Used Honing Machine for sale (84,107)

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25653, Equipped with: -Automatic Central Lubrication System -Machine Guard -Indramat - MTX and Sercos CNC Control Itsdpfx Agew Iquyszer -The standard machine is equipped with CNC-control make Indramat - MTX and SERCOS-interface -Tool Dressing (Automatic dressing cycle of the dressing master and honing wheel tip diameter by a diamond coated dressing roll. The dressing cycle of workpieces can be pre-selected) -Electronic Indexing Unit -Operator and Maintenance Manual -All Electrical Drawings -PLC Language in English -Software and Hardware for Remote Diagnosis -High Precision Control of the Stock Allowance Material -Manual Loading on Spindle for Prototypes -Software for Infeed Optimized Cycle Type Reduction (Adaptive Honing) -Software for Vario Speed Dressing -Software for Calibration of Master Gears -Software for Timing Gears (including additional sensor for the hole of 4mm) -Software for Shortening of Workpiece Change-Over Time -Clamping Cylinder -RITTAL Cooling Unit -Lighting for Working Area -Installation of Vibration Detecting Sensors -Coolant Unit -Electrostatic Oil Mist Exhauster IFS With Rigid Piping -Internal Automation -Pallet Ring Conveyor System FlexLink (L-form shape see approved layout) -Parallel - Double Gripper -Pick and Placer Between Pallet Conveyor and Internal Loader -Extended Loading Length of the Pick and Placer Specifications: Workpiece: -Part Diameter: 20-150 mm -Maximum Face Width: 70 mm -Part Weight: 20 kg -Number of Teeth: 6-150 -Module: 1-5 mm Workpiece Spindle: -Maximum Speed: 6000 1/min -Installed Power: Approx. 25 kW Tool: -OD of Honing Wheel: 270 mm -Widths of Honing Wheel: 20-70 mm -Honing Wheel Material: Ceramics Tool Spindle: -Maximum Speed: 2000 1/min -Installed Power: Approx. 25 kW Machine: -Total Connected Load, Approx: 70 kVA -Floor Space (w x l x H): -Total Weight, Approx: 11 Ton -Bosch Rexroth MTX Control CML 85 Longitudinal Slide, Z-Axis: -Linear Drive -Drive Torque: 3,700 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 400 mm Cross Slide, X-Axis: -Linear Drive -Drive Momentum: 2,150 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 1050 mm Swiveling Axis, W-Axis: -AC-Servo Drive: 10,000 1/min -Setable Gear Transmission: i=5000:1 -Swiveling Angle: -90 Degrees / +16 Degrees Workpiece Spindle, C-Axis: -Direct Drive, Maximum RPM: 7,000 1/min -Drive Power: 30 kW -Drive Torque: 112 Nm -Digital Measuring System Tool Spindle, B-Axis: -Direct Drive (hollow spindle drive), Maximum RPM: 2000 1/min -Drive Power: 30 kW -Drive Torque: 150 Nm -Digital Measuring System

Condition: ready for operation (used), Speed: 300/450/650/800 rpm Isdpfox Imphex Agzotr Diameter range: 3 mm 66 mm

Condition: ready for operation (used), Year of construction: 2010, Main Drive Number of axis 3 Isdox D Rinopfx Agzetr This 3-axis GEHRING L2-630 vertical honing machine was manufactured in 2010. It features a 6-station rotary table, two honing stations, two measuring stations, and a brushing station. Fully automated with a robot feeder, consider the opportunity to buy this GEHRING L2-630 vertical honing machine. Contact us for more information. Application Types Honing

Condition: used, Year of construction: 2000, honing diameter 80 / 152 mm stroke 210 mm throat 210 mm total power requirement 4,1 kVA weight of the machine ca. 1,1 t dimensions of the machine ca. 1,22 x 0,87 x 2,44 m Kennametal Extrude Hone Machine , Model 77C, Year 2000 Iedpox Dxxdsfx Agzjtr Abrasive Flow Machining for pressure flow lapping, or flow grinding of mech. parts. Polishing and deburring or surface modifications of complex components are carried out by means of a viscous abrasive (pressure flow lapping medium) and pressure.

