Used other plastic processing machinery for sale (63)

Condition: good (used), 3DGENCE Type: Industry F420 Year of manufacture: 2021 Technical data: Build volume: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900 mm x 950 mm x 1950 mm Printing system: Dual extruder equipped with automatic cleaning system Filament diameter: 1.75 mm Printing materials: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: Soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic swapping system Nwsdpfxjzg Tzls Alcsh Print head temperature (max.): 500°C Heated bed temperature (max.): 180°C Build chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Condition: used Scope of delivery: (see pictures) Weight: 350 kg (Changes and errors in technical data and specifications excepted!) For further questions, we are happy to assist you by phone.

Condition: used, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2026-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes Nwodpfxowgc I Ro Alcsh • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Year of construction: 2024, condition: ready for operation (used), Glazing bead saw manufactured in 2024. This ROTOX GLA 401 features simultaneous cutting of 4 glazing beads at 45° and milling of fixing holes. It includes pneumatic material clamping and an electric locking machine cover for enhanced safety. The machine accommodates PVC profiles with a maximum section of 375 × 45 mm and offers a cutting length of up to 260 mm with a length stop. If you are looking to get high-quality cutting capabilities, consider the ROTOX GLA 401 machine we have for sale. Contact us for further details. • Function: Simultaneous cutting of 4 glazing beads (45°) and milling of fixing holes • Pneumatic material clamping: Yes • Pneumatic pressure: 2 bar • Pneumatic pressure gauge with filter: Yes • Electric locking of machine cover: Yes • Clamping plates: Tool-free • PVC profile section capacity: Min 50 × 50 mm; Max 375 × 45 mm Nwjdpfxszg Igpo Alceh • Cutting length: 200 mm (without length stop); 260 mm (with length stop) • Electrical connection: 400 V / 50 Hz • Installed power: 1.1 kW • Profile list: Available • Operating instructions: English • Machine inscription: Italian • Attachment side: Right

Condition: excellent (used), Fill 3D Ultrasonic Cutter Here we offer a Fill 3D ultrasonic cutting system. FILL 3D ULTRASONIC CUTTER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour cutting of fiber-reinforced plastics using ultrasound-actuated cutting systems. Your advantages: Ergonomic loading and unloading Simple creation of cutting programs (NC control) Space-saving system concept (alternative to a robot) High repeatability High process stability Simple and fast tool changes Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic cutter with low space requirements and simple kinematics. The Siemens CNC 840 D control system allows the cutting device to be programmed like a machine tool. Tool corrections or path changes can be easily carried out directly on the machine. As standard, the machine is equipped with a 20 kHz ultrasonic cutting unit. However, it can also be equipped with alternative systems. The cutter is equipped with a separate rotary axis Nedpfx Aezdy Iajlcswh to allow cutting of tight radii and to save other axis movements (5 + 1 axes). Technical data: Machine data Part length max. 1,000 mm Part width max. 900 mm Part height max. 400 mm Path repeatability +- 0.1 mm Positioning accuracy +- 0.2 mm Load capacity approx. 30 kg Electrical control Siemens Sinumerik 840D sl Technical data overall system: Fill 5-axis guided CFRP cutting system Type: SM - 03 Electricity: Supply voltage: 3 x 400 V AC Supply frequency: 50 Hz Rated current: 30 A Fuse: min. 50 A / max. 63 A Control voltage: 24 V DC Pneumatics: Quality class compressed air: according to ISO 8573-1:2010 Inlet air: 5/6/4 System pressure: min. 6 bar Supply connections Illustrations in "Connection diagram" on page 3/7. Noise: Continuous sound pressure level: 80 dB(A) Dimensions: Length: approx. 3,920 mm Width: approx. 3,400 mm Height: approx. 3,500 mm Weight: Total weight: approx. 1,500 kg Painting: Base frame pebble gray: RAL 7032 Cross-members pebble gray: RAL 7032 Moving parts pebble gray: RAL 7032 Control cabinets light gray: RAL 7035 Type: Fill 5-axis guided CFRP cutting system Type: SM - 03 Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 2016, Synchronization of the saw carriage - 6 pieces available Nsdpfx Ajuzxrgelcewh

