i elite s in its standard version. The professional machine for skilled tradespeople, featuring a pivoting milling spindle and 4 speeds. M Digital: motor-driven height adjustment and pivoting. Sturdy steel and cast iron construction. Oversized milling unit made of cast iron, pivoting up to -45° to the rear. LED display of milling speeds. Fast, trouble-free speed change via eccentric clamping. Clockwise/counterclockwise rotation. Display of height and inclination with 1/10 mm accuracy. Heavy-duty professional fence: with fine adjustment via rack and pinion, with numerical display, aluminum fence cheeks, 3-way positioning for quick repetition of the setting. Scope of delivery: Aluminum fence cheeks Arched milling guard Table extension on the left and right Model: minimax ti 55es LL Article no.: 5502252 Technical data Dimensions of the work table: 2500 x 655 mm Dimensions of the format sliding table Usable length of the spindle: 125 mm Max. tool diameter: 240 mm Max. tool diameter (lowered): 230 mm Max. tool diameter (dovetail cutter): 320 mm Spindle inclination: 0 to -45 degrees Speeds: 3500/6000/8000/10000 min-1 Lredpfx Akjdqzh Roqju Motor power 400 V/ 50 Hz / S6-40%: 5.0 kW Dust extraction port diameter: 2 x 120 mm

Condition: new, empty load weight: 3,650 kg, maximum load weight: 6,350 kg, overall weight: 10,000 kg, axle configuration: 2 axles, loading space length: 6,250 mm, loading space width: 2,480 mm, loading space height: 2,420 mm, loading space volume: 37 m³, suspension: air, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, tail-lift, Dautel DL 1500 tail lift, load capacity 1,500 kg, 4 cylinders, aluminum platform 1,800 mm long, 2 roll-off safety devices, with own batteries and charging cable, side wall thickness approx. 17 mm, , Front with portal doors for through-loading with short drive-over plate, , 2 rows of combination lashing rails, 6 pairs of lashing eyes embedded in the floor, , Rental price from 720 ¤ per month, , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Lrjdpfxe Aazihj Akqsu

Condition: used, Year of construction: 1966, Technical details: bore capacity in steel (diameter): 63 mm arm length:: 2000 workpiece height max.: 1270 mm spindle taper MT: MK 5 drill depth: 400 (Hub) mm quill stroke: 400 mm feed: 0,05 - 0,32 m/min revolutions per minute spindle:: 14 - 1000 (40/50/63/160+200 o.Funktion) U/min column turnable: 360 ° electrics - voltage/frequency: 380/50 V/Hz base plate: 1900 x 950 mm total power requirement: 13 kW weight of the machine ca.: 7,9 t space requirements approx. LxWxH: 3,9 x 1,5 x 3,4 m This radial drilling machine has an electric sliding table! Further features: - Distance from spindle center to stand: 360 - 2000mm - Distance from drill chuck to table top: 1270mm Lrsdpfx Akju Id Dboqsu - Distance from spindle to base plate: 1220 - 4520mm - Drilling capacity in St 60: 63mm at feed rate 0.32 - Drilling capacity in GG 22: 80mm at feed rate 0.5 - Horizontal travel of the drilling head: 1640mm - Vertical travel of the drill head: 980mm - Distance from spindle nose to base plate: 430-1770mm Equipment: - Coolant pump (out of function) - Support stand - 1 electrically driven sliding table 1250 x 1000mm type TI 18 with digital display (interface to the machine) - incl. machine vice Not all revolutions are currently selectable. i.D. *

