Used Pistons for sale (1,886)

Condition: new, Year of construction: 2025, Schneider compressor UNM 510-10-90 D A714000 Mobile piston compressor with horizontal tank Standard with all safety fittings and electrical connection cable with plug and Condor pressure switch Air receiver equipped with safety valve, receiver pressure gauge and condensate drain valve. Welded rear handle improves loading and transportability Fully automatic operation due to pressure switch with start-up relief, motor protection and on/off switch Iijdpfx Acobyhvre Eoi With upscale equipment for universal use With V-belt drive, 2 cylinders in series arrangement for particularly smooth running and 400 V three-phase motor with external motor protection Low compressor speed - thus protecting the compressor components, lowering the noise level and reducing vibrations Large fan flywheel for optimal cooling Including filter pressure reducer for regulated compressed air, cleaned from condensate, dirt and oil With 2 m rubber-coated supply line and air outlet via quick coupling Supply line with phase inverter 10 years warranty on tank against rusting through Technical specifications Pressure 10 bar Suction capacity 510 l/min Filling capacity 390 l/min Speed 1240 min-1 Reservoir volume 90 l Weight 80 kg Noise level 97 dB(A) Dimensions (WxDxH) 1070x495x895 mm Drive power 3,0 kW Voltage 400 V Location: ex stock Bitburg subject to prior sale

Condition: ready for operation (used), An Atlas Copco piston compressor is available. Motor power: 4kW, max. operating pressure: 11bar, intake capacity: approx. 633l/min, delivery rate at 7bar: approx. 412l/min, speed: 1000rpm, tank capacity: 270l. Machine dimensions: approx. 1500mm/500mm/1200mm, weight: approx. 125kg. Documentation available. On-site inspection possible. Isdpfxsxuvpno Ac Eeii

Condition: used, Year of construction: 2017, Overview The ALWID-SUPERIOR-16D/4SK filling machine was built in 2017 by the German manufacturer ALWID. The machine was used by a Company producing sauces in Germany. After bankruptcy, BEVMAQ took over the machine and stored it. The filler is a piston filler that can fill volumes of 0.1-1.0 l into containers made of plastic or glass. The volume to be filled can be easily adjusted. The cap is pressed on. An extension to a screw capper is possible. In addition to sauces, the machine can also be used for dressing, spirits or mayonnaise. The below-surface filling can also be used to fill products that tend to foam. Technical Details Capacity: 6,000 bottles per hour with 250ml bottle volume A test showed that mayonnaise can still be filled to 500ml at 6,000 bottles per hour Working Direction: Left - Right Number of filling stations: 16 Number of closing elements: 4 Siemens control Below surface filling Lowering and raising the filling pipe during the filling process Scope of delivery: Filler Capper Cap sorting unit Cap alimentation Iodpfx Aewwq Sfec Eeii

Condition: used, mileage: 117,555 km, power: 350 kW (475.87 HP), first registration: 05/2009, overall weight: 32,000 kg, fuel type: diesel, color: silver, axle configuration: > 3 axles, emission class: euro5, Year of construction: 2008, Equipment: ABS, air conditioning, crane, parking heater, Special equipment: Iedpfowz Du Iex Ac Eeii Trailer brake 2-line, trailer coupling: G 150, trailer socket 24V / 15-pin, audio system: CD radio (Bluetooth), 220 Ah battery, aluminum air reservoir, air horn, cab: movable cab entry, cab: comfort suspension (1.8 Hz), 100 A alternator, noise reduction measure 80 dB(A), graphic info display with eco meter, automatic climate control, light and rain sensor, 2-cylinder air compressor, high-performance belt-driven fan, illuminated Mercedes star, MB 2C PTO, programmable special module, rotating beacon left/right, circuit breaker, cab seats: comfort driver's suspension seat with horizontal suspension, sun visor, side window sun blinds, driver and passenger door, 24V cab socket, impact protection grille, steel front bumper, automatic daytime running lights, cross member for trailer coupling, reverse warning buzzer, additional heat insulation, auxiliary air heater, transmission oil cooler Additional features: 2nd steered front axle, emission standard EURO 5, axle configuration: 8x8/4, front axle load 9.0 t, trailer coupling: towing hitch, vertical exhaust silencer behind cab, electrically adjustable and heated exterior mirrors, steel roof hatch, rear axle differential lock, front axle differential lock, cab: M (medium length), suspension: leaf/leaf, electric windows, 16-speed gearbox, rear axle H 7, 13 t, ring gear 300, hydraulic pump (Meiller pump – 6 pistons), body/chassis: chassis for tipper (additional body), body/chassis: tipper, fuel tank: 300 liters, model update from 06/2008, engine 12.0 L – 350 kW V6 diesel (OM 501 LA), engine brake with constant throttle, wheelbase 4800 mm, rear window, voltage converter 24V/12V 8A, steel rims 9.00x22.5, Telligent shift system, Telligent brake system with ABS, drum brakes front and rear axle, transfer case with differential lock, CB radio pre-installation, preparation for phone/fax, immobilizer, heat-insulating glazing, central locking with keys, gross vehicle weight 41.00 t Errors and prior sale reserved Viewing only by appointment WhatsApp inquiries will not be answered

