Used Coordinate Boring Machine for sale (91,544)

Condition: used, workpiece weight (max.): 5,000 kg, Two-column coordinate boring machine CNC Manufacturer: Mikromat WMW Type: CBKoZ 1400x2240/2 Control: Siemens 840D (installed approx. 1997) Cedpfx Ajvuhu Tjh Usri Space required: 7000 x 6500 x 5300 mm (LxWxH) Weight: 22,500 kg incl. - tool holders shown - extensive documentation. For further information, see attachments. The machine can be tested/demonstrated on site under power. Freight basis: From location, without dismantling The buyer must dismantle and load the machine himself. A 10-ton bridge crane is available for this purpose, which was also used to assemble the machine at the time. Further assistance and the use of a forklift truck may be possible by arrangement. All information without guarantee. Subject to prior sale. The object of purchase is sold without any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of duties by the seller or for any injury to life, body or health.

Condition: good (used), Year of construction: 2006, machine/vehicle number: 185078, Offer 24435 Technical data: Cedpfx Aeur H Ehoh Ujri - Table surface 1700 x 550 mm - manual travel X / Y 1300 x 500 mm - MAXION drilling machine, type: BT 15 GL - Drilling capacity up to 18 mm - Tapping device up to M 10 - Drill spindle holder MK 2 - Drill spindle stroke with drilling depth fine adjustment 90 mm - Pneumatic feed unit PV 12 - throat depth 670 mm - 4 spindle speeds 320 + 560 + 1000 + 1600 rpm - mot. Stroke of the drilling unit - Table clamping x + y - Minimum quantities Lubrication - Pneumatic connection 6 bar - 400 V connection - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg - various guide cartridges

Condition: excellent (used), Henri Hauser M5 DR jig boring machine spindle diameter 90 mm x-travel 700 mm y-travel 500 mm Drilling capacity in steel 40 mm spindle mounting MK 4 drilling spindle stroke 170 mm number of spindle revolutions 2 infinitely variable 10-2000 rpm Boring diameter max. 230 mm Table dimension - longitudinal 900 mm Table dimension - crosswise 770 mm Vertical travel of cross beam 630 mm Drilling spindle 6 pieces from/to 0.02-0..20 rpm Clearance between uprights 900 mm Passage between spindle and table 815 Spindle motor 4.0 HP Total power requirement 380 V Machine weight approx. 3.9 t Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines Crodpfxsg Ibuxj Ah Uei Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 120 rpm, table length: 550 mm, table width: 320 mm, spindle mount: MK 2, total height: 1,500 mm, total length: 1,400 mm, total width: 2,100 mm, rotational speed (min.): 120 rpm, rotational speed (max.): 3,000 rpm, drilling capacity: 75 mm, distance between stands: 600 mm, spindle motor power: 551 W, For sale is a Hauser brand coordinate drilling machine of type OP3 The machine is ready for use and fully functional Technical data: Csdpfx Aovzrx Noh Ueri HAUSER OP3 coordinate drilling machine Table: 550 x 320 mm Longitudinal travel: X-axis 400 mm Cross travel: Y-axis 250 mm Vertical travel: Z-axis 400 mm Cone in the spindle: MK 2 Drilling capacity in steel: 20 mm Stroke of the drilling spindle Z-axis: 130 mm Bore diameter: max. 75 mm Distance from table to spindle: 600 mm Spindle speeds: infinitely variable: 120- 3000 rpm Feed rates: Drill spindle slide: Number (steps) 2, 0.03 mm/rev 0.06 mm/rev Spindle motor: 0.75 HP Machine weight: approx. 1500 kg Dimensions: 1400x1500x2100 Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewings possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: good (used), Year of construction: 2006, machine/vehicle number: 860027, Offer 24331 Technical data: - Table surface 1700 x 550 mm - manual travel X / Y 1300 x 500 mm - MAXION drilling machine, type: BT 18 STP - Drilling capacity up to 18 mm - Tapping device up to M 16 - Drill spindle holder MK 2 - Drill spindle stroke with fine drilling depth adjustment 76 mm - Pneumatic feed unit PV 12 - throat depth 670 mm - Spindle speeds 100 - 1800 rpm - 200 - 3600 rpm - mot. Stroke of the drilling unit - mot. Table clamping x + y Csdju Aqz Aopfx Ah Usri - Minimum quantities Lubrication - Pneumatic connection 6 bar - Connection 400 V - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg

