Used honing machines for sale (102)

Condition: used, Delapena Speedhone Model: ‘E’ Electronic (M) Diameter Range: 1.143-79.375mm With lots of tooling Nsdpfx Alszlg Dqjaold Dimensions: 1200 x 1200 x 1600mm high Weight: 410 KGS

Condition: ready for operation (used), Year of construction: 2007, operating hours: 40,522 h, controller manufacturer: MAZATROL, controller model: Matrix, total height: 3,400 mm, overall weight: 17,000 kg, This 5 axis Mazak Variaxis 630-5X was manufactured in 2007. A universal machining centre featuring a 2-pallet changer, 80-tool magazine, and a Renishaw probe. It supports a 70 bar internal cooling system, enhancing operational efficiency. Ideal for those looking to enhance their machining capabilities. Contact us for more information about this machine. • Spindle speed: 12.000 rpm • Known defects: Normal signs of use and wear • 80-tool magazine Nledpfx Alox D Ewaeaod • Renishaw probe • 70 bar internal cooling Additional equipment • 2-pallet changer Dimensions Machine Depth 5800 mm

Condition: ready for operation (used), Year of construction: 2021, operating hours: 11,514 h, spindle speed (max.): 18,000 rpm, overall weight: 20,000 kg, travel distance X-axis: 670 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, number of axes: 5, This 5-axis POSmill H800U was manufactured in 2021. It features an X-axis travel of 670 mm, Y-axis travel of 820 mm, and Z-axis travel of 600 mm. The machine is equipped with a Heidenhain TNC 640 control unit and has a maximum spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the POSmill H800U universal machining centre we have for sale. Contact us for further details. Nsdsznktuopfx Alajld - Coolant Supply: 40 bar- Nominal Power: 90 kVA- Input Voltage: 400 V, 50 Hz (3-Phase)- Full Load Current: 125 A- Max. Current Load: 200 A- Short-Circuit Strength: 25 kA- Included Equipment: Documentation/Manual, Chip Conveyor, Coolant System & Filtration Unit- Condition: Very good, fully functional; completely inspected by manufacturer at the end of 2025 (receipts available)- Spindle Hours: 11,514 h- Machine Power-On Hours: 20,954 h- Control Power-On Hours: 22,231 h- Usage History: Exclusively soft-annealed tool steels (no hard or dry machining)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,243 h, spindle speed (max.): 18,000 rpm, travel distance X-axis: 750 mm, number of axes: 5, This 5-axis DMG MORI DMU 75 monoBLOCK was manufactured in 2017. It features a Siemens SINUMERIK 840 D control system and a high-pressure pump for internal coolant supply at 20 bar. The machine includes a 3D measuring probe from Heidenhain and has 60 magazine positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 75 monoBLOCK universal machining centre we have for sale. Contact us for further details. Nledjzdzmwjpfx Alaed • Measuring probe: 3D measuring probe from Heidenhain, TS649, HSK mount • High-pressure pump for internal coolant supply: 20 bar • Siemens control: SINUMERIK 840D Solutionline (Operate) • CELOS • Magazine positions: 60 • Chip conveyor included • Coolant tank with treatment and cooling system included Technical Specification Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 2,500 rpm, total height: 8,500 mm, total width: 10,650 mm, overall weight: 77,000 kg, travel distance X-axis: 13,500 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 5,000 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle motor power: 37,000 W, product length (max.): 1,500 mm, table load: 10,000 kg, tool weight: 20,000 g, number of slots in tool magazine: 60, number of axes: 3, Universal machining centre manufactured in 2008. This Correa SUPRA 135 features an impressive X-axis travel of 13,500 mm, Y-axis travel of 1,500 mm, and Z-axis travel of 5,000 mm. It includes a robust fixed table with dimensions of 3,500 x 2,500 mm and a maximum load capacity of 10,000 kg. If you are looking to get high-quality machining capabilities, consider the Correa SUPRA 135 machine we have for sale. Contact us for further details. Technical Specification Taper Size ISO 50 Nsdpeznagwsfx Alaeld

