Used Recycling for sale (2,275)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Place: Austria Cgsdpfsxy Rddjx Albeu Available immediately

Condition: new, Year of construction: 2025, Minimum requirements for the forklift: 4 wheels; at least 2 tons lifting capacity; an additional oil channel available; fork length not less than 1200 mm; fork cross-section: maximum width 150 mm, maximum thickness 60 mm; minimum fork spacing: 700 mm. Codpfx Ajxy N Dpelbjgu

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, conveyor belt length: 2,500 mm, conveyor belt width: 900 mm, conveyor belt speed: 4,000 mm/s, total width: 1,560 mm, total height: 2,500 mm, overall weight: 700 kg, power: 5 kW (6.80 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 16 A, Equipment: documentation/manual, emergency stop, Inside width: 430 mm Inside depth: 550 mm Length: 7300 mm Driving power: 15 kW Driving Speed: 38 1/min Operating voltage: 3 x 400 V AC + PEN, 50 Hz Cjdsfhxagopfx Albogu

Condition: ready for operation (used), Year of construction: 2001, operating hours: 56,927 h, functionality: fully functional, Manufacturer: ATM Recyclingsystems GmbH Model: ArnoBrik 15 Year of manufacture: 2001 Briquette diameter: 150 mm Technical Data Briquette diameter: 140 or 150 mm Capacity: - Cast iron chips: 4.8 – 5.3 t/h - Steel chips: 4 – 5 t/h Cgodexy E H Hjpfx Albou - Mixed briquetting: 4 – 5 t/h - Aluminium chips: 1.6 – 1.8 t/h Mixed briquetting: 4 – 4.5 t/h Tyre wire: 2.5 – 3 t/h Hourly throughput depending on material Briquette density for steel and cast iron: 5.5 kg/dm³ Operating pressure: 300 bar Required space (L x W x H): 13,500 x 6,500 x 2,000 mm Machine weight: 30 t Main cylinder force: 5,300 kN Oil requirement: 2,800 litres Main drive: 4 x 30 kW Connected load including ancillary equipment: approx. 150 kW Briquette height: 110 - 140 mm Briquette weight – depending on material: approx. 10 - 16 kg Cycle time: approx. 10 sec

Condition: ready for operation (used), Year of construction: 2011, operating hours: 180 h, functionality: fully functional, Place: Austria Available immediately Cgsdpsxy Idhjfx Albou

Condition: refurbished (used), Force pressing cylinder: 2 x 1100 kN Capactiy cars: 30 -40 p/h Bale dimensions: 3,9 x 1,9 x 0,4 m x m Loading height: 1,32 m Cycle time: 60 s Power: 22 kW Weight: 22 t Cedpfx Ashgibhslbegu Dimensions: 7,5 x 2,8 x 3,0 Manual operation Mobile unit

Condition: like new (used), Year of construction: 2001, functionality: limited functionality, Force Presscylinder: 6000 KN Steel, Gush: 16 to/h Aluminium: 6-8 to/h Cgjdpfx Alsxy Hbxsbsu Driving Power: 2x22 kW Arrangement Surface 7,1x3,3 Machnie weight: 51 to Place: Austria Available immediately

Condition: like new (used), functionality: fully functional, RMVI-3030-1-015 Cgodpoxy Imijfx Albju RMVI-3030-1-014 RMVI-3030-1-013 RMVI-3030-1-012 RMVI-3030-1-011 MR-2002-4-27

Condition: new, Year of construction: 2025, functionality: fully functional, Place: Austria Available immediately Cgjdpfexy Nkpox Albsu

Condition: used, Year of construction: 1988, operating hours: 1 h, machine/vehicle number: V 516, total width: 2,000 mm, total length: 7,000 mm, total height: 1,800 mm, operating pressure: 300 bar, pressing force: 90 t, sheet thickness aluminum (max.): 5 mm, power: 11 kW (14.96 HP), empty load weight: 16,000 kg, cutting force: 90 t, year of last overhaul: 2025, Bale size 400x400 mm Force 1 Step 900 KN Force 2 Step 900 KN Steel max. 2500-3500 Kg/Std. Aluminium max. 2000 - 3000 Kg/Std. Driving Power 11 KW Arrangement Surface 7x2x2,5 m x m Machine weight 16 to Place: Austria Aviable: 30.01.2025 Csdpfx Ajlhqd Rslbjgu

