Used Honing Tool for sale (37,239)

Condition: good (used), Year of construction: 2001, Equipped with: Chjdjrualpspfx Apasd Power Stock Fanuc 5-Axis CNC Control 160M 400mm Honing Wheel X Axis Pulse Generator Coolant System w/Twin Filters Magnetic Chip Separator Honing Tool Set up for Last Job is Still in Machine Internal Diameter of Honing Tool on Machine is 14" Work Light Power Door Auto Dress 5-Part Program Instruction Book for 16M Control Instruction Book for Set-Up and Operation Specifications: Maximum Outer Diameter: 250 (350) Minimum Outer Diameter: 30 Maximum Overall Length: 400mm Maximum Tooth Width: 45mm Module: 1.0-3.0 Cross Feed Device(Z Axis): 430mm Max. Travel Honing Wheel Cutting Feed Device(X Axis): 370 Max. Travel Honing Wheel Swing Device(C Axis): Swing Angle: +30 Degress Honing Wheel Rotation Drive Device(A Axis): Honing Wheel Spindle Speed R/Min: 500 Honing Wheel Outer Dia.: 300 (400) Maximum Honing Wheel Width: 50mm Crowning Device (Y Axis): Maximum Rocking Angle: 1.6 Degrees Motor Types: Z-Axis Drive Motor: 1.8Kw X-Axis Drive Motor: 1.8Kw Y-Axis Drive Motor: 0.7Kw C-Axis Drive Motor: 1.8Kw A-Axis Drive Motor: 2.2/3.7Kw Maximum Distance Between Centers: 600mm Center Height: 1,100mm Floor Space: 2,170W X 2,800D X 2,100H Mass Of Machine: 4,500Kg

Condition: used, Year of construction: 2004, functionality: fully functional, Well used Sunnen honing machine with Felsomat loading system. Diameter range (INSIDE Ø)¹: Krossgrinding® tools: 5.46 to 32 mm when loaded with CGT tools TurboHone® tools: 3.81 to 32 mm when loaded with MMT tools Connecting rod tools: 53.8 to 63.8 mm when fitted with CRT tools Larger tools: 25.4 to 101.6 mm Workpiece²: 8 to 150 mm Max. Workpiece weight: 2.0 kg Spindle speed range: 250 to 3,700 rpm, adjustable Standard speed: High torque in the low speed range: 20 to 1,000 rpm, adjustable Stroke speed range: 33 to 500 H/min, adjustable Coolant system Pump motor: 0.18 kW Coolant pump: 5.6 l/min Coolant capacity: 132 l and 11.2 l/min Coolant requirements: Compressed air requirements: 566 l/min at 4.48 bar, 5.52 bar is recommended Temperature range: 0° to 35° C Floor space requirements: (concrete floor) At least 150 mm thick Machine dimensions: L 2946 mm x W 2971 x H 1829 Color: Pearl grey with pewter grey and burgundy decorative stripes Chjdpfxsud Nm Rj Apaod Stand weight: 1,579 kg Noise emissions: < 71 dB (A) continuous load, < 75 dB (A) peak load Special features: Automatic set-up: spindle speed, stroke speed, stroke length, infeed value and sparking Automatic finishing: Standard Machine operating modes Automatic: Manual: Series production Individual production Clamping optional

Condition: used, machine/vehicle number: 200070, functionality: fully functional, grinding belt width: 150 mm, grinding belt length: 2,000 mm, actuation type: electric, MULTI-TOOL (Scantool) Industrial Belt Sander – 150 x 2000 mm – Heavy-Duty – Includes 34 New Belts! Chodpfx Ao Ah Emtspaod Description: Robust, professional belt sander for industrial use! For sale is a solid metal belt sander from the Danish premium manufacturer Multi-Tool A/S (identical to Scantool, technically closely related to GRIT/FEIN). This is the sought-after, wide 150 mm version from the robust 200070 series. Due to its heavy steel and cast construction (Industrial Heavy-Duty), the machine runs with low vibrations and offers good stability when processing heavy components. _____ ABSOLUTE HIGHLIGHT: Large belt sanding package included! With the purchase, 34 high-quality, like-new sanding belts in the 150 x 2000 mm format, worth several hundred euros, are included. Perfectly divided for rough and fine sanding: • 17x sanding belts in grit P40 (roughing / deburring): 8x red, 9x green • 17x sanding belts in grit P80 (intermediate and fine sanding): 8x red, 9x green _____ Technical Data & Details: • Manufacturer: Multi-Tool A/S (Made in Denmark) • Model Series / Type: 200070 series (for 2000 mm belt length) • Belt Sander Dimensions: 150 x 2000 mm (standard size) • Estimated Year of Manufacture: approx. 1980s / 1990s • Spare Parts Availability: generally available through specialized dealers (including GRIT by FEIN / Scantool). • Application Area: Ideal for locksmiths, metal construction, and industrial workshops for steel and stainless steel processing. Condition: The machine is in a good, operational condition. It runs powerfully, and the belt centering system functions properly. The machine can be tested on-site while powered. • The price is ex works (EXW). • Dismantling, proper loading, and transportation must be organized by the buyer or carried out by a commissioned freight forwarder. • Technical specifications are based on available documentation. Subject to prior sale.

