Used Pneumatic Slide for sale (14,785)

Condition: good (used), Component slide unit, pneumatic cylinder, air cylinder, pneumatic plunger, air plunger Chsdpfx Ajb A Sygeiced -Stroke travel: 50 mm -Air inlet and outlet: adjustable -Weight: 3 kg

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 604374, functionality: fully functional, operating hours: 10 h, power: 5.5 kW (7.48 HP), cutting height (max.): 150 mm, cutting width (max.): 1,350 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, Equipment: CE marking, documentation/manual, saw blade guard, scorer, MARTIN T66 Panel Saw – Showroom Machine, Year of Manufacture 2025, for Sale Technical Data Machine Type: Panel saw with pivoting saw blade Manufacturer / Model: MARTIN T66 Motor Power: 5.5 kW (main motor) Speed: Continuously adjustable from 1,000 to 6,000 rpm Cutting height at 90° (with saw blade Ø 450 mm): max. 155 mm Cutting height at 46° (with saw blade Ø 450 mm): max. 110 mm Saw blade diameter: 250 – 450 mm (bore Ø 30 mm) Saw blade swivel range: 0° – 46° Rip fence length (cutting length): 3,000 mm Sliding table: Smooth-running, hard-anodized aluminum guide, wear-resistant, self-cleaning, with replaceable cutting edge Cast iron work table: 850×1,100 mm, work height 900 mm Cutting width: 1,350 mm Length stop: Aluminum design, continuous, with error-free fine adjustment and fold-out stop extensions for angle cuts up to 2,000 mm Cross table: Steel, galvanized, with integrated fixed positions for common woodworking angles (0°, 22.5°, 30°, 45°) Net weight: approx. 1,100 – 1,400 kg Dust extraction: Connection Ø 100 mm (on the upper guard) and Ø 120 mm (in the machine stand), minimum flow rate 21 m³/min at 800 Pa Machine Configuration & Equipment Control: Ergonomic control panel at eye level with a 7.0" touchscreen (ConnectTouch) in 16:9 format; electronically controlled cutting height and cutting angle, USB interface, operating hour counter, machine diagnostics Scoring unit: Electrically adjustable 2-axis scoring unit (motor 0.75 kW, 11,500 rpm, saw blade Ø 120 mm, bore Ø 22 mm), pneumatically retractable/extendable, with ProLock quick-change system Safety lighting: Scoring unit lighting SafeLight (optical marking of the danger zone during operation) Parallel fence: Manually adjustable via handwheel with digital display of cutting width on the screen, guide on 4 radial ball bearings, dual-purpose fence ruler (upright or flat) Tool change: ProLock quick-change system for the main saw blade Electricals & Safety: CE-compliant, electronic braking system, dust extraction control, motor protection, undervoltage release, 2 emergency stop buttons, lockable main switch, voltage 3~/400 V / 50 Hz Chodpfx Aij Agnp Eocsd New price: approx. €32,000.00

Condition: used, Technical details: pressure: manuell t distance between columns: - mm stroke: ca. 20 mm machine weight approx.: 9,5 kg dimensions of machine: L: 580 x B:280 x H:80 mm pneumatic cable terminal press - application: press of cable terminal on electrical cable and air-conditioning lines futher details: - press cylinder: slide Ø 25mm: outer diameter Ø 68mm: maximum extension length approx 20mm - tool holder: width=40mm ; length=90mm - maunal lever Ø 30 x L:300mm equipment - toolbox with div. round and hexagonal tool jaws see the picture i.D. * Cedpfxju Nftgs Aicjhd

Condition: used, Technical details: pressure: manuell t stroke: 15 mm machine weight approx.: 8,4 kg dimensions of machine: 600x250x70 mm Pneumatic Cable Terminal Press - application: press of cable terminal on electrical cable and air-conditioning lines futher details: - press cylinder: slide Ø 25mm: outer diameter Ø 68mm: maximum extension length approx 15mm - tool fork: width=30mm ; length=70mm - maunal lever Ø 30 x L:300mm equipment - toolbox with div. round and hexagonal tool jaws Chjdpfxou Nfr Ne Aiced i.D. *