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 42,000 rpm, overall weight: 6,500 kg, travel distance X-axis: 760 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 300 mm, number of axes: 3, This Röders RFM760-099 Vertical Machining Center was manufactured in the year 2000. The machine has a spindle speed of 42000 rpm. Nledpfezmtqyox Alaed Machine Benefits Technical Machine Benefits • Tool shrink unit • Dust extraction (graphite) • Tool holders • Software: RMS6V3.15 (211) • Working Area: 760 x 550 x 300 mm • Table Size: 860 x 550 mm • Spindle: Fischer MFW-1230/42 spindle (42,000 rpm, new as of December 2022) • Spindle Taper/Mount: ISO HSK E40 • Tool Changer: 25-position tool changer • Laser Tool Measurement: Integrated for length and diameter • Workpiece Measurement: IR 3D probe • Extraction System: Dust extraction (graphite) • Cooling System: Cooling unit and spray cooling for tool/workpiece • Shrink-Fitter: Röders tool shrink-fitter • Chuck: Fixed chuck (new in 2022) • Included Accessories: Milling chuck, consumables, tool holders, and manual service tools • Machine Status: In working order; EROWA clamping system and HD vise have been removed and are excluded from the deal Dimensions Machine Depth 2500 mm

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,215 h, travel distance X-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, spindle speed (max.): 20,000 rpm, spindle motor power: 35,000 W, number of axes: 5, This 5 axis MTcut UDS80H-5A was manufactured in 2019. It features a 20,000 rpm spindle, 120 Nm torque, and 35 kW drive power. Equipped with a HSK63 tool holder, 96-position tool changer, and a Kessler rotary tilting table with an 800 mm diameter. Includes Heidenhain TNC 640 control, 15" TFT screen, and Ethernet connectivity. Ideal for precision machining with its Heidenhain glass scales and BLUM laser tool measurement. Contact us for more information about this machine. • Operating hours: Control unit 6,904 h; Machine 5,480 h; Program runtime 2,215 h • Spindle: 120 Nm torque, separate spindle cooling for constant temperature • Tool interface: HSK63 with blow-out function • Rotary table: 800 mm diameter; Kessler rotary tilting table with 2 A-axes and 1 C-axis, direct-drive torque motors • Feedback: Heidenhain glass scales in all 5 axes • Tool changer: 96 positions with double-arm gripper • Control: 15" color TFT screen • Connectivity: Ethernet interface, 2x USB ports • Control functions: Plain text programming; short block processing time; create new program while another is running; proven Heidenhain machining cycles • Electronic handwheel • CE certified Additional equipment • Chip conveyor • Coolant system • Internal high-pressure coolant 50 bar with belt filter system • Coolant and compressed air gun • BLUM laser tool measurement • Heidenhain TS460 workpiece probe system for HSK63 with radio and infrared transmission • Heidenhain KinematicsOpt including Heidenhain calibration sphere KKH 250 • Extraction system: Filtermist FX4002, air volume 1,250 m³/h • Rotating viewing window • Work area light • Tool package Technical Specification Nledpjx D In Usfx Alasd Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 3,000 rpm, total height: 1,950 mm, total width: 2,250 mm, overall weight: 1,700 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 350 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 320, spindle motor power: 5,500 W, product length (max.): 2,700 mm, table load: 200 kg, number of axes: 3, This 3-axis Avia FNX30NC was manufactured in 2012. It features a maximum spindle speed of 3000 rpm and can accommodate tools with a maximum diameter of 125 mm and weight of 7 kg. The machine includes a substantial set of tooling stored on a blue multi-tier tool rack, a machine vice, and a protective workspace enclosure. If you are looking to get high-quality machining capabilities, consider the Avia FNX30NC universal machining centre we have for sale. Contact us for further details. - Total Power: 9.0 kW- Supply Voltage: 3x 400 V AC- Control Voltage: 24 V DC- Voltage for Machine Lamps: 24 V DC- Frequency: 50 Hz- Rated Current: 20 A- Fixed Angle Table Clamping Area: 315 x 710 mm- Fixed Angle Table T-Slots: 5 / 14 x 63 mm- Fixed Angle Table Weight: 95 kg- Fixed Angle Table Max Load: 200 kg- Vertical Console Table Clamping Area: 235 x 350 mm- Vertical Console Table T-Slots: 2 / 14 x (63/63) mm- Tool Holder Taper: DIN 2080-40 (ISO 40)- Spindle Speed Range: 50 - 3000 rpm (infinitely variable)- Quill Sleeve Bore Diameter: Ø56H7 mm- Vertical Head Manual Quill Travel: 80 mm- Vertical Head Swivel Angle: ±45°- Vertical Head Weight: 85 kg- Feed Rate X, Y: up to 5000 mm/min (infinitely variable)- Feed Rate Z: up to 2500 mm/min (infinitely variable)- Rapid Traverse X, Y: 6000 mm/min- Rapid Traverse Z: 3000 mm/min- Axis Motor Torque X, Y: 4.5 Nm- Axis Motor Torque Z: 6.2 Nm- Coolant Pump Motor: 0.2 kW- Enclosed Accessories / Equipment: Includes a substantial set of tooling stored on a blue multi-tier tool rack, machine vice, chip and splash enclosure, coolant system, and operating manual. Nledpfszmh Aqjx Alasd Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2003, operating hours: 13,028 h, spindle speed (max.): 9,000 rpm, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, number of axes: 5, This 5-axis DECKEL MAHO DMU 50T was manufactured in 2003. It features a 3+2 axis setup with CNC-driven linear axes and a manual swivelling rotary table for enhanced versatility. The machine comes equipped with tools and an attached tool list holder for convenience. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 50T universal machining centre we have for sale. Contact us for further details. Nlsdjzmhwzopfx Alasd - Axes: 5-axis (Typically configured as a 3+2 axis setup featuring 3 CNC-driven linear axes X/Y/Z and a manual/handwheel-operated swivelling rotary table for the B and C axes)- Included Equipment: Tools included, attached tool list holder on the enclosure shell, electronic handwheel/control pendant inside cabinet

