Boring bar buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
5
length 160 mm width 160 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Ovk8nhf2 This is an electromechanical 4-fold turret. On request, we will provide you with a data sheet. more
8

Boring Bar Unbekannt

Ennepetal, GermanyGermany
6422 km
good (used)
Boring bar 3640mm long Diameter 310mm Bcrdkpmitu Dead weight 1450kg more
4

Boring Bar

Willich, GermanyGermany dealership location
6368 km
used
diameter 110 mm quantity 3 Stück length 1100 mm C22y38fi tool adaptor total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
11
Dowel and drilling machine series GANNOMAT DRILL SUPER model 300 hinged very good condition, the machine has been used very little, it comes from a small installation company with all accessories: with fence holes of rows of 1900 mm long, with fence for trays 1500 mm long, with 6 fold-out attacks, with different setting gauges and with medium stop the stop ruler can both left and right are used best workmanship, quality materials and many good ideas make absolutely precise, accurate and eas... more
4
VDI 50 boring bar holder Form: E2 Dimensions: 50 x 32 Length: 90mm Manufacturer: Hoffmann group Condition: new The photographs are in good condition. Not every screw/coolant flow was checked by us on presence/function. The backing plate as shown in the pictures is partially not included! -multiple, available also in other forms -Discount for larger quantities You will receive an invoice with expelled VAT Prices are net and relate to a piece. Payment for new customers onl... more
2

Boring bar holder WNT 82 268 500 (E2-50x12)

Hornberg-Niederwasser, GermanyGermany dealership location
6626 km
as good as new (ex-display)
VDI: 50 mm Ba2vqmq9so 2 pieces available more
5
length 160 mm Vmb87p88r width 160 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m This is an electromechanical 4-fold turret. On request we will send you a data sheet. more
3

Boring bars

Korschenbroich, GermanyGermany dealership location
6375 km
used
995769 Boring bar MK 5 Diameter 45 mm = Length = 2150 (2300) mm Steel consumption d 16 mm Weight 27 kg = EURO 350,00 995770 Boring bar MK 5 Diameter = 63 mm Boxu8tkj Length mm = 1250 (1410) Steel shot 32 x 16 mm Weight 30 kg EURO 350,00 995772 Boring bar MK 5 Diameter = 63 mm Length mm = 2000 (2160) Steel consumption D. 21 mm Weight 48 kg EURO 350,00 Prices from stock, free truck + VAT more
3

Boring bar holder Miyano 7S780400

Hornberg-Niederwasser, GermanyGermany dealership location
6626 km
as good as new (ex-display)
Miyano BNC - 34 C 3 and BNC - 42 S 6 3 units available Fsrihykyq more


boring bar
daily

New machines via email!

Stay updated!
3
diameter 20 - 70 mm tool adaptor DIXI length 2-fach mm total power requirement kW weight of the machine ca. 0,01 t dimensions of the machine ca. m Boring bars from 20 to 70mm, for DIXI-machines. T481C (20-26; 80mm); T481L (20-26; 100mm); T482C (25-33; 100mm); Fldz2d8 T482L (25-33; 130mm); T483C (32-42; 125mm); T483L (32-42; 170mm); T484C (41-54; 150mm); T484L (41-54; 205mm); T485L (53-70; 235mm); T481L (53-70; 235mm); more
3

Boring bars

Korschenbroich, GermanyGermany dealership location
6375 km
used
995761 Boring bar 50 ISO DIN 2080 Diameter = 100 mm Length = 2500 (2630) mm Steel consumption D. 22 mm Weight 150 kg EURO 850,00 995766 Boring bar 50 ISO DIN 2080 Diameter = 100 mm Length = 1200 (1300) mm Steel consumption D. 25 mm Weight 80 kg EURO 550,00 995767 Boring bar 50 ISO DIN 2080 Diameter = 80 mm Length mm = 1100 (1290) Steel consumption D. 25 mm Yxzkv98d Weight 44 kg EURO 450.00 more
3
diameter 15 - 70 8-teilig mm tool adaptor MK 3 [...] M14 length - mm Nbwdv more
1
Boring bar with holder and coolant supply holder (L / W / H) = 340/295/150 mm Suitable for steels with shaft diameter 20 mm bar diameter 82 mm / length = 720 mm mounting diameter 120 mm - Overall length = 1,050 mm / 150 kg exchange bar bar diameter 82 mm / length = 620 mm mounting diameter = 120 mm - Overall length = 1,050 mm / 50 kg total weight of about 200 kg Mshw2w more
1
* 50 * ISO Diameter = 125 mm * Length = 2,480 (2,610) mm * steel seat D. = 40 mm * Weight: 230 kg Y028mypq more
1
* ISO 50 Die8o2w * Diameter = 100 mm * Length = 3,870 (4,000) mm * Steel recording d = 32 mm * Weight: 230 kg more
1
* ISO 50 * diameter = 80 mm * Length = 3.160 (3.290) mm * Steel Recording D. = 25 mm * Weight: 120 kg Cyrvhu more
1
* ISO 50 * Diameter = 100 mm Bysbt * Length = 3.155 (3.280) mm * Steel recording d = 32 mm * Weight: 190 kg more
4
21 piece various boring bars ISO 50 partial make KOYEMANN Bv7gj Diameter from 50 to 120 mm Lengths from 260 mm to 760 mm Total weight approx. 200 kg more
1

