Used Ball Screw for sale (7,541)

Condition: excellent (used), Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: WARNER ELECTRIC -Spindles are: unused -Type: -Thread diameter: 39 mm Cedpfx Afed Iqqisxohb -Thread pitch: 5 mm -Thread length: 505 mm -Total length: 680 mm -Number: 2x spindles available -Price: per piece -Weight: 6.8 kg

Condition: excellent (used), Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: WARNER ELECTRIC -Spindles are: unused -Type: -Thread diameter: 39 mm -Thread pitch: 5 mm -Thread length: 405 mm -Total length: 580 mm -Number: 17x spindles available Chsded Iqqhspfx Afxsb -Price: per piece -Weight: 5.9 kg

Condition: used, Ball screw with SIEMENS servo motor Linear guide with SIEMENS permanent servo motor Type: 1FK6044-7AH71-1EG0 Type: 1FK7044-7AH71-1EG0 Identification No.: YF RN22 5076 01 001 Year of manufacture: 2003 Axis travel: 540 mm Overall length: 900 mm Shaft diameter: 40 mm Thread pitch: 40 mm Ball diameter: approx. 6 mm - Compact unit with servo motor and ball screw nut - Ball screw with twist-resistant guidance, drive via nut - Ball screw Ø 40 mm (hollow shaft, inner diameter = approx. 22 mm) - SIEMENS permanent servo motor, type: 1FK6044-7AH71-1EG0 (Serial No.: Identification No. YF RN22 5076 01 001) Overall dimensions L x W x H: 900 x 200 x 330 mm Weight: 30 kg Good condition Removed from a functional special machine, tested before removal. Csdpfxogi E Hdj Afxohb 8 units available The stated price refers to 1 unit.

Condition: used, Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: WARNER ELECTRIC -Spindles: are not used Chjdod Iqqdjpfx Afxjb -Type: -Thread diameter: 39 mm -Thread pitch: 5 mm -Thread length: 455 mm -Total length: 630 mm -Number: 16x spindles available -Price: per piece -Weight: 6.3 kg

Condition: used, Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod Chsdpfof R Iwuex Afxjb -Manufacturer: NTN -Thread: diameter 32 mm -Pitch: approx. 10 mm -Thread length: 482 mm -Techn. Drawing: see photos -Dimensions: 672/93/H93 mm -Weight: 9 kg

Condition: good (used), Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: Rexroth -Type: 102553 -Type: 2492458 -Thread diameter: 48 mm -Thread pitch: 30 mm Csdpfx Afecp Anmjxshb -Total length: 2285 mm -Weight: 34 kg

Condition: used, Ball screw with nut, Transroll spindle, ball screw nut, screw spindle, threaded rod, threaded bolt, threaded rod, ball screw drive, linear bearing, precision ball screw -Manufacturer: Steinmeyerr, precision ball screw Chedpfx Afjf E Rq Djxob -Shaft: Ø 15.5 mm -Thread length: 770 mm -Price: per piece -Number: 2 piece -Dimensions: 950/45/H90 mm -Weight: 1.8 kg/piece

Condition: used, Recirculating ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod, ball screw drive, linear bearing, precision ball screw -Manufacturer: Steinmeyerr, precision ball screw -Shaft: Ø 20 mm -Thread length: 525 mm Csdpfx Afefngxdsxjhb -Dimensions: 680/100/H70 mm -Weight: 4.6 kg

Condition: used, Recirculating ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod, ball screw drive, linear bearing, precision ball screw -Manufacturer: Star, precision ball screw -Type: 1502-2-1085 Csdpfx Asfngxbofxshb -Shaft: Ø 24 mm -Thread length: 1495 mm -Dimensions: 1700/110/H70 mm -Weight: 10 kg

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2026, Ball Mill for Powder and Mining Plant: Structure, Function, and Technical Details A ball mill is a key grinding machine widely used in mining, metallurgy, cement, chemical, and powder-making industries. It is designed to grind various ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, preparing materials for flotation, magnetic separation, or leaching processes. In powder production, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on a simple yet effective principle: as the cylindrical shell rotates around its horizontal axis, the grinding media (steel or ceramic balls) are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion causes both impact and abrasion, reducing the material to the desired fineness. The grinding process can be performed in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Equipped with a feeder or screw conveyor to ensure uniform material input. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel balls or ceramic balls of different diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Suitable for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Chsdpoq Nf U Eofx Afxsb Application in Mining Plants In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. Common Applications: Gold, copper, iron, and zinc ore grinding Cement clinker and slag processing Silicate and ceramic powder production Coal and mineral powder preparation Conclusion A ball mill is an indispensable piece of equipment in both powder production and mining beneficiation plants. Its ability to grind materials into fine, uniform particles makes it vital for downstream processes such as flotation, sintering, and chemical reactions.