Condition: ready for operation (used), Year of construction: 2006, operating hours: 43,686 h, total height: 2,300 mm, overall weight: 7,000 kg, table width: 500 mm, table length: 870 mm, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 700 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D Powerline, working width: 500 mm, cutting length (max.): 870 mm, laser power: 100 W, number of axes: 3, This 3-axis DMG Sauer Lasertec80 FineCutting was manufactured in 2006. It features an X-axis travel of 800 mm, Y-axis travel of 500 mm, and Z-axis travel of 700 mm. The machine is equipped with a Siemens SINUMERIK 840D Powerline control and a high-precision cross table with linear drives. If you are looking to get high-quality laser fine cutting capabilities, consider the DMG Sauer Lasertec80 FineCutting machine we have for sale. Contact us for further details. Technical Data • Machine Type: Laser Fine Cutting, Laser Drilling and Laser Welding Machine • Control: Siemens SINUMERIK 840D Powerline • Table Type: Cross Table with Linear Drives • Maximum Sheet Size: 870 × 500 mm • Vertical Axis with Linear Guideways and Ball Screw Drive • Machine Base: Mineral Cast Construction • Laser Type: Lasag KLS246 Nd:YAG Laser • Average Laser Power: 100 W • Focal Length: 70 mm • Machine Dimensions (L × W × H): 6,000 × 5,000 × 2,300 mm Nljdpszl T R Defx Alaed • Machine Length: 6,000 mm (including aggregates, operation and maintenance space) • Machine Width: 5,000 mm (including aggregates, operation and maintenance space) • Operating Hours: 43,686 h • Laser Unit Condition: C Module Defect Additional Equipment • Precitec Processing Head • Automatic Height Control • Keller Dust Extraction System • Automatic Filter Cleaning System • KKT Kraus Water-Air Cooling Unit • Programmable Process Gas Pressure • Completely Overhauled Laser Cavity • New Pulse Lamp • Precitec Laser Head Mounting Tools Machine Benefits • Suitable for Laser Fine Cutting, Laser Drilling and Laser Welding • High-Precision Cross Table with Linear Drives • Automatic Height Control for Precise Processing • Comprehensive Maintenance Logbook Available • All Repairs and Component Replacements Documented • Inspection on Site Possible • Repair of the Laser Unit PossibleRepair will only be carried out if requested. Please note that the selling price may vary accordingly.