Condition: ready for operation (used), Year of construction: 2008, Immediately available ex-stock: Vertical honing machine Itjdpfox Icdzox Agzsr Manufacturer: Delapena Model: 276/403 Honing diameter: 25.4 – 368.3 mm Honing length up to max. 812 mm Infinitely variable spindle speed: 40 – 250 rpm Infinitely variable stroke speed up to 18 m/min Complete set of accessories Weight: 3 tons Offered at a price of EUR 6,000.— plus VAT ex location

Condition: used, Manufacturer: PRÄWEMA, Model: 205HS2-2 / Synchrofine, Year of manufacture: 2008, Machine No.: 077238, Control system: Rexroth Indramat, Type: System 200 BTV20, including hand-held control terminal, Workpiece diameter: 95 mm, Maximum workpiece length: 59 mm, Maximum spindle speed: C-axis (workpiece): 6,000 rpm / 7,000 rpm, B-axis (tool): 2,000 rpm, Maximum feed rates Z/X: 60 m/min, Honing head part no.: 416101804-8, Year: 2008, Serial no.: 221, Machine bed made of granite, Manufacturer: Eckbert Reitz, Type: HFSL204HS2, Year: 2008, Workpiece automation, Surface quality inspection unit, Oil drip tray, Pump: Brinkmann, Type: TH160/350-001, Operating hours (as of 25/11/2018): 69,518 Itedpfsx Ahc Nox Agzer +++ Note: This item is part of an online auction! +++

Condition: good (used), Year of construction: 2001, Equipped with: Power Stock Fanuc 5-Axis CNC Control 160M 400mm Honing Wheel X Axis Pulse Generator Coolant System w/Twin Filters Magnetic Chip Separator Honing Tool Set up for Last Job is Still in Machine Internal Diameter of Honing Tool on Machine is 14" Work Light Power Door Itodpfxsrualpo Agzjr Auto Dress 5-Part Program Instruction Book for 16M Control Instruction Book for Set-Up and Operation Specifications: Maximum Outer Diameter: 250 (350) Minimum Outer Diameter: 30 Maximum Overall Length: 400mm Maximum Tooth Width: 45mm Module: 1.0-3.0 Cross Feed Device(Z Axis): 430mm Max. Travel Honing Wheel Cutting Feed Device(X Axis): 370 Max. Travel Honing Wheel Swing Device(C Axis): Swing Angle: +30 Degress Honing Wheel Rotation Drive Device(A Axis): Honing Wheel Spindle Speed R/Min: 500 Honing Wheel Outer Dia.: 300 (400) Maximum Honing Wheel Width: 50mm Crowning Device (Y Axis): Maximum Rocking Angle: 1.6 Degrees Motor Types: Z-Axis Drive Motor: 1.8Kw X-Axis Drive Motor: 1.8Kw Y-Axis Drive Motor: 0.7Kw C-Axis Drive Motor: 1.8Kw A-Axis Drive Motor: 2.2/3.7Kw Maximum Distance Between Centers: 600mm Center Height: 1,100mm Floor Space: 2,170W X 2,800D X 2,100H Mass Of Machine: 4,500Kg

Condition: used, Spindle speeds: 200 - 3000 rpm Iedpjxy Ikzofx Agzstr Stroke rates: 60 - 500 strokes/min Stroke length range: 6.0 - 170 mm Weight: 800 kg All information provided without guarantee.

Condition: ready for operation (used), Year of construction: 2013, Main Drive Number of axis 3 Main Drive Number of axis 3 This 3-axis GEHRING L2-630 was manufactured in 2013. It features a 6-station rotary table, including 2 honing stations, 2 measuring stations, and 1 brushing station, all automated. Ideal for precision honing applications. Contact us for more information. Application Types Ijdex D Rihjpfx Agzotr Honing

Condition: good (used), Gehring Honing Machine E 630-45 - Honing diameter: 3 - 45 mm - Maximum honing length: 350 mm - Number of honing spindles: 1 - Stroke length: 2 - 630 mm - Stroke drive: electric - Stroke speed: 1 - 40 m/min - Infinitely variable stroke control - Spindle speed: 150 - 6000 rpm Itsdox Emyuopfx Agzjr Good condition, fully functional, can be inspected and tested under power on site. Worldwide shipping available. Inspection: In order to avoid misunderstandings, I would like to point out that the item can be inspected and tested under power prior to purchase. Please ask any questions before buying to avoid uncertainties. For general questions or to arrange a viewing appointment, I am available at the telephone number provided below or above at any time. Subject to prior sale and errors in the description. VAT is shown separately on my invoices. Shipping via freight carrier.

Condition: used, Year of construction: 2005, Type Honanlage Control Nagel In our opinion, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Ijdpfjxwdxisx Agzstr Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), Various new honing stones, horns, guide shoes and accessories Sunnen. Itedpfx Agoigvraezjr Used honing stones Sunnen, PG800-EM

Condition: ready for operation (used), Year of construction: 1980, Working diameter min./max.: 25mm/250mm, max. honing length: 800mm, speed: 50U-250U/min, vertical stroke: 40mm-1000mm, stroke speed: 12m/min, throat depth: 870mm, tool holder: MK4, table: fixed table. Machine dimensions X/Y/Z: approx. 2650mm/1400mm/3000mm, weight: approx. 2000kg. Including coolant system with 100l tank. Documentation available. On-site inspection is possible. Expected to be available from December 2025. Iedpfx Aswt Tk Aegzetr