Condition: new, Part Number M0297 – For custom furniture manufacturing – Drilling horizontally, vertically, and at an angle in wood-based panels and solid wood – 1500mm fence frame – Complete set of spacers included – Brand new machine TECHNICAL DATA - Number of spindles: 23 - Distance between spindles: 32mm - Total center-to-center distance: 704mm - Maximum tool diameter: 40mm - Maximum drilling depth: 65mm - Max. workpiece size: 740 x 3000 x 200mm - Height of worktable: 860mm - Worktable dimensions: 949 x 350mm Crjdpfx Aoxbzkwjh Usi - Drilling head tilt: 0-90° - 2 independent pneumatic cylinders - Spindle speed: 2800 rpm - Motor power: 1.5 kW - Operating pressure: 6/8 bar - Dust extraction port diameter: 80mm - Machine package dimensions: 1115 x 950 x 1050mm - Frame package dimensions: 1500 x 120 x 60mm - Net/gross weight: 271kg/301kg Net price: 29,900 PLN Net price: 7,120 EUR (based on 4.2 EUR exchange rate) (Prices are subject to change with significant exchange rate fluctuations) PRODUCT FEATURES The Maggi Ms704 is a multi-spindle drilling machine designed for rapid production of custom furniture. The MS 704 is a compact machine capable of managing the production process from start to finish, including drilling carcasses, hinge fronts, and any type of system drawers from any brand. The drill allows comprehensive machining of all hole types, in all common technologies: for confirmats, dowels, connectors, mounting holes for runners, shelf pins, hinge cups, and mounting holes for guides and actuators. The worktable width, without removing side stops, is 740mm, so you can drill components with greater-than-standard depths without limitations. The machine is equipped with a patented 1500mm fence frame, allowing processing of workpieces up to 3000mm long, independent of the 32mm system. A new concept for furniture element drilling allows for fast material processing without needing to retool the machine. The fence frame is a fixed part of the device. Unlike conventional drilling machines, the main operational axis is perpendicular to the drilling head, not parallel. The MS 704 is also equipped with adjustable pressure beam height, making it possible to work with materials up to 200mm thick. The clamps are powered by independent circuits and are equipped with valves for safe operation, allowing one clamp to be switched off when machining smaller components. The MS 704 comes as standard with a drill bit magazine and a complete set of spacers for positioning elements along the axis parallel to the spindle head.

Condition: used, BLX 130 – mașină de alezat (boring machine). Mașină de alezat si frezat BLX wmw 130 📌 Date generale Model: BLX 130 Tip echipament: Mașină de alezat si frezat orizontal . Credpfx Ahew Hpxcs Usi Utilizare tipică: Prelucrare de mare precizie a componentelor voluminoase (corpuri de utilaje, matrițe, componente pentru energie, structuri sudate etc.) 📐 Capacități de lucru (cursă pe axe) AxaCursă (mm)Descriere X10.000 mmCursa longitudinală (deplasarea mesei pe lungime); indică o capacitate de prelucrare a pieselor mari, lungi (ex: carcase, șasiuri) Y3.000 mmCursa verticală a capului de alezat (ridicare/coborâre pe coloana principală) Z1.000 mmCursa transversală a capului de alezat (mișcare înainte/înapoi față de piesă) W1.000 mmCursa pinolei (bară de alezat) – avansul axial al sculei (esențial la alezare profundă) ⚙️ În mașinile de alezat, W este mișcarea de avans axial a barei de alezat (boring bar), care poate ieși sau intra din capul principal, independent de axa Z. ⚙️ Caracteristici structurale (tipice la această clasă de mașini) ComponentăSpecificații (tipice pentru clasa BLX 130) Diametru pinolă (bară alezare)130 mm (de aici vine „BLX 130”) Sistem de ghidajGhidaje prismatice sau liniare, pe axele X/Y Cap standard de alezat + opțional cap universal sau cap unghiularPutere motor principal30–50 kW (în funcție de variantă)Turații ax principal10 – 3.000 rpm (reglaj variabil, transmisie cu cutie automată sau servomotor)

