Boring machine buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
5
Line boring machine table drill spindle taper B10 Table size 770 x 300 mm max interim measure mm-200 mm projection speeds 250-4000/365-4150 U / min spindle stroke 100 mm Dimensions 960/970/H1600 mm Weight 510 kg It0amtdp more
5
thread capacity NA thread pitch NA mm throat 200 mm 8l83o3hx9 bore diameter M 8 mm bore depth 50 mm control Wechselräder stroke 50 mm total power requirement 0,5 kW weight of the machine ca. t dimensions of the machine ca. m Automatic Tapping Machine as Pillartype, Gears, Coolant more
6
workpiece size 1,550 x 2,400 mm housing treatment - size 1,600 x 1,050 mm Bqdmt3en chamfering height of housings max. 70 mm sheet thickness 2 to 10 mm CNC control LENZE tool holder ISO 30 / DIN 69871 tool changer 12 tools tool diameter 1 to 20 mm milling speed max. 2,000 mm / minute with 3 mm tool spindle speed max. 18,000 rpm compressed air requirement 6 to 8 bar / 300 l/min electrical data 400 V / 7.5 KW space requirements width - 3,490 x depth - 2,500 x height - 2,350 mm weight ... more
4
spindle diameter:100 mm x-travel:1000 mm y-travel:1000 mm spindle stroke:710 mm z-axis:900 mm table surface area:1000 x 1120 mm spindle turning speed range:8 - 1600 U/min spindle taper ISO:40 total power requirement:20 kW weight of the machine ca.:15 t Tyea9brca dimensions of the machine ca.: m with digital readout more
6
spindle diameter 125 mm x-travel 1120 mm y-travel 710 mm w-axis 630 mm z-axis 315 mm table surface area 900 x 1400 mm table load 2000 kp feed range - boring 0,025-2,24 mm/U turning speed range n:20 36-2240 U/min rapid travel z-direction 2500 mm/min rapid travel w-direction 1400 mm/min electrics - voltage/frequency 380/50 V/Hz spindle taper SK 45 total power requirement 11 kW weight of the machine ca. 9 t dimensions of the machine ca. 3,9 x 2,6 x 2,9 m Ljiyd - 2-axis DRO - exhauster - vario... more
2
thread capacity M6 thread pitch 0,5 / 0,7 mm threading depth 30 mm throat 125 mm table-size 320 x 200 mm spindle turning speed range 710 - 2800 U/min quill stroke 30 mm spindle taper BT 12 voltage 380 V total power requirement 0,44 kW Clk3ewxfs weight of the machine ca. 70 kg dimensions of the machine ca. 0,30 x 0,50 x 0,60 m - Serial-No.: 50111 - pitch 0,6 + 0,7 - Double spindle head more
5
Drive 1.5 Kw -2870 rev / min-pneumatic clamping table rigidly Ideal for Long-components X axis 220 mm Weight 200 kg 2wykwzqp more
1
Second-hand machine various Knothole boring machines Bäuerle with 3 spindles / feed Mpyg9 Foot operated more
3
-Drill head with 3 fittings and 3 series drills -Motor 0.75 kW / 400 V -Stop system -Base, mobile (self-made) Bahu8uz0rd -CE compliant more
3
spindle diameter:110 mm x-travel:3000 mm y-travel:1600 mm Ughcrdixp z-axis:1200 mm spindle stroke:900 mm table-size:2000 x 1600 mm table load:8 t spindle turning speed range:6 - 1200 U/min feed speeds:3 - 2500 mm/min rapid traverse:3 m/min spindle cone ISO:50 total power requirement:25 kW weight of the machine ca.:28 t dimensions of the machine ca.:6,5 x 5,1 x 4,6 m with DRO HEIDENHAIN TNC 121 point to point control ball screws, telescopic covers more


boring mac...
every day

New machines via email!

