Condition: excellent (used), GWK TECO CS 90 E mold temperature controller, water, 95ºC, heating power 6 kW, cooling power 23 kW Lrsdpfx Aoznl Duogpjp Features: - Display of functions and errors. - Access to device control at various password-protected levels. - Comparator (monitoring of momentary value parameter tolerance values ​​with alarm signaling). - Electronic medium level control with dry-run protection. - Automatic filling and refilling with medium level monitoring. - Additional option for manual filling with treated water. - Automatic air venting. - Leaky mold management function. - Mold emptying. Control / Security: - Temperature sensor in the power supply circuit. - Overheating protection. - Contactless heating control with solid-state relays. - Safe temperature reduction upon shutdown. - Acoustic alarm signal (horn). - Symmetrical network load with three-phase drive and three-phase heaters. - 3-fold safety heating exclusion

Condition: used, Year of construction: 2020, Manufacturer: MORETTO, Model: X Dryer XD21A, Year of manufacture: 2020, Serial no. 052200890, 4.7 kW, Drying container, Model OTX80 VP, Chassis, Model SRD21, Conveyor, Model Hopper Loader R6C42K3, Year of manufacture: 2020, Serial no. 2005136 Lrjdpszn Andsfx Agpjp +++ Please note: This item is part of an online auction! +++

Condition: used, Year of construction: 2007, Manufacturer: KRAUSS MAFFEI, Type: KM350-1900 C2, Year of manufacture: 2007, Serial no. 61009348, Control system, Manufacturer: Krauss Maffei MC5, Clamping force: 350 t, Screw diameter: 60 mm, Die opening: 1,450 mm, Clear opening horizontal/vertical: 710/710 mm, 6 cascades, 16 hot runner nozzles, 2 hydraulic core pullers per side (DS/AS), Shot weight: 700 g, Parts removal robot, Manufacturer: Sepro, Type SR4020S3, Year of manufacture: 2005, Serial no. P12424 Ljdozn Amyspfx Agpsrp 47,952 hours (30,821 pure production hours) +++ Attention: Machine is part of an online auction! +++

Condition: used, Year of construction: 2018, Serial no. 221921, control system, manufacturer Engel, type CC300, clamping force 1,700 t, 2 injection units, rotary table, installation height min./max. 800 - 1,600 mm, platen distance 3,350 mm, clear width horizontal/vertical 1,850 / 1,415 mm, 16 cascades, 64 hot runner nozzles, core pulls hydr. 4 (DS) / 4 (AS), screw diameter 105 / 50 mm, shot weight 4,050 / 410 g, operating hours 22,401, machine weight 75,400 kg, mold temperature control unit, manufacturer Oni, type Rhytemper FlexControl 32, 4x 8-channel block modules 125 °C, 6-channel block modules 125 °C, visualization unit, parts removal handling system, manufacturer Engel, type Viper 60, 5 axes (X, Y, Z, C, B axis), nozzle spacing 300 mm, year of manufacture 2018, serial no. 221938, part enclosure, discharge conveyor, mobile conveyor, manufacturer Engel, type BGR FB100 KMAT, year of manufacture 2018, serial no. 2144098, length approx. 4,200 mm, width 1,000 mm, external temperature control unit and material dosing system are not included in this item. Damages: hydraulic hoses leaking. +++ Attention: Machine is part of an online auction! +++ Ledpfx Ajy I R Tqsgporp

Condition: new, Year of construction: 2005, screw size 60 mm injection shot weight in Polysterol 607 g/PS closing pressure 3200 kN Control SELOGICA mould space 300 mm clamping plate 1040 x 1040 mm opening stroke 700 mm Lodpfxsvkqfae Agperp total power requirement 96 kW weight of the machine ca. 17 t dimensions of the machine ca. 7 x 2.2 x 2.3 m This plastic injection moulding machine is in very good condition, can be inspected by can be inspected at the seller's premises by prior arrangement and is supplied incl. Multilift H. Operating hours: 42878h

