Used Sunnen for sale (22)

Year of construction: 2017, Condition: excellent (used), machine/vehicle number: #2T1-1001 , The SHD2400S Skiving & Roller Burnishing machine was used as a beta test machine from May 2017 through May 2019 and is available for sale at a discounted price. The machine is offered with a 3 year warranty at the time of installation. Nolhoh Aywnoccqtswd SHD2400S skiving and roller burnishing machine features: Maximum part length 2 m (6.56 ft.) Spindle Power: 57 kW (76 hp) induction motor Diameter range 50-180 mm (2”-7”) 400 VAC/50 Hz or 460 VAC/60 Hz compatible Machine includes pressure head PH2460001 and SHD8200 Coolant system with filtration Dirty and clean tank capacity 1130 gallons each (2260 gallons total) Optional double wall tank for added leak protection

Condition: used, Year of construction: 1980, Year 1980 Type Präzisionshonmaschine In our opinion, the machine is in good used condition Condition and can be viewed under power by appointment. Accessories, tools and clamping devices shown are only included in the scope Njlhsvdubxsccqtowd of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: good (used), honing diameter 1,5 -160 mm stroke 400 mm centre height 200 mm total power requirement 0,37 kW weight of the machine ca. 0,750 t dimensions of the machine ca. 1,2 x 1,4 x 1,7 m WORKING RANGE -HONING- Stroke max. 170 mm Stroke min. 6 mm Stroke rate max. 60 /min Stroke rate min. 500 /min WORKING RANGE -INTERNAL HONING- Spindle speeds from 200 /min Spindle speeds up to 3000 /min ELECTRICAL CONNECTION DATA Power consumption (total) 4 kW Supply voltage 400 V Mains frequency 50 Hz DIMENSIONS / WEIGHTS Space requirement -left/right- 1200 mm Space requirement -front/rear- 1600 mm Total height 1900 mm Njlhcsv Nq Sqjcqtswd Total weight approx. 750 kg

Condition: excellent (used), operating hours: 751 h, Functionality: fully functional, machine/vehicle number: 1E1-1036, Very few operating hours: 751 hours Complete documentation (assembly, operating, and maintenance instructions) -Diameter range (inner Ø): 1.5 - 165 (manual stroke) 1.5 - 95 (automatic stroke) -Stroke length: Nwjlhccev Tb R Eoqted 6 to 170 mm -Spindle speed: 200 to 3000 rpm (variable) -Spindle motor: 1.5 kW (3.0 HP) -Lift motor: 0.75 kW (1.0 HP) -Year of manufacture: Approx. 2005 -Machine weight: 725 kg -Space requirement: approx. 3.5 m²

Condition: used, Year of construction: 2004, Functionality: fully functional, Well used Sunnen honing machine with Felsomat loading system. Diameter range (INSIDE Ø)¹: Krossgrinding® tools: 5.46 to 32 mm when loaded with CGT tools TurboHone® tools: 3.81 to 32 mm when loaded with MMT tools Connecting rod tools: 53.8 to 63.8 mm when fitted with CRT tools Larger tools: 25.4 to 101.6 mm Workpiece²: 8 to 150 mm Max. Workpiece weight: 2.0 kg Spindle speed range: 250 to 3,700 rpm, adjustable Standard speed: Nsloud Nm Rjhccqtewd High torque in the low speed range: 20 to 1,000 rpm, adjustable Stroke speed range: 33 to 500 H/min, adjustable Coolant system Pump motor: 0.18 kW Coolant pump: 5.6 l/min Coolant capacity: 132 l and 11.2 l/min Coolant requirements: Compressed air requirements: 566 l/min at 4.48 bar, 5.52 bar is recommended Temperature range: 0° to 35° C Floor space requirements: (concrete floor) At least 150 mm thick Machine dimensions: L 2946 mm x W 2971 x H 1829 Color: Pearl grey with pewter grey and burgundy decorative stripes Stand weight: 1,579 kg Noise emissions: < 71 dB (A) continuous load, < 75 dB (A) peak load Special features: Automatic set-up: spindle speed, stroke speed, stroke length, infeed value and sparking Automatic finishing: Standard Machine operating modes Automatic: Manual: Series production Individual production Clamping optional

