Honing machine

Sunnen

Condition: excellent (used), Sunnen GH210 Horizontal Hone Year 2010 Max Stroke 8000mm, Spindle Speed:0 - 300 rpm Maximum Spindle Power: 40 Hp (29.83 kW) Maximum Stroker Power: 18 Hp (13.42 kW) Stroke Speed Range: 0 – 100 ft/min (0 – 30.5 m/min) I.D. Range: 2 – 24 inches (50.8 – 609.6 mm) O.D. Range: 26 inches standard (660.4 mm) Rsdpfxsw U Uh De Alrsu Maximum Part Weight: 8000 kg Approximate Machine Weight: 12,066 kg 400 VAC 50 Hz, 3-Phase (85 A) Siemens Simatic Control,

Condition: excellent (used), Year of construction: 2021, Traverses X Y Z: 508 x 406 x 356mm, Table 1016 x 353mm, Spindle taper BT40, 20Hp spindle motor, Spindle Speed 10000rpm, HAAS Control, Rsdoyw R Hpopfx Alrsu 20 Station ATC, coolant.

Condition: used, Year of construction: 2004, functionality: fully functional, Well used Sunnen honing machine with Felsomat loading system. Diameter range (INSIDE Ø)¹: Rsdpfeud Nm Rex Alrju Krossgrinding® tools: 5.46 to 32 mm when loaded with CGT tools TurboHone® tools: 3.81 to 32 mm when loaded with MMT tools Connecting rod tools: 53.8 to 63.8 mm when fitted with CRT tools Larger tools: 25.4 to 101.6 mm Workpiece²: 8 to 150 mm Max. Workpiece weight: 2.0 kg Spindle speed range: 250 to 3,700 rpm, adjustable Standard speed: High torque in the low speed range: 20 to 1,000 rpm, adjustable Stroke speed range: 33 to 500 H/min, adjustable Coolant system Pump motor: 0.18 kW Coolant pump: 5.6 l/min Coolant capacity: 132 l and 11.2 l/min Coolant requirements: Compressed air requirements: 566 l/min at 4.48 bar, 5.52 bar is recommended Temperature range: 0° to 35° C Floor space requirements: (concrete floor) At least 150 mm thick Machine dimensions: L 2946 mm x W 2971 x H 1829 Color: Pearl grey with pewter grey and burgundy decorative stripes Stand weight: 1,579 kg Noise emissions: < 71 dB (A) continuous load, < 75 dB (A) peak load Special features: Automatic set-up: spindle speed, stroke speed, stroke length, infeed value and sparking Automatic finishing: Standard Machine operating modes Automatic: Manual: Series production Individual production Clamping optional

Condition: used, functionality: fully functional, input voltage: 400 V, Precision Cross-Honing Machine Sunnen Eclipse EC-3500 CGM-27 used Bore diameter – honing range: 1.5 – 165 mm Stroke length – honing length: 6 – 170 mm Spindle speeds: 200 – 3,000 rpm Strokes: 60–500 strokes Total power requirement – spindle drive: 4.1 kW Reciprocation motor: 1.1 kW Machine weight approx. 1,200 kg SICK safety light curtain Horizontal cross-honing machine / honing machine type EC 3500 and operating manual Rodpfxjyx Dv He Alrou Inspection under power possible by prior appointment. Price on request All technical data subject to misprints/errors Sale exclusively to EU countries.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 50 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Z stroke : 150 [mm] - X stroke : 225 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 1.1 [kW] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 5 - X/Y stroke : 97/133 [mm] SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 6 [kW] WEIGHT & DIMENSIONS Rjdeuha Umspfx Alrou - Machine floor space : 1063/2033 [mm] - Machine height : 1666 [mm] - Machine weight : 1700 [kg] EQUIPMENT - CNC : CINCOM 18iTB - Coolant tank - Bar loader : IEMCA SMART 320

Condition: like new (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2D1-1116, total height: 1,905 mm, total width: 1,626 mm, total length: 1,219 mm, overall weight: 725 kg, For sale: as new, barely used, highly precise (±0.001 mm) automatic hole honing machine, sold together with numerous precision instruments, measuring devices, and extensive accessories for honing bores from D6 to D25 mm. The machine is connected to the power supply and ready for immediate operation. Rjdpoy E N R Nofx Alrou