Condition: ready for operation (used), Year of construction: 2010, operating hours: 60,159 h, clamping force: 5,000 kN, screw diameter: 90 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, This 3s Krauss Maffei 500-4300 CX was manufactured in 2010. It features a clamping force of 5000 kN and a maximum shot weight of 2084 g, making it suitable for high-quality injection molding applications. With a screw diameter of 90 mm and an injection pressure of 1839 bar, this machine offers robust performance. Consider the opportunity to buy this Krauss Maffei 500-4300 CX hydraulic injection moulding machine. Contact us for further details. • Clamping unit • Tool weight: DS 3950 kg / AS 5260 kg (total 7900 kg) • Min. tool diameter: 560 mm • Opening stroke: 1170 mm Lsdpfx Agjyg Hz Hjporp • Tool installation height: min 480 mm; max – • Max plate spacing: 1650 mm • Mounting plates (H × V): 1270 × 1200 mm • Clear column spacing: H 900 mm / V 800 mm • Centering ring diameter: 200 mm • Ejector • Stroke: 250 mm • Ejection force: 95.4 kN • Retraction force: 48.6 kN • Pneumatic ejector: yes • Core pulls / controls • Core pull control: 2 (AS) + 2 (DS) • Closing nozzle: 2 hydraulic / 0 pneumatic • Process control (SPC): yes (Kistler, p=2 / t=0) • Printer interface: no / 12-port USB • Hot runner control: no • Injection unit 1 • L/D ratio: 20 • Screw diameter: 90 mm • Max. stroke volume: 2290 cm³ • Max. shot weight (PS): 2084 g • Injection pressure: 1839 bar • Plasticizing rate: 185.8 g/s • Screw speed: 270 rpm • Nozzle bore: 6 mm • Pump power / Heating power: 90 kW / 44 kW • Other • Max. crane load: 10 tons • 2K-capable: no • Filter nozzle/mill: no • It is a standard fully hydraulic 2-plate clamping system with fully hydraulic screw drive and constant motor. • Operating hours: 60,159 h Additional equipment • Linear robot: KRC6-2 ARC-C • Axes: X/Y (standard), Z present • 69,880 hours • Wittmann handling included • Optional: second unit from 2010 available, without Wittmann handling: 60,150 hours

Condition: excellent (used), Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology, agglomerator -Condition: unused, without controls -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 Ljdpfezbk Tisx Agperp -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Inlet: Ø 400 mm -Ejection: Height adjustable -Quantity: 3 pieces available -Price: per piece -Dimensions: 1160/2335/H1550 mm -Weight: 2100 kg

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 203836, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection weight: 90 g, total length: 3,800 mm, total width: 2,100 mm, total height: 3,100 mm, overall weight: 8,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, For sale is a vertical injection molding machine from the manufacturer ENGEL, model Insert 330V/80 Rotary (800 kN / 80t). Technical data: Machine type: Insert 330V/80 Rotary Year of manufacture: 2015 Machine number: 203836 Design/Construction: Vertical unit with rotary table Control system: ENGEL CC300 Drive technology: Ecodrive CLAMPING UNIT: Clamping force: kN 800 (80 t) Clamping unit design: Vertical / column-free or barrier-free Table design: 2-station rotary table INJECTION UNIT: Injection unit type: Type 330 Screw diameter: 30 mm Theoretical displacement volume: 99 cm³ Injection part weight: 90 g/shot Nozzle type: Needle-close nozzle Injection unit installation position: Vertical, from above HYDRAULICS, DRIVE, CONTROL CABINET & INTERFACES: Drive concept: ENGEL Ecodrive (energy-optimized) Automation interface: Euromap 67.1 Safety systems: Light curtain / protective enclosure for the work area MACHINE DIMENSIONS, TRANSPORT, AND WEIGHTS Installation dimensions (basic machine): 3,800 x 2,100 x 3,400 Transport dimensions: 3,800 x 2,100 x 3,100 mm Required hall height: 3,800 mm Total weight: 8,500 kg Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Lrjdpjznl Erjfx Agpop Inspection possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Gjbn N Ay Dowza Dxogoil Do you need a high-quality, yet affordable, metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 186931, clamping force: 600 kN, screw diameter: 35 mm, injection pressure: 1,820 bar, injection weight: 132 g, total length: 3,665 mm, total width: 1,485 mm, total height: 1,990 mm, overall weight: 2,330 kg, pressure: 1,820 bar, warranty duration: 6 months, Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 320C 600-250U injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Lrodpfx Aszk D Dxogpjp Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: used, Used Baker Perkins model MP24PH 40:1 L/D twin screw extruder. - Manufacturer: Baker Perkins - Model: MP24PH 40:1 L/D - Number of screw: Twin Screw Extruder - Rotations: co-rotating - Screw speed range: 0 - 600 rpm - Motor power: 11.2.5 kW, variable speed Lrsdpfozn Nn Djx Agpjp Barrel: - Maximum operationg temperature: 200°C - Nominal barrel lenght: 40:1 L/D - Barrel type: one piece horizontally split clamshell barrel - Heating: electrically heated via cartrige type heaters - Cooling: water-cooled via cored barrel backing block Includes: - Touch HMI integrated in switchboard - Single screw powder feeder - Liquid feed system - liquid hopper, gear pump and flow meter