Condition: new, power: 235 kW (319.51 HP), overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: automatic, loading space width: 2,420 mm, loading space length: 4,000 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Internal reference number for customer inquiries: 5-006 / Immediately available ---- AVAILABLE NOW AT SPECIAL PROMOTIONAL PRICE MAN TGM 18.320 4x4 BB WITH MEILLER-TRIGENIUS TIPPER BODY WITH FASSI OR PALFINGER CRANE A vehicle suitable for landscaping, road construction, site operations, or as a municipal service vehicle! (ALSO AVAILABLE IN ORANGE) FASSI F135AC.0.24 dynamic (4-stage extension) * Maximum outreach: 10.85 m * Slewing range: 390° * Outrigger spread: 4.37 m, hydraulic extension * All hydraulic cylinders double-acting * Piston rods hard-chromed * Electronic overload shut-off device with FX500 emergency STOP and visual alarm at 90% and 100% * FASSI Stability Control FSC-M/1 incl. LMB II pressure limiting and load-holding valves * Control block with 4 control valves, operable from both sides * Controls for 2 additional functions with 2 hose guides, e.g. for grab operation * Fassi RCS maxi radio remote control – 6 functions with 3 joysticks (2-2-2) * 1 LED work light mounted on the articulated arm * Working lights can be operated via RCH / display (1 b/w function) * Working lights Alternatively, the following loading crane is available: * Palfinger PK 14.501 K SLD 5 * PALFINGER SOLID TRUCK-MOUNTED CRANE with KTL coating * Hydraulic four-fold extension – 11.7 m * Lifting moment: 142.4 kNm (14.5 mt) * Slewing range: 420° * Electronic overload protection PALTRONIC incl. emergency STOP and load indicator * Operating hours counter with service interval indicator * Scanreco remote control * LOAD and overload display PALTRONIC at the radio control panel * 5 selectable speeds Vehicle: * MAN TGM 18.320 4X4 BB loader crane tipper * Tipper body 4200x2420 mm, make MEILLER, type TRIGENIUS (new model series) * Bulkhead height: 800 mm * Sideboard height: 600 mm * Fully retractable lashing rings in the platform floor * Cab type CC: the compact (narrow, short, standard height) * Wheelbase: 3,875 mm * Spring suspension front/rear (can also be leaf/air suspension at the front) * Drive: 4x2 * Tires: front axle 2x 295/80R22.5, rear axle 4x 295/80R22.5 * GVW: 18,000 kg * MAN TipMatic automatic transmission * MAN D0836 LFLAP diesel engine, 235 kW (320 hp), 1,250 Nm torque, Euro 6e * Transmission feature: EfficientRoll * Cruise control Iodpfxsxnn Ivs Ac Eeii * Rear axle differential lock * MEILLER axial pump 270/45 * Tipper operation from driver’s cab * MAN EasyControl control panel, 4 functions, can be operated externally when the door is open * Ringfeder trailer coupling type 4040/G150B * Dual-line brake connection at frame end * Sun visor in front of windshield * Central locking with remote * MAN Media System Navigation Advanced 7 inch * Online traffic info for navigation * Smartphone integration * Heated and electrically adjustable rear and wide-angle mirrors * Air-suspended driver comfort seat with lumbar support, shoulder adjustment and heating * Adjustable driver’s seat belt height * 2 work lights on cab roof * 2 halogen rotating beacons on cab roof * And much more Financing, leasing, or hire purchase available. For further questions, our sales team is happy to assist you. This is a non-binding offer. Subject to prior sale, errors and modifications.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Mecatherm Baguette Line Brand: MECATHERM – Model: TRADIVIDER RT II * Dough dividing from 200 g to 1000 g * Output up to 1700 kg/h for highly hydrated doughs and long proofing times Dough divider hopper – Capacity: 250 kg for pre-portioning of 15 kg Divider – Brand: MECATHERM – TRADIVIDER Type 32/16, including: * 1 sorting hopper – Capacity: 300 liters * 1 multi-piston dividing chamber on a swing frame * 1 swing frame drive system Iisdexn Iruspfx Ac Eji * 1 pin-type dough gripper * 1 dough piece receiving conveyor * 1 discharge conveyor * Dividing range: 200/400 g with 32 pistons – Capacity: 1360 kg dough per hour * Dividing range: 350/1000 g with 16 pistons – Capacity: 1700 kg dough per hour Electrical equipment Dusting machine * Complete flour dusting of the dough with reclamation of excess flour Intermediate Proofing and Resting Block Brand: MECATHERM – Model: RTH, including: * 1 inclined conveyor – Width: 400 mm with curve and discharge belt on the first level * 1 automatic station for pre-proofing, moulding, scoring, elongating, and depositing on honeycomb trays * At the end of the conveyor: 1 6-tray stacker with grissini to enhance operator efficiency * Mesh return conveyor under the RT block Output for long loaves and baguettes: up to 2,500 loaves per hour; for small breads: 5,000 to 12,500 pieces per hour Portioning area for long dough pieces: 2, 3, 4, 5, or 6 portions Maximum length of long dough pieces: 800 mm * RT block length: 8.17 m * RT block width: 1.41 m * RT block height: 3.05 m Line in good condition when production ceased in May 2021 – currently disassembled and stored in containers Commissioned at the beginning of 2014 Delivery and commissioning available upon request