Condition: used, Year of construction: 2004, Technical details: table diameter: 400 mm table turning speeds: stufenlos U/min tilting range table plate: 90 ° voltage: 230 V / Hz V connected load: 11,8 kVA machine weight approx.: 220 + 173 kg POSITIONER - ROTARY TABLE with welding source Messer Griesheim Application: for circumferential seam welding Welding device: Welding rectifier Messer Griesheim Variomatic 40 for MIG-MAG, direct current; protection class IP 23; cooling type F with remote control Stepless current/drain feed, 4.0 meter hose package Torch head Ljdpsu Nkxhofx Akqoru Ground clamp/ground cable Size: L: 1.1 x W: 0.5 x H: 1.3 Weight approx. 279kg Welding turntable MB Milano, TGA 75: swiveling welding turntable up to 90° allows horizontal and vertical welding (direction of rotation left and right) Infinitely variable speed; operation via control panel and/or foot control stands on transport trolley Size: L: 0.8 x W: 0.6 x H: 1.3 Weight approx. 173kg Wire feeder type Eurotrac SLV, feed rate 1.2 - 18 m/min *

Condition: used, Technical details: Lrodpfsu R A Dlox Akqju length: 750 mm height: 800 mm welding current: 120 machine weight ab.: 180 kg dimensions L x W x H: Schweißgerät: 0,75 x 0,52 x 0,8 m dimensions L x W x H: Kompressor: 1,2 x 0,5 x 0,9 m Plasma cutter with piston compressor optional cutting device: make Jäckle, year: 2005 - cutting power 30 kVA - TIG / E-welding - cooling type F - with torch package 6,0 meter - with ground cable 12,0 meter OPTIONAL: piston compressor: make Schneider type Universal 650-60D, year: 1993 - filling capacity 500 liters/min. - volume flow 616 liters/min. - Compressor pressure 10 bar - power max. 4 kW - incl. compressed air hose approx. 4 meters - mobile on two wheels *

Condition: used, Technical details: max. temperature: 150° Grad voltage: 380 Volt V / Hz current- max.: 6,5 A weight: 65 kg dimensions L x W x H: 0,68 x 0,22 x 0,58 m Working Area / Application: water tempering system transportable - connection coolant water: inlet and outlet Ø 12mm internal with bayonet connection - connection circulating medium: inlet and outlet Ø 12mm with bayonet connection - control via control panel Lredpfx Asu N Ag Rekqou equipment: - 1400mm connection cable Optional test run possible. *

Condition: used, Technical details: power consumption: 2,3 kVA open-circuit voltage: 56 - 198 V protection class: IP 44 weight of the machine approx.: ca. 35 kg dimensions of the machine approx. HxWxD: 0,4x0,3x0,27 m equipment: - incl. earth cable and 3 pcs bolt taper for dia 2x 5mm and 1 x 6mm tested functional Lsdpfx Akou Nwxzoqeru *

Condition: used, Technical details: Lredpfxeu Nwaxs Akqsu welding current - continuous: 320 A protection class: IP21 total power requirement: 17 kVA kVA weight of the machine approx.: 132 kg dimensions of machine: 1,3 x 0,6 x 0,9 m TIG with 2-stroke; 4-stroke; spot welding and pulse welding Switching from 2-stroke to 4-stroke Cooling mode AF New components like: -hose package 4.0 meter, water cooled -mass tongs and mass cable 4.0 meters -pressure reducer *

Condition: used, Technical details: welding current - continuous: 320 / 100 A protection class: IP21 total power requirement: 17 kVA kVA weight of the machine approx.: 132 kg dimensions of machine: 1,3 x 0,5 x 0,9 m - TIG welding with direct current - TIG welding with pulsed current - E-hand welding Control switchover 2/4 cycle spot welding, stepless Lodpfxju Nwa So Akqeru New components like: -hose package 4,0 meter, water cooled -ground tongs and ground cable 4,0 meter -pressure reducer -TIG welding torch ERGO 301 *

Condition: used, Technical details: Ljdpfxeu Nwd Ds Akqsru power consumption: 350 A total power requirement: 17,5 kVA weight of the machine approx.: 64 kg dimensions of machine: 0,65 x 0,32 x 0,5 m Welding rectifier/inverter MIG/ MAG:40A / 14V up to 350A / 31,5 V TIG: 10A / 10V up to 350 A E-welding: 15A / 20,5V up to 350A / 34V Voltage U1: 380 - 415V Cooling type: F (water cooled) Protection class: IP 23 without hose package without grounding cable *