Condition: ready for operation (used), Year of construction: 2015, operating hours: 29,928 h, functionality: fully functional, machine/vehicle number: API124918, overall weight: 810 kg, power: 30 kW (40.79 HP), volume flow: 331.2 m³/h, pressure (max.): 10 bar, type of cooling: air, Chicago Pneumatic CPVS 40 variable speed screw compressor – 30 kW – manufactured in 2015 For sale: a well-maintained Chicago Pneumatic CPVS 40 screw compressor. This compressor features variable speed control, allowing it to efficiently adapt to the compressed air demand. The compressor has already been serviced and is ready for immediate use. Specifications: Type: Chicago Pneumatic CPVS 40 Year of manufacture: 2015 Motor power: 30 kW / 40 hp Capacity: 5.52 m³/min Chsdpfx Aiszkvb Necod Maximum working pressure: 10 bar Voltage: 400 V / 50 Hz / 3 phases Motor speed: 3,555 rpm Weight: approx. 810 kg Operating hours: 29928/27409 Variable speed control Serviced and ready for use This compressor is suitable for industrial applications where a reliable and energy-efficient compressed air supply is required. Optionally available with a new or used compressed air tank.

Condition: used, 2-axis linear guide with linear motors - Slide arm pick and place with linear guides for automation Loading unit such as Scara robot, manipulator, handling device, handling system, placement gripper, loading gripper for automation Manufacturer SCHUNK - GEMOTEC - AFAG - LINMOT Type PS01-37x240-M + E1100-MT + T01-/72/420 + EPM 37-780 Year of construction approx. 2005 Horizontal axis with linear motor Gemotec type EPM 37-780 Actuator type: EPM 37x780-M Axis module: LinMot type E1100-MT-HC Horizontal movement: 780 mm Nominal force horizontal: 160 N Horizontal speed: 2.1 m/s Horizontal acceleration: 12.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal load capacity: max. 7000 g Horizontal guide column: Ø 20 mm Vertical axis with LinMot linear motor type PS01-37x240-M Actuator type: LM01-23x80/160 Axis module: LinMot type E1100-MT Vertical movement 160 mm Nominal vertical force: 44 N Max force vertical: 203 N Vertical speed: 2.2 m/s Chsdju H R Iwspfx Aiced Vertical acceleration: 50.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal guide column: Ø 20 mm Power supply unit LinMot type T01-/72/420 (for motor supply) Input voltage: 3 x 400 V AC 50/60 Hz Output voltage: 72 V DC 420 Watt Base frame Support columns: 4 pieces Ø 55 mm Support column height adjustment: 200 mm (manual height adjustment) Mounting foot: 2 x 175 x 90 mm Control voltage: 24 V DC - Can be moved in two axes - Mounting plate for tool holder 66 x 56 mm - Integrated path measurement - Axis modules with integrated positioning control - Festo pneumatic cylinder as holding brake on the vertical axis - Horizontal axis with 3 external fans - Axis modules configurable via LinMot MPC Configurator 3.2 software Space requirement L x W x H: 1120 x 720 x 740 mm Weight: approx. 65 kg Very good condition

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: ITJ291580, power: 15 kW (20.39 HP), Equipment: compressed air system, compressor, type plate available, The Chicago Pneumatic CPVSD20 UL compressor is a 15 kW lubricated industrial unit, ideal for various applications requiring a working pressure of up to 10 bar. Although it is a used unit, this device is designed to deliver reliable and long-lasting performance in a demanding industrial environment. Chicago Pneumatic compressors are known for their energy efficiency and their ability to adapt to fluctuating compressed air needs, thanks to their advanced control system. The CPVSD20 UL model, in particular, offers an excellent balance between power and economy, making it a wise choice for users seeking to combine performance and reduced operating costs. By choosing this compressor, you benefit from a robust and proven machine, ready to be integrated into your production line or used in specific applications requiring constant pressure. It is an investment that goes hand in hand with reliability and quality, thereby ensuring uninterrupted operation for your industrial processes. Chsdpfjzfzagjx Aiced