Condition: new, Year of construction: 2025, Technical data: Suction capacity 510 l/min. Filling capacity 400 l/min. Maximum pressure 10 bar Tank capacity 90 l Cylinder/stages 2/1 Speed 1.300 min/1 Motor power 3 kW/ 400 V Description: The universal with V-belt drive and qualitative equipment especially suitable for craftsmen for use where compressed air quality, durability and efficiency are essential long life thanks to high performance low speed units safe transport and excellent stability thanks to large wheels with parking brake Optimum cooling thanks to large fan impeller aftercooler with cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air better efficiency due to optimised aggregates Standard with: Condor pressure switch Pressure gauge Iisdpfehk Dfkjx Ac Eei Pressure reducer with water separator and Rectus quick coupling Motor with overload protection Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Cesurbend Mandrel Tube Bending Machine / Pipe Bending Machine PBNC-51 Technical Specifications Max. Tube Diameter: 51 mm Max. Tube Wall Thickness (mm): 3 Max. Bending Angle (°): 190 Tube Bending Rate (rpm): 7-10 Max. Hydraulic Pressure (bar): 200 Max. Bending Radius (mm): 250 Tube Length (mm): 3000 Bending Motor Power (kW): 5.5 Hydraulic Motor Power (kW): 3 Machine Width (mm): 1400 Machine Length (mm): 4215 Machine Height (mm): 1450 Iedpfx Acext Rc To Eeii Machine Weight (kg): 1600 Features • In this process, the jaw clamps the tube after it is inserted into the machine. The tube is bent over the die to half its diameter. When using a mandrel and wiper, better results are achieved for bends requiring higher quality, with thinner wall thickness and smaller radii. • This is a three-piston machine with a hydraulic spool located behind the hydraulic boom.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, input frequency: 50 Hz, input voltage: 400 V, DGUV certified until: 11/2026, NEW NEW Dough Divider NEW NEW Dough divider for stress-free and oil-free dough dividing Model: Slim 700 Cylinder and piston made of high-quality stainless steel Teflon-coated stainless steel hopper with safety cover Performance up to 1,100 pieces per hour Dividing range from 80 to 700 grams (depending on dough type) Electronically adjustable speed and piece counter Divider with manual weight adjustment Discharge belt length: 50 cm Stainless steel construction Machine mobile with brake Only available from us: DGUV V3 tested Connection: 400V, 16A CEE plug Brand new machine & SAB tested with warranty + spare parts service Optional: Leasing & rental service - Discharge conveyor up to max height of 1650 mm - Automatic flour duster - Rounding module - 90 kg hopper - Higher base frame - Maintenance contract - E-box - Service package Iedpfork D U Ejx Ac Eeii Delivery service Other top dough dividers available!

Condition: used, mileage: 117,555 km, power: 350 kW (475.87 HP), first registration: 05/2009, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: silver, emission class: euro5, Year of construction: 2009, Equipment: ABS, air conditioning, parking heater, Special equipment: Trailer brake, dual-circuit; trailer coupling: G 150; trailer socket: 24V / 15-pin; audio system: CD radio (Bluetooth); battery: 220 Ah; aluminum air reservoir; air horn; cab: movable cab entry; cab: comfort suspension (1.8 Hz); alternator: 100 A; noise reduction to 80 dB(A); graphic info display with eco-meter; automatic climate control; light and rain sensor; 2-cylinder air compressor; high-performance belt-driven fan; illuminated Mercedes star; MB 2C PTO; programmable special module; rotating beacon left/right; circuit breaker; seats in cab: driver's comfort suspension seat with horizontal damping; sun visor; sunblind for side windows, driver and passenger doors; 24V socket in cab; stone guard grille; front bumper in steel design; automatic daytime running lights; crossmember for trailer coupling; reverse alarm; additional thermal insulation; auxiliary heater (air); transmission oil cooler Additional equipment: Iiodpfx Aswkdd Uoc Eji 2nd steerable front axle; emission standard EURO 5; axle configuration: 8x8/4; front axle load 9.0 t; trailer coupling: towing hitch; upright muffler behind cab; exterior mirrors electrically adjustable and heated; roof hatch (steel); rear axle differential lock; front axle differential lock; cab: M (medium length); suspension: leaf/leaf; electric window lifters; 16-speed gearbox; rear axle H 7, 13 t, crown wheel 300; hydraulic pump (Meiller pump - 6 pistons); body/chassis: chassis for tipper (additional AV); body/chassis: tipper; fuel tank: 300 liters; model revision from 06/2008; engine: 12.0 liter - 350 kW V6 diesel (OM 501 LA); engine brake with constant throttle; wheelbase: 4800 mm; rear window; voltage converter 24V/12V 8A; steel rims 9.00x22.5; Telligent gear shift; Telligent brake system with ABS; drum brakes front and rear axle; transfer case with differential lock; CB radio preparation; phone/fax preparation; immobilizer; heat-insulating glazing; central locking incl. key; permissible total weight 41.00 t Errors and prior sale excepted Viewing by appointment only WhatsApp inquiries will not be answered

