Used Cwk for sale (17)

Condition: repair required (used), Year of construction: 1998, operating hours: 34,188 h, functionality: limited functionality, machine/vehicle number: 18455, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, torque: 165 Nm, controller manufacturer: Siemens, total height: 2,500 mm, total length: 10,000 mm, total width: 6,000 mm, table width: 400 mm, table length: 400 mm, table load: 400 kg, overall weight: 12,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 19,000 W, number of spindles: 1, number of slots in tool magazine: 240, Equipment: chip conveyor, documentation/manual, We are offering a Starrag Heckert CWK 400D horizontal machining center from 1998, which requires repair. Manufacturer: Starrag Heckert Model: CWK 400D Machine type: Horizontal machining center Year of manufacture: 1998 Condition: Requires repair Dwsdpj Ah Sn Sofx Aared If you have any questions or need further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 10160, travel distance X-axis: 800 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 805 mm, rapid traverse X-axis: 38 m/min, rapid traverse Y-axis: 38 m/min, rapid traverse Z-axis: 38 m/min, total height: 3,500 mm, total length: 7,000 mm, total width: 6,000 mm, overall weight: 17,000 kg, number of slots in tool magazine: 180, tool length: 600 mm, tool diameter: 250 mm, tool weight: 35,000 g, STARRAG HECKERT CWK 500 Horizontal Machining Center - Tool holder: HSK A 100 - Min. distance from the front edge of the working spindle to the center of the pallet: 150 mm - Min. distance from the center of the working spindle to the top edge of the pallet: 100 mm - Max. permissible height of workpiece and clamping devices for changing the work area: 900 mm - Workpiece side (pallet) with hole grid according to DIN 55201, clamping surface: 500 x 500 mm Dwodpfj Afnc Esx Aarjd - Max. load per pallet (centered): 800 kg - Guide bore diameter: 20 H6 - Centering bore diameter: 50 H6 - Number of mounting threads: 23 x M12 - Distance of the guide bore to the center of the table: diameter 200 +- 0.013 mm - Interference circle diameter: 800 mm - Max. table rotation: 18 rpm - Automatic pallet changer - Pallet changer with rotating setup station - max. pallet change time: 10 sec - Pallet change time with clamping hydraulics: min. 12 sec - Feeds: X/Y/Z axis: continuously adjustable working feed range: 1 - 38,000 mm/min - Working spindle diameter in the front bearing: 100 mm - Max. tool diameter with free neighboring positions: 250 mm - Max. tool diameter for bridge tools: 500 mm - Max. tool diameter with occupied neighboring positions: 125 mm - Tool overhang length: 600 mm - Max. tool weight: 35 kg - Average tool weight with full occupancy: 10 kg - Max. imbalance in the tool magazine: 100 kg - Number of pallets: 2 With Balluff system, technical documentation, with RENISHAW 3D measuring probe, including 30 HSK 100 tool holders, mostly equipped with tools. Transport: The machine can most likely be transported on a truck with a width of up to 3000 mm. FCA D-01445 Radebeul - loaded onto a truck

Condition: good (used), Year of construction: 2005, Ref. -No.: 10669 Manufacturer: STARRAG HECKERT Type: CWK 400D Year of construction: 2005 Type of control: CNC Control: Siemens Sinumerik 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 625 mm Y-Travel: 650 mm Dwsdo Ahkyzopfx Aarsd Z-Travel: 650 mm Max. Tool Weight: 10 kg Max. Tool Length: 350 mm Max. Tool Diameter: 80 mm Tool Taper: HSK-A63 nach DIN 69893 Numbers Of Tools In Magazin: 60 Spindle Turning Speed - Stepless: 50-10.000 RPM Numbers Of Pallets: 2 Max pallet load: 400 kg Size Of Pallet: 500 x 400 mm pallet change time: 8/5 s coolant reservoir: 1100 L. Machine length: 5800 mm Machine width: 4800 mm Weight Of The Machine Ca.: 12,8 t Spindle power: 24 / 37 kW Further information: Equipment Pallet changer Chain-type tool magazine with 60 tool positions KNOLL coolant system with fleece filter Internal and external emulsion cooling Renishaw probing system Tool breakage detection in the tool magazine Chip conveyor Sound shower (noise reduction system) Paper band filter Coolant gun at the setup station Fully enclosed working area in accordance with safety regulations Automatic pallet sequence operation Network connection Ethernet interface Technical documentation Installation layout / foundation plan The machine is currently in active production and can be inspected under power and in operation by prior arrangement