Condition: like new (used), functionality: fully functional, Year of construction: 2008, operating hours: 1 h, machine/vehicle number: 6151922015, From our demonstration tool inventory, tested and fully functional: Used Chicago Pneumatic Redi Power RP2015 pneumatic pistol screwdriver Chodpfxsv Im Nco Aicod with shut off clutch with trigger start Output: Hex 1/4" Torque: 2.0 to 5.5 Nm / 18 - 49 in.lb Idle speed: 1470 min-1 Length: 200 mm Weight: 1.0 kg Other tools for industrial production and maintenance on request.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 6151740170, Exhibit: Chicago Pneumatic Air Chisel Hammer GV 5 Strokes per minute: 2400 Stroke: 52.5 mm Chisel shank: Hexagonal 19 mm Air consumption under load: 8.3 l/s Power: 12.2 Joules Cjdpfxoxwpitj Aicjhd Weight: 5.1 kg Overall length: 385 mm Air inlet: G 1/2 Specifically designed for heavy-duty industrial applications, the GV5 hammer combines powerful blows and an efficient impact frequency with a robust design. Thanks to its metal housing, large stroke volume, and high impact rate, the GV5 offers maximum performance and durability simultaneously. It is therefore ideal for roughening, chiseling, or cutting tasks.

Condition: new, mileage: 300 km, power: 185 kW (251.53 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, suspension: air, loading space length: 72,800 mm, loading space width: 24,800 mm, loading space height: 24,400 mm, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (available by phone at...). Iveco Eurocargo ML120E25/P 4x2, flatbed/tarpaulin + tail lift. Tail lift: Bär Type BC 1500 S4 (1,500 kg). POWERTRAIN, ZF 8AP1000 automatic gearbox, emission standard EURO VI E, Westinghouse brakes. EXTERIOR, halogen headlights, standard cab with a flat roof, grey chassis frame, exterior mirrors for a body width of 2600 mm, roof hatch, mechanical version, first-aid kit, plastic bumpers, black cab components. INTERIOR, coat rack on the rear wall of the cab including a sliding hook, rear axle ratio: 4.111, interior trim with fabric upholstery, digital 4.1 tachograph, EG design, CHASSIS, exhaust pipe in the center under the vehicle, air suspension on the rear axle, parabolic spring on the front axle, air filter unit under the cab, wheel chocks, 2 pieces, left-hand drive for right-hand traffic, engine intake air heater for optimal cold start performance at extreme temperatures, direct air intake without snorkel, jack, air dryer for the braking system, heated, C-profile steel ladder frame, chassis protection sealant Tectyl 300 G Clear, mechanical battery disconnect switch on the chassis, right side. FUEL EFFICIENCY & CONNECTIVITY, standard transmission mode, ConnectivityBox 4G, optional telematics contract, radio with Bluetooth, DAB+ and 7" display, tire pressure monitoring system (TPMS) with internal sensors, adaptive cruise control (ACC). SAFETY, lane departure warning system (LDWS), driver drowsiness warning, hill-start assist, for comfortable starting on inclines, electronic stability program (ESP), rear view monitoring system with camera, blind spot monitoring system (BSIS), right side, intelligent speed assist (ISA), front field monitoring (MOIS), autonomous emergency braking system (AEBS), pneumatic parking brake, preparation for alcohol interlock (ALC) with cable. OTHER, 24/12 Volt voltage converter (10.5 Amperes), onboard tools, two-stage engine brake, can be activated using the right steering column lever. Chsdpfxez Si Tbs Aiced POWERTRAIN, tires 285/70 R 19.5. EXTERIOR, maneuvering and towing coupling at the front. INTERIOR, leather steering wheel with function buttons for radio, telephone, cruise control and menu navigation, comfortable co-driver's bench seat for 2 people, armrest for the center seat, work surface and cup holder when the center seat is folded down, preparation for toll system (OBU), includes antenna and wiring on the dashboard without receiver, electronic immobilizer and 3rd vehicle key, smoker's package, ashtray and cigarette lighter, electrical preparation for load compartment light. CHASSIS, electrical preparation for tail lift operation according to VEHH standard, gross vehicle weight 11,990 kg (weight variant front axle: 4,800 kg / rear axle: 8,500 kg), air compressor 360 ccm, recommended for trailer operation with continuous braking system, generator 2160 Watt (24 Volt x 90 Amperes). Recommended for tail lift operation, air reservoir in aluminum design, number depends on suspension version and trailer version, weight variant front axle: 4,800 kg / rear axle: 8,500 kg. KEY FEATURES, trailer socket for 12 Volt operation, 13-pin, trailer socket for 24 Volt operation, 15-pin, trailer coupling, 40 mm, 120 kN, automatic, trailer coupling, manufacturer Rockinger, trailer version for trailer operation with...

