Used Lynette for sale (128)

Condition: used, bed width 220 mm daylight 130 mm centre height 240 mm dimensions of the machine ca. 0,5 x 0,3 x 0,15 m weight ca. 20 kg Additional lynette available upon request - Photo 2. Machine dealer with own stock of 2500 m². Folhcjxn Tw Ascqnjfu

Condition: good (used), Year of construction: 1977, workpiece weight 279 KG length ca. von Bett bis Lynette mm Fjlhcorfd U Recqnefu 189 € . max durchlass 369 mm

Condition: used, Hydraulic self-centering steady rest, luenette, lynette SMW AUTOBLOK Hydraulic steady rest with hydrostatic bearings Suitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar steady rest base: 245 x 240 mm Ffelhcoiv Irljcqnou Type of construction: stationary - 3 pieces roller bearing Ø 35 mm - roller width 18 mm - hydraulic self centering dimension L x W x H: 350 x 250 x 550 mm dead weight: 65 kg good condition

Condition: good (used), Fixed steady rest with roller inserts Max. clamping diameter: 200 mm Centre height approx.: 250 mm Below: 2 (individual) counter-supports Ffeljx Urvmjhccqnju Most likely from a VDF lathe

Condition: used, Steady rest, steady for lathe, travelling type for mounting on lathe carriage. Centre height: approx. 200 mm. Machining diameter: 90 mm. Steady rest base: 60 x 45 mm, Ø 16 mm. Hole spacing: 208 mm. - 2 adjustable bronze guide shoes. Net weight: 6.5 kg. Good condition. Fjlhccqsxw Rc Ienefu

Condition: used, Year of construction: 2000, swing diameter 530 mm 0 620 mm Wheel width 20 mm roll diameter 45 mm total power requirement ohne kW Ffjlewdiwtshccqnju weight 250 kg dimensions of the machine ca. 1,2 x 0,30 x 1,3 m

Condition: good (used), 1 x lathe from Hamburg 430 --- 1 x lathe from WEIPERT 425 --- 1 x lathe from VDF Fslhccqeyg N E Ijnefu

Condition: used, Year of construction: 2007, greates pass round over bed 670 mm swing diameter over bed slide 490 mm max. turning diameter 490 mm control SIEMENS - 840 D main spindle bore 115 mm external spindle dia. in forward position 160 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock. Fjlhcoxcbktjcqnofu Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, - 3 jaw chuck, A machine video from the production plant will be shared on request. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Heynumat 5 U | Heynumat 5-U | Heynumat 5 U 1500

Condition: used, Year of construction: 1998, turning length 3.000 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 3.700 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000 equipped with a well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition. Fslhccjxb Efrjqnjfu Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MC3000 | N40MC

Condition: used, Year of construction: 1952, Technical details: turning diameter over bed: 1000 mm turning diameter over support: 520 mm turning length: 2500 mm support travel z-axis: plan: ca. 500 mm support travel z-axis: Obersupport: ca. 300 mm centre height: 300 mm spindle passage: 90 mm range of revolution per miute: 3,2 - 382 / 22 step U/min range of feed in x - axis: längs: 0,213 - 2,67 / 36 step m/min range of feed in y - axis: quer: 0,070 - 1,11 / 36 step m/min tailstock quill taper MT: 6 total power requirement: 22 Ffolhccou Tq U Ieqneu weight of the machine ca.: 8,2 t dimension machine xH: 5,3 x 1.,6 x 1,6 m transport measurements machine: ca. 5,5 x 1,7 x 1,6 m Equipment: Faceplate Ø 1000mm 4-fold turning tool holder Lynette Ø 250 closed Accesorios four-jaw chuck Ø 630 i.D. *

Condition: ready for operation (used), Year of construction: 1977, Available immediately from insolvency: Stanko Lathes (longitudinal and transverse) Type 16 K 20 Year of manufacture: 1977 Retrofit and digital readout in 2012 Centre height: 200 mm Swing over bed: 400 mm Swing over cross slide: 220 mm Spindle bore: 55 mm Spindle speeds: 12.5 – 1600 rpm Drive: 7.5 kW Chuck Tailstock Coolant system Multifix tool holder with inserts Digital readout Steady rest (Lynette) Weight: 2700 kg Priced at EUR 2,500 plus VAT ex works Fjlhccqeyh A N Henjfu

Condition: used, L + Z Lathe WEWAG Model 250 / 1500 make no. 20953 year of construction approx. 1975 center distance 1500 mm nominal turning diameter over bed Ø 500 mm turning diameter over bed max. Ø 510 mm Center height over bed 255 mm turning diameter over support Ø 300 mm Center height over support 150 mm spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm. 24 steps lathe chuck support short taper DIN 55022 tailstock inner taper MK 5 drive power 4 kW and 6,7 kW pole-changing - 3-jaw lathe chuck BISON, Ø 250 mm - steel holder 4-fold for turning - fixed lynette - control cabinet fixed on the back of the machine Folhslzm Eqeccqnsfu weight 2500 kg

