Used Dlz for sale (31)

Condition: good (used), functionality: fully functional, Internal article number: 26061 Lead and drive spindle lathe Leinen DLZ 140 + Collet set + Multifix "A" base holder Dodoz Hapgspfx Acpocn + 3-jaw chuck Röhm 125 + 4-jaw chuck Röhm 125 + 4-jaw chuck Röhm 160 + Lynette Center height: 140mm Distance between centers: 500mm Spindle speed: 15 - 3100 rpm The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our heated warehouse covering an area of over 500 square meters.

Condition: ready for operation (used), functionality: fully functional, L & Z Spindle Lathe / EXCELLO DLZ 500 SL x 3 Meter Turning Length - MACHINE IN WELL-MAINTAINED ORIGINAL CONDITION - Center height 250mm - Distance between centers 3000 mm - Turning diameter over bed 500mm - Turning diameter over cross slide 310mm - Bar capacity 65 mm - Spindle speeds 28 - 1400 rpm (geared) - Automatic longitudinal / facing feeds - Thread cutting / Metric / Inch etc. - 3-jaw chuck 250mm - 4-jaw chuck 250mm - Multifix base with inserts - Steady rest - Work light - Tool cabinet - Documentation Dimensions: L x W x H 5.5 x 1.4 x 1.6 meters / Weight 3800 kg Errors and omissions excepted. Djdpezwwf Aofx Acpscn

Condition: used, Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Dodoz Iz Hpopfx Acpocn Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

Condition: used, Niles Centre Lathe, Type DLZ800 LIV5000, Approx 5.2m Between Centres x 860mm Swing Over Bed, 250mm Swing Over Saddle, Fitted with 750mm 4 Jaw Chuck, 2 Fixed Steadies Steadies, Total Weight 7 Tons, Serial No Specifications: Swing: 1,000 mm Centers: 8,000 mm Dedjzvrrhopfx Acpecn

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 530 mm, spindle bore: 90 mm, turning diameter: 920 mm, Lathe type WMW DLZ 800 III for sale. Equipped with Heidenhain digital readout. The machine functions flawlessly and has seen very little use (mainly for maintenance). Includes faceplate, 2x steady rests, several tool holders, and operating manual. - Heidenhain digital readout - Turning length: 3150 mm - Weight: approx. 7300 kg - Power: 13/20 kW Dodpfoy Ar Nisx Acpecn - 380 V - Swing over bed: 800 mm - Swing over gap: 920 mm - Swing over cross slide: 530 mm - Spindle bore: 90 mm - Tailstock MK-6 Loading by forklift. Shipping possible by arrangement. Please feel free to contact me with any questions.

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 630 mm, LATHE TECHNICAL SPECIFICATION – PERFORMANCE OVERVIEW Workpiece Capacity Turning diameter over bed (nominal / max): 630 mm / 660 mm Turning diameter over carriage: - Short slides: 400 mm - Long slides: 320 mm Max. swing in front of faceplate notch: 720 mm Notch length: 265 mm Over bed: 305 mm Over floor: 1125 mm Dodpfx Acex Acpdepocn Machine Construction & Spindle System Bed width: 550 mm Spindle bore: 72 mm Faceplate: - Diameter: 630 mm - Width: 120 mm Tooling & Setup Tool cross-section (cutter): 40 × 40 mm Tool holder side length: 200 mm Spindle & Drive Performance Main motor speed: 1400 rpm Spindle speed steps: 18 Max. permitted faceplate speed: 560 rpm Feed Ranges Longitudinal feeds: - Steps: 68 - Range: 0.035–10 mm/rev Cross feeds: - Steps: 68 - Range: 0.014–4 mm/rev Rapid Traverse Rates Longitudinal: 5000 mm/min Cross travel: 2000 mm/min Thread Cutting Capability Metric threads: - 84 types, 0.2–224 mm Inch threads: - 94 types, 140–1/8 TPI Module threads: - 72 types, 0.1–112 Pitch range: - 94 types, 280–1/4 Machine Dimensions Overall length: 2300 mm + distance between centers Width: 1850 mm Height: 1725 mm Ask for a testing video! Robust and precise heavy-duty lathe featuring wide turning capacity, extensive thread cutting options, and high feed/rapid traverse performance. Ideal for demanding workshops requiring versatility, power, and reliability.