Condition: like new (used), functionality: fully functional, Year of construction: 2023, From our demonstration tool inventory, tested and fully functional: New CHICAGO PNEUMATIC CP5080-4200H18K Universal and versatile belt sander set (new & unused) with 3 different sanding arms: Paper belt width: 13 x 457 mm 16 to 19 x 475 mm 3 to 13 x 457 mm Included in the set: Belt sander CP5080-4200H18 1 x protective cover without handle 1 x handpiece 8 x sandpaper 1 x sanding arm 13 x 457 mm 1 x sanding arm 16 to 19 x 475 mm 1 x sanding arm 3 to 13 x 457 mm 1 x carrying case Advantages: The sanding head can be rotated 360° to adapt to the working position Easy changing of abrasives and Low contact Simple and robust design Technical specifications: Csdpfx Ajv U Ad Neicohd - No-load speed: 20,000 - Power: 400 W - Paper tape width: see above under Scope of delivery - Total length: 340 mm - Weight: 1.3 kg Other tools for industrial production and maintenance are available upon request.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, power: 4 kW (5.44 HP), cutting height (max.): 105 mm, cutting width (max.): 900 mm, saw blade diameter: 315 mm, height adjustment type: mechanical, saw blade bore: 30 mm, total length: 2,000 mm, overall weight: 450 kg, Panel saw FELDER, model K700, year of manufacture 2005, with scoring saw and tilting saw blade. Sliding table 2000 mm, condition: almost new. Cods Ah Iazjpfx Aicshd

Condition: good (used), Year of construction: 2017, overall weight: 403 kg, volume flow: 199.2 m³/h, pressure (max.): 10 bar, PROD. - CHICAGO PNEUMATIC TYPE - CPVS25 S/N - ITJ109435 YEAR - 2017 CAPACITY (kW) - 18.5 OUTPUT (m3/min) - at 7.5 - 3.32, at 8.5 - 3.14 , at at 10 - 2.92 CIS (bar) - 10 Chodporb A Sfjfx Aiced INVERTER - yes

Condition: good (used), Year of construction: 1999, machine/vehicle number: 68-410235, functionality: fully functional, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, SCHMIDT HydroPneumatic Press No. 68 including safety control system (KLEINIG Engineering) and machine base frame. For sale is a SCHMIDT HydroPneumatic Press No. 68, manufactured in 1999, which underwent a complete overhaul in 2019 and was last fully inspected in 07/2025 (inspection report available). The press is equipped with a KLEINIG press safety control system KPS-SPS with two-hand operation and emergency stop. The safety control system is EC type-approved. Technical data: Manufacturer: SCHMIDT Press type: HydroPneumatic Press No. 68 Year of manufacture: 1999 Overhaul: 2019 Machine No.: 68-410235 Serial No.: 1-014-99 Pressing force: 62 kN Stroke: 100/12 mm Safety distance: 150 mm Post-travel time: 1 sec. Post-travel distance: 15 mm Cylinder working side: 2967/1998 Cylinder translator: 3723/1999 Safety control system: KLEINIG KPS-SPS Serial No.: KE00633-011 Two-hand safety control system EC type-approved Control cabinet IP54 Display with touch panel Cjdpfx Aisz Duhxecjhd Mains connection 85–264 V / 50/60 Hz Programmable digital inputs/outputs Programming port including USB cable and PLC software 2-channel pneumatic control block Two-hand buttons and emergency stop X1/X2 sockets for connection to SCHMIDT presses Including machine base frame KE 10 heavy_AL: Aluminum profile design Height-adjustable screwed feet Glare-free workstation lamp Compressed air storage tank 5-way 230 V socket strip Height-adjustable footrest Plastic worktop The press is offered complete with the described safety control system and machine base frame. Documents, operating instructions, etc. are all available. Inspection possible by arrangement.

