Used Pistons for sale (1,862)

Condition: good (used), Year of construction: 2020, pressure (max.): 10 bar, noise level: 68 dB, Double-piston compressor with dryer Brand: KAESER Model: KCT 401-100 Year: 2020 Type: Double-piston and oil-free (dry-running) Pressure: 10 Bar Flow rate: 275 Liters/min. Power: 2.4KW (3.2Hp) Tank: 100 Liters Sound level: 68dB Three-phase 380V Dedjz E R Dxepfx Acpecn - Suitable for continuous use: Unlike conventional piston compressors, the KCT series compressor blocks from Kaeser are designed for a 100% duty cycle. - Typical applications: Dentistry, laboratories, pharmaceutical sector, medical technology, food packaging, and the electronics industry where completely clean air is required according to ISO 8573-1 Class 0 standard. Air dryer: - Brand: Kaeser - Model: TAH7 KRYOSEC - Single-phase 220V - Flow rate: 600 Liters/min. - Environmentally friendly refrigerant: R-513A - Weight: 24Kg - Plate heat exchanger: Made of stainless steel with low pressure drop. - Integrated condensate drain: Equipped with an electronic condensate drain ECO-DRAIN as standard (does not lose compressed air during discharge). - Hot gas regulation: Prevents internal freezing when the unit operates at low air load.

Condition: good (used), Year of construction: 2001, Air-powered airless pump on a pump cart The T2001 piston pumps are robustly designed, air-powered airless pumps developed for conveying, transferring, and spraying with multiple guns. The parts in contact with the material are made of stainless steel, hard metal, PTFE, or PE. Djdpfx Acort Uy Nspscn An ATEX approval for use in potentially explosive areas completes the picture and makes the pumps versatile. Below, you will find the advantages at a glance: - Minimal pulsation for a consistent material flow during conveying and spraying - Versatile due to stainless steel, hard metal, PTFE, or PE in the material area - Suitable for liquid solvents and water-based materials - Easy start-up thanks to a self-priming system - Maintenance-free device, no lubrication required - Integrated safety valve in accordance with accident prevention regulations - Mobile versions on pump carts - ATEX approval Ex II 2 Gc IIB T6 Manufacturer: Kopperschmidt Spritztechnik Device type: T2001-60.135 Maximum material flow rate: 9.0 l/min Suction height (empty pump): 1.5 m water column Suction height (filled pump): 6.5 m water column Material temperature: +10 to +85 °C Maximum stroke frequency (short-term): 50 strokes/min Maximum stroke frequency (continuous): 20 strokes/min Maximum material overpressure: 6 bar Gear ratio: 60:1 Volume per cycle: 270 ccm Permissible operating overpressure: max. 360 bar ATEX: Ex II 2 Gc IIB T6 Air connection: G3/4“ Material outlet: G3/8“ Material inlet: G1″ Weight: 45 kg Customs tariff number: 8424 8970 Year of manufacture: 2001 New price: 13,600 € including VAT You can find more items in other sizes – new and used – in our shop! International shipping costs on request!