Condition: ready for operation (used), Year of construction: 2014, operating hours: 7,822 h, functionality: fully functional, Manufacturer: ATM Type: ArnoBrik 10 Year of manufacture: 2014 Briquette diameter: 105 mm Technical Data Main Dimensions Length x Width x Height: 4,250 x 3,600 x 2,200 mm Weight approx.: 10 t Briquette diameter: 105 mm Briquette height depending on material: approx. 60 - 120 mm Performance Data Cycle time: 10 sec. Hourly capacity: - Aluminium: 850 - 1,060 kg/h Cedpfoxy E Evox Albegu - Steel, cast: 1,800 – 2,000 kg/h - Nickel: 1,800 – 2,000 kg/h Briquette weight (aluminium): 2.0 – 2.5 kg Briquette density (steel, cast): 5.5 kg/dm³ Briquette density (aluminium): 2.2 – 2.5 kg/dm³ Hydraulic System Number of power-regulated axial piston pumps: 2 units Power requirement per pump unit: 30 kW Operating pressure: 300 bar Hydraulic tank volume: 1,300 l Electrical Equipment Drive power: 70 kW Control voltage: 24 V DC Operating voltage: 3 x 400 V / 50 Hz

Condition: like new (used), Year of construction: 2001, functionality: limited functionality, Hauptabmessungen 2965 × 1000 × 570 mm (ohne Dreheinrichtung) Cjdpfx Ajxy E Sislbjgu Gesamtgewicht 2 595 kg (ohne Dreheinrichtung) Betriebsdruck 100 bar Zylinderduckkraft 380 kN Betriebsdruck max. 160 bar Zylinderduckkraft max. 610 kN Maulöffnung ca. 300 × 300 mm Schneidleistung Rundstahl Ø 75 mm; Quadratstahl 65 × 65 mm; Rohr AD 273 × 16 mm; IP-200, C-280, L-220 Schneidmesser beidseitig verwendbar Schnittspalt einstellbar Dreheinrichtung Verdrehen über Ölmotor und Kettentrieb

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Place: Austria Codpfx Aljxy Iiksbogu Available immediately

Condition: like new (used), functionality: fully functional, Z1015201800 Cjdpexy I D Usfx Albogu Z1010880270 etc.

Condition: used, mileage: 287,000 km, power: 355 kW (482.67 HP), first registration: 09/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2022, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), parking heater, DAF XF480 AT-Boretec HS2, approx. 1,900 operating hours, well-maintained, last service at 1,760 operating hours. The HS2 system truck is a bentonite mixing and recycling system designed for use in complex drilling projects. With its 45 kVA generator, the HS2 provides a powerful and reliable solution. The system is equipped with ten cyclones and three centrifugal pumps, each rated at 7.5 kW, ensuring efficient processing and transfer of drilling fluids. The shaker features three dual-deck flatscreens with six screens in total, allowing for thorough screening and cleaning. The total tank capacity is 12,000 liters, divided into three tanks, providing ample capacity for drilling fluids. Additionally, the HS2 includes a 1,100-liter fresh water tank. The HS2 system truck is integrated in a BDF container construction, offering maximum flexibility and mobility for operations at various sites. It also comes with a tank capacity increased by 4,000 liters, resulting in a total of 12,000 liters. Construction Description: SYSTEMTRUCK HS2 The most proven all-rounder with a total tank volume of 12m³ (5 + 5 + 2), sold over 200 times since 2015 and continuously improved for ongoing successful operation. Optimally designed for drilling rigs in the 15–25 t performance class. The three KSB centrifugal pumps, each with a flow rate of 1,100 l/min (7.5 kW), are powered by an underfloor-installed 50 kVA generator. Csdpfjzamu Hox Albogu Max. cleaning performance of up to 150 m³/day or 15 m³/h Centrifuge option: For drilling rigs with small, high-pressure bentonite quick-runner pumps to significantly increase service life; 10 hydrocyclones to separate fine solids: 2.2 bar. Mixing and recycling system in an ISO container frame Also usable as a full-fledged permanent mixing plant with 2 × 5 m³ working tanks. Empty weight, depending on chassis and due to high-quality lightweight construction, is approx. 17 t Mounted on a 3-axle, 26 t chassis 3 dual-deck flatscreen shakers with 6 screens for removal of coarse solids 1,100 l fresh water tank capacity TECHNICAL DATA: SYSTEMTRUCK HS2 CARRIER VEHICLE: Permissible gross vehicle weight: 26 t BDF CONTAINER L x W x H (mm): 7,450 x 2,550 x 2,950 Total weight (incl. truck): 17,000 kg TANK SYSTEM: Total tank volume: 12,000 l Tank 1: 5,000 l Tank 2: 5,000 l Tank 3: 2,000 l Fresh water tank volume: 1,100 l RECYCLING SYSTEM Shaker: 3 dual-deck flatscreen units Total number of screens: 6 Shaker inclination adjustment: manual (hydraulic) Number of hydrocyclones: 10 (4?) Number of centrifugal pumps: 3 Centrifugal pump rating: 7.5 kW Centrifuge: 1 Number of agitators: 3 Agitator power (Tank 1): 1.5 kW Agitator power (Tank 2): 1.5 kW Agitator power (Tank 3): 0.9 kW Cleaning capacity: up to 150 m³/day GENERATOR Generator output: 50 kVA Emission standard: Stage V Installation: Underfloor AT-Boretec HS2 HS2 Bentonite Mixing and Recycling System, year of manufacture 2022 DAF truck first registration: 2019 Truck with AT-Boretec HS2 with registration as a self-propelled work machine. Bentonite mixing and recycling systems – The use of the HDD system truck provides the following advantages: * Significant savings on fresh water and bentonite * Cost savings on bentonite disposal due to recycling * Substantial reduction in drilling downtime by eliminating waiting times for water refueling, mixing, and disposal * Strong reduction in ...