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 18,000 rpm, travel distance X-axis: 1,020 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 805 mm, controller manufacturer: FANUC, controller model: 31i-b5, spindle motor power: 22,000 W, table load: 800 kg, number of slots in tool magazine: 40, number of axes: 5, This 5-axis DN SOLUTIONS DVF 8000 was manufactured in 2022. It features impressive X-axis travel of 1,020 mm, Y-axis travel of 850 mm, and Z-axis travel of 805 mm. The machine includes a maximum workpiece diameter of 1,000 mm and a spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the DN SOLUTIONS DVF 8000 universal machining centre we have for sale. Contact us for further details. • 15" color touchscreen display • CE certified • Metric configuration • Power supply: 3-phase AC 380V / 50Hz • Number of axes: 5 (X, Y, Z, A, C) • Simultaneous 5-axis machining • Absolute feedback system (absolute pulse coder on A- and C-axis) • Table diameter: 800 mm • Maximum workpiece diameter: 1,000 mm • Maximum workpiece height: 630 mm • Spindle motor power: 22 / 18.5 kW Nlsdpfozlg Ngsx Alajd • Spindle taper: HSK-A63 • Tool holder type: HSK63A • Flood coolant pump: 2.5 kW / 0.44 MPa / 100 L/min • Through-spindle coolant: 4.0 kW / 2.0 MPa (20 bar) • Tool load monitoring • Portable MPG handwheel • Automatic power off • Program storage: 10,240 m (4 MB) • 1,000 program capacity • 400 tool offset pairs • 48 work coordinate systems • Large capacity memory: 2 GB • Data server & memory card: 2 GB • Embedded Ethernet • iHMI easy operating system (EZI & Machining Cycle) • DSQ1 (AICC II – 200 blocks) Additional equipment • Hinged belt chip conveyor (rear side) • Cyclone filter system • Renishaw probe ready (RMI-Q) + software • External power transformer • Electrical line filter • Machine lifting hooks

Condition: ready for operation (used), Year of construction: 2003, operating hours: 30,195 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 1,080 mm, travel distance Y-axis: 635 mm, travel distance Z-axis: 710 mm, controller manufacturer: HEIDENHAIN, controller model: Millplus IT, number of slots in tool magazine: 32, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 100T was manufactured in 2003. It features impressive travels of 1,080 mm in the X-axis, 635 mm in the Y-axis, and 710 mm in the Z-axis. The machine includes a fully refurbished Nikken CNC rotary tilting table and an Erowa Robot Easy automation system with 12 pallet stations. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 100T universal machining centre we have for sale. Contact us for further details. • Axes: 5-axis (X, Y, Z + A, B) • Condition note: Spindle collided with workpiece and is currently seized. Advised that it can be rebuilt/reinstalled by a specialized service company; estimated parts cost approx. €7,000. Additional equipment Nlsdezlgxuspfx Alasd • Automation: Erowa Robot Easy system with 12 pallet stations • Workholding: Erowa zero-point clamping system (extensive set) • Rotary/tilting table: Nikken CNC rotary tilting table (fully refurbished in 2016) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2014, operating hours: 20,030 h, spindle speed (max.): 18,000 rpm, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 HSCI, spindle motor power: 23,000 W, table load: 1,200 kg, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DECKEL MAHO DMF 260/11 was manufactured in 2014. It features an impressive X-axis travel of 2600 mm, Y-axis travel of 1100 mm, and Z-axis travel of 900 mm. The machine is equipped with a vertical motor spindle with a spindle speed range of 20 – 18000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMF 260/11 universal machining centre. Contact us for further details. • Control interface: Heidenhain ERGOline, 19" screen • Rapid traverse: 40 m/min; Acceleration: 4 m/s² • Main spindle: Vertical motor spindle power 23 / 5 / 13.5 kW (25 / 100% ED) • Tool magazine: 30 tools; chain magazine with double gripper; chip-to-chip 9 s • Table: 3200 x 1100 mm • Rotary table integrated: 1050 mm diameter • Clamping: Hydraulic • Measuring system: Direct measuring systems • Machine design: Full enclosure with coolant tank; 2 rotating viewing windows • Air supply: Sealing air for linear measuring systems • Through-spindle air: Selectable via M-function • Operating mode: Process monitoring in production • Language: German / English screen texts • Workpiece clamping release: Automatic mode enable • Condition/Service history: • New spindle and new guideways, completely renewed by DMG (January 2026) • Geometry remeasured and adjusted by DMG (January 2026) • New spindle less than 100 hours Additional equipment • Chip conveyor: Scraper belt type • Touch probe: Heidenhain TS 649 infrared measuring probe • Tool measurement: Blum laser tool measurement system • Kinematic calibration: 3D quickSET • Machine protection: MPC Machine Protection Control • Internal coolant supply: 40 bar / 600 l with paper band filter • Coolant/mist extraction: Oil and emulsion mist extraction system; extraction capacity 2 x 1600 m³/h • Electronic handwheel Nljdey D Ilcopfx Alaod • Coolant flushing gun (included) Technical Specification Taper Size HSK 63