Be informed!
6
"Machine dowel hole boring machine manufacturer Scheer type DB 5 year 1994" Aggregate swivel Yes drill unit Yes drill unit 21 spindles Division 32 mm stroke 80 mm cylinder 2 piece motor 2,2 kW connection 380/50 Volt / Hz machine dimensions: Length 1300 mm weight 300 kg drill Cabinet height 1300 mm width 900 mm with many drill Location: Off the shelf 54634 Bitburg Mqzrd222 more
5
Drive 1.1 Kw -2810 rev / min-eccentric clamping sleeve travel 140 mm X-axis 300 mm Z-axis 200 mm Weight 340 kg 8x93m9 more
6
Ugykh38fType: Basica Standard Machine used head for fitting hinges Grass head for hole number Year of construction: 1998 Location: Warehouse / 82281 Herrnzell more
6
x-axis: längs/ longitud. Tisch/table 1800 mm y-axis: quer / transverse 1500 mm z-axis: Hub / stroke 400 mm W-axis (spindle longitudinal): 500 mm distance between columns: 1560 mm distance between table/spindle: min:100 mm distance between table/spindle: max:1400 mm sleeve diameter: außen/ exterior 200 mm tool taper: SK 50 clamping surface area: 1400x2240 mm number of T-slots: 9 (22H7) table height over floor: 950 mm range drill spindle revolution per minute: 18-1800 U/min range of revolution... more
6
spindle diameter 150 mm x-travel 3000 mm y-travel 2000 mm z-travel 1600 mm w-axis 700 mm b-axis 360.000 x 0,001 ° rapid travel x/y/z 10000 mm/min spindle turning speed range 10 - 2500 U/min Qw90mq8at no. of tools in the magazine 80 Stück table-size 1600 x 2000 mm table load 12,5 t spindle motor 52 kW control SIEMENS 850M total power requirement 100 kVA weight of the machine ca. 34 t dimensions of the machine ca. 11,5 x 8,2 x 4,6 m - CNC control SIEMENS Sinumeric 850 M for 7 axis. Z-axis (co... more
5
length 160 mm width 160 mm total power requirement kW Ovk8nhf2 weight of the machine ca. t dimensions of the machine ca. m more
5
thread capacity 16/20 mm throat 205 mm quill stroke 60 mm column diameter 98 mm spindle taper MK 2 spindle turning speed - stepless 140-900 U/min distance spindle/table min./max. 210-600 mm Table dimensions 315 x 350 mm engine output 1,1/1,47 kW weight of the machine ca. 260 kg dimensions of the machine ca. 0,45 x 0,58 x 2,14 m Condition: ready for operation Condition: good Desk stand Cooling equipment 9 Stück Pitch handicap about leading-patrons, adjustment of the cycles: test, man... more
5
Mortiser, Slot Mortiser br / br / br -drive kW / speed U / min br / br -Exzenter clamping / -X axis 250 mm br / -Y axis 205 mm br / -Z axis 200 mm br / milling cutter consumption max 20 mm br / -dimensions 1250/900 / H1200 mm br / weight 470 kg Dyxr0b098 more
4
spindle diameter:130 mm x-travel:3500 mm y-travel:2000 mm w-axis:1250 mm spindle stroke:800 mm table-size:1800 x 1600 mm table load:12 t spindle taper ISO:50 spindle turning speed range:1 - 1000 U/min feed range:1 - 3000 mm/min 2eitcpv7u total power requirement:50 kW weight of the machine ca.:35 t dimensions of the machine ca.:7,5 x 7 x 5 m with CNC HEIDENHAIN TNC 360 angular milling head spindle support bearing angle plate telescopic covers many accessories more
4
spindle diameter: 90 mm x-travel: 1000 mm y-travel: 1000 mm z-travel: 1600 mm B-axis (table): 360° mm drill depth: 700 mm table load: 2,5 t table-size: 1000x1120 mm tool taper: Frässpindel ISO 60 tool taper: Bohren MK5 / DIN 228+1806 spindle speed max.: 8-1600 U/min feed: 0,8 - 2000 m/min total power requirement: 18 kW weight of the machine ca.: 9,2 t machine dimensions LxWxH: L5,6XB3,2xH2,7 m dimensions electric cabinet: :0,8x0,8x2,0 mm Table Type Boring and Milling Machine with face plate! Equ... more
6