Year of construction: 2000, condition: excellent (used), machine/vehicle number: 12086, COVER LABELING SYSTEM SCHLEUTER GU 2 DU WITH CIRCULAR STATION FOR PLACING SPOONS RNA SRC-N-630-1R Performance: 60 lids per minute Consists of: Nedpfsn Awh Uox Alcewh - Stacker - Circular station for placing spoons - Labeling unit - Stapler

Year of construction: 2016, condition: excellent (used), machine/vehicle number: 216 105, BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Equipment / Additional information: Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" Nwjdpfx Ashqmghslcjh - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 500 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL

Year of construction: 2000, condition: excellent (used), machine/vehicle number: 12088 10, Performance: 125 cups per min. (gross) Consists of: -Destacker -Bottom label dispenser -Side label dispenser 1 + 2 and 3 + 4 -Station for finishing the gluing of the side labels (ironing system) -Control station with camera surveillance -Stacker with counter -Outfeed conveyor for finished product Njdjn D Hczepfx Alcjwh The machine can also label round cups (160-180°, around). Cup height: 120-130 mm

Year of construction: 2000, condition: excellent (used), Available: Immediately Nodpfx Alsyrfwwscswh

Year of construction: 2005, condition: excellent (used), machine/vehicle number: 3.65-00001, WITH COUNTING STATION Wiring Diagram No.: 8.62-00001 Equipment / Additional information: Consists of: Nwedpfopr Ut Nsx Alcsh -Infeed conveyor -Machine -Counting station -Discharge belt

Year of construction: 2000, condition: excellent (used), machine/vehicle number: 12087, COVER LABELING SYSTEM SCHLEUTER GU 2 DO WITH 2xSTATIONS FOR PLACING SPOONS Nwodpjn Awndofx Alcjh Performance: 90 lids per minute (spoon inserted diagonally) Consists of: - Stacker - 2xStations for placing spoons - Labeling unit - Delivery station

Condition: excellent (used), COVER LABELING SYSTEM (Zweckform with Schleuter label dispenser) Age : ca. 1990 Performance: 100 cups/lids per minute Equipment / Additional information: Consists of: - Stacker - Labeling unit Nwodpsn D E Hpsfx Alceh - Stapler

Condition: excellent (used), Year of construction: 2011, operating hours: 70,792 h, machine/vehicle number: 1001, Article-No.: DSDX.2C Equipment / Additional information: The compressor is water-cooled & has heat recovery. Rated power: 160.0 kW Motor speed: 1500 rpm Max. operating pressure: 8.5 bar Nwjdpfx Ajyhpppjlcsh Ambient temperature: 3°C/45°C

Year of construction: 2011, operating hours: 39,521 h, condition: excellent (used), machine/vehicle number: 1002, Article-No.: DSD.2C Equipment / Additional information: The compressor is water-cooled & has heat recovery. Rated power: 110.0 kW Nwjdpoyhpqtjfx Alcjh Motor speed: 1485 rpm Max. operating pressure: 8.5 bar Ambient temperature: 3°C/45°C

Year of construction: 2014, condition: excellent (used), Heating rail TG 200 mO from Herz for heating thermoplastic materials (e.g., acrylic glass). After localized heating, the acrylic glass sheet can be easily bent. A video of the machine in operation can be sent upon request. Two-sided heating system with infrared emitters and digital temperature controller, as well as an automatic timer. The timer starts automatically when the upper flap is closed, setting it to the pre-set value. After the set time has elapsed, a warning signal sounds to indicate that the material can be removed. Maximum working width approx. 2000 mm. Maximum sheet thickness, according to the manufacturer, is up to 12 mm due to heating on both sides of the sheet. Connection value: 230 volts / 2800 watts. With a practical parallel stop up to 1000 mm deep. CE marking. Operating manual. Dimensions approx. 2500 x 1200 x 200 mm (L x W x H). Weight approx. 35 kg. Nedpfx Alezafiiocjwh The machine can be demonstrated on-site after scheduling an appointment. We only offer machines that are readily available in our warehouse for demonstrations, see "other offers from this supplier".