Condition: excellent (used), honing diameter 1,5 - 165 mm stroke 80 - 160 mm spindle turning speed range 200 - 2500 U/min stroke speed - under load 80 - 310 Hub/min total power requirement 0,9 kW weight of the machine ca. 0,6 t Rsdpewva Rnjfx Alreu dimensions of the machine ca. 1,2 x 1,0 x 1,6 m

Condition: used, Year of construction: 1998, honing diameter 90 mm stroke 490 mm throat 400 mm total power requirement 10 kW weight of the machine ca. 3.500 kg Redpfx Aot Hw T Selrju dimensions of the machine ca. m

Condition: ready for operation (used), Year of construction: 2007, A vertical cross grinding machine Sunnen is available. Bore diameter range: 3mm-65mm, max. workpiece length: 250mm, working area dimensions X/Y/Z: 150mm/150mm/150mm, slide speed range: 0.001mm-0.8mm/s, stroke rate range: 30-400, spindle speed: 4000rpm, feed force: 3800N, grinding oil tank volume: 280l. Machine dimensions X/Y/Z: approx. 2150mm/2200mm/2900mm, weight: approx. 2200kg, operating hours: approx. 5000h. Including indexing table and grinding oil tank with magnetic separator and filter. Documentation available. An on-site inspection is possible. Rodpjy Ax Tnefx Alrou

Condition: used, SUNNEN ML2000 Honing Diameter Range: - Manual Stroking: 1.5 mm to 165 mm - Power Stroking: 1.5 mm to 102 mm Spindle Speed: - Infinitely variable from 200 to 3,000 RPM Stroke Rate: - 60 to 350 strokes per minute Automatic Sizing Range: - 3 mm to 51 mm Oil Tank Capacity: - 106 liters Pneumatic Requirements: - 5.5 bar Rsdpfx Aljyf N Adorsu Machine Dimensions: - Length: 1,600 mm - Width: 1,220 mm - Height: 1,900 mm Weight: - Approximately 725 kg

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Travel : 205 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 1 [°] GUIDE BUSH HOLDER 1 - Number of positions : 10 - Number of motorized positions : 4 - Live tools speed : 8.000 [rpm] SECONDARY OPERATION - Number of positions : 5 - Number of motorized positions : 3 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2.269 x 1.160 [mm] - Machine height : 1.693 [mm] - Machine weight : 1.800 [kg] Rodpfxsuwd Ryo Alrju EQUIPMENT - CNC : Mitsubishi MELDAS - Rotating guide bush - Parts catcher - Ejection of workpiece - Coolant tank - Bar loader : LNS Hydrobar Express 332 - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: refurbished (used), Honing machine SUNNEN ML3500 (like ml5000 ml2000 ec3500 ml 5000 ml 2000) this machine is currently under complete electronic retrofit (Siemens) Rodpfow Npt Rsx Alrsu Touch screen. Loader interface possible

Condition: refurbished (used), Honing machine SUNNEN EC3500 (like ml3500 ml5000 ml2000) Rodpfxophvk Ie Alreu SOLD - contact us for alternatives e.g. ML3500 o ML2000 complete electronic retrofit (Siemens / Telemecanique) Touch screen. Loader interface possible

Condition: excellent (used), Continuous rotary table HAU R60 - 1800, with 60 workpiece spindles, mounted in a pitch circle diameter of 1800mm, 3 polishing units with 7,5 kW each, polishing shaft diameter of 50 mm, width of polishing wheel 2 x max. 400 mm and 1 x 280 mm, diameter of polishing wheel s max. 420 mm, motorized longitudinal and height adjustment of polishing units, machine equipped with liquid compound feeding system Redom Nbubspfx Alrou More pictures on demand

Condition: used, Sunnen 1804 Honing machine, manual very good mech condition The machine can be seen working in our warehouse in Gussago BS. Test run possible Mimu Machine Tools Honing dia (min-max): 1.5-120 Rjdpfx Aljwpw A Iorou Honing length (max): 250