x-travel mm y-travel mm z-travel mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Hierbei handelt es sich um einen elektromechanischen 4-fach Revolverkopf. 3js03xgq2 Aufspannplatte 245 x 285mm. Genaue Type: L1897 01.067 0104.68. 25.5.84 Type 0374.78.700/1 VDI 34. Der Revolverkopf war auf einer EMAG Maschine als linker Stahlhalter im Einsatz. more
4
spindle diameter 150 mm x-travel 2000 mm y-travel 1600 mm z-axis 1000 mm spindle stroke - max. 850 mm table surface area 1250 x 1600 mm table load 8 t spindle taper ISO 50 Qw9unznp9 spindle turning speed range 4 - 1120 U/min feed 5 - 3999 mm/min main drive motor 46 kW rapid traverse 8 m/min control FIDIA C2 total power requirement kW weight of the machine ca. 30 t dimensions of the machine ca. 7 x 5,5 x 5,1 m retrofitted with FIDIA C 2 control in 1999, update and new hardware for WINDOWS... more
5
Dowel boring machine, Dübelbohrautomat, drilling and dowel station, hole line Drilling machine br / br / -Drive 1.5 / 2.0 kW br / Drills speed 2200/4400 U / min br / -pneumatic workpiece clamping br / -15 drills Angle grid 32 mm br / -Bohrkopf pivotally br / br footswitch / -Bohrtiefe max 185 mm br / -Höhenverstellung max mm br / -max clamping height 110 mm br / -dimensions 950/1100 / H1350 mm br / -weight 616 kg br / X38m0kqh3 more
3
spindle diameter:130 mm x-travel:2500 mm y-travel:1250 mm table-size:2200x1800 mm spindle stroke:800 mm spindle turning speed range:10 - 3000 U/min Bhq3odhu weight of the machine ca.:40 t rapid feed:9000 mm/min Motor power:70 kw feeds::4 - 3000 mm/min. max. table loading capacity:12000 kg spindle taper:ISO 50 spindle travel:800 mm cross travel of table:3500 mm automatic tool changer:40 Stück Used Table Type, Brand TOS, Type WHQ 13 Warranty: none more
5
drilling capacity diameter max.: 170 mm table length: 1000 mm table width: 400 mm throat: 200 mm Fhbe092p vertical adjustment: Spindel/Spindle=ca.590 mm automatic feeds: ja /yes revolution per minute: [...] U/min longitudinal travel: 860 mm cross travel: 60 mm total power requirement: 2,0 kW weight of the machine ca.: 1,7 t space requirement of the machine approx.: L:1,6x1,15xH:2,4 m Deep-Hole Drill-and Milling Machine for cylinder heads and motors with cross slide table and device for motorblo... more
6
spindle diameter 130 mm x-travel 3000 mm y-travel 2000 mm z-travel 1600 mm w-axis 700 mm table-size 1800 x 1600 mm spindle turning speed range 10 - 2500 U/min tool taper ISO 50 Control Heidenhain 426 PB workpiece weight 10 t spindle drive 27,5 kW B-axis (table) 90 ° total power requirement 44 kW weight of the machine ca. 26 t equipped with: - 5-axis Heidenhain TNC 426 PB CNC Control - Siemens Motors - ATC for 40 Tools - chip conveyor - through the Spindle Coolant Mv27p - low Pressure Pump... more
5
length 160 mm width 160 mm Vmb87p88r total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
6
Fitting boring machine /Fitting drilling machine RUCHSER RU-BES Wkazj7kd0 year of construction 1995, very good condition! 2 spindles with machine tools assembled 3 foot pedals machine is mobile on rolls more information on request more
5
Machine bed length 3000 mm with extension rods 4000 mm insertion length 2400 mm Bohrspindeldrehzahl 1900 U / min-footswitch-stop system dimensions 3000/750/H1650 mm Weight approx 350 kg 3aljr3iv more
5
spindle diameter:130 mm x-travel:3500 mm y-travel:2500 mm table-size:1600 x 1800 mm spindle stroke:2500 mm spindle turning speed range:10-1500 U/min max. table load:12000 kg Motor power:37 kw Mdc8h automatic tool changer:60-fach Used Table Type, Brand TOS, Type WHQ 13.8 Warranty: none more
5