Condition: excellent (used), Year of construction: 2010, Engel Victory 1050/220 Tech with Wittmann W721 robot Year of manufacture: 2010 Injection unit: Screw diameter: 55 mm Shot weight: approx. 480 g Injection pressure: 2053 bar Dosing volume: 511 ccm Clamping unit: Clamping force: 220 t Tie bar spacing: 0x0 mm Platen size: 880x830 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - Touchscreen Additional equipment: Tie-bar-less machine Euromap 67 Robot interface Air valve x 3 Hydraulic core pull x 3 Control system with hot runner system x 30 Injection unit hardened - bimetal Proportional valve on the injection unit – precise injection Dimensions: Weight: 12200 kg Length/Width/Height: 5.66x1.88x2.10 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request Lodpfszpaukex Agpsrp

Condition: excellent (used), Year of construction: 2016, Engel Victory 2050/260 Tech Ecodrive with Engel Viper 20 robot / hybrid machine / operating hours: approx. 20,000 hours in automatic mode Year of manufacture: 2016 Injection unit: Screw diameter: 70 mm Shot weight: approx. 1020 g Injection pressure: 1780 bar Dosing volume: 1155 ccm Clamping unit: Clamping force: 260 t Tie bar spacing: 0x0 mm Platen size: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 300 - touchscreen Additional equipment: Production line with Engel Viper 20 robot Tie-bar-less, hybrid machine: energy-saving and very quiet Operating hours: approx. 20,000 in automatic mode Ledpfx Aezpat Tsgpjrp Robot interface Air valve x 4 Hydraulic core pull x 2 on the side of the moving platen Hydraulic core pull x 6 on the side of the stationary platen Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by an inverter - energy saving Proportional valve on the injection unit – precise injection Kistler sensor - tool pressure control Automatic, hydraulically operated tool mounting system, controlled via the machine control panel Integrated automatic cooling water regulator e-flomo with heating function Robot Engel Viper 20 Year of manufacture: 2016 6-axis robot: 6 axes are driven by servo motors (electric): X, Y, Z, B, C, A Payload: 11 kg Touch control panel Safety package for robots Robot with adapter, conveyor belt and safety enclosure Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 21000 kg Length/Width/Height: 7.36x2.06x2.37 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2010, Engel Victory 2550/350 Tech with Engel Viper 40 robot Year of manufacture: 2010 Injection unit: Screw diameter: 80 mm Shot weight: approx. 1410 g Injection pressure: 1638 bar Dosing volume: 1558 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 0x0 mm Platen size: 1200x1100 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional equipment: Production line with Engel Viper 40 robot Tie-barless machine Lredpfx Aozpatmogpsp Robot interface Air core puller x 4 on the side of the fixed platen Hydraulic core puller x 2 on the side of the moving platen Hydraulic core puller x 1 on the side of the fixed platen Control system with hot runner system x 12 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection Robot Engel Viper 40 Year of manufacture: 2010 6-axis robot: 5 axes are driven by servomotors (electric): X, Y, Z, B (rotation), A; axis C - pneumatic Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt available for an additional charge Dimensions: Weight: 25100 kg Length/Width/Height: 7.59x2.18x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2020, Krauss Maffei KM 81-380 PX with Sepro Industrial Robot Succes 7 / Electric Machine Year of manufacture: 2020 Injection unit: Screw diameter: 35 mm Shot weight: 140 g Injection pressure: 2429 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x370 mm Platen size: 560x510 mm Ejector: electric Clamping unit: toggle Control system: MC6 - Touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air valve with vacuum x 2 Hydraulic core pull x 1 Control system with hot runner nozzles x 15 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Robot Industrial Robot Succes 7 Year of manufacture: 2017 4-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z; axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt and safety enclosure Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 7900 kg Length/Width/Height: 4.90x1.53x1.85 m Ledpjzparisfx Agpjrp All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 121-380 PX / Electric Machine Year of manufacture: 2019 Injection unit: Screw diameter: 35 mm Shot weight: 140 g Injection pressure: 2429 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 120 t Lrjdpfx Aezpaqxegpjp Tie bar spacing: 470x420 mm Platen size: 640x590 mm Ejector: electric Clamping unit: toggle Control: MC6 - Touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air valve with vacuum x 2 Hydraulic core pull x 1 Control system with hot runner nozzles x 15 Injection molding unit is wear-resistant and corrosion-resistant Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Dimensions: Weight: 9400 kg Length/Width/Height: 5.10x1.60x1.88 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 161-540 PX / Electric Machine Year of manufacture: 2019 Injection unit: Screw diameter: 40 mm Shot weight: 206 g Injection pressure: 2377 bar Dosing volume: 226 ccm Clamping unit: Clamping force: 160 t Tie bar spacing: 520x470 mm Platen size: 710x660 mm Ejector: electric Clamping unit: toggle Control: MC6 - Touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. in automatic operation Euromap 67 Robot interface Air valve with vacuum x 2 Hydraulic core pull x 1 Control with hot runners x 15 Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - servomotor driven by an inverter - energy saving Lredpfjzpap Isx Agpjp Central lubrication Parallel movements Automatic tool height adjustment Dimensions: Weight: 13200 kg Length/Width/Height: 