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Chodpoyy U Shofx Afxsb Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Year of construction: 2026, condition: new, ceramic ball mill ,Batch ball mill ,also called ceramic ball mill ,it is used for fine grinding of feldspar,quartz,clay,ore and so on.The ceramic ball mill is mainly used for material mixing, grinding,uniform product fineness,and saving power.It can be dry or wet.The machine can use different liner types according to production needs to meet different needs.The fineness of the grinding operation is controlled by the grinding time ceramic ball mill Working principle when ball mill working,steel balls inside drum will rotate with the drum to some height,and then steel balls fall down with materials to reach the point of grinding. Working Principle of Ceramic ball mill ceramic ball mill ,Intermittent ball mill grinding operation is finished in the cylinder body. When the cylinder rotates, materials ascend to a certain height and then fall along a certain path due to the balls' gravity. Two forces are generated on the balls inside. One is the force on balls through tangent direction; the other is a opposite force in the contrast to the diameter of balls, as a result of the force generated when the balls slide down. These two forces will constitute a couple for the steel balls. The balls are squeezed between the cylinder and the adjacent steel balls, so the couple can make unequal-sized friction force. The balls will orbit along with the cylinder axis and then fall down, which can produce a strong impact force on the ores in the cylinder body and, as a result, the ores will be crushed. In conclusion, the ores in the cylinder body are mainly crushed by composite effect of peeling force, impact force and extrusion force. Ceramic ball mill also named Intermittent ball mill which adopts the wet intermittent operation, is used for fine grinding and mixing the material such as feldspar, quartz, clay ceramic raw materials. The discharging and the mud size can through through 1000 sieve pore. This machine is high milling machinery, materials should be Broken in the fineness of the state into the grinding mill to get the highest efficiency and economic benefits. Cjdpfxevzx Aus Afxjhb The cement mill is key equipment for the grinding process of the cement clinker after the crushing process of it. It is mainly used in the cement silicate product industry. After long term design and manufacture of the cement mill, our company now has series of cement mill with various specifications to meet with different requirement from our customers. Features of Cement Mill Our company adopts suitable transmission methods according to different specifications. We have brim drive and center drive as transmission form. The cylinder adopts new type step lining to increase the grinding area. And it is easily repairable and changeable. The new designed separate-chambered structure adopts flexible lifting blade and fixed lifting blade and it is easily fixed and repaired. Technical Details We have different models and options for different requirements, please contact us for more info.

Condition: new, Year of construction: 2026, power: 300 kW (407.89 HP), Ball Mill for Mining & Fine Powder Making: A ball mill is a fundamental grinding device widely used in mining, metallurgy, cement, and chemical industries. It is designed to grind ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, while in powder-making industries, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on the principle of impact and friction. As the cylindrical shell rotates around its horizontal axis, the grinding media—usually steel or ceramic balls—are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion breaks down the material into fine particles. The process can be carried out in dry or wet conditions depending on the application. Chjdpfxjq Ngafj Afxob Structural Composition A standard ball mill consists of several main components: Feeding part: Ensures uniform material input through a feeder or screw conveyor. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel or ceramic balls of various diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details/Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Used for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining and Powder Production In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. In fine powder production, ball mills are used to produce materials such as silicate, ceramic powder, refractory materials, and chemical raw materials. The uniform particle size achieved by ball milling enhances product quality and performance in downstream applications. Conclusion A ball mill is an indispensable piece of equipment for both mining and fine powder making. Its ability to grind materials into fine, uniform particles makes it vital for ore beneficiation and industrial powder production. With flexible configurations, high efficiency, and reliable operation, modern ball mills provide a cost-effective and energy-efficient solution for large-scale grinding, ensuring consistent quality and productivity across diverse applications.