Condition: new, power: 350 kW (475.87 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, loading space width: 2,420 mm, loading space length: 4,800 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, tail-lift, Internal reference number for customer inquiries: 3-374----Mercedes Benz Arocs 3348 AK 6x6 tipper with crane, equipped with a Fassi F195A.2.24 crane Mercedes Benz diesel engine model OM471, inline 6, 12.8 L, 350 KW (476 HP), 2300 NM, 3rd generation OM471 engine * Automatic transmission, gearbox G 330-12/11.63-0.77, MERCEDES POWERSHIFT 3 * OFFROAD driving program * 6x6 drive * Suspension: leaf/air * Differential locks on powered rear axles * Wheelbase 3600 mm * Fuel tank capacity 290L, AdBlue tank 60L * DRUM BRAKES on front and rear axles * ELECTRONIC BRAKE SYSTEM WITH ABS AND ASR * ABS, SWITCHABLE * PARKING BRAKE, ADDITIONAL ON FRONT AXLE * M-CAB CLASSICSPACE, 2.30 m width, 320 mm tunnel * FLOOR DESIGN, 320 mm tunnel * CAB WIDTH 2.30 m * CAB, 600 mm mounting height * CAB REAR WALL WITH WINDOW * CAB TILTING DEVICE, MECHANICAL-HYDRAULIC * ROOF HATCH/ROOF VENTILATION FLAP * DRIVER AIR SUSPENSION COMFORT SEAT * DIGITAL TACHOGRAPH, 2nd GENERATION, ADR * MULTIMEDIA COCKPIT, INTERACTIVE * NAVIGATION SYSTEM * 24 V/15 A SOCKET IN FRONT PASSENGER FOOTWELL * HOT WATER AUXILIARY HEATER (CAB) * AIR CONDITIONING * AIR CONNECTION IN CAB * 2-WAY SPEAKER SYSTEM 3-way tipper body with Fassi F195A.2.24 crane mounted directly behind the cab (Crane with top features: radio remote control, hydraulic outriggers with radio operation, work lights, etc.) * Cargo area length: 4800 mm * Cargo area width: 2420 mm Iijdpfx Acjxnnvms Esi * Cargo area height: 800 mm Subframe: Sturdy welded steel construction with two longitudinal beams and crossmembers to support the 5 mm thick tipper profile and the 4 mm base plate made of Hardox or Naxtra. Fixed 1,000 mm high steel front wall with 2 round lashing eyes inside, on the outside at mid-height. Fixed corner stakes with lower locks. Tailgate and side walls (one-piece, full length) made from aluminum hollow profiles; side walls foldable and swinging with board lifting aids. Tailgate also foldable and swinging, with central locking integrated into the tipper section. Floor plate made from 4 mm Hardox or Naxtra, neatly welded with the tipper profile and longitudinal/crossmembers. Press traverse and tipping outrigger sunken and reinforced in the longitudinal beams. Lashing eyes (4 per side) recessed in the outer tipper floor over the length. Steel construction in St 52-3. All steel parts sandblasted, superstructure parts finished in RAL 9016 (single color) painted or powder coated. Subframe: Subframe designed to hold front and rear tipper outriggers, with press traverse and crossbeams. In crane mount area, closed as box section with side crane mounting plates. Existing plastic mudguards on vehicle will be utilized and, if needed, modified. Hydraulics: Installation of pneumatic control valve (for tipper/crane/trailer) in cab and complete hydraulic system including all piping/connections for the three-way tipping body, trailer tipper hydraulics, and loading crane. Delivery and installation of suitable axial-piston constant pump. Special Equipment: - Fixed rear corner posts - Lift assists for side walls - Eight lashing eyes left & right recessed in the floor (4 per side) - Hydraulic system for crane/tipper/trailer switchable via valve in the cab - Positioning of underrun protection, rear lights, and supply lines to the left - Central locking for

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 53 kg, Caffini Diaphragm Pump Libellula 1-3 - NEW! Equivalent to Wacker Neuson PDI 3A and AMT 337G-96B. Delivery head: 7 m, Flow rate: 333 l/min, Discharge outlet: 80 mm, Weight: 53.5 kg, Honda GX 160 petrol engine with 4.0 kW, including chassis, connection kit, suction strainer, handles solids up to 6 cm. Machine location: Warehouse D-46514 Schermbeck. Applications: ✔ Construction & civil engineering (sludge, gravel, sediment) ✔ Sewer & pipe cleaning ✔ Dewatering of construction pits & shafts ✔ Emergency pumps for flood control ✔ Agriculture, industry, rental Iedpoxtuv Defx Ac Ejii _____ Buy Caffini Libellula 1-3 | Diaphragm pump for solids | Dirty water pump 333 l/min | Pump with Honda GX 160 engine | Wacker Neuson PDI 3A alternative | Equivalent to PDI 3A | Honda 3-inch pump | Construction site solids pump | Petrol flood pump | Piston pump with chassis | Construction site pump with suction strainer