HORIZONTAL BORING MILL (HBM) KURAKI AKB-13

North Carolina, United StatesUnited States dealership location
518 km
2013
used
Elect./Voltage: Grt3kwx Kuraki AKB-13 Horizontal Boring Mill -- Table size: 70.87" x 78.74" -- Max. table capacity: 26,400 Lbs. -- Table indexing positions: 360 -- X-Axis travel (table cross): 118.11" -- Y-Axis travel (headstock vertical): 78.74" -- Z-Axis travel (spindle in/out): 62.99" -- W-Axis travel (saddle in/out): 27.56" -- Spindle diameter: 5.12" -- Spindle center to table: 78.74: -- Spindle taper: 50 -- Main spindle motor: AC 30/40 HP -- Tool changer capacity:... more
1

Drilling machines IBARMIA Spain SX 32

Babberich, NetherlandsNetherlands dealership location
6320 km
1996
ready for operation (used)
Technical data Ausladung400 x 420 mm Bohrleistung32 mm Drilling capacity in steel Ø32 mm Drilling capacity in casting Ø35 mm Thread cutter M18 Spindle retainer Mk3 Jcc3ban Spindle diameter Ø125 mm Spindelhub150 mm Maximum dista... more
7

boring mill Castel 2

Erftstadt, GermanyGermany
6409 km
1976
good (used)
Bc0cvdanhy more
4

bar automatic lathe TRAUB TK 42

Lüdenscheid, GermanyGermany dealership location
6444 km
1981
good (used)
- max. bar diameter 42 mm - turret with 6 stations Dmjaw9d - max. turning length 100 mm - 2 horizontal supports - 2 vertical supports - hydro feeding tube STENZEL dimensions LxWxH: - machine 2200 x 1200 x 1600 mm, weight 1800 kg - tube 5700 x 600 x 1200 mm, weight 500 kg more
5

Table Type Boring and Milling Machine COLLET BFf 85

Mönchengladbach, GermanyGermany dealership location
6371 km
1966
used
spindle diameter:100 mm x-travel:1000 mm y-travel:1000 mm spindle stroke:710 mm z-axis:900 mm table surface area:1000 x 1120 mm spindle turning speed range:8 - 1600 U/min spindle taper ISO:40 total power requirement:20 kW Tyea9brca weight of the machine ca.:15 t dimensions of the machine ca.: m with digital readout diverse toolholders more
1

BORING MILL NOMURA B-100-SP

North Carolina, United StatesUnited States dealership location
518 km
used
Elect./Voltage: Xzr7du2 4" NOMURA B-100-SP Table Type Horizontal Boring Mill --Spindle Diameter, Main 4" --Spindle Taper#50 --Spindle Travel, Main (W-Axis)26" --Table Cross Travel (X-Axis)72" --Spindle-Head Vertical Travel (Y-Axis)50" --Saddle In/Out Travel (Z-Axis)43" --Table Dimensions (Overall) W X L 48" X 79.5" --Spindle Speeds, Range 21 To 1200 Rpm --Feed Rate, Range.040 To 100 IPM --Power Rapid Traverse 130 IPM --Spindle Motor Horsepower 15 Hp --Feed Motor Horsep... more
5
Maximum blade diameter: 350 mm Cp8k7fly Length stop and roller conveyor on request more
5
spindle diameter:130 mm x-travel:8000 mm y-travel:2000 mm W-axis (spindle longitudinal):800 mm 3ulkf0eex z-travel:380 mm number of spindle speeds:max. 900 U/min. drill spindle feed:900 mm feed:5-2000 mm/min tool taper:SK50 total power requirement:40 kW weight of the machine ca.:42,2 t dimensions of the machine ca.:15000 x mm plate size:1 x 2250 x 2815 x 360 mm clamping plate:1 x1750 x 3500 x 340 mm more
3