Condition: good (used), Year of manufacture: 1963 Machine number: 47 Type / Model: DLZ 355x1600 Control: conventional Center distance: 1,600 mm Bore: 35 mm Center height: 180 mm Swinging diameter over bed: 355 mm Dodpsznbt Sofx Acpecn Swinging diameter over carriage: 180 mm Swinging diameter in the headstock: 700 mm Spindle speed range: 18 to 2,500 rpm Feed rate, longitudinal: 0.011 to 1.000 mm/rev Connection: 5.8 kW Accessories/Equipment: 3-jaw chuck 200 mm; 4-position tool holder, guide rest Condition: good, ready for use Weight: 2.2 t Footprint: 2,700 x 450 mm Dimensions: 3,000 x 1,100 x 1,300 mm

Condition: good (used), functionality: fully functional, Internal article number: 26060 Lead screw and feed spindle lathe Leinen DLZ 140 + Digital display + Multifix "A" base plate Dcodpfjzd Txlsx Acpjn + Three-jaw chuck + Four-jaw chuck Center height: 140 mm Distance between centers: 500 mm Spindle speed: 15 - 3100 rpm This machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our over 500 m² heated storage area.

Condition: used, Year of construction: 1969, turning diameter over bed 500 mm turning diameter over slide rest 330 mm turning diameter in the gap 600 mm turning length 3000 mm bed width 505 mm spindle bore 72 mm spindle head DIN 55022 Gr. 8 Djdey Tyy Depfx Acpocn taper in tailstock MK 5 turning speed range 22,4- 1120 U/min power requirement 18,5 kW dimensions 5,3 x 1,75 x 1,53 m weight of the machine ca. 5,2 t used lathe in nice condition with digital scale - 2 axis digital scale - 4 jaw chuck Ø 250 mm - 3 jaw chuck Ø 260 mm - Multifix "C" toolholder system - some toolholders - steady

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 360 mm, spindle bore: 105 mm, turning diameter: 500 mm, center width: 1,500 mm, rotational speed (max.): 1,600 rpm, New conventional lathe DLZ 560x2000 with extensive accessories. Main Technical Data: Max. turning diameter over bed: mm Ø500 Max. turning diameter over cross slide: mm Ø310 Max. turning diameter in gap: mm Ø720 Bed width: mm 405 Max. workpiece length (between centers): mm 1500 Max. turning length: mm 1350 Effective gap length: mm 230 Spindle Spindle nose: D8 Spindle bore: mm Ø80 Spindle taper: M.T. No.7 Metric Ø113 1:20 Spindle speed (steps): 12 speeds Spindle speed range: rpm 36–1600 Further technical details available in the attached document. Main Features: - All-inclusive price with 2-axis position indicator (SINO – General importer in Germany), installed, and powerful 7.5 kW drive - Heavily ribbed machine bed for excellent vibration absorption, even during roughing operations - Extra-wide, induction-hardened and ground guideways for long service life and high precision. Max. workpiece weight up to 500 kg - Electrically interlocked chuck guard - Equipped with adjustable micrometer stop and overload clutch - Hardened and ground gears with oil circulation lubrication for powerful and quiet spindle drive - Precision spindle bearings for high concentricity and accuracy - Clearly arranged, ergonomically designed controls - Single-lever operation for cross feed, longitudinal feed, and rapid traverse for X/Z axes on the carriage Dcodpfxsyak Evo Acpjn - Precise gearshift for speed and feed selection - Finely graduated feed rates and thread pitches - Main spindle gearbox with electromagnetic clutch - Major electrical components by renowned European manufacturers, e.g. Telemechanique - Comprehensive standard equipment including Multifix tool post, chuck, faceplate, 3-axis digital readout, steady rests and much more - All machines are tested by our service engineers prior to delivery Additional models (also with cycle control) available on request. Contact us today and discover the world of innovative turning technology! Our services for you: • On-site consultation and solution finding • Organization of machine transport to your facility • Installation, commissioning, and turnkey handover • Financing and support with subsidy applications via KFW, BAFA, and more

Condition: used, Lathe Manufacturer: WMW/BWF Dodpfxjyt Nn As Acpecn Year of manufacture: 1959 Machine number: 8932-05 Type / Model: DLZ 400/1500 Control: Conventional Centre distance: 1,500 mm Spindle bore: 40 mm Centre height: 200 mm Turning diameter over bed: 400 mm over cross slide: 250 mm Drive power: 5 kW Accessories/Equipment: Standard tool holder; 3-jaw chuck Condition: Good Weight: 3 t Dimensions: 3,100 x 1,000 x 1,500 mm