Condition: used, L + Z Lathe WAFUM Type TUD 40 Machine no. No. 35689 Year of construction 1975 Center width 1500 mm Turning diameter over bed Ø 440 mm Center height above bed 220 mm Center height above support Ø 125 mm Spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm 36 steps Chuck flange short taper DIN 55027 size 6 Inner tailstock taper MK 5 Drive power 4 and 6.7 KW - Spindle speed via 2 motor speeds and 18 gear stages Ffolhcsw Uf Hwscqnou - 3-jaw lathe chuck Ø 315 mm BISON with 2 sets of chuck jaws (lathe and drilling jaws) - MULTIFIX size B quick-change steel holder with 2 interchangeable cassettes - Fixed lynette with plain bearing inside Ø 125 mm - Moving lynette with plain bearing inside Ø 100 mm - Guide rail for turning slim cone with automatic longitudinal feed - 1 piece rotating center point - Hinged chuck guard Space requirement L x W x H 3100 x 1200 x 1450 mm weight 3000 kg good condition

Condition: reconditioned (used), Year of construction: 1995, CYCLE LATHE WEILER " E 35" With 2 axes Siemens Sinumerik 805 Year of construction: 1995 Spindle bore: 54 mm Center distance: 950 mm Rotation O over bed: 410 mm Speed range: 4 - 3000 rpm Ffslhsuzyw Djccqnsu With the following accessories: PARAT tool holder with 8 pcs. inserts Chuck guard 3 Jaw chuck 0 200 mm 4 jaw chucks 0 200 mm Fixed lynette 12 - 150 mm Chip collection tray Chip guard with lighting Coolant device 4 pcs. Height-adjustable machine shoes Operating instructions

Condition: used, Moving bezel, moving bezel, bezel, steady rest, lynette -Manufacturer: Meuser, steady rest from lathe M4L -Max. Passage: Ø 180 mm -Center height: 315 mm -technical drawing: with the photos -Dimensions: 520/535/H560 mm Ffolhccqsh Tgdqeneu -Weight: 32 kg

Condition: good (used), Bezel, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 166 mm Ffjlheuqf Nveccqnsu -Groove width: 32 mm -Dimensions: see photo technical drawing -Number: 2x clamps available -Price: per piece -Dimensions: 185/85/H47 mm / 184/82/H46 mm -Weight: 4.1 kg / 3.9 kg

Condition: used, lunette, steady rest, lynette Ffslouqf Tnshccqnou -Clamping tool: clamping bracket -Clamping width: 108 mm -Dimensions: see photo technical drawing -Dimensions: 124/73/H130 mm -Weight: 1.8 kg

Condition: used, Bezel, steady rest, lynette -max passage. Ø: 320mm (410mm) -Center height: 500 mm -Drawing: with the photos Fjlhcjd Nrpgecqnsfu -Dimensions: 1000/270/H900 mm -Weight: 216 kg

Condition: good (used), Bezel, setting stick, lynette Fjlhsg A I Eueccqnjfu -for: Crankshaft grinding machine -Technical drawing: see photos Quantity: 1 piece available -Dimensions: 380/85/H200 mm -Weight: 13.4 kg

Condition: good (used), Bezel moving, moving bezel, steady rest, Lynette -max. passage: Ø 170 mm -Support: ball bearing -Tip height: 345 mm -Hole spacing: 550 mm -Hole diameter: Ø 21 mm -Drawings: in the photos -Quantity: 1 piece available Fslhccqsdna Afjnefu -Dimensions: 605/80/H670 mm -Weight: 59 kg

Condition: used, lunette, steady rest, lynette Ffelhccju Rv Sveqnju -Clamping tool: clamping bracket -Clamping width: 142 mm -Dimensions: see photo technical drawing -Dimensions: 165/70/H125 mm -Weight: 2.5 kg

Condition: used, Bezel, stick, lynette -Max. Diameter: 325 mm -Tip height: 405 mm -Edition: ball bearings -Drawing: in the photos Fslhcjd Nhivscqnofu -Dimensions: 780/140/H845 mm -Weight: 97 kg

Condition: used, lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 95 mm -Dimensions: see photo technical drawing -Dimensions: 110/60/H98 mm -Weight: 1.3 kg Ffslhcceuqf S Djqneu

Condition: used, lunette, steady rest, lynette -Clamping tool: clamping bracket Folouqf Tbjhccqnjfu -Clamping width: 101 mm -Dimensions: see photo technical drawing -Dimensions: 117/83/H140 mm -Weight: 1.8 kg

Condition: good (used), Bezel, stick, lynette Fjlodcpixohccqnjfu -Max. Passage: Ø 240 mm -Tip height: 380 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 700/160/H830 mm -Weight: 120 kg