Year of construction: 2013, condition: excellent (used), Scheugenpflug DOS P016 Piston Dispenser Piston dispensing system DOS P for a wide range of requirements The piston dispensing systems from Scheugenpflug operate according to the principle of volumetric dispensing, meaning that the dispensed material volume is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting compound via the corresponding material feed system. When a two-component medium is used, the volume of the two cylinders simultaneously determines the ratio of the resin and hardener components to each other. The dispensing pistons push the two components simultaneously through separate channels towards the outlet valve, where they first mix into a homogeneous reactive medium in the static mixing tube. The DOS P016 / TCA piston dispensing systems are highly precise volumetric dispensing systems designed for processing 1K and 2K materials and cover a wide range of requirements. Precisely dimensioned dispensing cylinders enable the dispensing of reproducible material volumes. In the case of 2K materials, the parallel emptying of both cylinders into the common mixing tube creates a consistently constant mixing ratio at all times, thus ensuring the highest process reliability. At the same time, pressure-, moisture-, or shear-sensitive potting compounds can also be handled gently without any fear of material changes. Users also benefit from simple and fast maintenance, high uptime, and significantly reduced maintenance costs. With optional features such as valve monitoring, mixing tube heating, or dispensing head heating, these systems can be flexibly adapted to the respective application. Your advantages No dependence of dispensing accuracy on temperature, pressure, or viscosity Consistently constant mixing ratio at all times due to parallel emptying of the dispensing cylinders Wide range of applications (in terms of materials and applications) Important functions Simultaneous extrusion of the cylinders by a common drive mechanism enables a homogeneous mixing ratio Sensor-based monitoring of the inlet and outlet valves as well as the cylinder filling level Temperature control of the material via mixing tube heating (optional) Dispensing needle monitoring with camera (optional) Product data General Materials: 1K and 2K Viscosity: From liquid to highly viscous Fillers: Filled and/or abrasive media Operating principle: Volumetric dispensing Properties Constant mixing ratio for 2K Independent of temperature, material feed pressure, and viscosity of the casting resin Exactly reproducible and highly precise results Highest process reliability Application Potting, sealing, bonding, application of thermally conductive materials, encapsulation (Glob Top) DOS P016 Max. volume/shot 2K at ratio 1:1 1K: 0.06/17 ml 2K: 0.1/32 ml Dispensing speed max. 1 [ml/s]: 2 Dispensing accuracy at max. stroke [%]: < 0.5 Heatable up to max. 2 [°C]: 80 Outlets: 1K: 1-4, 6, 8 2K: 1-4 Weight: 14 kg Dimensions (W x H x D) 290 x 350 x 230 mm Video on how it works "Everything from one source: We will gladly offer you suitable bank financing for your project." More dispensers - new and used - can be found in our shop! International shipping costs on request! Dodpfxezc Nplo Acpocn

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,222 h, functionality: fully functional, machine/vehicle number: ya3064249n0867271, overall weight: 2,450 kg, fuel type: diesel, operating pressure: 14 bar, Equipment: type plate available, For sale is a powerful, mobile screw compressor, an Atlas Copco XAS 188-14 PACE S5. The machine is in good used condition and only shows the usual signs of wear and tear from use. The compressor is ideal for professional applications in sandblasting, abrasive blasting, construction, renovation, industry, and the operation of high-performance pneumatic tools. Thanks to the PACE technology, the required working pressure can be flexibly adjusted to suit the specific application. Technical data: Manufacturer: Atlas Copco Model: XAS 188-14 PACE S5 Operating hours: approx. 2,222 h Fuel: Diesel Engine: John Deere, 4-cylinder Engine power: 104 kW / approx. 141 hp Working pressure: 5–14 bar Air flow rate: up to approx. 10.9 m³/min Emission stage: Stage V Control system: Atlas Copco PACE Dcsdpfx Aezzp N Iocpjn Sound power level: 99 dB(A) Design: mobile compressor on a single-axle chassis Braked chassis with drawbar Emergency stop and electronic control system are available The compressor can be inspected and test-run by appointment.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: API628950, Technical characteristics: Core Specifications Attribute Motor Power Max Operating Pressure Free Air Delivery (FAD) Cooling Type Noise Level Drive Type Dcodpfx Aexx Snbecpon Integrated Dryer Voltage Dimensions (L×W×H) Weight Performance & Features Elektronikon® Touch Controller: Advanced microprocessor for monitoring, control, and remote access. RDX Synthetic Oil: Long-life lubrication for reduced maintenance. Energy Efficiency: Specific power as low as 18.9 kW/100 CFM, depending on load. Integrated Refrigerated Dryer: Ensures clean, dry air with minimal pressure drop. Oil-Water Separator: Built-in for environmental compliance and air purity. Reliability & Maintenance IP55-rated motor: Dust and water-resistant for harsh environments. No-loss condensate drain: Prevents compressed air waste and reduces downtime. Sound-insulated bodywork: Minimizes noise and vibration Machine status: WORKING