Condition: used, Technical details: welding current: 500 A Lrjdjwtctmspfx Akqju weight of the machine approx.: 129 kg dimensions L x W x H: 1,1x 0,7 x 1,2 m Control: Display for welding current with 2/4-cycle switchover, pulse, infinitely variable Cooling system: Water-cooled with frost protection Shielding gas: Solenoid valve without pressure reducer 3.0 m hose package Torch head: Gas-cooled Ground clamp with ground cable 2.5 m Wire feed: 4 roller drive with wire Ø 1.0/1.2 mm *

Condition: used, Technical details: Length: 1120 mm height: 1480 mm power consumption: 500 A capacity at 100% ED: 390 A capacity: 23 KVA welding current: 390 V weight of the machine approx.: 234 kg dimensions of machine: 1,12 x 0,58 x 1,48 m Ledpfx Ajwqpl Dokqjru capacity: 23 kVA Hose package with welding gun Ground cable *

Condition: used, Technical details: pressure: manuell t distance between columns: - mm stroke: ca. 20 mm machine weight approx.: 9,5 kg dimensions of machine: L: 580 x B:280 x H:80 mm pneumatic cable terminal press - application: press of cable terminal on electrical cable and air-conditioning lines Lredpfxsu Nftgj Akqsu futher details: - press cylinder: slide Ø 25mm: outer diameter Ø 68mm: maximum extension length approx 20mm - tool holder: width=40mm ; length=90mm - maunal lever Ø 30 x L:300mm equipment - toolbox with div. round and hexagonal tool jaws see the picture i.D. *

Condition: used, mytron Type: T2240 Water-cooled temperature chamber Technical data: External dimensions: Width 1435 mm, Height 1955 mm, Depth 2590 mm Dimensions of the test chamber: Width 1050 mm, Height 1400 mm, Depth 1600 mm Volume of the test chamber: approx. 2240 l Cable feed-through opening: 2 x 100 mm on the right 2 x 100 mm on the left Temperature range: -40 °C to +100 °C at 23 °C ambient temperature Temporal temperature stability: +/- 0.5 °K Spatial temperature stability: +/- 1.0 °K Cooling: Water cooling, Inlet and outlet 1" internal thread Cooling water shut-off via solenoid valve when the unit is OFF Fault indication in case of refrigeration machine failure Cooling water consumption: Inlet temperature approx. 15 °C, approx. 15 l/min, Outlet temperature approx. 22 °C (approx. 27 °C in continuous cooling) Mains connection: 3NPE AC 50 Hz 400 V, 32 A CEE plug Power consumption: approx. 6.5 kVA Fuses: 3 x 20.0 AT, 3 x 10.0 AT Lighting: 25 watts each on the left and right sides of the test chamber Exhaust connection: DN 100 mm plug-in system Safety device: Electronic overtemperature protection, permanently set Flue gas monitoring with audible alarm Viewing window: Five-pane glazing 130 x 360 mm Refrigerant: R 404 A, approx. 10 kg Weight: approx. 850 kg Condition: used Scope of delivery: (See picture) Lrsdpfx Aszizg Ujkqou (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, INFICON Hydrogen Leak Detection System / Hydrogen Leak Detector INFICON Sensistor ISH2000 with TGF10 Tracer Gas Filler Complete system for professional hydrogen leak detection with AP57 search probe. For sale is a used hydrogen leak detection system from the manufacturer INFICON. The system consists of the Sensistor ISH2000 hydrogen leak detector, the TGF10 tracer gas filler for automatic evacuation and filling of test specimens, and an AP57 search probe for precise leak detection. The hydrogen trace gas method is suitable for the fast and precise leak testing of pipelines, heat exchangers, pressure vessels, refrigeration and air conditioning components, and industrial assemblies. Technical data Manufacturer: INFICON Type: Sensistor ISH2000 Article number: 590-750 Device type: Hydrogen leak detector Made in Sweden Supply voltage: 100 - 240 VAC Mains frequency: 50 / 60 Hz Display: LCD Printer port Probe control port APC system for controlling external components INFICON TGF10 Tracer Gas Filler Article number: 590-557 Connections: 4 x ISO G1/4" Manometer: -1 to +9 bar Trace gas pressure: 0 - 9 bar Compressed air supply: 4 - 8 bar Evacuation rate: 70 Nl/min Ultimate vacuum: -0.85 bar Filling rate: 600 Nl/min Dimensions: approx. 100 x 275 x 205 mm Weight: approx. 4.7 kg Functions Hydrogen leak detection with forming gas Automatic evacuation of test specimens Automatic filling with trace gas Leak detection with AP57 search probe Acoustic and visual leak indication APC-controlled test sequences Suitable for industrial use for series and individual tests Equipment INFICON Sensistor ISH2000 INFICON TGF10 Tracer Gas Filler INFICON AP57 Counter Flow Probe Connection cable Power cable Original packaging ISH2000 Original packaging TGF10 Accessories as shown in the pictures Application areas Industrial leak detection Leak testing Pipeline testing Heat exchanger testing Refrigeration and air conditioning technology Pressure vessel testing Automotive industry Manufacturing and testing systems Scope of delivery 1x INFICON Sensistor ISH2000 1x INFICON TGF10 Tracer Gas Filler 1x INFICON AP57 Search Probe 1x Cable set 1x Power cable Original packaging Accessories as shown in the pictures Condition Used Devices come from an industrial environment Optical condition as shown in the pictures Display is active Original packaging available Normal storage and signs of use The table shown in the photos or other items not explicitly mentioned Lredpfozdggwox Akqsu are not part of the sale. Shipping is possible. Subject to changes, errors and prior sale. We can gladly answer any further questions by phone.