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Cjdpsh A Sfdjfx Aicjhd Drive power: 3 kW Delivery pressure: 7 bar Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Altendorf F 45 EcoDrive with CE configuration - Year of manufacture: 9/2016 - Electrically adjustable height and swivel function 0 – 46° for the main saw blade with automatic correction of the cutting height when Cjdpo Ahgzxofx Aicehd the saw unit is swiveled. - 3-axis scoring unit for one-sided swiveling - LED lighting in the hazard area of the scoring unit - 5.5 kW (7.5 hp) with VARIO - Double sliding table, table length 3,200 mm - On/off switch on the double sliding table - Table extension 840 mm - Angle/miter stop with DIGIT L, cutting lengths up to 3,200 mm - CNC parallel stop, cutting width 1,300 mm - Toolbox (minimum length of double sliding table: 3,000 mm) - Front support roller, width 300 mm - Operating manual, operating tools, charger with batteries Machine is in very good condition, cleaned, and inspected.

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 5 h, machine/vehicle number: 6151570000, From our demonstration tool inventory, tested and fully functional: Chicago Pneumatic Cordless electric High-Torque Wrench CP8613 Demonstration tool with charger + 2 batteries (36 V 2.5 Ah) Accuracy (6 sigma): +/- 4% No-load speed: 10 rpm Min/Max torque range: 220 to 960 ft.lbs Working torque: 290 to 770 ft.lbs Drive: 3/4" square drive Cedpov Tbz Defx Aicshd Length: 12.52 in. Weight with battery & reaction arm: 11.7 lbs Other tools for industrial manufacturing and maintenance on request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 10 h, machine/vehicle number: 6151570380, From our demonstration tool inventory, tested and fully functional: Chicago Pneumatic Cordless electric High-Torque Wrench CP8603 Chsdpfsv Tbh Rjx Aicod Demonstration tool with charger + 2 batteries (36 V 2.5 Ah) No-load speed: 20 rpm Min/Max torque range: 50 to 240 ft.lbs Working torque: 65 to 190 ft.lbs Drive: 3/4" square drive Length: 11.06 in. Weight with battery & reaction arm: 9.0 lbs

Condition: excellent (used), Year of construction: 2022, Ref: 11171 . 2022 IML S74/13 Pneumatic Corner Cutting Machine Single-head pneumatic corner cutter for paper and board finishing, suitable for bookbinding and cover-making applications. Specification: Operation: Pneumatic Cutting thickness: 0–35 mm Cutting stroke: 50 mm Cutting angle: Dependent on fitted tooling Overall dimensions: 700 × 550 × 1,250 mm (L × D × H) Weight: Approximately 100 kg Cjdpfx Ais Ah D Snscehd

Condition: like new (used), machine/vehicle number: INDUSTRY 9, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 300 mm, cutting width (max.): 630 mm, saw blade diameter: 120 mm, total length: 1,240 mm, total width: 1,170 mm, total height: 1,280 mm, overall weight: 850 kg, Equipment: CE marking, Przemysłowa grubościówka ROJEK RFT 630 z serii INDUSTRY 9, przeznaczona do strugania drewna litego na zadaną grubość. Sprawdzi się w zakładach stolarskich przy obróbce desek, kantówek oraz elementów meblowych. Maszyna wyposażona w wał spiralny z wymiennymi, wieloostrzowymi płytkami skrawającymi. Rozwiązanie umożliwia obracanie poszczególnych płytek po zużyciu krawędzi oraz wymianę pojedynczego ostrza w przypadku uszkodzenia. Panel elektroniczny ELGO z wyświetlaczem i klawiaturą numeryczną ułatwia ustawianie wysokości roboczej. DANE I WYPOSAŻENIE: – producent: ROJEK, – model: RFT 630, – seria: INDUSTRY 9, Chodpfxs Aggbme Aicod – typ maszyny: strugarka grubościowa do drewna, – wał spiralny na wymienne płytki skrawające, – płytki z czterema oznaczonymi krawędziami, – elektryczna regulacja wysokości stołu, – panel sterowania ELGO P4011, – dodatkowa mechaniczna skala wysokości, – masywny stół roboczy z rolkami, – czterokolumnowe podparcie stołu, – osłony harmonijkowe kolumn, – mechaniczny posuw materiału, – segmentowy, metalowy wałek podający, – zabezpieczenie przeciwodrzutowe, – podnoszona górna pokrywa z wygłuszeniem, – wyłącznik awaryjny. ZASTOSOWANIE: – struganie desek i kantówek, – nadawanie elementom jednakowej grubości, – przygotowanie materiału do klejenia i dalszej obróbki, – produkcja elementów meblowych i stolarki drewnianej.