Condition: used, machine/vehicle number: 1811, 18er Valve Monobloc volumetric piston filler with 6 head capper filling valves: 18 capacity / hour ca.: 9000 capping heads: 6 Dcedpfx Acez Ibzaepsn working direction: right-left (CCW)

Condition: ready for operation (used), Year of construction: 1996, operating hours: 5,387 h, functionality: fully functional, overall weight: 191 kg, total length: 1,500 mm, The machine was a backup unit intended to ensure uninterrupted operation, but its capacity is now too small for our needs, so we are selling it. We’ve only turned it on occasionally over the past 10 years or so. It can be tested on-site. Dcjdpfx Acsy Ncn Aepon

Condition: used, Machine: Rotary piston pump 10.000 ltr/h cooled Dcsdpfsz Ialkex Acpon

Condition: used, Year of construction: 1992, Weinig UNIMAT 17 A comb, 6 spindles + universal, with pneumatic feeder for long pieces, functional, used. Optionals: Dcjdpfxsz I Thlj Acpsn code 926030 Return belt from 5500 mm with stacking unit 4-piston pneumatic ejector code 926031

Condition: used, Year of construction: 2023, operating hours: 2,044 h, We are offering this used Atlas Copco XATS 138 piston compressor, manufactured in 2023, for sale. Manufacturer: Atlas Copco Dcodpfx Aezvmnqscpsn Model: XATS 138 Emission stage: Stage V Operating hours: 2044 h Operating pressure: 0.0 bar Speed: min⁻¹ If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2018, two compressors: price per unit 9,000.00. Dcjdez Eqpzspfx Acpjn

Condition: good (used), SCA pneumatically driven piston pump Max. temperature: 100 °C Material pressure: 350 bar Dimensions: H x W x D 2400 x 1200 x 800 mm You can find more new and used items in our shop! International shipping costs available upon request! Dcjdpfjwxw R Rex Acpjn

Condition: excellent (used), SCA air-powered piston pump Dcodpfewxw U Asx Acpen SCA PPK57-200P8-R-E Max. temperature: 100 °C Material pressure: 350 bar Capacity: 200 l Dimensions: 1050 x 650 x 2000 mm You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2026, operating hours: 987 h, functionality: fully functional, machine/vehicle number: 31681614, overall weight: 415 kg, power: 8 kW (10.88 HP), volume flow: 1.14 m³/h, operating pressure: 10 bar, noise level: 81 dB, Equipment: refrigerant dryer, used prototype (immediately available): RENNER Riko 1400/500 M-KT Piston Compressor with 2 x 4.0 kW piston compressors with RENNERtronic Touch control (base load change control + runtime limitation) wall mounting box with galvanized 500-liter tank standing with refrigerant dryer (DTP +3°C) and timed condensate drain with automatic level-controlled tank drainage Year of manufacture: 2026 Dsdpjzb Etdsfx Acpjcn Operating hours per compressor: 987 h Technical data: Motor power: 2 x 4.0 kW Rated voltage: 400 V Maximum pressure: 10 bar Delivery volume at 7 bar: 1140 l/min Cylinders / stages: 2/2 Noise level: 81 dB(A) Compressed air tank volume: 500 liters Dimensions L x W x H: 1890 x 712 x 1446 mm Weight: 415 kg Shipping possible at extra cost. Leasing offer from our house bank possible for businesses. Takeover at the end of the term by payment of a final installment possible. Creditworthiness required. We always have a large selection of new and used compressors in stock! Immediately available.

Condition: used, Year of construction: 2010, Technical data Manufacturer / model: C.M.E. S.r.l., Ideal I360 / type 1360 Dcjdpfx Aoz Ia Aiecpon Serial number / year: Flow rate / operating pressure: 36 m³/h at 3 bar Maximum pressure: 4 bar Motor power / speed: 5.5 kW / 2,900 rpm Dimensions (L × W × H): 1,350 × 730 × 960 mm Weight: approx. 325 kg Connections: DIN 65 according to DIN 11851 Product-contact materials: AISI 316 stainless steel and NBR elastomers Suitable media: wine, destemmed grapes, must, vinegar, oil, juices, and fruit/vegetable pulp Maximum fluid temperature: approx. 70 °C Performance curves: not available Spare parts: see the operating and maintenance manual with spare-parts catalogue Machine-specific operating data according to C.M.E.; dimensions according to the “Ideal 360” manual.