Condition: used, Year of construction: 1965, honing diameter 80 mm stroke 280 mm throat 300 mm total power requirement 6 kW weight of the machine ca. 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features * Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. * Hydraulic infeed of the tool. * Switch-off via timer. * Air measuring device (probably). * Honing oil unit. * Various splash shields, etc. Nedpjt Hwupsfx Alajld Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of honing machines available. Please let us know what you need.

Condition: used, Year of construction: 1984, honing diameter 12 mm stroke 40 mm throat mm Nsdpfx Aot Hwvtelaeld total power requirement 15 kW weight of the machine ca. 5 t dimensions of the machine ca. m 3 spindle honing machine with in process measuring

Condition: used, Year of construction: 1998, honing diameter 90 mm stroke 490 mm throat 400 mm total power requirement 10 kW Nlodpst Hw T Sjfx Alaed weight of the machine ca. 3.500 kg dimensions of the machine ca. m

Condition: used, honing diameter 165 mm stroke 120 mm centre height 100 mm total power requirement 1,5 kW weight of the machine ca. 1 t We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : SUNNEN (USA) Horizontal Automatic Honing Machine model MBC 1804 G year Serial no 1K1-190075 _____ Honing range – Ø with gauge control 1,5 – 51 mm with automatic stroke 1,5 – 95 mm with manual stroke 1,5 – 165 mm Workpiece honing length max. approx. 400 mm Workpiece honing lengthe with gauge control 254 mm 12 spindle speeds 200 – 2.500 rpm 5 stroke rates 80 – 310 stroke/min Length range of automatic stroke 6 – 120 mm Power of spindle 0,75 kW - 380 V - 50 Hz Total drive appro. 1,5 kW - 380 V - 50 Hz Accessories / Special Features Nljdpfew U U Iqox Alasd • Automatic Working Cycle with aut. mechanical stroke, aut. hydr.-mechanic Honingtool-feed and aut. cycle stop when the nominal size is reached • Elektro-mechanical gauge control with a probe in the nominal diameter-size mounted opposite to the main spindle, which initiates the cycle stop when the nominal diameter is reached. • Steplessly adjustable honing tool pressure feed • Footswitch for manual operating • Built-in honing oil supply system • Manuals. Unfortunately there is no tooling with the machine Condition : very good, universal machine for all sorts of honing tasks ! Soon : Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 31.212.003.252, total height: 1,800 mm, total width: 2,000 mm, total length: 2,800 mm, overall weight: 2,750 kg, stroke length: 500 mm, workpiece diameter (max.): 250 mm, power: 3 kW (4.08 HP), For sale is a high-quality Fässler AG D250C gear honing machine, designed for the precise finishing of gears. For decades, Fässler has been recognized as one of the leading specialists in honing technology and is known worldwide for its highest precision and process reliability in gear manufacturing. Njdpezd T Tiofx Alasld The D250C is ideally suited for the machining of spur gears and transmission components in the automotive, mechanical engineering, and drive technology sectors. Thanks to its robust construction, precise CNC control, and proven Fässler technology, it enables excellent surface qualities, reduced noise levels in the gears, and the highest dimensional and geometric accuracy.