Condition: good (used), functionality: fully functional, Year of construction: 2007, including Sheetmaster, Gripmaster, and Toolmaster Year of manufacture: 2007 Chsdjzr Ha Ejpfx Apajd

Condition: used, functionality: fully functional, total height: 1,900 mm, total width: 1,200 mm, overall weight: 1,200 kg, input voltage: 400 V, Equipment: documentation/manual, type plate available, Precision cross-honing machine Used Sunnen Eclipse EC-3500 CGM-27 Bore diameter – Honing range: 1.5 – 165 mm Stroke length – Honing length: 6 – 170 mm Spindle speeds: 200 – 3,000 rpm Stroke rates: 60 – 500 strokes Csdpeyx Dv Hofx Apajhd Total power requirement – Spindle drive: 4.1 kW Stroke motor: 1.1 kW Machine weight: approx. 1200 kg Depth: 1.6 m Width: 1.2 m Height: 1.9 m SICK safety light curtain Oil filtration / filter system for the honing oil is integrated – spare filter cartridges available Horizontal cross-honing machine / honing machine, type EC 3500, and operating manual for the honing machine Documentation/manual, nameplate available An inspection while the machine is powered on is possible after prior appointment. Price upon request All technical specifications are subject to typographical errors and omissions. Sale exclusively to countries within the EU.

Condition: used, functionality: fully functional, The ToolTemp TT 162-E temperature control units are for sale. The price is per unit. Medium: Water Chedpfxe Ahxwio Apaod Heating capacity: 12 kW Cooling capacity: 35 kW Pump: 4 bar Control system: MP 888/MP 694

Condition: like new (used), Year of construction: 2001, Set of clamping cones SK 50 - like new. Hardly used. Cjdjxnldzspfx Apaehd

Condition: used, Year of construction: 2013, functionality: fully functional, Servo spindle press with screw station Rittal Top Therm: SK3304500 Specification: V: 3x380-400 Watt: 25,900 Hz: 50 Csdpfxewu Adbe Apashd The Tool Temp TT-380 servo spindle press with screw station is an innovative and precise machine, ideally suited for demanding manufacturing processes. It stands out for its high accuracy and efficiency, making it a reliable solution for fast and precise screw connections. The integrated screw station enables efficient automation of the screwing process, while the servo technology ensures consistent force and motion control.

Condition: used, Year of construction: 2005, Vertical Internal Honing Machine Chodpfxexwdxij Apajd Manufacturer: NAGEL Type: 3VS8-50T Year of manufacture: 2005 Control system: Nagel 2 machines are available. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 945 h, Type: TT-118 K 3 units Year: 2024 Chsdpfx Apsz A Ec Deaod Operating hours: 945 h, 1136 h, 1139 h Ready for immediate delivery.

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm turning diameter over slide rest 500 mm turning length 4000 mm spindle bore 105 mm spindle turning speed range 5,4 - 720 U/min workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW Csdpoy Nd Sisfx Apajhd total power requirement 14 kW weight of the machine ca. 8 t dimensions of the machine ca. 6,5 x 2,5 x 2 m With 4 position tool holder, face plate with safety cover, steady rest and DRO.