spindle diameter 120 mm x-travel 2000 mm y-travel 1600 mm z-travel 600 mm w-travel 1000 mm taper bore ISO 50 tool taper ISO 60 column travel 1000 mm table height 1000 mm rotation 4x90 ° 9ulpnekvg surface area 1250 x 1600 mm workpiece weight 6000 kg T-slots 7 T-slot - distance 170 mm power capacity 45 kW turning speeds 1600 U/min electrics - voltage/frequency 380/50 V/Hz total power requirement 71 kW weight of the machine ca. 21 t dimensions of the machine ca. 4,8 x 4,7 x 4,2 m CNC Control ... more
5
x-travel:850 mm y-travel:630 mm z-travel:500 mm table-size:1200 x 560 mm table load: t control:Heidenhain TNC 415 tool adaptor:SK 40 7bfpnsbza turning speed range:25- 4200 U/min rapid speed:10 m/min feed speeds:1- 5000 mm/min power requirement:12 kW quill stroke:95 mm dimensions:4,26 x 4,4 x 2,3 m weight of the machine ca.:4,5 t CNC- univers. milling machine Hermle - extern. handweel - full cover more
6
spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1250 mm z-travel: 800 mm w-axis: Bohrspindel /drill spindle 0-630 mm B-axis (table): 360° mit 0,02° Teilg. mm control: Heidenhain TNC 320 table surface area: 1250 x 1600 mm table load: 8 t number of revolutions per minute of drill spindle:: [...] U/min revolution per minute: Frässpindl 5-1400/4Stufen U/min revolution per minute: stufenlos / continuous U/min feed continuous: siehe Anlagen Text electrics - voltage/frequency: 380/50 V/Hz total p... more
6
spindle diameter 160 mm x-travel 4500 mm y-travel 3000 mm spindle taper ISO 50 spindle turning speed range 3 - 850 U/min ram-type - ram dia. 440 mm ram stroke 550 mm main drive motor 63 kW Feed motor 11,5 kW boring spindle diameter 160 mm milling spindle diameter 260 mm Control Siemens 840C drilling depth in one stroke 915 / 1565 mm spindle turning speed range 3 - 340 / 850 U/min Pszpxi max. torque on the spindle 55 NM rapid travel x/y/z 4000 / 3000 / 4000 mm/min z-axis 934 mm w-axis 550 mm b... more
5
spindle diameter 63 mm x-travel 650 mm 7338b7fc0 y-travel 600 mm z-travel 750 mm table surface area 650 x 800 mm table load capacity 2000 kg tool taper ISO 40 quill adjustment 400 mm turning speed range - spindle 33 - 1500 U/min feeds x/y/z 16: 0,015 - 3 mm/U rapid traverse 2500 mm/min Drive 5,5 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 3,3 x 1,8 x 2,1 m Condition: ready for operation Electric 380 Volt Hardened guidance pathes Autom. tool collection Hanging pan... more
4
spindle diameter:130 mm x-travel:2500 mm y-travel:1600 mm z-axis:1250 mm w-axis:700 mm spindle drive motor:35 kW spindle taper ISO:50 spindle turning speed range:10 - 3000 U/min 8yjhcfjhe feeds:10 - 3000 mm/min rapid traverse feeds:10000 mm/min table surface area:2000 x 1600 mm table load:12,5 t total power requirement:50 kW weight of the machine ca.:30 t dimensions of the machine ca.:7,5 x 7,0 x 4,2 m Machine complete retrofit and overhould with new HEIDENHAIN iTNC 530 control, swichting cab... more
6
spindle diameter 130 mm x-travel 2500 mm y-travel 1600 mm z-travel 1000 mm w-travel 1000 mm table surface area 1600x2000 mm table rotation 360 ° table load capacity 12500 kp speeds - bore + milling spindle 3,55-1000 U/min turning speed range - faceplate 3,55-250 U/min main drive motor 20 kW taper in boring spindle ISO 50 radial face slide travel 280 mm feed - spindle and radial slide 0,03-2,8 mm/U rapid traverse 4 m/min weight of the machine ca. 30 t dimensions of the machine ca. m K3mq2 g... more
5
x-travel:600 mm y-travel:500 mm z-travel:450 mm control:Dialog 11 turning speed range - main spindle:31,5-5.000 U/min power capacity - main spindel:7,5 kW tool taper:SK 40 table surface area:Ø 500 mm Tool-Presetter::30 Stück feeds:: 9qyoqz3hh rapid travel ( X / Y / Z ):6 m / min. m/min weight of the machine ca.:4,3 t dimensions of the machine ca.:3,5 x 2,4 x 2,2 L/B/H m Universal Milling- and Boring Machine - full covered - coolant system - NC- rotary table - tool changer more