Condition: ready for operation (used), Year of construction: 2005, operating hours: 3,648 h, functionality: fully functional, travel distance X-axis: 625 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 625 mm Travel range Y-axis: 650 mm Travel range Z-axis: 650 mm B-axis swivel range: 360° B-axis resolution: 0.001° B-axis speed: 100 rpm Spindle speed: 50–10,000 rpm Spindle power: 24 / 37 kW Spindle torque: 250 / 350 Nm Spindle operating hours: 3,648 h Tool interface: HSK-A63 according to DIN 69893 Number of pallets: 2 Pallet size: 500 × 400 mm Pallet load capacity: 400 kg Pallet change time: 8 / 5 s T-slots: according to DIN 55201 Magazine capacity: 60 Max. tool diameter: 80 mm Max. tool diameter with free adjacent slots: 160 mm Max. tool length: 350 mm Max. tool weight: 10 kg Max. total weight of tools: 200 kg MACHINE DETAILS Control system: Siemens Sinumerik 840D Coolant tank volume: approx. 1,100 l Coolant pressure: 50 bar Dimensions & Weight Dimensions (L x W): 5,800 x 4,800 mm Machine weight: 12,800 kg Total automatic operation: 32,099 h Total operating hours: 20,326 h Spindle hours: 3,648 h EQUIPMENT Pallet changer Chain magazine with 60 tool positions Dedpfxoz Izc Rj Aarowd Knoll coolant unit with filter fleece Emulsion cooling inside and outside Renishaw measuring probe Tool breakage monitoring in the magazine Chip conveyor Sound enclosure Paper band filter Rinsing gun at the setup station Closed work area enclosure according to UVV Pallet sequence operation Network connection Ethernet interface Technical documentation Layout plan

Condition: good (used), Year of construction: 2002, Ref. -No.: 10670 Manufacturer: STARRAG HECKERT Type: CWK 500 D Year of construction: 2002 Type of control: CNC Control: HEIDENHAIN TNC 426 Storage location: Halberstadt Country of origin: Germany X-Travel: 750 mm Y-Travel: 750 mm Z-Travel: 700 mm Max. Tool Weight: 10 kg Max. Tool Length: 400 mm Dwsdpfo Ahky Eex Aarod Max. Tool Diameter: 160 mm Max. Size Of Workpiece Lxwxh: 85 mm Tool Piece Magazine With: 80 Pcs./pcs. Spindle taper: HSK63 Spindle Speed: 15.000 RPM Max. Torque: 350 Nm axes: 4 Rapid Traverse: 40 m / min Internal cooling: 50 bar Numbers Of Pallets: 2 Max pallet load: 500 kg Size Of Pallet: 500 x 500 mm pallet change time: 9 s Machine width: 4000 mm Machine Height: 3300 mm Weight Of The Machine Ca.: 15 t Further information: The machine is currently in active production and can be inspected under power and in operation by prior arrangement.