Condition: new, Year of construction: 2025, TECHNICAL DATA Iisdpfxji Amnpe Ac Eei Pressing force 30t max. load prism jaw 7.5t piston stroke 160mm piston travel 550mm Dimensions and weights length (product) approx. 1240mm width/depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear width 790mm Installation height max. 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot lever Winch for lifting and lowering the table Location: Ex works - available at short notice -

Condition: excellent (used), Year of construction: 1999, Piston compressor 11 bar, 650 l/min intake capacity Iodpsiz Trtofx Ac Eoii 4.1 kW 380 V Year of manufacture: 1999

Condition: used, Year of construction: 2017, functionality: fully functional, overall weight: 500 kg, input voltage: 400 V, total length: 2,500 mm, total width: 1,300 mm, total height: 1,600 mm, stack height: 1,200 mm, Experience our user-friendly touchscreen interface, enabling fast and simple film reel loading, secure high-speed operation, automatic balancing of heat, temperature, and pressure, as well as intuitive device adjustments. DIGIFAV-B2 ensures a rapid learning curve, allowing users to achieve top performance in minimal time. DIGIFAV-B2 features a robust steel construction with premium hardware, electronic components, and precision calendered finishing. Designed for fast job changeovers, it prevents damage to digital prints and is suitable for medium run production, continuous single-shift operation, and all kinds of digital prints and films. Maximum Speed: 25 m/min* Maximum SRA3 Landscape Throughput: 3,700 sheets/h* Maximum B2 Vertical Throughput: 1,800 sheets/h* Minimum – Maximum Sheet Size: 220×220 mm – 530×750 mm Minimum – Maximum Paper Weight: 130–350 gsm* Footprint: 217 cm × 112 cm Safety: CE-compliant safety interlocks, protective shields, emergency stops, and security photocell sensors Power Supply: 400 V, 3-phase, 50 Hz Installed Electrical Power: 8 kW Feeder System: Pneumatic feeder with transport mechanism Feeder Pile Height: 600 mm Lateral Guides: Adjustable Iiodexwnxgopfx Ac Eei Front Gates for Automatic Sheet Registration and Overlap: Yes (Overlap tolerance ±1 mm) Compatible Films: BOPP, Embossed BOPP, Nylon Burst, PET Burst Film Loading System: Expanding shaft Film Cutting: Precision trim cutting system Heated Roller: Chrome-sealed, oil-heated roller NIP Roller System: Self-balancing pneumatic pistons and protective pressure roller programming Separator System: Bursting type Decurl Bar: Included

Condition: used, Year of construction: 2015, Fabricant : Embatherm Modèle : DTE 180 Année : 2015 Type : Remplisseuse pot / operculeuse aluminium Application : Produit liquide / semi-liquide (crème)   Distribution : convoyeur + couronne de transport Remplissage : bloc piston avec trémie Remplissage max : 250 ml Détection du pot pour valider remplissage Rotation du produit pendant remplissage : oui Capteur présence opercule Detection / Ejection pièces non conformes Chargeur opercule Pick and place opercule par ventouse + thermoscellage par conduction Automate Omron + HMI   Plusieurs formats de disponibles Réglage hauteur maintien pot / bec doseur / thermoscellage : manuel Longueur machine : 355 cm   Dossier technique complet Vidéo en fonctionnement disponible     Ijdpfx Acow Ihgge Esii    

Condition: used, mileage: 17,954 km, power: 316 kW (429.64 HP), first registration: 04/2023, overall weight: 26,000 kg, fuel type: diesel, color: blue, axle configuration: 3 axles, gearing type: automatic, loading space width: 2,380 mm, loading space length: 4,900 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, Internal reference number for enquiries: 5 IMMEDIATELY AVAILABLE!!! Mercedes-Benz Arocs 2643 6x4 Three-way Tipper Meiller Used vehicle First registration: 19/04/2023 Only 17,954 km driven 1 owner Equipment: - Engine OM470, R6, 10.7 l, 315 kW (428 hp), 2100 Nm - Engine version Euro VI, E - Air compressor, 2 cylinders - NA MB 131-2c, pump - Meiller pump, 7-piston, type 275 - M cab, ClassicSpace, 2.30 m, tunnel 320 mm - Wheelbase 3600 mm - Driveline, 44 t to 80 t - Gearbox G 330-12/11.63-0.77 - Mercedes PowerShift 3 - Single-plate clutch - Front axle straight, increased ground clearance - Rear axle, 300 mm crown wheel, planetary, 13.4 t - Electronic braking system with ABS and ASR - Disc brakes on front and rear axles - Front suspension 8.0 t, 3-leaf - Rear suspension, 2 x 10.0 t, heavy-duty - Compressed air connection in cab - Comfort driver's air-sprung seat - Air conditioning - 2 remote control keys - Tank 290 l, left, 650 x 565 x 950 mm, steel - AdBlue tank 60 l, left - Factory tipper, Meiller -> Meiller 3-way tipping platform - Standard three-side tipper, 4900 x 2380 x 800 mm - Access step on tipper body - Long protective roof for tipper - Side wall height 900 mm - Left side wall, swinging, foldable - Rear underrun protection, foldable - Bulkhead height 1100 mm - Dosing device at rear wall - Tipping control in cab Isdpfx Ajxnnu Asc Ejii For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes.