6
boring spindle diameter: 130 mm x-axis: 3200 mm y-axis: 2500 mm z-axis: 1500 mm b-axis: 360 ° w-axis: 750 mm U-axis: 220 mm control: Siemens 840 D tool taper: SK 50 revolution per minute: 2,5-280 Plansupport U/min range of rpm - spindle: 5-3000 U/min clamping table: 1600x2000 mm feed speeds: Z/Y/W , [...] mm/min rapid traverse : Z/Y/W , 15 m/min max. torque on the spindle: 2415 Nm weight of tools max.: 25 kg tool changer with: 60 Plätzen/place table load: 6,5 t coolant device: IKZ / CTS total po... more
3
Type: blue max mini Machine used head for fitting hinges Hettich Year of construction: 1996 2l7ieyiks Location: Warehouse / 82281 Herrnzelll more
6
spindle diameter 110 mm x-travel 3000 mm y-travel 1530 mm z-travel 2100 mm bore spindle stroke 800 mm table surface area 1260 x 1400 mm spindle taper ISO 50 spindle turning speed range 6 - 1200 U/min feeds 3 - 2500 mm/min rapid traverse 3 m/min control HEIDENHAIN TNC 131 spindle drive 18 kW total power requirement kW weight of the machine ca. 29 t dimensions of the machine ca. m Uqv229lk2 Accessories: facing chuck more
5
Line boring machine, drilling machine, drill press, Pillar drill, drill press -Spindelaufnahme MK4 -Tischgrösse 400 x 900 mm -max interim measure mm unloaded 310 mm -Drehzahlen 60-1250 U / min -Spindelhub 180 mm -drive about gear -Vorschub 0.03 to 0, 40 mm / rev -Dimensions 1200/1130 / H2400 mm -Weight 1700 kg Fb3j9gp more
5
Boring power 2,5-18 mm bore depth 700 mm control SIEMENS 840D Table dimensions 700 x 1375 mm turning speeds 1000-10000 U/min total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 5,7 x 2,8 x 2,5 m 2-spindle deep hole drilling machine for long workpieces. + Siemens 840 D - colour-flatscreen with text display - Dialog programming - graf. condition control (Easy Mask) + tool supervision + internal cooling Ewabb3p + cooling unit 100 bar + coolant pressur... more
4
CNC universal - milling & drilling machine lid MAHO DMU 50 T With train control HEIDENHAIN TNC 430 Year of construction: 2000 Traverse paths: X 500 Y 400 Z 400 Speed range: 20-9,000 rpm infinitely variable With the following accessories: Manual swivel - round table with digital display for C + B-axis 700 mm x 500 mm clamping surface Vertical tool changer with 16 magazine pockets Baenr9288f Mode 3 + 4 Electronic Handwheel Full cab with interior lighting 4 PCs. height-adjustable mo... more
5
x-travel 650 mm y-travel 400 mm surface area 760 x 400 mm T-slot 4 x 760 x 16 quill stroke 180 mm tool taper MK 4 total power requirement 2,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. m Cif7tloe0 more
5
Machine used Joi0b7w Type: RB110 23 spindles Year of construction: Location: Warehouse / 82281 Herrnzelll more
3
spindle diameter 96 mm x-travel 1200 mm y-travel 800 mm z-travel 935 mm table-size 950 x 1150 mm spindle taper ISO 50 table load max. 3 t turning speed range - facing chuck 11 - 800 U/min spindle drive 11 kW feeds longditudinal/cross/vertical 2 - 1200 mm/min Psvxb9lj rapid traverse 4,5 m/min total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Accessories: facing chuck more
5
Drilling machine, Dübelbohrautomat, drilling and dowel station, rows of holes dowel drill drive 2.2 kW pneumatic workpiece clamping -21 drill from below 32 mm bore head swiveling foot switch-depth max 80 mm height adjustment up to 80 mm Dimensions 1300/1200 / H1400 mm Weight 450 kg Hi2phyz7a more


boring mac...
every day

New machines via email!

Be informed!

to

to

Change search
BORING MACHINE
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close