5.60x1.72x1.95 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 350-2000 AX / Electric machine / Production line with Krauss Maffei LRX150-1018 robot Year of manufacture: 2011 Injection unit: Screw diameter: 60 mm Shot weight: 720 g Injection pressure: 2420 bar Dosing volume: 792 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 810x730 mm Platen size: 1110x1030 mm Ejector: electric Clamping unit: toggle type Control: MC6 - Touchscreen Additional equipment: Electric machine: energy-saving and very quiet Euromap 67 Robot interface Air core pull x 2 on the side of the fixed platen Hydraulic core pull x 3 on the side of the moving platen Control system with hot runner nozzles x 10 Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - driven by a servo motor with inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Robot Krauss Maffei LRX150-1018 Year of manufacture: 2011 Ledezpapnspfx Agperp 4-axis robot: 3 axes are driven by servo motors (electric): X, Y-telescopic, Z; Axis B-rotation, Axis C – pneumatic Travel distances in axes: X-900, Y-1800, Z-2500 Safety package for robot Robot with adapter, conveyor belt, and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 22600 kg Length/Width/Height: 8.00x2.35x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 88-MK6 with Sepro Industrial Robot Succes 7 / Hybrid Machine Year of manufacture: 2021 Injection unit: Screw diameter: 41 mm Shot weight: 246 g Injection pressure: 1890 bar Dosing volume: 271 ccm Clamping unit: Clamping force: 128 t Tie bar spacing: 410x410 mm Platen size: 620x605 mm Ejector: electric Clamping unit: toggle Control: BECKHOFF - Touchscreen Additional equipment: Ledpfx Agozpanwspsrp Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor with inverter drive - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine was serviced in Germany Robot Samfacc Year of manufacture: 2022 4-axis robot: 3 axes are driven with servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt, and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 4000 kg Length/Width/Height: 4.90x1.30x1.80 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 128-MK6 with Samfacc robot / hybrid machine Year of manufacture: 2021 Injection unit: Screw diameter: 41 mm Shot weight: 246 g Injection pressure: 1890 bar Dosing volume: 271 cc Clamping unit: Clamping force: 128 t Tie bar spacing: 410x410 mm Platen size: 620x605 mm Ejector: electric Clamping unit: toggle Control: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Lrodpfxozpankj Agpjp Control system with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine was serviced in Germany Samfacc robot Year of manufacture: 2022 4-axis robot: 3 axes are driven by servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 4000 kg Length/Width/Height: 4.90x1.30x1.80 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 208-MK6 with Samfacc robot / hybrid machine Year of manufacture: 2021 Injection unit: Screw diameter: 52 mm Shot weight: 502 g Injection pressure: 1893 bar Dosing volume: 552 ccm Clamping unit: Clamping force: 208 t Tie bar spacing: 530x530 mm Platen size: 790x765 mm Ejector: electric Clamping unit: toggle Control system: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Lsdpfx Agszpandjporp Control system with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by inverter - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine has been serviced in Germany Samfacc robot Year of manufacture: 2022 4-axis robot: 3 axes are driven by servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt available at an additional cost Dimensions: Weight: 6800 kg Length/Width/Height: 6.10x1.50x2.00 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 468-MK6 with Samfacc robot / hybrid machine Year of manufacture: 2021 Injection unit: Screw diameter: 83 mm Shot weight: 2043 g Injection pressure: 1840 bar Dosing volume: 2245 ccm Clamping unit: Clamping force: 468 t Tie bar spacing: 830x830 mm Platen size: 1210x1165 mm Ejector: electric Clamping unit: toggle Control: BECKHOFF - touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 2 Control with hot runner system x 8 Injection unit hardened - bimetal Lrsdpfx Agozpamtspsp Main motor of the machine - servo motor driven by inverter - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine was serviced in Germany Samfacc robot Year of manufacture: 2022 4-axis robot: 3 axes are driven by servo motors (electric): X, Y (telescopic), Z; axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt and safety guard Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 19800 kg Length/Width/Height: 8.80x2.00x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, Arburg 1200T 1000-290 / Vertical machine with a rotary table Ledpfx Agszpal Ajpjrp Year of manufacture: 05.2012 Injection unit: Screw diameter: 30 mm Shot weight: 97 g Injection pressure: 2500 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 0x0 mm Platen size: 1200 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Vertical machine with a rotary table Euromap 67 Robot interface Air valve x 6 Hydraulic core pull x 2 Control with hot runner system x 18 Injection unit hardened - bimetal Servo motor on the injection unit – fast suction and fast injection Proportional valve on the injection unit – precise injection Self-closing nozzle Primus sensor - tool pressure control Rotary table diameter: 1200 mm Dimensions: Weight: 7200 kg Length/Width/Height: 4.36x1.71x3.66 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: used, Used Cumberland Model 15x24 granulator. Unit has a 15" x 24 " feed throat with hopper. Unit has a bed cutting chamber, the rotor is an open 3-blade with the 2 bed knives and 3 rotor knives driven by 50HP, 1475rpm motor. Weight: Estimated: Kg1000.0 Lsdpfxszimz Dj Agporp Dimensions: 1400mm X 1900mm