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 203214, workpiece weight (max.): 2 kg, spindle speed (max.): 3,700 rpm, workpiece diameter (max.): 150 mm, empty load weight: 1,579 kg, TECHNICAL DETAILS Workpiece diameter: 8 to 150 mm Max. workpiece weight: 2 kg Spindle speed range: 250 to 3,700 rpm Standard speed range: 20 to 1,000 rpm Stroke speed range: 33 to 500 strokes/min Tools Krossgrinding tools: 5.46 to 32 mm TurboHone tools: 3.81 to 32 mm Connecting rod tools: 53.8 to 63.8 mm Larger tools: 25.4 to 101.6 mm MACHINE DETAILS Itodpfexxkfxjx Agzor Coolant system Pump motor power: 0.18 kW Coolant pump: 5.6 l/min Coolant capacity: 132 l Air pressure requirements: 566 l/min at 4.48 bar Recommended air pressure: 5.52 bar Temperature range: 0 to 35 °C Noise emissions: < 71 dB (A) continuous, < 75 dB (A) peak Dimensions & Weight Dimensions (L x W x H): 2,946 x 2,971 x 1,829 mm Net weight: 1,579 kg Required footprint thickness: Minimum 150 mm EQUIPMENT Automatic setup (spindle speed, stroke speed, stroke length, feed rate, spark-out) Automatic finish machining Machine operating modes: Automatic, Manual Series production Single-item production Optional clamping

Condition: ready for operation (used), Year of construction: 2005, General Data Measurements width 2350 Measurements depth 3150 mm Measurements height 2180 mm Machine weight 10500 kg Control Unit Brand SIEMENS Model Sinumerik 840 D Main Drive Number of axis 9 Ijdpfex D Sqyex Agzotr This 9-axis FASSLER HMX 400 horizontal honing machine was manufactured in 2005. It features a comprehensive control system with Sinumerik 840 D, ensuring precision and ease of use. With a honing stone diameter of 400 mm and a machinable workpiece diameter up to 350 mm, it is ideal for both external and internal honing. Consider the opportunity to buy this FASSLER HMX 400 horizontal honing machine. Contact us for more information about this machine. Application Types Honing

Condition: used, Year of construction: 1977, Technical details: honing diameter: 125 mm stroke: 500 mm throat: - mm grinding spindle speed: 26-1200 (12Steps) U/min honing diameter: 30 (min.) mm Itodpfx Ajw Rv Taogzsr honing diameter: 165 (max.) mm table adjustment:: 800/150 (max.) mm table surface area: 500 x 1000 cm total power requirement: 4,22 kW Weight approx.: 0,15 t dimension machine xH: 1,30 x 1,20 x 2,70 m There is a movable table that moves lengthwise and crosswise. *

Condition: used, Year of construction: 1999, ❗Honing Machine / Cross-Honing Machine Sunnen Eclipse EC-3500-CGM-27 ❗ Year of manufacture: 1999 Machine No.: 3X1-1926 Condition: Used, untested Delivery terms: Free loaded on truck – unpacked Location: 82216 Maisach Availability: Immediate – upon agreement Payment terms: Advance payment – by bank transfer Internal no.: PHY1 Ijdpfxsxv Dmqj Agzstr Technical specifications: Manual stroke diameter range: 1.5 – 165 mm Automatic stroke diameter range: 1.5 – 102 mm Stroke length range: 6.0 – 170 mm Spindle speeds: 200 – 3000 rpm Stroke rates: 60 – 500 strokes/min Spindle motor power: 4.1 kW Stroke motor power: 1.1 kW Compressed air requirement: 5.5 bar 400 V / 50 Hz Spindle bearings renewed in 2015 Frequency converter replaced in 2024 Spindle motor fan replaced in 2025 Further technical data – see PDF attachment Notes: Stop fingers missing (see photo) Operating hour counter defective Tool type selector switch defective Light curtain defective (bypassed in the control cabinet) Despite the above-mentioned defects, the machine was in regular operation at a specialist company. Scope of delivery: Available documentation No additional accessories Dimensions & weight: Installation dimensions (L x W x H) approx.: 1600 x 1200 x 1900 mm Weight approx.: 900 kg If you have any questions or wish to arrange a viewing, please do not hesitate to contact us. ⚠️Also take a look at our other listings.⚠️ Additional notes: We expressly recommend collection by direct shipment (haulage company). The item is sold without any warranty of any kind. Technical specifications provided without obligation. Subject to prior sale. ❗Sale exclusively to business customers❗