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 15-11-12-098, functionality: fully functional, power: 5.5 kW (7.48 HP), saw blade diameter: 500 mm, Excellent condition Machine available from January 2027 - Equipment package "B" - Saw blade, D = 500 mm - Motor power 5.5 kW (7.5 hp) Vario - 2-axis scoring unit - Double roller carriage, L = 3200 mm - On/off switch on the double roller carriage Chjdpfj Af Ub Uex Aicjd - Miter stop on the cross table up to 3200 mm with Digit-L - CNC parallel stop, 1300 mm - Control panel at eye level - Template holder - Table extension, 840 mm

Condition: ready for operation (used), Year of construction: 2008, operating hours: 17,000 h, functionality: fully functional, ## 2008 Star SR-20RIII – 20 mm CNC Sliding Head Lathe Seven controlled axes | Twin spindles | Driven tooling | FMB magazine bar feeder | 140-bar coolant Available from Swiss CNC, this 2008 Star SR-20RIII CNC sliding head lathe combines 20 mm machining capacity, twin spindles and driven tooling for the production of precision components from bar. Equipped with FANUC Series 300iS-Model A CNC control, it offers versatile turning, milling, drilling, tapping and back-working capability. The sliding head and guide bush arrangement supports the material close to the cutting point, making the machine particularly suited to small-diameter and slender components. C-axis control on both spindles allows accurately positioned machining features, while the opposed sub-spindle enables rear-face finishing and secondary operations within the same machine cycle. Independent front- and back-working capability allows operations to overlap where the component and programme permit, helping reduce cycle times and the need for additional handling between machines. ### Technical specification | Specification | Details | |---|---| | Manufacturer / model | Star SR-20RIII | | Year of manufacture | 2008 | | Maximum machining diameter | 20 mm | | Maximum headstock stroke | 205 mm | | Controlled axes | Seven: X, Y, Z, XB and ZB, plus C-axis control on both spindles | | Main spindle speed | Up to 10,000 rpm | | Sub-spindle speed | Up to 8,000 rpm | | CNC control | FANUC Series 300iS-Model A | | Rapid traverse | Up to 35 m/min | | Approximate machine weight | 2,200 kg, excluding bar feeder and ancillary equipment | ### Standard tooling layout - Six turning-tool positions for external turning, profiling, grooving and parting. - Five radial driven-tool positions for cross-drilling, milling and tapping applications. - Four front-working sleeve positions for end-working operations. - Four-position back-working station for machining components held in the sub-spindle. ### Included equipment - FMB Turbo 3-36 automatic magazine bar feeder for 3.2 m bar stock. - 140-bar high-pressure coolant system — approximately 2,000 psi. - LNS MH500 swarf conveyor, compatible with long-parts ejection. - JBS guide bush system. - TriMist Extraction - Noble fire suppression system. The combination of magazine bar feeding, high-pressure coolant and swarf handling provides a useful equipment package for repeat batch production and components requiring several machining operations. ### Machine hours Approximately 56,000 power-on hours. Cutting hours - 17,000 Csdjz Uxmbepfx Aicehd Available in the UK. Price on application, plus VAT. Contact Swiss CNC for pricing, machine videos, inspection arrangements and delivery or installation requirements. *Tooling layout describes the standard model configuration; the supplied toolholder package is subject to confirmation.*