Year of construction: 1958, condition: ready for operation (used), Offered is a conventional lathe. Swing diameter over bed: 500mm, swing diameter over support: 300mm, spindle bore: 58mm, taper in the tailstock quill: MT 4, design: conventional leadscrew and feed rod lathe, control: manual. Equipped with three-jaw chuck, four-way tool post, tailstock, chip tray. Weight: approx. 2200kg, overall dimensions X/Y/Z: approx. 2700mm/1100mm/1350mm. Inspection possible by arrangement. Dodpfx Acjzdknwepocn

Condition: used, Stock number: 2841 Manufacturer: WMW Year of manufacture: 1961 Machine number: 3318/61 Type / Model: DLZ 355 Control: conventional Center distance: 2,000 mm Spindle bore: 35 mm Center height: 180 mm Turning diameter over bed: 355 mm over carriage: 220 mm Speed range: 18 to 2,500 rpm Dedpfxey Hgnzo Acpscn Longitudinal feed: mm/rev Cross feed: mm/rev Equipment: 4-way toolpost, leadscrew Power connection: 5.8 kW Condition: used Weight: 2.2 t Dimensions: 3,000 x 1,400 x 1,700 mm

Condition: good (used), Year of construction: 1954, machine/vehicle number: 1749, Offer 24178 Technical data: - Center height 250 mm - Center width 2000 mm - larger circulation - Ø over bed 490 mm - over cross slide approx. 300 mm - Spindle bore 72 mm - Taper of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 25 - 1160 rpm Dodpfotiym Rex Acpjcn - Feed rates - Travel of the cross slide 200 mm - Travel of the top slide 115 mm - Drive 380 V / 5.5 kW - with: - tailstock, 3-jaw chuck, steady rest - Steel holder, rotating center point, - chip tray - Space requirement approx. W 3500 x H 1500 x D 1300 mm - Weight approx. 3000 kg

Year of construction: 1965, condition: ready for operation (used), A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993. Dcjdpfsvy E A Sjx Acpen

Year of construction: 1983, condition: ready for operation (used), Turning diameter over bed/face slide: 630mm/340mm, turning length: 2000mm, center height: 290mm, clearance: 70mm, speed: 1180rpm, chuck: 400mm wedge bar chuck, tailstock: MK5, total power requirement: 15kW, machine dimensions X/Y/Z: approx. 5000mm/1350mm/1500mm, weight: approx. 4500kg. Including 2x 340mm steady rests, 2x medium steady rests, face plate with a diameter of 630mm, 2x face plates with cross slots, various tool holders, steady rest box, tool cabinet with additional tools, Heidenhain position indicator and 400mm key bar chuck. Documentation available. On-site inspection is possible. Dcodsu Av E Hspfx Acpsn

Condition: ready for operation (used), Center height: 450mm, distance between centers: 3000mm, fuse protection: 630A, rated current: 46A, control voltage: 220V, operating voltage: 380V, frequency: 50Hz, connected load: 22,5kW, weight: 6,1t, with four-jaw chuck (diameter: 800mm), tailstock, quill and three steady rests. An on-site inspection is possible. Dcsdpfx Acezukufspon

Condition: ready for operation (used), Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible. Dcedpfxjzukt Ij Acpsn

Condition: used, Technical details: turning diameter over bed: 1200 mm turning diameter over support: 800 mm turning length: 3200 mm length of gap: 600 mm center height measured in bed: 600 mm turning dia. in gap: 600 mm spindle turning speed - continuous: 4,6-545 / 22 steps U/min spindle passage: 90 mm feed: 1,4-510 m/min taper: MK6 total power requirement: 15 kW weight of the machine ca.: 10,0 t dimensions L x W x H: 6,20x2,00x1,80 m Dsdpfxezuyfao Acpjcn dimensions electric cabinet LxWxH: 0,55x0,33x1,0 m equipped with: face chuck diameter 1000m (4 jaw chuck) fourfold chisel taper steady rest closed, inside diameter 250mm revolving tail center conical turning device *