Table Type Boring and Milling Machine SACEM MST 110/AC

Mönchengladbach, GermanyGermany dealership location
6371 km
1980
used
spindle diameter:110 mm Ughcrdixp x-travel:3000 mm y-travel:1600 mm z-axis:1600 mm spindle stroke:900 mm table-size:2000 x 1600 mm table load:8 t spindle turning speed range:6 - 1200 U/min feed speeds:3 - 2500 mm/min rapid traverse:3 m/min spindle cone ISO:50 total power requirement:25 kW weight of the machine ca.:28 t dimensions of the machine ca.:6,5 x 5,1 x 4,6 m with DRO HEIDENHAIN TNC 121 point to point control ball screws, telescopic covers more
1

BORING MILL CONVENTIONAL GIDDINGS & LEWIS 70-G5-T

North Carolina, United StatesUnited States dealership location
518 km
1970
used
Elect./Voltage: Bbvsy9jtza 5” G & L 70-G5-T TABLE TYPE HORIZONTAL BORING MILLSpecifications: -- 5” Spindle Dia. -- 48” x 72” Table. -- 60” X-Axis Travel. -- 60” Y -Axis Travel. -- 36” Z-Axis Travel, Spindle. -- 34” W Travel, Saddle. -- No. 50 Spindle Taper. -- Hard Ways. -- Dro. -- Full Pendent Controls. -- 25 Hp. Motor With Electrical Controls.5” G & L 70-G5-T TABLE TYPE HORIZONTAL BORING MILL more
6
Cutting height: 32 mm Cutting length: 44 mm Gfwn7gp Cut 2 strips at the same time Saw blades cut at a 45 ° angle Pneumatic blade feed more
6
spindle diameter 203,2 mm x-travel 9000 mm y-travel 3500 mm milling spindle diameter 335 mm spindle taper ISO 60 spindle turning speed - stepless 1 - 450 / 5 - 1200 U/min w-axis 800 mm z-axis 1500 mm 2300 mm rapid traverse X-axis 8000 m/min rapid motion - y-axis 6000 mm/min Rapid motion z/w 4000 mm/Min. Feed column (X-axis) 1 - 8000 mm/min. Infeed z/w 1 - 4000 mm/Min. Feed head stock (Y-axis) 1 - 6000 mm/min. dimension of the ram 530 x 600 mm engine output 75 kW dimensions 15 x 5,5 m The ho... more
6
spindle diameter 110 mm x-travel 3000 mm y-travel 1530 mm z-travel 2100 mm bore spindle stroke 800 mm table surface area 1260 x 1400 mm spindle taper ISO 50 spindle turning speed range 6 - 1200 U/min feeds 3 - 2500 mm/min rapid traverse 3 m/min Uqv229lk2 control HEIDENHAIN TNC 131 spindle drive 18 kW total power requirement 28 kW weight of the machine ca. 29 t dimensions of the machine ca. 6,49 x 5,15 x 4,37 m Accessories: facing chuck more
2

Table Type Boring and Milling Machine SCHARMANN FB 80

Mönchengladbach, GermanyGermany dealership location
6371 km
1961
used
spindle diameter:80 mm x-travel:1000 mm Tephbfcmc y-travel:710 mm faceplate diameter:500 mm spindle taper MT:5 total power requirement: kW weight of the machine ca.:12 t dimensions of the machine ca.:5,0 x 3,0 x 3,0 m 3-axes digital readout more
1

BORING MILL BERTHIEZ JD-9340

North Carolina, United StatesUnited States dealership location
518 km
used
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Bbvs2cb2fh 71/114" BERTHIEZ "JD-9340" Openside Vertical Boring MillSpecifications:Table Diameter 71"Swing, Maximum 114"Height Under Rail, Maximum 65"Table Load Capacity 2.5 Rpm 33000 LbsTable Load Capacity 125 Rpm 2200 LbsSide Head Vertical Travel 32"Table Travel 24"Table Speeds, Range 4 To 125 RpmMain Motor, Horsepower 40EQUIPPED WITH:71" 4-Jaw T-Slotted Table(1) 5-Station Turret-Head (Swiveling-Type)(1) Side-HeadPendant Control71/114" BERTHIEZ "Jd-93... more
6