Condition: used, Year of construction: 1997, workpiece weight (max.): 3,000 kg, clamping length: 3,000 mm, grinding wheel diameter: 800 mm, center height: 500 mm, center height in crank: 1,000 mm, total height: 1,500 mm, I have a lot of Comec Berco Sunnen Az kwik-way machines for sale please write I will reply immediately whatshapp Nwolhcsv Suvljcqted

Condition: used, Functionality: fully functional, Sunnen MBB-1660G Precision Honing Machine. Make - Sunnen Nwslhcsv Sd Nhjcqtod Model - MBB-1660 Job Diameter Range - 1.5 mm to 165 mm Max. Job Length - 406 mm Max. Spindle Speed - 2500 rpm Machine suitable for any material, regular or odd-shaped parts. Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 2011, Precision honing machine SUNNEN Eclipse EC-3500EM-27 S/N: 4S1-1123 1 shelf with partition Nwelhcevym Nmscqtjd 1 lighting structure

Condition: new, Year of construction: 2025, Functionality: fully functional, CCT1600L A-M Pressure tester for cylinder head and block – new machine. Hydraulic tray lifting, motorized tray rotation. Technical details: Nwjlhcjncd Ecscqted Max. cylinder head capacities: Lenght x Width x Height: 1350 x 425 x 300 mm Capacity of stainless steel tank: 500 liter Heating elements: 2 x 4,5 kw Hydraulic tray lifting Motorized tray rotation Hydraulic hoist: 0,75 kw Gear-motor: 0,25 kw Up and down travel time: 600 mm in 10 sec Thermostat: 0-90°C Power supply: 16kva-3x230v-ac-50/60hz Net weight approx: 600 kg Space requirements: Lenght x Width x Height: 2100 x 1050 x 1700 mm If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: excellent (used), Year of construction: 2006, operating hours: 2,148 h, Functionality: fully functional, machine/vehicle number: 1E1-1258, Very few operating hours: 2148 hours Complete documentation (assembly, operating, and maintenance instructions) -Diameter range (inner Ø): 1.5 - 165 (manual stroke) 1.5 - 95 (automatic stroke) Nolsv Tbq Sehccqtewd -Stroke length: 6 to 170 mm -Spindle speed: 200 to 3000 rpm (variable) -Spindle motor: 1.5 kW (3.0 HP) -Lift motor: 0.75 kW (1.0 HP) -Machine weight: 725 kg -Space requirement: approx. 3.5 m²

Year of construction: 1983, Condition: excellent (used), machine/vehicle number: 92289, Working Range: Manual stroking for internal diameters from 1.5 mm to 165 mm. External diameters: 3 mm to 115 mm. Nwolhovq N Ereccqtod Stroke Length: Adjustable from 1/8" to 16" (approximately 3.2 mm to 406 mm). Spindle Speeds: 12 adjustable speeds ranging from 200 to 2,500 revolutions per minute (RPM). Spindle Motor: 0.5 HP (approximately 0.37 kW), compatible with 110/220V single-phase power supply. Maximum Workpiece Weight: Approximately 2.7 kg. Machine Dimensions: Length: approximately 1,200 mm. Width: approximately 1,120 mm. Height: approximately 1,600 mm. Weight: Approximately 1,000 kg. Coolant System: Equipped with a coolant pump and a reservoir capacity of about 60 liters. This machine is ideal for precision honing applications and is designed to deliver consistent and accurate results for internal and external surfaces. Specifications may vary slightly depending on the model's year of manufacture and specific configuration. For more precise details, it’s recommended to consult the documentation of the specific machine.