Condition: used, Year of construction: 1987, Final compression pressure: 10 pe/bar Speed: 745 rpm Dodpfxexygblo Acpscn Volume flow: 3455 dm³/min Motor power: 22 kW

Condition: used, Year of construction: 2024, operating hours: 698 h, functionality: fully functional, machine/vehicle number: APP889037, overall weight: 3,500 kg, total length: 5,760 mm, total width: 1,987 mm, total height: 1,973 mm, motor manufacturer: Cummins B6,7, power: 231 kW (314.07 HP), fuel type: diesel, volume flow: 19 m³/h, pressure (max.): 25 bar, Equipment: type plate available, We are offering this used Atlas Copco X-Air+ 750-25 reciprocating compressor, manufactured in 2024, for sale. Dsdpfxjz A Dauj Acpjcn Model: X-AIR+ 750-25 Max. operating pressure: 25 bar Speed: 1920 rpm Engine power: 231 kW Permissible total weight: 3500 kg Support load: 70 kg Axle load, axle 1: 1765 kg Axle load, axle 2: 1665 kg Serial number: APP889037 Date of manufacture: 05/2024 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2023, operating hours: 448 h, machine/vehicle number: H2300010, power: 4 kW (5.44 HP), pressure (min.): 10 bar, used piston compressor available immediately: ALMIG HLA-15-10 (10 bar) The compressor has 43 operating hour and is available immediately. 3 cylinders Pressure: 10 bar Rated power: 11.0 kW Delivery quantity at 7 bar: 1220 l / min Compressed air outlet: 3/4 " Dimensions length x width x height: 1450 x 710 x 830 mm Visit our store. We always have a large selection of new and used compressors in stock! Immediately available. Dcedpjx Uwtdofx Acpon

Condition: excellent (used), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 31927596, available immediately: RENNER Riko 960/270 ST-KT piston compressor with sound box with star-delta starter Dcsdpfxoxzgile Acpon Technical data: Motor power: 5.5 kW Rated voltage: 400V Max. pressure: 10 bar Delivery quantity at 7 bar: 740 l/min Cylinder / Stages: 2/2 Sound level: 69 dB(A) Dimensions L x W x H: 985 x 722 x 802 mm Weight: 206 kg We always have a large selection of new and used compressors in stock! Available immediately.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, 1 x Reciprocating compressor Renner RIKO 700/270 ST Year of manufacture: 2016 In very good condition with only 685 operating hours. Technical data: Intake capacity: 700 l/min Delivery rate: 570 l/min Rated power: 4 kW Max. pressure: 10 bar Tank size: 270 l The compressor can be inspected while powered. Dedsznk Apspfx Acpocn

Condition: good (used), Year of construction: 1982, Piston compressor Manufacturer: BOGE Type: SB m770 Year: 1982 Dedpfx Aexq Tlxecpocn Max. pressure: 15 bar Tank: 500L. Low operating hours.

Condition: used, Year of construction: 1990, Industrial stationary piston air compressor in sound-insulated steel cabinet. Manufacturer: Reflex Model: ZU 57/3 – Typ 180 D Air receiver: 180 liters Made in Germany Complete unit including: Piston compressor Dcedjyl Nz Hopfx Acpjn Electric motor 180L air tank Pressure switch Noise reduction enclosure Condition: Used – Not tested. Sold as seen, ex works. Suitable for refurbishment or spare parts.

Condition: new, Year of construction: 2025, machine/vehicle number: 10027619, Piston compressor with intake capacity of 620 l/min, delivery capacity at 6 bar of approx. 520 l/min, maximum pressure of 10 bar, Dcodpfx Aowgcb Djcpen tank capacity of 270 l, 2 cylinders with 2 stages, speed of 920 rpm, 400 Volt, 50 Hz, 4 kW motor with Condor pressure switch and pressure gauge, including pre-filter, desiccant dryer (230 Volt), automatic tank drain (230 V), and oil/water separator, bolted onto a safety base pallet with rubber vibration dampers, immediately available, Ex Works, from the Seevetal location, excluding transport, subject to prior sale.