Condition: refurbished (used), 1. Machine Specifications * 2 work tables with automatic pallet changer - Clamping area 400 x 400 mm - Perforated pallets - Max. clamping weight 400 kg - NC rotary table - Rotatable clamping position * Travel ranges - Column longitudinal travel (x) 650 mm Djdpfx Asz H Tn Aoarewd - Support vertical travel (y) 500 mm - Table transverse travel (z) 650 mm * Max. feed rate 36 m/min * Rapid traverse 40 m/min * Working spindle - Tool interface - SK 40 DIN 69871 - Drive power 24 kW AC - Torque 230 Nm - Speed range, stepless 0 ... 10000 rpm * Coolant supply through the spindle center 50 bar * Tool magazine 60 positions * Control system Sinumerik 840 D * Machine bed made of mineral cast * Enclosed work area protection * Chip conveyor * Paper band filter system 2. Technical Condition The machine was only used in production until February 2013! Due to the overhaul, the machine meets the acceptance conditions for new machines. - The machine was completely disassembled and cleaned. - All compact guides and ball screw drives were replaced. - The main drive motor and feed motors were inspected in authorized workshops and, if necessary, refurbished. - The main spindle body was replaced with a new one, the spindle was re-bearinged, and run-in on the test stand. - All cables, air lines, and defective sensors were replaced. - Table assembly, magazine, tool changer, and coolant system were overhauled. - The panes of the work area protection were renewed, and a new paint job was applied. In addition, a new main spindle and a new Kessler motor can be supplied as spare parts. 3. Warranty: last inspection 03/2013; 3 months 4. Prices: * Machine €110,000.00 * Installation/Commissioning €6,000.00 (for installation/commissioning abroad, travel costs will be added) 5. Delivery Conditions: * Pricing: Prices are quoted net for delivery or service ex works. We reserve the right to sell the machine in the interim. Our delivery and service terms and conditions apply. * Payment terms: 30% down payment upon order against invoice 60% upon delivery 10% upon handover * Delivery time: 4 weeks

Condition: excellent (used), Year of construction: 2005, Machining center CWK 400 Year of manufacture: 2005 X travel: 650 mm Y travel: 650 mm Z travel: 650 mm Rotary table (4th axis) CNC: Siemens Sinumerik 840 D Table length: 400 mm Table width: 400 mm Workpiece weight: 400 kg Operating hours: 42,000 h Tool changer chain magazine: 80 tools, HSK 63 2-pallet pool Dodpfx Ajwpciasarjwd Weiss motor spindle: 36 kW, 18,000 rpm Accessories and 60 tools included

Condition: used, Year of construction: 2002, x-travel 650 mm y-travel 650 mm Djdpfx Aajzmy Tuerewd z-travel 650 mm Control Siemens 840 D weight of the machine ca. 12 t

Condition: used, Year of construction: 2003, x-travel 800 mm y-travel 600 mm Dwodpfxeuddgfs Aarjd z-travel 805 mm Control Sinumerik 840D weight of the machine ca. 13 t 1 horizontal machining centre Make: HECKERT type: CWK 500D year 2003 serial no. 16087 control, make: Siemens, type: Sinumerik 840D travel X/Y/Z 800 x 600 x 805 mm 2-fold pallet changer pallet size 500 x 500 mm NC-rotary table 360 x 0,001° 60-fold tool changer, tool holder HSK 63 Speed max. 15,000 rpm IKZ 50 bar Operating hours 32,450 Spindle hours 6.080 Accessories: Coolant temperature control, belt filter, chip conveyor, spindle cooling, Infrared probe preparation

Condition: used, Year of construction: 1999, x-travel 1250 mm y-travel 910 mm z-travel 875 mm Control Siemens type 840 D size of pallet 800x800 mm numbers of pallets 2 turning speeds 20-6000 U/min transmission ratio 2 Dedsyqu D Repfx Aarowd Feed 1-32000 mm/min 360x1 ° turning speeds 16,5 U/min Table load 1150 kg spindle taper ISO 50 Tool changer 165 Pos. weight of the machine ca. 18,5 t IKZ 70 bar B - NC rotary table The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 650 mm, controller model: Siemens 840 D, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 500 mm Travel Z-axis: 650 mm B-axis: 360,000 x 0.001 mm Pallet size: 400 x 500 mm Spindle speed: 50 – 10,000 rpm Tool holding system: SK 40 Dodpoymw S Aofx Aarewd Number of tools in magazine: 60 Rapid traverse: 40 m/min Feed rate: 1 – 20,000 mm/min MACHINE DETAILS Control system: Siemens 840 D Power requirement: 65 kW