Condition: used, CTS Climate Testing Chamber Type: C-70/1000-S CTS Climate Testing Chamber / Environmental Simulation Chamber Model: C-70/1000-S Water-cooled version For sale is a high-quality CTS climate testing chamber for precise temperature and climate testing in research, development, quality assurance, and industry. The unit is in used condition. See images for visual condition. Control panel, viewing window, and test specimen protection are included. Temperature and Climate Data: Test chamber volume: approx. 1000 liters Temperature range: -70 °C to +180 °C Temperature change rate: approx. 2.5 K/min (heating) Temperature change rate: approx. 2.5 K/min (cooling) Humidity range: 10 % to 98 % RH Dew point range I: +7 °C to +94 °C Dew point range II: -10 °C to +7 °C Electrical Data: Electrical connection: 400 V / 3/N / 50 Hz Rated power: 9.7 kW Rated current: 17.9 A Protection class: IP 22 Refrigerant according to nameplate: Pre-cooling stage: R404A – 2.3 kg Cooling stage: R23 – 0.86 kg / 15 bar Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Equipment / Features: CTS control panel with LCD display Digital setpoint and actual value display Program operation Viewing window in the door Stainless steel test chamber Test specimen protection / temperature limiter Interior lighting Side cable glands Glands approx. 50 mm and approx. 125 mm RS232 interface according to documentation Digital outputs for test specimen control Mobile version on rollers Dimensions according to layout plan: External dimensions: approx. 2245 x 1270 x 1950 mm Installation dimensions: approx. 2350 x 1290 x 2000 mm Weight of test chamber: approx. 1000 kg Documentation: Declaration of conformity available Test certificates available Operating manual available Layout plan available Quick start guide available For your security as a buyer: The following steps can be carried out in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Scope of delivery: CTS Climate Testing Chamber C-70/1000-S Documentation as available Scope of delivery as shown in the pictures Condition & Notes: Condition: used Inspection possible by arrangement. Loading via forklift can be arranged. Changes, prior sale and errors in the technical data are subject to change. Lsdpfx Akjy Iam Hsqjru If you have any questions, please do not hesitate to contact us.