Condition: like new (used), functionality: fully functional, The LANCO side channel blower is for sale. Mounting plate dimensions: 260 mm x 115 mm 220 mbar Nodpev T Uzkofx Alcewh 210 m3/h RPM 2850 1.5 kW

Condition: excellent (used), functionality: fully functional, Feller hot runner controller, 80-channel. In excellent condition, from a cleanroom injection molding facility specializing in medical technology. Njdpozdu Hqjfx Alcewh

Condition: like new (used), Two cabinets with 12 drawers: ejectors – round and flat. Price per item only €10. Nwsdoxz Rx Dspfx Alcjh

Condition: excellent (used), This conveyor belt machine is ideal for shearing the edges of small carpet samples. Diagram of K-50 The key component of the KS 50 edge beveling machine is our SE 50 cutting unit. The machine is designed with angle adjustment from 0° to 60°. The depth of cut is adjustable from 2 mm to 22 mm. The guide plate for carpet samples can be easily adjusted steplessly from 20 mm to 210 mm. Quick and easy adjustments can be made by releasing the locking lever. The conveyor belt is driven by a three-phase motor. Nwodpfx Asud Dqkjlcsh The speed of the cutting motor and the conveyor belt is infinitely adjustable by means of frequency converters. Larger pieces of carpets are guided manually as they pass through. The cutting width is 50 mm.

Condition: used, The two hot runner systems from Feller are for sale, priced at €1,350 each. Nedoza U Egopfx Alcowh

Condition: excellent (used), Year of construction: 2011, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 5921, type of input current: three-phase, input voltage: 2,800 V, pressure: 6 bar, input current: 41 A, feed length X-axis: 4,300 mm, feed length Y-axis: 2,300 mm, feed length Z-axis: 1,200 mm, total height: 4,310 mm, total length: 7,310 mm, total width: 7,130 mm, input frequency: 50 Hz, We offer this excellent 5-axis CNC machining center, the CMS SINTESY 4323 MPT, designed for trimming plastic and laminate parts, manufactured in 2011. Manufacturer: CMS S.p.A. Model: SINTESY 4323 MPT Year of manufacture: 2011 5 interpolated axes Linear axes: X-4300, Y-2300, Z-1200 Rotary axes: B +/- 120 deg, C +/- 240 deg Electrospindle: 7.5 kW Installed power: 28 kW Compressed air consumption: 400 nl/min Nwodpfx Aezcpkcslceh Tool magazine: 12 positions Extendable tables Dustproof cabin – enclosed machine design. If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Year of construction: 2011, operating hours: 35,000 h, condition: ready for operation (used), This KIEFEL KLS 86/235 was manufactured in 2011. It features a maximum forming area of 860 x 2350 mm and a maximum forming part height of 350 mm. The machine is equipped with a powerful vacuum system with a suction power of 2 x 300 m³/h. If you are looking to get high-quality laminating capabilities, consider the KIEFEL KLS 86/235 laminating system we have for sale. Contact us for further details. • Operating voltage: 3 x 400V + N + PE / 50 Hz • Connected load: 225 kVA • Nominal current: 264 A • Preliminary fuse: 315 A • Short-circuit strength: 50 kA • Control voltage: 24 VDC • Max. forming area: 860 x 2350 mm • Min. forming area: 340 x 1200 mm • Max. forming part height: 350 mm • Film level: 1805 mm • Max. lower table stroke: 1330 mm • Max. upper table stroke: 585 mm • Rotary upper table: 4-part (Forming / Punching) • Punching force upper table: 30 kN • Punching counterforce lower table: 30 kN • Operating pressure: 6 bar • Compressed air requirement: approx. 300 Nl/cycle • Max. roll diameter: 600 mm • Max. film width: 1100 mm • Max. film roll weight: 400 kg • Coil diameter max: 76 mm • Vacuum system suction power: 2 x 300 m³/h • Vacuum system power: 7.6 kW • Tank volume: approx. 1000 L • Side channel blower suction: 14 m³/min • Side channel blower power: 8.5 kW Njdpfxsy Rprqs Alcjwh • Feed width chain rails: max. 940 mm