Condition: used, Year of construction: 1960, Technical details: turning diameter over bed: 630 mm turning diameter over support: 320 mm turning length: 2800 mm centre distance: 2800 mm turning dia. in gap: 700 mm length of gap: 450 mm spindle bore of work spindle: 70 mm weight of the machine ca.: 4,4 t dimension machine approx.LxWxH: 4,7 x 1,5 x 1,5 m Thread cutting possible Dsdpfxou Ix A Es Acpocn Accessories: 4-jaw chuck various tips Gear wheels Jaws and small parts *

Condition: used, Year of construction: 1959, machine/vehicle number: 1727, Offer 24177 Dcodpfxsv Hckgs Acpsn Technical data: - Center height 180 mm - Center distance 1000 mm - Larger swing – Ø over bed 355 mm - Over cross slide approx. 200 mm - Spindle bore 36 mm - Taper of tailstock quill MK 5 - Travel of tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm - Feeds - Travel of cross slide approx. 200 mm - Travel of top slide approx. 115 mm - Drive 400 V / 5.8 kW - With: - Tailstock, 3-jaw chuck, steady rest - Steel holder, live center, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

Condition: used, turning length 600 mm turning diameter over bed 360 mm Dcedjxaamujpfx Acpjn turning diameter over slide rest 190 mm bed width 295 mm number of spindle speeds 45 - 2240 U/min. spindle bore 33,0 mm tailstock quill taper MT MK 3 feed Längs 0,02-0,8 mm/U feed Quer 0,0125-0,5 mm/U total power requirement 5,5 kW weight of the machine ca. 1900 kg range L-W-H 2050 x 950 x 1280 mm Refurbished and repainted in 2013 Costs around 16.000 euros Furnishing: - WNW NILES 3-jaw chuck Ø 200 mm - Multifix steel holder size B with inserts - revolving center points - chuck key - Movable tailstock - Operation manual

Condition: used, Year of construction: 1955, Technical details: turning diameter over bed: 420 mm turning diameter over support: 240 mm turning length: 1100 mm turning dia. in gap: 600 mm range of revolution per miute: 24 - 900 / 8 step U/min spindle bore: 41 mm range of feed in x - axis: 0,0120 - 0,1000 mm/U range of feed in y - axis: 0,0062 - 0,0302 mm/U tailstock quill taper MT: 3 tailstock quill adjustment: 220 mm total power requirement: ca. 4,0 (ohne Gewähr) kW weight of the machine ca.: 1,2 t dimension machine xH: 2,3 x 0,9 x 1,3 m Equipment: 3-jaw chuck Ø 200mm Tool holder 4-way, swivelling 30° right/left Dcedpfxeu Ix D As Acpsn T-slot for copying device Driving disc *

Condition: used, Year of construction: 1963, Technical details: turning diameter over bed: 1000 mm turning diameter over support: 620 mm turning length: 3150 mm centre distance: 3150 mm turning diameter in the gap: 1200 mm length of gap: 800 mm weight of the machine ca.: 11,5 t dimension machine approx.LxWxH: 7,5 x 1,5 x 1,7 m incl. 2x steady rests and various tips * Dcedpfx Aju Ix Arecpen

Condition: used, mileage: 849,475 km, power: 290 kW (394.29 HP), first registration: 07/2017, fuel type: diesel, next inspection (TÜV): 08/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total length: 9,135 mm, total width: 2,600 mm, total height: 3,730 mm, loading space length: 7,380 mm, loading space width: 2,500 mm, loading space height: 2,320 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, Mercedes-Benz ANTOS 2540 complete truck * 07/04/2017 * 290 kW * 849,475 km * Automatic transmission * EURO VI * Diesel * 10,677 ccm * 1 lower bunk * Driver’s comfort air-suspension seat & passenger’s functional seat, fabric upholstery * Front axle with air suspension * Rear steered, load-relieving & liftable axle * Axle ratio i=2.733 * ABS & ASR * Disc brakes on front and rear axles * Secondary water retarder * Wheelbase 4900 mm * Air conditioning * Remote control for air suspension * Wheel configuration 6x2 * CD radio * Bluetooth * BÄR tail lift Dcsdpfxezwrzfj Acpsn * D 50 Ringfeder trailer coupling * ESP * Cruise control * MITSUBISHI refrigeration unit Schmitz CARGOBULL * 07/05/2017 * SCB?C2 * ZKO 18/L -FP 45 COOL DLZ * BÄR tail lift * All information without guarantee