Condition: used, Espec Climate testing chamber / Temperature testing chamber Espec PL-4J Climate testing chamber Temperature and climate testing chamber, water-cooled For sale is a used climate testing chamber from the manufacturer ESPEC Corp. The testing chamber is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: ESPEC Corp. Lredpfx Akozntunjqeu Type: PL-4J Device type: Climate testing chamber / Temperature testing chamber Year of manufacture: 2018 Testing chamber volume: approx. 800 liters Weight: approx. 610 kg Temperature range: -40 °C to +100 °C Temperature change rate (heating): approx. 3 K/min Temperature change rate (cooling): approx. 2 K/min Humidity range: 10 to 98 % RH Refrigerant: R452A Refrigerant quantity: 1.16 kg + 0.36 kg Power connection: AC 400 V / 3~ / 50 Hz Max. current consumption: 21 A Internal dimensions (W × H × D): approx. 1000 × 1000 × 800 mm External dimensions (W × H × D): approx. 1410 × 1970 × 1273 mm Equipment Touchscreen control Program control Temperature and humidity control Stainless steel interior Viewing window with interior lighting 100 mm cable gland Water-cooled condenser Castors for easy transport Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of supply 1x ESPEC PL-4J Climate testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers beforehand: 1. Functional check and replacement of any necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Vötschtechnik Climate chamber / Temperature chamber Vötschtechnik ClimeEvent C/340/70/5 Temperature and climate chamber, water-cooled For sale is a used climate chamber from Vötschtechnik GmbH. The chamber is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, and development and stress testing. Technical data Manufacturer: Vötschtechnik GmbH Type: ClimeEvent C/340/70/5 Device type: Climate chamber / Temperature chamber Year of manufacture: 2018 Test chamber volume: approx. 340 liters Weight: approx. 650 kg External dimensions (H x W x D): approx. 1830 x 900 x 1890 mm Internal dimensions (H x W x D): approx. 750 x 580 x 765 mm Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 7 K/min Temperature change rate (cooling): approx. 6.7 K/min Max. heat compensation: approx. 3000 W Temperature deviation (over time): ±0.1 to ±0.5 K Temperature homogeneity (spatially): ±0.5 to ±1 K Temperature gradient: ≤2 K Climate range (temperature): +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Humidity deviation (over time): ±1 to ±3 % RH Temperature deviation (over time, climate mode): ±0.1 to ±0.3 K Temperature homogeneity (spatially, climate mode): ±0.5 to ±1 K Refrigerant: R449A / R23 Refrigerant quantity: 2.50 kg / 0.75 kg Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 8.6 kW Rated current: 21 A Sound pressure level: approx. 57 dB(A) Features Touchscreen control Interior made of stainless steel Large viewing window Interior lighting Water-cooled design Side cable entry Multiple insertion levels Ethernet interface USB interface Accessories according to images Application areas Temperature testing Lrodpfjznvxisx Akqsu Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition according to images Scope of supply 1x Vötschtechnik ClimeEvent C/340/70/5 climate chamber Accessories according to images Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Vötschtechnik Climate test chamber / Temperature test chamber Vötschtechnik ClimeEvent C/340/70/5 Temperature and climate test chamber, water-cooled For sale is a used climate test chamber from Vötschtechnik GmbH. The test chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötschtechnik GmbH Type: ClimeEvent C/340/70/5 Device type: Climate test chamber / Temperature test chamber Year of construction: 2018 Test chamber volume: approx. 340 liters Weight: approx. 650 kg External dimensions (H x W x D): approx. 1830 x 900 x 1890 mm Internal dimensions (H x W x D): approx. 750 x 580 x 765 mm Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 7 K/min Temperature change rate (cooling): approx. 6.7 K/min Max. heat compensation: approx. 