Condition: excellent (used), Year of construction: 2013, Traub TNL 18-7B CNC Automatic Lathe Base machine: 2441 x 1396 mm Weight: 3800 kg Spindle height above floor: 3800 mm Connected power: 24 kW Main spindle Max. bar capacity: 18 mm Max. speed: 12,000 rpm Cross-cut speed: 5,000 rpm Z stroke: 205 mm Rapid traverse: 40 m/min Z measuring system resolution: 0.001 mm Feed force: 3000 N Spindle head / short taper: Traub short taper mount Max. clamping force: 1400 daN Max. clamping pressure: 40 bar Min. clamping pressure: 7.5 bar Ijdpfxjwg Takj Ac Eoii Piston area: 40 cm2 Total cylinder travel: 5 mm Clamping tube thread: M25 X 1 Counter spindle Workpiece diameter: 21 mm Workpiece clamping depth: 180 mm Max. speed: 12,000 rpm Strokes: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. clamping pressure: 30 bar Min. clamping pressure: 10 bar Top tool turret with B-axis Number of stations: 8 Shank cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower tool turret Number of stations: 7 + counter spindle Shaft cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Tool drive for upper tool turret Number of driven stations: Max. 8 Drive power: 2 kW Max. speed: 12,000 rpm Torque: 3.9 Nm Tool drive for lower tool turret Number of driven stations: 7 + counter spindle Drive power: 3.4 kW Max. speed: 12,000 rpm Torque: 7.3 Nm Tool drive for the rear unit Number of stations: 7 Number of driven stations: max. 3 Pitch spacing: 46 mm Drive power: 2 kW Max. speed: 7,500 rpm Torque: 4.7 Nm Drive power: 2 kW Max. speed: 4,000 rpm Torque: 11.8 SCOPE OF OFFER INCLUDES (list is not exhaustive): Traub CNC lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire extinguishing system Chip conveyor Bar loader Operational documentation For the exact scope of offer, see the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided.

Condition: new, Year of construction: 2025, Hoku BK119-270-10-VKK upright piston compressor with refrigerant dryer, automatic condensate drain, oil-water separator, pre- and fine filters, mounted with rubber vibration dampers on a safety pallet. Universal piston compressors with belt drive and high-quality features. Pressure vessel manufactured according to German AD 2000 regulations. Intake capacity: 650 l/min Effective delivery rate: 520 l/min Maximum pressure: 10 bar Tank volume: 270 l Cylinders/stages: 2/2 Speed: 920 rpm Motor power: 4 kW/400 Volt Air throughput: 650 m³/h Motor power: 4 kW Iisdpor Ig Ahefx Ac Esi Machine dimensions: 1200 x 800 x 2000 mm Pressure vessel: 270 L Effective delivery volume: 520 L/min Intake volume: 650 L/min Maximum pressure: 10 bar Location: ex stock 54634 Bitburg - immediately available -

Condition: refurbished (used), Year of construction: 2001, Koenig Mini Rex 4000 Futura bun roll machine 2-pockets with formstation DR-RR 400. For the production of rounded, long-rolled, long-rolled and folded as well as flattened products new drum and pistons SKG54-AKG70 weight range 25-140 grams several weight ranges with other drums is possible through the use of combined stamp sizes, on request max. cap. 4000 pcs/h year of build 2001 compact design fully automated dividing and rounding of wheat doughs and rye- -wheat doughs with a maximum rye percentage of 40% excellent results with the production of round, long-rolled, long-rolled and folded as well as flattened goods tried-and-tested in thousands of in-store bakeries height-adjustable calibrating head, folding net belts, lower belt and upper belt for ergonomic working with the following functions: transporting, long rolling, pressing flat teflonised collecting drawer for manual product removal high level of operating comfort quick and easy cleaning on account of plug-in elements stainless steel design power supply: 1.5 kW Iodpjxtat Iofx Ac Eeii weight approx. 460kg