Condition: used, Technical specifications: Codpfxe Ahyq Ue Aicehd Saw blade diameter: 300/350/400 mm Scoring saw diameter: 120 mm Manual saw blade height adjustment Tilting saw blade, adjustable from 0° to 45° Manual saw blade tilt angle adjustment 3 speeds: 3000/4000/5000 rpm Table length: 1700 mm Table locking mechanism Safety switch Power supply: 380 V Motor power: 3 kW Overall dimensions: Length: 2100 mm Width: 2100 mm Height: 1000 mm

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, ## 2021 Star SB-20R Type G – 20 mm CNC Sliding Head Lathe 7 axis | Twin spindles | Driven tooling | Guide-bush / non-guide-bush operation | FMB magazine bar feeder Available from Swiss CNC, this 2021 Star SB-20R Type G CNC sliding head lathe combines 20 mm bar capacity, twin-spindle machining and a versatile tooling platform for precision component production. Equipped with FANUC CNC control, it offers turning, milling, drilling, tapping and back-working capability within a compact machine layout. The 10,000 rpm main spindle and 9,000 rpm sub-spindle both feature C-axis control, supporting accurately positioned machining operations on the front and rear of the component. The fully independent sub-spindle allows front- and back-working operations to overlap where the component and programme permit, helping reduce cycle times and minimise additional handling. ### Guide-bush and non-guide-bush flexibility A key feature of the SB-20R Type G is its ability to switch between guide-bush and non-guide-bush operation. Guide-bush mode supports the material close to the cutting point, making it particularly suited to slender components and longer turned features. For shorter components, non-guide-bush operation can reduce bar remnant length and improve material utilisation. This flexibility allows manufacturers to adapt the machine to different component geometries and production requirements. ### Technical specification | Specification | Details | |---|---| | Manufacturer / model | Star SB-20R Type G | | Year of manufacture | 2021 | | Maximum machining diameter | 20 mm | Chodpfx Aijz U Acmsced | Controlled axes | Seven: X1, Y1, Z1, C1, X2, Z2 and C2 | | Maximum headstock stroke — guide-bush mode | 205 mm | | Headstock stroke — non-guide-bush mode | Up to 2.5 × bar diameter, maximum 50 mm | | Main spindle speed | Up to 10,000 rpm | | Sub-spindle speed | Up to 9,000 rpm | | Sub-spindle chucking capacity | 20 mm | | Spindle positioning | C-axis control on both spindles | | CNC control | FANUC CNC | | Rapid traverse | Up to 35 m/min | ### Tooling capability - Gang-type turning-tool arrangement, with six 12 mm or seven 10 mm square turning-tool positions, depending on the fitted tool block. - Four front-working sleeve positions for end-working operations. - Cross-drilling and milling capability, with modular cartridge tooling configurations available for different machining requirements. - Four-position back-working station, supporting static or driven tooling according to configuration. - Independent sub-spindle movement for component transfer and rear machining. ### Included equipment - FMB Turbo 2-20 automatic magazine bar feeder for 3.2 m bar stock. - Filtermist FX mist extraction system. - LNS MH500 Turbo swarf conveyor. - FireTrace fire suppression system. - Selection of tooling and workholding. The supplied bar feeder, extraction and swarf-handling equipment provide a practical package for manufacturers looking to add automated 20 mm bar-machining capacity. ### Machine hours and availability Power-on and cutting hours to be confirmed. 2021 machines available in the UK, offered individually. Price on application, plus VAT. Delivery, installation and training available. Contact Swiss CNC for pricing, machine videos, inspection arrangements and further information.

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 5 h, machine/vehicle number: 6151570000, From our demonstration tool inventory, tested and fully functional: Chicago Pneumatic Cordless electric High-Torque Wrench CP8613 Demonstration tool with charger + 2 batteries (36 V 2.5 Ah) Accuracy (6 sigma): +/- 4% No-load speed: 10 rpm Min/Max torque range: 220 to 960 ft.lbs Working torque: 290 to 770 ft.lbs Drive: 3/4" square drive Csdpfsv Tbpzex Aicjhd Length: 12.52 in. Weight with battery & reaction arm: 11.7 lbs Other tools for industrial manufacturing and maintenance on request.