Condition: used, functionality: fully functional, Year of construction: 2014, power: 8 kW (10.88 HP), platform length: 4,100 mm, overall weight: 2,850 kg, transport length: 5,700 mm, transport width: 1,330 mm, transport height: 1,300 mm, construction height: 1,300 mm, Equipment: CE marking, The WORK SP 4000 CNC butt welding machine for plastic sheets is manufactured by the Czech company METAL WORKING CZ, s.r.o. It was produced in 2014, is in excellent condition, and comes with a spare Teflon coating. This is a high-tech industrial machine with CNC control, designed for the precise welding of thermoplastic sheets and panels. The main technical parameters and features of this machine series include: Main technical parameters: Maximum working width (welding length): 4000 mm, allowing for the processing of very large plastic sheets. Thickness of materials to be welded: Typically in the range of 2 mm to 25–30 mm (depending on the specific modification and type of plastic). Compatible materials: Thermoplastic sheets made of PE (polyethylene), PP (polypropylene), PVDF (polyvinylidene fluoride), and PVC (polyvinyl chloride). Welding type: Butt-welding with a heating element, using the heated element / hot plate welding method. Control and CNC functionality: Fully automatic cycle: The CNC control precisely manages all phases of the welding process: preheating, transfer time, welding pressure creation, and cooling time. Nwedpfx Aljzdiz Nscoh Material database: A system with pre-set welding parameters according to international standards (e.g., DVS standards for welding plastics). Data logging: Automatic generation and recording of welding protocols for quality control (containing information on pressure, temperature, and cycle duration). Advantages of the design: High mechanical stability: A massive steel frame ensures even distribution of pressure along the entire length of the 4-meter sheet. Hydraulic system: Precise adjustment of the clamping force, guaranteeing a homogeneous weld seam without internal stresses. Teflon coating: The heating element is equipped with a high-quality non-stick coating for easy cleaning and to prevent material burning. Length: 5700 mm Width: 1330 mm Height: 1300 mm Weight: 2850 kg Working length: 4100 mm Working height of the machine: 950 mm Minimum thickness of the plastic sheet: 4 mm Maximum thickness of the plastic sheet: 40 mm Machine power: 8 kW Operating voltage - electrical circuits: 3 PEN 50Hz 400/230V Air consumption: 0.8 m³/h Minimum pneumatic pressure: 0.8 MPa Maximum pneumatic pressure: 1.0 MPa Standard for electrical equipment: EN 60204-1 Applicable basic and technical standards: See Chapter 3.3 of the manual Maximum noise level at the workstation: 70 dB If you have any further questions or need more information, please send us a message or call.

Condition: good (used), Manufacturer: MOSCA, Model: RO-M-P2, Year of manufacture: 1997, Serial No.: 46957 Nwsdpfsy Ez Tijx Alcjh

Year of construction: 2013, condition: excellent (used), functionality: fully functional, machine/vehicle number: 6234-05-013, Equipment: CE marking, type plate available, I am offering a used S.M.R.E. (SolarEdge) cutting plotter designed for tracing and cutting acrylic and synthetic fabrics. The machine is equipped with 4 heads, including 3 drag knife heads (2 rotary blades for different material thicknesses, a finger blade) and a plotter pen. Main parameters: - table width: 3200 mm, Nedpfxjxcvt Ao Alcowh - rated power: 8 kW, - supply voltage: 400V, - max. roll diameter: 800 mm, - automatic roll feeder with material guiding correction, - manufacturer's software for pattern design, - vacuum fan for holding down the material on the worktable. The machine is fully functional and still supported by manufacturer's service. It remains connected to power and is in active operation.