Condition: used, functionality: fully functional, 1. Machine specifications * Pallet changer with 6 pallets - Clamping area: 4 x 800 x 800 mm 2 x 800 x 1000 mm - Max. clamping weight: 2000 kg - Interference circle: D = 1200 mm - Changeover time: 35 sec. * Travel ranges - Workpiece (x): 1140 mm Dwodpfez H Tqdsx Aarsd - Support vertical adjustment (y): 910 mm - Column transverse adjustment (z): 875 mm * Max. feed force: 20,000 N * Rapid traverse: 24 m/min * Working spindle - tool holder - SK 50 DIN - Drive power 100/40 % duty cycle: 22/32 kW - Torque 100/40 % duty cycle: 720/1040 Nm - Speed range, stepless: 20 ... 6000 rpm * Coolant supply through the spindle center: 10 bar * Tool magazine (cassette): 186 positions - Average chip-to-chip time: 11 sec. * Control system: Siemens 840C * Work area protection 2. Year of manufacture: 1995 The machine was only used in production until February 2011!!! 3. Warranty: none 4. Prices: * Machine: €30,000.00 5. Delivery conditions: * Payment terms: 100% before collection * Delivery date: ex-stock

Year of construction: 2001, condition: good (used), machine/vehicle number: WAG737, Size: 630 x 630 mm Threaded holes according to DIN 55201 available: 5 pieces Dwsdpfx Aeddxd Tsarsd

Condition: good (used), Year of construction: 2009, TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Merkle, TIG welding machine water-cooled, with transport trolley -Type: TIG 240 DC -Welding power: max. 240 A -Cooling: Merkle WK 230 water circulation cooler -Accessories: incl. ground cable, hose package see photos -Dimensions: 970/560/H1085 mm -Total weight: 99 kg Dwedpfjqw D Eisx Aarjd

Condition: new, diameter / mm Cutting (quantity) / weight / kg Dwjdpfsuddgrex Aarsd Spindle type: 180.6.C1/FS/19-1.1/15-1D/165/HSK-A63 Ident No.: 180.6C1/x003618B2 Milling spindle for Starrag Heckert CWK 400D.