Condition: new, Year of construction: 2025, warranty duration: 36 months, New machine 3-year warranty including delivery* & instruction in your bakery * Ground-level installation and sufficient door widths required Advantages: + unbeatable price-performance ratio + modern, volumetric dough dividing machine (gentle on the dough, without vacuum!) + particularly suitable for soft wheat-rye mixed dough + extended weight range possible with double piece output (400 - 3300 g piece weight) + revolutionary dough dividing system requires minimal cleaning effort + no dough residue in the drum at the end of the production cycle + dividing the dough without unnecessary stress and compression of the dough + high precision of the dough weights at the same time + pressure lubrication with oil circulation and filtration, very low oil consumption + easier filling of the dough hopper due to low height + height-adjustable conveyor belt can be selected Iisdpfx Acovw R Ihs Eji + ejection onto a table or other machines (rounder, etc.) possible STANDARD equipment: + weighing chamber made of stainless steel + robust Construction: steel frame, stainless steel housing + Double piece function (only for model with 1 piston) + Touchscreen control with self-cleaning program >> Setting the hourly output / piece counter / piece weight >> Programming and naming of recipes >> Reading the production statistics + Electronic speed setting + Electronic weight setting + Electronic piece counter + Teflon-coated stainless steel funnel (conical or square depending on size), + 40 kg dough capacity with safety grid in accordance with CE >> Other funnel sizes available for a small additional charge (80 / 120 / 160 / 200 / 300 kg dough) + Separately driven and height-adjustable output belt + Adjustable flour sprinkler, prevents dough pieces from sticking to the output belt + Scraper on the dough output belt Technical data: Capacity: 900 - 2500 pieces per hour (depending on dough) Piece weight: 200 - 1650 grams (depending on dough) Piston: 1 dough part piston (diameter 150 mm), 1-row dough output Power: 2.45 kW Connection values: 400V - 3Ph- 50Hz Fuse: 16A-CEE plug Dimensions of machine in working position: 1120-1136 x 626 x 1501 mm (WxDxH) Dimensions of machine in resting position: 1052 x 626 x 1501 cm (WxDxH) Input height with 40 kg hopper: 1501 mm Net weight: 410 kg SPECIAL accessories, prices on request: - Stainless steel drag for pre-wrapping - Frequency converter for continuously adjustable speed of the dough output belt - Take-off roller on chamber output - Short rounding bar - Higher ground clearance 10/15/20 cm - Additional power connection for connection to work table / rounding beam etc. >> 400 V high current / 3 Ph >> 230 V light current / 1 Ph or 3 Ph

Year of construction: 2017, condition: excellent (used), Stationary piston compressor with 500 L tank Air outlet ¾" Dimensions and weights Length (product) approx. 2020mm Width/depth (product) approx. 570mm Height (product) approx. 1340mm Weight (net) approx. 245kg Electrical data Supply voltage 400V Ijdpfelczl Uex Ac Ejii Mains frequency 50Hz Output power 5,5kW input power 6,52kW Noise emission Sound pressure level Lp 83dB(A) Explanation Sound pressure level Sound pressure level at 1 m distance according to DIN 45635 T 13 Compressor Compressor system HOS Suction capacity approx. 950l/min Filling capacity approx. 750l/min Explanation Filling capacity at 6 bar working pressure Number of cylinders 2 Number of compression stages 2 Compressor speed 960min¯¹ Compressed air tank Maximum pressure 10bar Tank capacity 500l Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, warranty duration: 36 months, New machine 3-year warranty including delivery* & instruction in your bakery * Ground-level installation and sufficient door widths required Advantages: + unbeatable price-performance ratio + modern, volumetric dough dividing machine (gentle on the dough, without vacuum!) + particularly suitable for soft wheat-rye mixed dough + extended weight range possible with double piece output (180 - 2000 g piece weight) + revolutionary dough dividing system requires minimal cleaning effort + no dough residue in the drum at the end of the production cycle + dividing the dough without unnecessary stress and compression of the dough + high precision of the dough weights at the same time + pressure lubrication with oil circulation and filtration, very low oil consumption + easier filling of the dough hopper due to low height + height-adjustable conveyor belt can be selected + ejection onto a table or other machines (rounder, etc.) possible STANDARD equipment: + weighing chamber made of stainless steel + robust Construction: steel frame, stainless steel housing + Double piece function (only for model with 1 piston) + Touchscreen control with self-cleaning program >> Setting the hourly output / piece counter / piece weight >> Programming and naming of recipes >> Reading the production statistics + Electronic speed setting + Electronic weight setting + Electronic piece counter + Teflon-coated stainless steel funnel (conical or square depending on size), + 40 kg dough capacity with safety grid in accordance with CE >> Other funnel sizes available for a small additional charge (80 / 120 / 160 / 200 / 300 kg dough) + Separately driven and height-adjustable output belt + Adjustable flour sprinkler, prevents dough pieces from sticking to the output belt + Scraper on the dough output belt Technical data: Capacity: 900 - 2500 pieces per hour (depending on dough) Piece weight: 90 - 1000 grams (depending on dough) Piston: 1 dough part piston (diameter 120 mm), 1-row dough output Power: 2.45 kW Connection values: 400V - 3Ph- 50Hz Fuse: 16A-CEE plug Dimensions of machine in working position: 1120-1136 x 626 x 1501 mm (WxDxH) Dimensions of machine in resting position: 1052 x 626 x 1501 cm (WxDxH) Input height with 40 kg hopper: 1501 mm Iedpswyvvbsfx Ac Ejii Net weight: 410 kg SPECIAL accessories, prices on request: - Stainless steel drag for pre-wrapping - Frequency converter for continuously adjustable speed of the dough output belt - Take-off roller on chamber output - Short rounding bar - Higher ground clearance 10/15/20 cm - Additional power connection for connection to work table / rounding beam etc. >> 400 V high current / 3 Ph >> 230 V light current / 1 Ph or 3 Ph