Year of construction: 2013, operating hours: 42,681 h, condition: ready for operation (used), controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2013. This Krauss Maffei 35-180 CX features a plasticising size of 180 and a screw diameter of 28 mm. With 3 units available, consider the opportunity to buy this Krauss Maffei 35-180 CX hydraulic injection moulding machine. Contact us for further details. • Plasticising Size: 180 • Plasticising Arrangement: H • Screw Diameter: 28 mm Lrsdpfx Aeym Uv Sogpep • Nozzle Radius: 10 mm • Nozzle Bore: 4 mm • 3 units available

Condition: ready for operation (used), Year of construction: 2003, clamping force: 1,250 kN, total width: 1,500 mm, total height: 2,100 mm, overall weight: 6,000 kg, product length (max.): 4,400 mm, Hydraulic injection moulding machine manufactured in 2003. This Krauss Maffei KM125-520C2 features a clamping force of 1250 kN and an opening stroke of 900 mm. It has a screw diameter option of 35 / 40 / 45 mm and a shot volume of approximately 156 / 204 / 258 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM125-520C2 machine we have for sale. Contact us for further details. • Opening force: 35 / 28 kN • Tie bar spacing (H × V): 470 × 470 mm • Mould installation height min.: 300 mm • Opening stroke: 900 mm • Ejector stroke: 150 mm • Ejector force: 22 / 10 kN • Injection unit: SP 520 • Screw diameter options: 35 / 40 / 45 mm • Shot volume: approx. 156 / 204 / 258 cm³ • Injection pressure: up to approx. 1800+ bar (depending on screw) • Screw speed: approx. 391 / 489 rpm • Plasticizing rate (PS): approx. 22–41 g/s (depending on screw) • Pump motor power: 18.5 kW • Installed heating capacity: 13 kW • Oil filling quantity: 345 l • Max. mould weight: 1485 kg • Power supply: 3 phases • Operating voltage: 400 V • Frequency: 50 Hz Additional equipment • Cooler (included) Lrodpoylkxaefx Agpop