Condition: new, Year of construction: 2025, machine/vehicle number: 2021, 3D AC SERVO SkyCNC WK Series Milling Machine - 2050mm x 3050mm x 220mm High precision - milling and drilling with extremely high speed and quality. As a CNC milling machine manufacturer, pfeifer-technology is your partner with skycnc CNC milling machines and engraving machines. Our PFEIFER technology skycnc WK series milling machines with high-precision ball-spindle drive on all axes offer you the highest precision, accuracy and speed - and all this with a pleasant price-performance ratio. Due to the structure with a high solid steel base frame approx. 4 t, a high static rigidity of the machine is achieved, so that the processing of solid wood and different metals is possible without any problems. The sophisticated position and distribution of the 35mm linear rails and guides and the associated massive portal with its vibration-damping properties characterize our CNC milling machines in particular. All machine components and the servo drive units used are the result of years of development and experience. The powerful servo motors are highly effective and backlash-free with the ball screw from German quality production and thus offer a feedback-free drive to meet even the highest demands. The superior, freely programmable CNC control enables flexible intervention by means of a touchscreen under all production conditions and is standard on our PFEIFER technology skycnc WK series milling machines. With this CNC control you can create your milling data or import CAD/CAM data and then process them independently of a computer. The tool changer (up to 16 tools), the all-aluminum vacuum table, various tool/workpiece cooling solutions, the automatic lubrication system for all axes and other ingenious details round off this milling system. With the PFEIFER technology skycnc WK series you get a reliable and powerful large portal milling system for your applications. On request, we can supply the corresponding CAD / CAM ARTCAM SKYCNC control software: 2.5 / 3D PFEIFER SKYCNC milling & engraving software in German for Windows® operating systems or ArtCAM Pro / ArtCAM Insignia software in German / Russian etc. on request. - Drive system: high-precision ball screw on X and Y axis and Z axis from high-precision German production - Working speed: 15 m/min - xyz working area/travel area: 2050 x 3050 x 220 mm - Table size (vacuum table with milled vacuum tracks): 2000 x 3000 x 30 mm - xyz repeat accuracy: 0.02mm - XYZ Accuracy: 0.01mm - Compatible with Software Type3, ARTCAM, MASTERCAM, FeatureCam, etc. - Formats: ISO standard G-code, FANUC compatible - Addition: Spindle motor / Tool changer / Vacuum table according to customer requirements - Warranty: 1 year - Spindle power: from 5.5kW (other spindle powers optional) Dedpfx Aobnpgxearewd - Spindle speed: 6000 - 24000 rpm (depending on requirements) - Spindle mount: BT30 / ER20 (other mounts optional) - Drive: AC SERVO motors on all axes - Tool changer: 4-8 magazine places - PDSP control RTU / MTU (Remote Terminal Unit) - Power input: AC400V±10% 50Hz - Power consumption 10-15 kW (depending on equipment) - Dimensions: 4500 (L) X 3100 (W) x 2500 (H) mm - Weight: 4000kg

Condition: new, Year of construction: 2025, machine/vehicle number: 2021, 3D AC SERVO SkyCNC WK Series machine - 1250 mm x 1250 mm x 220 mm High precision - milling and drilling with extremely high speed and quality. As CNC Milling machines manufacturer whistler-technology with SkyCNC CNC milling and engraving your partner. Our PFEIFER technology SkyCNC WK series milling machines with high-precision ball screw drive on all axes provide highest precision, accuracy and speed - with a pleasant value for money.   By building a high solid steel base frame ca. 2,2 t high static rigidity of the machine is achieved, so that the processing of solid woods and various metals will be trouble. The sophisticated location and distribution of 35mm linear rails and guides and the associated massive portal with its vibration damping characteristics distinguish our CNC milling machines made especially. The superior programmable CNC control allows flexible intervention via touchscreen in all production conditions and is standard in our PFEIFER technology SkyCNC WK series milling machines. This CNC control, you can create your milling data or CAD / CAM import data and then can be processed independently of a computer.   The tool changer (up to 16 tools), the vacuum table made of solid aluminum, various tool / workpiece cooling solutions, the automatic lubricating device for all axes and other refined details, complete this milling system.   With the PFEIFER technology SkyCNC WK series you get a reliable and efficient bulk - Portal - milling system for your applications.   - Drive system: high-precision ballscrew on X and Y axis and Z axis of high-precision manufacturing - Operating speed: 15 m / min - Xyz Workspace / traverse: 1250 x 1250 x 220 mm - Table size (vacuum table with milled vacuum tracks): 1220 x 1220 x 30 mm - Xyz Repeatability: 0.03mm - Xyz accuracy: 0.01 mm - Compatible with DIN ISO CAM etc. - Format: ISO standard G-code, FANUC compatible - Additional: Spindle motor / tool changer / Vacuum table according to customer requirements - Warranty: 2 years - Spindle Power: from 5.5kW (other spindle power optional) - Spindle speed: 6000-24000 U / min (depending on requirements) - Spindle taper: BT 30 4ea ER20 (other recordings optional) - Drive: AC SERVO motors on all axes - Tool changer: 6 magazine slots - Power supply: AC400 V ± 10% 50Hz - Power 10-15 kW (depending on equipment) - Dimensions: 2670 (L) X 1735 (W) x 1790 (H) mm Dodps Sd U Dofx Aarowd - Weight: 2700 kg