Year of construction: 1999, condition: ready for operation (used), functionality: fully functional, pressure: 58 bar, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Pressure range: approx. 58 bar Cgsdpjzaqu Defx Albou Air consumption: approx. 1,000 to 3,000 l/min FEATURES Blasting process: Compressed air blasting Rotating table Workpiece clamping: Rotary table Operation: Glove operation Blasting hose: High-pressure blasting hose Abrasive circulation: Recycling system included Extraction: External unit External reference: 758

Condition: used, functionality: fully functional, Year of construction: 2015, machine/vehicle number: 75E-E188, USED SHRED-TECH DUAL SHAFT 80HP (TWIN 40) SHREDDER MODEL ST-75ES MANUFACUTRED 2015 TWIN 40 HP MOTORS DUTTING CHAMBER OF 956mm/37" X 635mm/25" DISCHARGE HEIGHT 1,067mm/42" THIS WAS USED IN A PLASTICS COMPANY TO SHRED PLASTICS, CARDBOARD AND LIGHT GUAGE METAL. IT IS IN VERY GOOD CONDITION, PURCHASED DUE TO A PLANT CLOSURE. IT IS CURRENTLY LOCATED IN OUR WISCONSIN WAREHOUSE. Cgodpfoxmthrsx Albeu

Condition: good (used), Used Thetford International T3 waste compactor. Cjdpfx Alehvi Ahjbogu

Condition: excellent (used), N.PREVIERO shredder Blade: 1,000 Engine: 170 kW Cgjdpfx Aljza Episbou Complete with conveyors and dosing systems.

Condition: excellent (used), Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology -Condition: Mill is unused -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 Cedpfxozbk Tis Albjgu -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Inlet: Ø 400 mm -Ejection: Height adjustable -Rotor width: mm -Rotor diameter: mm -Number: 3 hammer mills available -Price: per piece -Dimensions: 1160/2335/H1550 mm -Weight: 2100 kg

Year of construction: 2020, condition: excellent (used), Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology -Condition: The mill was a demonstration unit equipped without a control system. -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Ejection: Height adjustable Cgsdpfezbk Iyjx Albeu -Inlet cross-section: mm -Rotor width: mm -Rotor diameter: mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 1730/220/H3200 mm -Transport dimensions: 1370/220/H1730, 1400/800/H1470 mm -Weight: 1900 kg

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Cjdpfeu Tg Spox Albogu Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: used, Technical data turn table wrapping line with top sheet despenser for fully automatic, watertight packaging of palletised goods Manufacturer UNITECH S.r.l., Via Buscaglia, 10 - 27029 VIGEVANO, Italia Typ UNIWRAP 200 AE Year of construction 2007 Throughput capacity approx. 30 pallets per hour Connected load 7,5 kW Weight 3,700 kg Stretch films, roll diameter 300 mm Roll height 500 up to 750 mm Cgedpfxou Tg Nns Albju Core diameter 76 mm Film thickness 15 to 35 micron Roll weight 25 kg Top cover PE film, roll diameter 250 mm Core diameter 76 mm PE film roll width max. 1,700 mm PE film thickness 60 to 100 micron PLC Siemens Simatic S7-200 PLC panel Siemens OP 77A Installation dimensions Wrappinmg unit 3,400 x 3,100 x 3,900 mm (l x w x h) Dimensions roller conveyor 10,000 x 1,150 x 570 mm (l x w x h) Descreption: The Uniwrap 200 AE is a robust build stretch wrapping machine made of high quality components delivering reliability in the long term, which minimises maintenance costs. The use of the latest technologies provide total control over the pressure applied by the stretch film over the product, the pre-stretch ratio and the packaging overall holding force. The Uniwrap 200 AE includes a top-sheet applicator, programmable to client's requirements. Condition: The entire stretch wrapping line is still assembled, in really good condition, ready for immediate operation and can be inspected in operation on site. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Cgodpeu Tg I Dofx Albeu Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2007 Codpfxeu Tha Ie Albogu Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The PZA cardboard shredder was in use in a Dutch logistics centre to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 1 piece Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredder was an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machine is in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.