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, spindle speed (min.): 250 rpm, spindle speed (max.): 2,500 rpm, total height: 1,600 mm, total width: 1,200 mm, total length: 1,450 mm, lifting speed: 130 mm/s, hone diameter: 50 mm, overall weight: 830 kg, stroke length: 160 mm, power: 0.75 kW (1.02 HP), This easy-to-use manual honing machine is characterized by high stability and precision, and can be adjusted via stepless electronic speed control. The honing diameter ranges from 3mm to 50mm, with lengths up to 160mm. Easy to operate and simple to adjust. Due to its compact footprint, it is highly flexible in terms of placement. Itsdpfx Ajw Upzxjgzor

Condition: used, machine/vehicle number: 3254, used honing machine make NAGEL type VS 8 - 35 max. stroke = 350 mm Itedokt Nnvopfx Agzjr throat = 250 mm Distance table - spindle = 800 mm Bore diameter = 24 - 150 mm

Condition: used, honing diameter 165 mm stroke 120 mm centre height 100 mm total power requirement 1,5 kW weight of the machine ca. 1 t We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : SUNNEN (USA) Horizontal Automatic Honing Machine model MBC 1804 G year Serial no 1K1-190075 _____ Honing range – Ø with gauge control 1,5 – 51 mm with automatic stroke 1,5 – 95 mm with manual stroke 1,5 – 165 mm Workpiece honing length max. approx. 400 mm Workpiece honing lengthe with gauge control 254 mm 12 spindle speeds 200 – 2.500 rpm 5 stroke rates 80 – 310 stroke/min Length range of automatic stroke 6 – 120 mm Power of spindle 0,75 kW - 380 V - 50 Hz Total drive appro. 1,5 kW - 380 V - 50 Hz Accessories / Special Features • Automatic Working Cycle with aut. mechanical stroke, aut. hydr.-mechanic Honingtool-feed and aut. cycle stop when the nominal size is reached • Elektro-mechanical gauge control with a probe in the nominal diameter-size mounted opposite to the main spindle, which initiates the cycle stop when the nominal diameter is reached. • Steplessly adjustable honing tool pressure feed • Footswitch for manual operating • Built-in honing oil supply system • Manuals. Unfortunately there is no tooling with the machine Condition : very good, universal machine for all sorts of honing tasks ! Soon : Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading Iodew U U Iqopfx Agzjtr

Condition: excellent (used), Sunnen GH210 Horizontal Hone Year 2010 Max Stroke 8000mm, Spindle Speed:0 - 300 rpm Maximum Spindle Power: 40 Hp (29.83 kW) Ijdpfx Aow U Uh Degzjtr Maximum Stroker Power: 18 Hp (13.42 kW) Stroke Speed Range: 0 – 100 ft/min (0 – 30.5 m/min) I.D. Range: 2 – 24 inches (50.8 – 609.6 mm) O.D. Range: 26 inches standard (660.4 mm) Maximum Part Weight: 8000 kg Approximate Machine Weight: 12,066 kg 400 VAC 50 Hz, 3-Phase (85 A) Siemens Simatic Control,

Condition: used, Technical details: honing diameter: Ø 400 mm stroke: 600 mm throat: 390 mm table-size: 1.550 x 780 mm table surface area: 1.400 x 480 mm table:: fest total power requirement: 4,1 kW Weight approx.: 2,8 t dimension machine xH: 2,0 x 1,2 x 4,35 m Further technical details: - longitudinal travel of machine table approximately 500mm - cross travel of machine table approximately 200mm - working height 350mm (non-adjustable) - distance column / table 0 - 200mm Equipment: - oil tank Ø 300 x 600mm - control panel i.D. * Itodpfxsu Ngybs Agzer

Year of construction: 2002, condition: good (used), Make: PLEIGER Type: HF 75 / 115 S 30 Control: Siemens Simatic panel Year: 2002 Stroke speed slide step 1 : 4 - 20 M/Min Stroke speed slide step 2 :0,3 - 3 M/Min Rotation chuck step 1 : 300 Rpm and 320 Nm Rotation chuck step 2: 100 Rpm and 1290 Nm Horizontal deep hole honing machine Horizontal tube honing machine Horizontal cylinder honing machine Horizontal pipe honing machine Fine finishing of cylindrical bores Itedpfskvnc Sox Agzjr Specifications Metric US Standard Drilling depth 11500 mm Power on spindle 55 kW Speeds / ranges 300 Rpm Dimensions (Estimate) Length 25000 mm Width 2000 mm Height 2000 mm Weight 30000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1975, honing diameter 250 mm stroke 99999 mm throat 99999 mm Ijdpfx Aswlvkpegzetr Seems to be manzfactured by NAGEL Hondurchmesser app YOM app because of no plate

Condition: used, honing diameter 99999 mm Iedpfx Agsv Twgiozotr stroke 99999 mm throat 99999 mm Used panel of a NAGEL MSU2 No warranty