Condition: refurbished (used), Single pass - progressive honing machine Nwjlhcovw Ddvscqtsd SUNNEN MHS 840 (like VSS 84) overhaul and electronic retrofit (see video and photos) 4 heads, 8-station rotary table This machine can be inspected under power in our warehouse Test run possible M i m u Machine Tools Gussago BS Italy Single-pass honing is a type of honing process used for finishing internal cylindrical surfaces, where a tool with a fixed set of abrasive stones passes through the bore only once to achieve the desired surface finish and dimensional accuracy. In this process, the tool is typically designed with a specific shape and size, allowing for precise material removal in a single stroke

Condition: like new (used), Year of construction: 2016, Never used honing machine Nolhccov Iathjqtowd

Condition: used, Year of construction: 2011, Precision honing machine SUNNEN KGM-5000TCG Machine data Year of manufacture: 2011 S/N: 1K1-1081 Spindle speed: 250 - 3,700 rpm Diameter: min./max. 3.81/32 mm 1 front light barrier 1 control unit, swiveling Loading/unloading device Linear travel: approx. 1,200 mm Separate cooling unit Nwjlhccjvym Najqtod Make: PFANNENBERG 1 sheet steel cabinet Doors: 2 Contents: 1 set of analog/digital measuring instruments, general machine accessories

Condition: new, Year of construction: 2025, Functionality: fully functional, Kwik-Way SVS2 Deluxe Valve grinder machine - new condition With rocker arm grinder. Technical details: Precision 6-ball chuck Accuracy: 0,005 mm Minimum valve stem diameter: 4 mm Maximum valve stem diameter: 14 mm Minimum valve stem length (approx): 85,73 mm Maximum valve head diameter: 100 mm Valve grinding wheel diameter: 178 mm Surface wheel diameter: 76 mm Spindle drive motor (H.P.): 0,37 kW Chuck drive motor (H.P.): 0,06 kW Coolant capacity: 3,8 ltr Chuck R.P.M. (approx.): 100 - 300 Grinding angles: 13° - 62° Main dimensions: W x L x H: 940 x 559 x 406 mm Weight: 141 kg If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Njlhccsnacu Doqtjwd Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: like new (used), SUNNEN gage setting fixture Nslomx Rkzehccqtowd Model : PG-400-EM

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, SUNNEN cross sanding machine with automatic lifting device in very good condition TECHNICAL DETAILS Honing diameter manual stroke: 1.5 - 165 mm automatic stroke diameter: 1.5 - 101.6 mm Stroke length: 6 - 170 mm Stroke speed: 60 - 500 1/min Spindle speed: 200 - 3000 rpm Spindle drive motor: 4.1 kW Nwolotuu Dpjhccqted MACHINE DETAILS Connected load: 10.5 kVA Machine weight: approx. 1 t Dimensions: 2.0 x 1.3 x 1.9 mm EQUIPMENT - two-stage grinding pressure (roughing & finishing in one cycle) - automatic grinding pressure regulation (SDR) - Automatic sanding strips - wear compensation - Filter system for honing oil cleaning - Zero cut-off or ASC

Condition: used, Sunnen EC3500 honing machine holes: 1,5 to 165mm dia. spindle motor 5.5HP Nwelhccqjurywkotsd auto stone compensation ASC auto sizing available as option More pics available Under power in our warehouse. Test run possible. Mimu Machine Tools (Italy) Sunnen EC3500 ml5000 ml3500 ml2000

Condition: ready for operation (used), Sunnen 1650 honing machine with stroke control and filter unit. Tools can be assembled according to customer requirements, we have a large selection of different honing mandrels. We also have measuring devices in stock that are especially suitable for honing work. We have been in the honing business for over 20 years and will be happy to advise you. Nolhceri Tiiecqtowd

Condition: new, Functionality: fully functional, Comec RV516.ASM Valve refacing machine – new machine With standard equipment and variable valve speed device. Technical details: Valve stem diameter: 4-16 mm Valve stem length: 55-230 mm Valve head diameter: 114 mm Face angles: 0° - 60° Grinding wheel speed: 2800 RPM Main grinding wheel diameter: 215 mm Nwolhcsnbdlmocqtod Voltage – Hz – phases: 400V/50Hz/3 Fázis Main dimensions: W x L x H: 700 x 600 x 700 mm Weight: 142 kg If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: refurbished (used), Honing machine SUNNEN EC3500 (like ml3500 ml5000 ml2000) Nweljphvk Iehccqtsd this machine is currently under complete electronic retrofit (Siemens / Telemecanique) Touch screen. Loader interface possible

Condition: excellent (used), Various new honing stones, horns, guide shoes and accessories Sunnen. Nwslhccqjigvraotjd Used honing stones Sunnen, PG800-EM