Condition: new, Year of construction: 2025, warranty duration: 36 months, New machine 3-year warranty including delivery* & instruction in your bakery * Ground-level installation and sufficient door widths required Advantages: + unbeatable price-performance ratio + modern, volumetric dough dividing machine (gentle on dough, without vacuum!) + particularly suitable for soft wheat-rye mixed dough + extended weight range possible with double piece output (100 - 1400 g piece weight) + revolutionary dough dividing system requires minimal cleaning effort + no dough residue in the drum at the end of the production cycle + dividing the dough without unnecessary stress and compression of the dough + high precision of the dough weights at the same time + pressure lubrication with oil circulation and filtration, very low oil consumption + easier filling of the dough hopper due to low height + height-adjustable conveyor belt can be selected + ejection onto table or other machines (rounder, etc.) possible STANDARD equipment: + weighing chamber made of stainless steel + robust Construction: steel frame, stainless steel housing + Double piece function (only for model with 1 piston) + Touchscreen control with self-cleaning program >> Setting the hourly output / piece counter / piece weight >> Programming and naming of recipes >> Reading the production statistics + Electronic speed setting + Electronic weight setting + Electronic piece counter + Teflon-coated stainless steel funnel (conical or square depending on size), + 40 kg dough capacity with safety grid in accordance with CE >> Other funnel sizes available for a small additional charge (80 / 120 / 160 / 200 / 300 kg dough) + Separately driven and height-adjustable output belt + Adjustable flour sprinkler, prevents dough pieces from sticking to the output belt Isdpfx Acjwyu Uvs Eeii + Scraper on the dough output belt Technical data: Capacity: 900 - 2500 pieces per hour (depending on dough) Unit weight: 70 - 1400 grams (depending on dough) Piston: 1 dough part piston (diameter 70 mm), 1-row dough output Power: 2.45 kW Connection values: 400V - 3Ph- 50Hz Fuse: 16A-CEE plug Dimensions of machine in working position: 1120-1136 x 626 x 1501 mm (WxDxH) Dimensions of machine in resting position: 1052 x 626 x 1501 cm (WxDxH) Input height with 40 kg hopper: 1501 mm Net weight: 410 kg SPECIAL accessories, prices on request: - Stainless steel drag for pre-wrapping - Frequency converter for continuously adjustable speed of the dough output belt - Take-off roller on chamber output - Short rounding bar - Higher ground clearance 10/15/20 cm - Additional power connection for connection to work table / rounding beam etc. >> 400 V high current / 3 Ph >> 230 V light current / 1 Ph or 3 Ph

Condition: new, Year of construction: 2025, warranty duration: 36 months, New machine 3-year warranty including delivery* & instruction in your bakery * Ground-level installation and sufficient door widths required Advantages: + unbeatable price-performance ratio + modern, volumetric dough dividing machine (gentle on the dough, without vacuum!) + particularly suitable for soft wheat-rye mixed dough + extended weight range possible with double piece output (60 - 740 g piece weight) + revolutionary dough dividing system requires minimal cleaning effort + no dough residue in the drum at the end of the production cycle + dividing the dough without unnecessary stress and compression of the dough + high precision of the dough weights at the same time + pressure lubrication with oil circulation and filtration, very low oil consumption + easier filling of the dough hopper due to low height + height-adjustable conveyor belt can be selected + ejection onto a table or other machines (rounder, etc.) possible STANDARD equipment: + weighing chamber made of stainless steel + robust Construction: steel frame, stainless steel housing + Double piece function (only for model with 1 piston) Iiedpowyu Upjfx Ac Eji + Touchscreen control with self-cleaning program >> Setting the hourly output / piece counter / piece weight >> Programming and naming of recipes >> Reading the production statistics + Electronic speed setting + Electronic weight setting + Electronic piece counter + Teflon-coated stainless steel funnel (conical or square depending on size), + 40 kg dough capacity with safety grid in accordance with CE >> Other funnel sizes available for a small additional charge (80 / 120 / 160 / 200 / 300 kg dough) + Separately driven and height-adjustable output belt + Adjustable flour sprinkler, prevents dough pieces from sticking to the output belt + Scraper on the dough output belt Technical data: Capacity: 900 - 2500 pieces per hour (depending on dough) Unit weight: 30 - 370 grams (depending on dough) Piston: 1 dough part piston (diameter 80 mm), 1-row dough output Power: 2.45 kW Connection values: 400V - 3Ph- 50Hz Fuse: 16A-CEE plug Dimensions of machine in working position: 1120-1136 x 626 x 1501 mm (WxDxH) Dimensions of machine in resting position: 1052 x 626 x 1501 cm (WxDxH) Input height with 40 kg hopper: 1501 mm Net weight: 410 kg SPECIAL accessories, prices on request: - Stainless steel drag for pre-wrapping - Frequency converter for continuously adjustable speed of the dough output belt - Take-off roller on chamber output - Short rounding bar - Higher ground clearance 10/15/20 cm - Additional power connection for connection to work table / rounding beam etc. >> 400 V high current / 3 Ph >> 230 V light current / 1 Ph or 3 Ph