Condition: used, 10’-0” x 84” HARDINGE CONICAL BALL MILLS MILL SPECIFICATION Model : 10’-0” x 84” HCBM Overall Dimensions : 3050 mm diameter x 5185 mm long. Installed Power : 400 kW Chsdpfx Aszvgdlsfxob Absorbed Power : 320 kW Mill Speed : 20 rpm Lining : Chrome Iron Cast Liner Plates Media : Steel Balls (30 tonne required) Drive : Girth Gear and Pinion, Gearbox and Slip Ring Motor Trunnion Bearings : No.1 Mill - Cooper Split Roller Bearings No.2 Mill – White Metal Bearings The mills were operated by British Chrome & Chemicals Ltd (later Elementis Chromium), at their site in Cleveland, UK, processing Chrome Ore to a fineness of 99% passing 45 µm. The first mill, with the white metal bearings, was installed in around 1970. The second mill, with the Cooper Split Roller Bearings was installed in 1980. This mill is offered with a new set of Cooper Trunnion Bearings. Both mills were in operation until the site closed in 2009 and have been in storage ever since. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: used, HARDINGE Conical Ball Mill 6’-0” dia x 36” ball mill for the dry grinding of industrial minerals. Chsdszvgvnopfx Afxob Mill fitted with Manganese steel liners for operation will steel ball grinding media. White Metal Bearings on trunnions. 90 kW Motor fitted (could be reduced to 75 kW). Mill with countershaft drive but could be converted to gearbox.

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. Codpfxsy H Aizs Afxehb FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete YOM 1991 Chjdeyb Sdijpfx Afxeb Made in Germany Good working condition

Year of construction: 2023, operating hours: 200 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 230608, 4. Main Extruder Type: CWT95-Plus co-rotating twin-screw extruder; L/D 48 Machine Description: *IE5 AC 250 kW motor *Gearbox: Precise balancing principle applied to increase torque level; High safety factor design; Latest steel alloy material for gears, applied with special heat treatment and manufactured to a high level of precision; Imported NSK bearings and sealing rings; Special lubrication system combined with immersion and forced lubrication solutions; Latest generation plate heat exchanger configured for optimal cooling; Input/output rotation speed: 1480/600 rpm; Torque: 2x1990 N.M Oil pump: 1.5 kW With heat exchanger, flow meter, oil pressure gauge *Power Transmission: Compomac safety clutch torque limiter from Italy, with speed sensor *Extrusion Line: Screw diameter: 93 mm, L/D: 48:1; Maximum screw speed: 600 rpm; Screw configuration: modular structure, torque transmission via splines; Screw material: W6Mo5Cr4V2, surface hardness HRC58～64; Barrel configuration: modular structure, each barrel with a length of 4L/D; The inner surface of the linear material is made of α101, surface hardness is HRC62-64; Barrel No.1: Feeder for all possible components, No. 4 and No. 6 with a side feed port and a venting port. No. 8, 9, 11 with a suction port for degassing. The screw profile will be determined based on the requirement. *2 side feeders for lateral feeding *1 set of degassing adapted to the needs Liquid ring pump, 1m3 water tank, gas and vapor recovery system *Electrical Cabinet Enclosure: Rittal Heat Exchanger: Apex Cjdpfx Aszxxifofxohb Variable Frequency Drives: ABB PLC: Siemens Components: Schneider Electric *Spare Parts One set of screw and barrel elements and one set of shafts will be delivered with the machine.