Condition: like new (used), TECHMI 10-Piston Automatic Filler – Stainless Steel TECHMI automatic filler with 10 pistons, designed for precise and continuous dosing and filling of liquid, semi-liquid, and viscous products in industrial production lines. The machine is equipped with 10 pistons/filling nozzles, allowing multiple containers to be filled simultaneously in each production cycle, offering an efficient solution for medium to high production industrial processes. Primarily manufactured in stainless steel, it incorporates an in-line container conveyor, a protected filling area, and a control panel for the operator. MAIN FEATURES -Manufacturer: TECHMI -Type: Automatic piston filler -Number of filling pistons: 10 -Multi-nozzle configuration -Automatic volumetric filling system -Simultaneous dosing of multiple containers -Integrated container conveyor -Automatic positioning under the nozzles -Stainless steel construction -Closed filling area with safety guards -Integrated control panel / HMI -Adjustable filling system -Designed for continuous industrial production -Integrable into automatic filling and packaging lines APPLICATION The TECHMI filler is designed for automatic volumetric dosing using a 10-piston system. The containers are automatically transported to the filling area and positioned under the nozzles. The piston system dispenses a controlled amount of product into several containers simultaneously before transferring them to the next stage of the line. The piston filling technology is particularly suitable for products that require controlled volumetric dosing, including products with higher viscosity or consistency than those typically processed by gravity filling systems. It can be integrated with: Container feeding systems Bottle and jar conveyors Capping and sealing machines Cap feeders Weight checkers Metal detectors and inspection equipment Labeling and coding equipment Stacking and end-of-line systems APPLICATIONS A solution especially suitable for food manufacturers, sauce and condiment producers, canning companies, and packaging companies that require an automatic multi-head volumetric filling system. Depending on its configuration, it can work with sauces, creams, purees, pastes, jams, tomato-based products, condiments, and other liquid or viscous products. Dcodpfezwwa Tex Acpon The 10-piston configuration allows for the simultaneous filling of multiple containers, making it particularly interesting for industrial lines that require automated and repetitive dosing. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: like new (used), Year of construction: 2023, operating hours: 180 h, functionality: fully functional, machine/vehicle number: ITR1822394, total height: 1,800 mm, space requirement length: 800 mm, space requirement width: 800 mm, space requirement height: 1,800 mm, motor manufacturer: Otto Klein, power: 52 kW (70.70 HP), operating pressure: 30 bar, type of cooling: air, For sale is a professional high-pressure compressed air station from Atlas Copco, model LT7-30UV BM. The unit was manufactured in 2023 and is in excellent, almost as-new condition. With only 179.9 operating hours, the machine is barely broken in. The LT series from Atlas Copco is the benchmark for industrial high-pressure applications and is renowned for its extreme durability, low operating temperatures, and long service life. A particular highlight is the premium, hot-dip galvanized 350-liter air receiver, specially designed for high-pressure use (up to 36 bar operating / 51.5 bar test pressure) to offer maximum corrosion protection. Technical Data Manufacturer: Atlas Copco Model: LT7-30UV BM Year of manufacture: 2023 Condition: Excellent / Nearly new Operating hours: approx. 180 h Max. operating pressure: 30 bar (435 psi) Free air delivery: 6.4 l/s (~ 23 m³/h) Motor power: 5.16 kW 400V / 3 phase / 50 Hz Speed: 1,500 rpm Receiver: 350 liters, hot-dip galvanized Certifications: CE, EAC, UKCA Reference number: 8115460928 Serial number: ITR1822394 On request, transport and loading can be arranged Europe-wide for an additional fee. Dcjdpfx Acoy Anb Ijpen Price plus VAT. Inspections available by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production facility? Or would you like to sell your equipment? For further information or to get in touch, please visit our website.