3000 W Temperature deviation (time): ±0.1 to ±0.5 K Temperature homogeneity (spatial): ±0.5 to ±1 K Temperature gradient: ≤2 K Climate range (temperature): +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Humidity deviation (time): ±1 to ±3 % RH Temperature deviation (time, climate operation): ±0.1 to ±0.3 K Temperature homogeneity (spatial, climate operation): ±0.5 to ±1 K Refrigerant: R449A / R23 Refrigerant quantity: 2.50 kg / 0.75 kg Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A Sound pressure level: approx. 57 dB(A) Equipment Touchscreen control Stainless steel interior Large viewing window Interior lighting Water-cooled version Side cable entry Multiple shelf levels Ethernet interface USB interface Accessories as shown in the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Ledpfxjzznx Io Akqeru Condition Used Optical condition as shown in the pictures Scope of supply 1x Vötschtechnik ClimeEvent C/340/70/5 climate test chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. Documented test run after successful inspection Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Vötsch Climate testing chamber / temperature testing chamber Vötsch VCS³ 7034-5 climate testing chamber Water-cooled With a temperature change rate of 5 K/min For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Equipment type: Climate testing chamber / temperature testing chamber Test chamber volume: approx. 335 liters External dimensions: Width 870 x Depth 1700 x Height 1775 mm Test chamber dimensions: Width 580 x Depth 765 x Height 750 mm Weight: approx. 570 kg Temperature range: -70 °C to +180 °C Temperature change rate, heating: approx. 7.0 K/min Temperature change rate, cooling: approx. 8.0 K/min Max. heat compensation: 3000 W at +20 °C / 3000 W at -20 °C Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±2.0 K Climate range, temperature: +10 °C to +95 °C Dew point range: +4 °C to +94 °C (extended to -3 °C, intermittently) Humidity range: 10 to 98 % RH Humidity deviation: ±1 to ±3 % RH Refrigerant: R404A / R-23 Refrigerant quantity: R404A 2.5 kg / R-23 0.75 kg ND max.: 21 bar(g) HD max.: 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A On-site protection: 63 A slow-blow fuse Equipment: S!MPAC control system Touch panel operation Lredpfez Akcfex Akqeu Interior made of stainless steel Temperature and humidity control Ethernet interface USB interface Cable entry 50 mm Cable entry 125 mm Test specimen protection function Accessories as shown in the pictures Application areas: Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition: Used Visual condition as shown in the pictures Scope of delivery: 1x Vötsch VCS³ 7034-5 climate testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful check Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Vötsch Type: VT³ 4100 Water-cooled temperature test chamber S!MCON/ (with touch panel) Features of this controller: Color touchscreen with intuitive menu (usually 5.7" or larger) Programming of temperature/humidity profiles with ramps and dwell times Data acquisition & logging (e.g., temperature profile, alarms) USB port for data export (CSV, optionally S!MPATI-compatible) Network interface (Ethernet) for remote monitoring and control Lrjdpfx Ajziyxpekqou User management with password protection Interfaces: Potential-free contacts, optionally Modbus or Profibus VT³ 4100 – Technical data (temperature test chamber) Test volume: 990 liters Temperature range: -40 °C to +180 °C Temperature deviation over time: ±0.1 to ±0.5 K Temperature deviation within the chamber: ±0.5 to ±1.5 K Temperature gradient: 1 to 3 K Temperature change rate (according to IEC 60068-3-5): Heating: 4.0 K/min Cooling: 3.0 K/min Heat dissipation capacity (max): 4500 W Calibration values: +23 °C and +80 °C Internal dimensions (W×D×H): 1100 × 950 × 950 mm External dimensions (W×D×H): 1390 × 1955 × 1995 mm Feedthroughs: The test chamber is equipped with feedthroughs on the left and right sides. These allow measurement cables and testing equipment to be placed in the test chamber. 1 x L1 NW 50 mm 1 x R1 NW 125 mm 3 x R1 NW 50 mm Electrical connection: 3/N/PE AC, 400V ±10%, 50Hz Power consumption: 11.5 kW Rated current: 22 A Noise level: approx. 62 dB(A) Refrigerant R452A Weight: 920 kg For your security as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.