Condition: good (used), Working range: 1.9 - 100 mm Spindle speeds, infinitely adjustable in 2 groups: 95 - 3500 rpm Drive motor, gear motor: 380 V, approx. 0.55 kW Nedpfozibvisx Alaold Working height: 1000 mm Space requirement: 1150 x 800 x 1250 mm Weight approx.: 260 kg

Condition: ready for operation (used), Year of construction: 2010, number of axes: 3, This 3-axis GEHRING L2-630 vertical honing machine was manufactured in 2010. It features a 6-station rotary table, two honing stations, two measuring stations, and a brushing station. Fully automated with a robot feeder, consider the opportunity to buy this GEHRING L2-630 vertical honing machine. Contact us for more information. • 6-station rotary table • 2 honing stations Nsdpsx D Rinofx Alasld • 2 measuring stations • 1 brushing station • maximum honing diameter: 12mm Additional equipment • Robot feeder (enables full automation)

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 540 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 700 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 5, This 5-axis DMG Mori Seiki LaserTec 50 was manufactured in 2019. It features a Celos with Siemens 840D sl Operate control, integrated ytterbium cw fiber laser, and a compact design with a 4 m² footprint. Ideal for machining diamond tools with dimensions up to Ø 355 mm and 420 mm in length. If you are looking to get high-quality laser machining capabilities, consider the DMG Mori Seiki LaserTec 50 machine we have for sale. Contact us for more information. • Control: CELOS with Siemens 840D sl Operate; 21.5" ERGOline Control with multi-touch screen • Processes: Laser fine cutting, laser drilling, laser welding • Work capacity: Machining diamond tools up to Ø 355 mm and 420 mm in length • Axes/table: NC swivel rotary table; 5-axis transformation; high-dynamic torque motors in B and C axes • Drives: Linear drives in X/Y with acceleration > 1 g • Laser source: Integrated ytterbium CW fiber laser; 450 W QCW ytterbium fiber laser with 4,500 W pulse peak power and 450 W average power • Processing head: 80 mm focal length; collision switch • Vision: Camera through beam path for fiber laser • Construction: Solid mineral cast base • Footprint: Approx. 4 m² • Condition/usage: ~100 working hours (as new) • Notes: CNC precision laser machine with high-speed processing; highly dynamic and precise Nledpfx Aoyfv Tvelajd Additional equipment • Fanuc robot automation • Keller automatic extraction system • Basement exhaust extraction system

Condition: used, functionality: fully functional, input voltage: 400 V, Equipment: documentation/manual, Precision cross-honing machine Used Sunnen Eclipse EC-3500 CGM-27 Bore diameter – honing range: 1.5 – 165 mm Stroke length – honing length: 6 – 170 mm Spindle speeds: 200 – 3,000 rpm Stroke rates: 60 – 500 strokes Total power requirement – spindle drive: 4.1 kW Stroke motor: 1.1 kW Machine weight: approx. 1200 kg Depth: 1.6 m Width: 1.2 m Height: 1.9 m SICK safety light curtain Oil filtration / filter system for the honing oil is integrated – spare filter cartridges available Horizontal cross-honing machine / honing machine, TYPE EC 3500, and operating manual Documentation/manual, nameplate available An inspection under power is possible after prior appointment. Price on request All technical specifications are subject to typographical errors and omissions. Nlodpfjyx Dv Hsx Alasd Sale exclusively to countries within the EU.

Condition: excellent (used), Horizontal Manual With automatic feeds Honing lenght -406 mm Honing diameter 1.5 - 165 mm Spindle speeds 200- 2500 rpm Misc. accessories MARCELS MASCHINEN AG Nljdpfxszhl Tvs Alasd

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 50/2150, (Please tell us your offer price) Sale only within Europe, incl. Turkey Nedozlxlyopfx Alasld Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 208, workpiece weight (max.): 17 kg, type of input current: AC, spindle speed (min.): 150 rpm, spindle speed (max.): 2,500 rpm, total height: 1,550 mm, total width: 800 mm, total length: 1,450 mm, hone diameter: 50 mm, overall weight: 500 kg, Equipment: rotational speed infinitely variable, For sale is a high-quality Pemamo MDR 140 NC honing machine (year of manufacture 2004) in good and operational condition. The machine is ideally suited for precise internal machining in the micrometer range and has been used reliably. Highlights: • Swiss precision machine (Pemamo) Nledszb Enzjpfx Alaed • Very high accuracy • Ready for operation – demonstration possible • Robust and durable design The machine is immediately ready for use and can be inspected while powered on after prior arrangement. Sold without warranty, ex works. The machine will be delivered without power and compressed air supply. Payment before collection.