Jig Boring Machine IXION PC 2-4/BT 23 AVST-G

Bünde, GermanyGermany dealership location
6460 km
1996
used
spindle diameter 40 mm x-travel 470 mm y-travel 200 mm table load 100 kg Boring power 28/23 mm spindle taper MK 3 spindle turning speed range 160 - 2800 U/min bore depth 120 mm throat 260 mm Table dimensions 800 x 240 mm rapid travel - longitudinal/face 6 m/min thread capacity M 20 total power requirement 3 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 2 x 1,5 x 1,8 m Electric 380 Volt Cooling equipment Coordinate table 800 x 240 mm Drilling and tapping machine on b... more
6
Workshop crane manually hydraulic MK S 1500 / P DW not used, year of constr. 11/2016 very good industrial quality max. capacity 1500 kg hydraulic pump hub / lift 650 mm max boom height ex OK ground ca. 3100 mm double effect hydraulic pump for faster lifting robust hydraulic / lowering speed fine adjustable hydraulic with safety return spring parallel running gear for driving round pallets ideal for installation and removing of motors crane boom with 4 adjustment possibil... more
3
spindle diameter 96 mm x-travel 1200 mm y-travel 800 mm z-travel 935 mm Psvxb9lj table-size 950 x 1150 mm spindle taper ISO 50 table load max. 3 t turning speed range - facing chuck 11 - 800 U/min spindle drive 11 kW feeds longditudinal/cross/vertical 2 - 1200 mm/min rapid traverse 4,5 m/min total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Accessories: facing chuck more
4
spindle diameter:160 mm x-travel:7000 mm Caetgfh2m y-travel:3500 mm z-travel:1000 mm w-axis:900 mm rotary table::2500 x 2000 mm table load:ca. 20 t table adjustment - longitudinal:1000 mm b-axis:360 ° spindle taper ISO:50 spindle turning speed - stepless:2 - 2000 U/min feed speeds infinitely variable:1 - 5000 mm/min rapid traverse:z-16, x-y-w- 20 m/min total power requirement:125 kW weight of the machine ca.: t dimensions of the machine ca.:13,2 x 12,8 x üF 6,0 m new in 1993 retrofitted in 20... more
1

BOILER, BIOMASS-FIRED BARKER 600 HP

North Carolina, United StatesUnited States dealership location
518 km
2011
used
Elect./Voltage: 208-220/440, 60 Cy, 3 Ph. 7b9harqp BARKER Boiler and Fuel System built & tested in 2011 as a pilot unit. Successful testing has been completed. This surplus equipment includes the following main features: -- Combustion Temp Capability- 2,000 [...]; Steam Flow 24,000 lbs/hr saturated; Steam Pressure 1,500 PSI 600 deg. F. -- Fuel Feed rate - 3,000 Lbs/hr at 1/4" biomass (5% moisture) -- Heat Input - 7,500 btu/Lbs HHV 22 mmbtu/hr. -- All equipment has less than 2,500 act... more
9

Bar code reader SICK CLV431-2010

Varberg, SwedenSweden dealership location
6455 km
2010
as good as new (ex-display)
All units has been in production for 2 years, then put in storage, as new condition. SICK barcode reader system: 7 units CLV431-2010 bar code readers 8i0tuyi2q 7 units CDM420-0001 control boxes 6 units (+1 unit brand new in carton) KEYENCE RGB Digital Fiberoptic Sensor CZ-K1(P) Series Computer, software, Manuals Can ship worldwide! more
2

BAR FEEDER IEMCA KID80 SHORT MAGAZINE BAR FEEDER

West Lothian EH54 9HW, United KingdomUnited Kingdom
5581 km
2011
good condition (used)
2011, s/n 021140QA01, capacity 5 to 80mm dia bar. Lengths 90 to 1,615mm, Weight 500kgs Bczkwi9btl more
3

Table Type Boring and Milling Machine AYCE

Bühl, GermanyGermany dealership location
6593 km
1980
used
spindle diameter 80 mm x-travel 1600 mm Up2rccfcp y-travel 1000 mm z-travel 1500 mm table-size 1150 x 1000 mm spindle taper MT 5 Boring depth max. 600 mm turning speed range 12 - 1000 U/min feeds 0,04 - 1,38 mm/U total power requirement 5,5 kW weight of the machine ca. 7,8 t range L-W-H 5,30 x 2,90 x 2,54 m acc.: DRO on X- and Y-axis more
4
spindle diameter:70 mm x-travel:800 mm y-travel:800 mm z-axis:1200 mm table-size:1000 x 800 mm spindle taper: MT:5 spindle stroke:300 mm feeds:0,028 - 12 mm/min spindle turning speed range:7 - 1350 U/min faceplate diameter:500 mm faceplate speeds::7 - 135 spindle motor:5 kW Bqmbnjvk voltage:500 V weight of the machine ca.:8 t total power requirement:7 kW dimensions of the machine ca.:5 x 2,3 x 2,5 m The machine was used in a training school and generally overhauled in 2008! - facing head - ... more


boring bar
daily

New machines via email!

Stay updated!

to

to

Edit search
BORING BAR
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close