Condition: excellent (used), Year of construction: 2015, Tool-Temp Type: TT-181 Year of manufacture: 2015 Connected load: 9.85 kW Cjdpfjyzg E Nex Apajhd Weight: 55 kg

Year of construction: 2025, operating hours: 5 h, condition: like new (used), functionality: fully functional, Equipment: CE marking, The Toro TX1000 with the Rhino Drive Master is a compact yet powerful mini-skid steer with an attachment designed for quickly and precisely driving posts and pipes into the ground. Work faster and significantly safer than with a manual post driver, sledgehammer, or loader. Level the mast, position the machine, and effortlessly drive an entire fence line into the ground. Key Features & Benefits: The best and most effective combination for driving kilometers of posts. Powerful & Controlled Performance Long-stroke piston for better energy transfer and reduced recoil. Control valve that reduces hydraulic peak pressure. Between 700 and 1200 strokes per minute with a striking force of 203 Joules. Flexible Positioning Adjustable mast: 7° away from the operator, 15° towards the operator – ideal for precise alignment. Mounting from either side – ideal when only one side of the terrain is accessible. Compact & Compatible Ideally used in combination with other mini-skid attachments for efficient site preparation. Chsdjz Irm Tepfx Apajd Versatile Use Suitable for steel and wood round, square, and rectangular posts up to ø150mm outer diameter and 3 meters long. Oil pressure: 20 - 30 LPM at 70-140 bar The Drive Master is available for sale with or without the Toro skid steer loader. The combination is also available separately. The price listed in the advertisement includes the Toro TX 1000 with the Rhino Drive Master.

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Colour: Silvergrey RAL 7001 Weight: Approx. 67 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Suitable for both water and oil media Temperature range max.: Water: 90 °C Oil: 150 °C Heating capacity: Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Cooling capacity: 45 kW at 90 °C Pump capacity: Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Vacuum mode: max. 8 m H₂O Tank capacity: Min. 16 litres, max. 20 litres Connections: Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread Codpfx Ao Ahykkepaohd

Condition: used, diameter div. number 16x tool adaptor HSK-A 63 Chsdpfo Ahzhvox Apaed

Condition: used, Technical details: honing diameter: Ø 400 mm stroke: 600 mm throat: 390 mm table-size: 1.550 x 780 mm table surface area: 1.400 x 480 mm table:: fest total power requirement: 4,1 kW Weight approx.: 2,8 t dimension machine xH: 2,0 x 1,2 x 4,35 m Further technical details: - longitudinal travel of machine table approximately 500mm - cross travel of machine table approximately 200mm - working height 350mm (non-adjustable) Cedpfxou Ngybe Apashd - distance column / table 0 - 200mm Equipment: - oil tank Ø 300 x 600mm - control panel i.D. *

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Codpfxe Ahyk Ie Apaohd Colour: Silvergrey RAL 7001 Weight: Approx. 67 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Suitable for both water and oil media Temperature range max.: Water: 90 °C Oil: 150 °C Heating capacity: Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Cooling capacity: 45 kW at 90 °C Pump capacity: Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Vacuum mode: max. 8 m H₂O Tank capacity: Min. 16 litres, max. 20 litres Connections: Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread

Condition: used, diameter div. number 23x Chsdpfx Ao Ahkg Tjpaod tool adaptor VDI 25

Condition: ready for operation (used), For sale: SHAANXI MACHINE TOOL WORKS M1432A universal cylindrical grinder, 1000 mm center distance. Technical specifications: Manufacturer: Shaanxi Machine Tool Works Type/Model: M1432A Center distance: 1000 mm Codoz Hu Dljpfx Apaohd Max. grinding diameter: 320 mm Center height: 180 mm External and internal grinding Power supply: 380 V / 3 phases / 50 Hz Connected power: 8 kVA Protection: 35 A Machine number: 177 Weight: approx. 5300 kg Operational. Ready for use. The price listed in the advertisement is the net price, to which VAT must be added. The machine can be viewed in Starachowice at ul. Kwiatkowskiego 13. Contact by phone from 7:00 AM to 3:00 PM.

Condition: good (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,600 rpm, controller model: DECKEL Contour 3, TECHNICAL DETAILS X-axis travel: 400 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Table length: 700 mm Table width: 460 mm Table load capacity: 350 kg Cjdpfs Afxabex Apaehd Spindle speed: 40–3,600 rpm Tool interface: SK 40 MACHINE DETAILS Control system: DECKEL Contour 3 EQUIPMENT Automatic tool changer

Year of construction: 2018, condition: ready for operation (used), functionality: fully functional, Tool-temp TT-137 Tool Tempering Unit, 2018, heating: 12 kW, temperature: 140°C Chjdpfx Aezab S Hepasd Stock: 3 units

Condition: used, diameter div. Csdpfx Ape Ahkgpoaohd number 28x tool adaptor SK 40

Condition: used, diameter div. number 20x tool adaptor HSK-A 63 Cjdpfxj Ahkg Es Apashd

Condition: used, diameter div. number 30x tool adaptor HSK-A 63 Chodpfx Apo Ahkf Isaod

Condition: used, diameter div. number 30x Chodpfo Ahkg Nex Apasd tool adaptor HSK-A 63