Condition: used, Falling Ball Viscometer like Thermo HAAKE Type C Cedpfxoxcbnrs Afxjhb THERMO ELECTRONIC CORPORATION Type 002-7580 Serial No.: With the Thermo falling ball viscometer, you can measure viscosity precisely without electricity, using only a stopwatch. It allows for accurate measurement of the viscosity of transparent Newtonian liquids and gases. Measuring principle: A ball moves by rolling and sliding inside an inclined cylindrical tube filled with the liquid to be tested. The time it takes for the ball to travel a defined measuring distance is recorded. By swiveling the measuring section, the return movement of the ball can also be used for measurement. The result is displayed as dynamic viscosity in mPa·s. Max. viscosity: 100,000 mPa·s Min. viscosity: 0.5 mPa·s Standards: DIN 53015, ISO 12058 Reproducibility: < 0.5% Thermometer: -1 °C to +26 °C (read-out accuracy 0.1 °C) Ball set Type 800-0182 with 6 balls (balls 1 and 2 made of borosilicate glass; balls 3, 4, 5 and 6 made of nickel-iron alloy) Recommended for: Chemical industry (polymer solutions, solvents, printing inks) Pharmaceutical industry (raw materials, glycerin) Mineral oil industry (oils, liquid hydrocarbons) - Inner glass tube (falling tube) damaged on one side at the screw socket (see images). Replacement part no. 002-6968 Dimensions of inner tube: outer diameter 20 mm; inner diameter 16 mm; wall thickness 2 mm; length 225 mm Dimensions (W x H x D): 170 x 310 x 220 mm Weight: 3.5 kg

Condition: used, Year of construction: 1984, operating hours: 29,950 h, functionality: unexamined, machine/vehicle number: 6051, Used BOGE screw compressor, model VEX 40D11, from industrial stock. Robust, proven technology with documented operating hours, control system, and cooling. Suitable for workshops, backup operation, or further use. Technical data: - Power: 30 kW - Volumetric flow rate: approx. 4.0 m³/min - Maximum pressure: 10 bar - Speed: 4,360 rpm - Connection: 380/400 V, three-phase - Current operating hour counter: 12,622.7 h - Documented previous counter reading: 17,326.4 h - Documented total hours: approx. 29,950 h - Base load/idle control via pressure switch FF142 Codpfjzrn Ahex Afxjhb - Switching range: 8.5–9.5 bar - WILO industrial circulation pump Condition: used and commensurate with its age. In operation until dismantling; no functional test currently performed, therefore functionality is unverified. Sold as is, as viewed, or according to the photos. Location: 65618 Selters (Taunus), Germany.

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Format: 400×300 mm Pressure: 3 tons Chsdpfxozt H Uxo Afxsb Made in Germany.

Condition: like new (used), Kaeser M30 PE screw compressor on a trailer The unit is in perfect condition, like new. The unit was purchased from a warehouse and has never been used. Only 50 hours of operation. Technical specifications: Operating pressure: 7 bar 18.2 kW motor Automatic start Capacity: 3 m3/min Cjdozlaa Eepfx Afxehb Weight: 595 kg Year of manufacture: 2022/12

Condition: ready for operation (used), Manufacturer: H&G Codezp Ipiepfx Afxshb Model: HG/SV 11 Weight: 1800 kg Engine power: 11 kW

Condition: like new (used), Year of construction: 2014, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 1058, overall weight: 7,000 kg, total length: 3,706 mm, total width: 2,276 mm, total height: 2,360 mm, power: 315 kW (428.28 HP), volume flow: 2,382 m³/h, operating pressure: 15 bar, pressure (min.): 4 bar, pressure (max.): 15 bar, noise level: 79 dB, type of cooling: air, Equipment: compressor, documentation/manual, type plate available, Kaeser FSD571SFC, 315kW Variable speed drive screw compressor, purchased and installed in 2014, the machines were never commissioned or used, so have only 2 hours manufacturers hours use. Can be viewed running in our facility in York UK prior to purchase Chjdpfozww H Tjx Afxeb

Condition: like new (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, total length: 2,000 mm, total width: 800 mm, total height: 1,850 mm, power: 15 kW (20.39 HP), volume flow: 147.6 m³/h, operating pressure: 8 bar, noise level: 73 dB, Equipment: refrigerant dryer, We are offering this Champion FM15 screw compressor in like-new condition, manufactured in 2020. Manufacturer: Champion Model: FM15 Year of manufacture: 2020 Less than 500 operating hours. Engine power: 15 kW Air flow at 8 bar: 2460 liters/minute Noise level: 73 dB(A) Pressure tank: 500 l Dimensions: 2000x800x1850 mm DRYTEC MDD-100 air dryer with approximately 1000 operating hours. Cjdpjzwxnljfx Afxjhb If you have any further questions or require more information, please feel free to send us a message or call us.