Condition: not inspected (used), Year of construction: 1996, functionality: unexamined, machine/vehicle number: 8170, measuring range X-axis: 3,000 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 1,600 mm, overall weight: 7,000 kg, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! By submitting a bid, you are obliged to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS X-travel: 3,000 mm Y-travel: 2,000 mm Z-travel: 1,600 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 6,000 x 3,000 x 4,000 mm Weight: 7,000 kg EQUIPMENT Loading gantry on rollers Various clamping elements Angle plates Cedpfexni Evex Ah Usri Computer including three-axis digital display

Condition: used, Year of construction: 2015, WENZEL coordinate measuring machine (CMM) Travel distances: X2000, Y1200, Z1000 mm Credpfx Asxu Nwleh Uei Year of manufacture: 2015

Condition: good (used), Year of construction: 1995, functionality: fully functional, Control: SIEMENS 840D Solution Line (electrical overhaul 2017) x-travel: 7.000 mm y-travel: 2.100 mm z-travel: 1.500 mm z-travel vertical: 1.200 mm Universal milling head (orthogonal design) Swivel range of milling head holder: 340 °Grad Swivel range of milling head: 180 °Grad Mounting cone for tools with steep taper: SK50 spindle truning speed range: 22 - 2.240 U/min Codsxvc Aqopfx Ah Uori Feed rate x,y and z-axis: 2 - 12.000 mm/min Rapid traverse rate x,y, and z-axis: 12.000 mm/min Drive power 100% ED / 60 % ED: 31,5 / 39 kW Clamping plate dimensions of clamping plate: 6.000 x 1.500 x 300 mm Number of T-slots: 6 T-slot distance: 250 mm max. load: 10 t/m² Equipped with: NC dividing head PEISELER AWU 650 with vertical faceplate, diameter 650 mm automatic universal milling head, orthogonal, (Completely refurbished 2017, rarely used since then) SIEMENS electronic handwheel 3 support tables various prism support blocks MAYFRAN hinged belt conveyor Coolant system with paper belt filter Work platform moving in the X direction, protective cover with viewing window The machine is in exceptionally good condition and can be viewed while under power. In 2017, a new SIEMENS 840D Solution line control system was installed, all drive motors and the control cabinet were replaced at the same time.

Condition: used, x-travel 400 mm y-travel 250 mm tool taper ISO 40 turning speeds 40 - 3.150 U/min Crodpfsxu Nxpsx Ah Usi table dimensions 630 x 300 mm table load 150 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: excellent (used), Year of construction: 2006, operating hours: 24,000 h, functionality: fully functional, 1 x CNC bridge-type coordinate measuring machine WENZEL LH 1512 / CNC Year of manufacture: 2006 Installed software: Metrosoft CM 3.110 (March 7, 2013) No connection to any ZEISS software components. Measuring range (according to WENZEL test report): X-axis: 1,500 mm Y-axis: 2,500 mm Z-axis: 1,200 mm Accuracy / inspection: Factory calibration by WENZEL according to ISO 10360-2/-4, report no. 064708, dated 10.11.2022 All test items “i.O.” (passed) Next due inspection: 02 / 2026 Control / electronics: WENZEL control unit WPC 2030 Renishaw probe interface IU80 Measuring machine PC without hard drive License dongle for Metrosoft CM Installation CD for Metrosoft CM 3.110 Scope of supply: CMM WENZEL LH 1512 / CNC 2 x calibration spheres Ø 25 mm 3 x mounted probe racks 1 x additional new probe rack 1 x wireless hand control unit 1 x cabled hand control unit (currently not in use) Cedexu Nlcjpfx Ah Ueri Compressed-air filter Donaldson Ultrafilter Approx. 70 probe plates + 2 new probe plates Approx. 50 holders for unused probes Various styli and extensions Important! delivery without hard drive – as shown in the photos – hard drive you can buy for 100 USD anywhere across the globe.

Condition: good (used), Year of construction: 1981, Dimensions (L/W/H) 660x1050x1600 mm metric thread M 33 Messing metric thread M 16 Gußeisen Credjul Eg Djpfx Ah Uei metric thread M 14 Stahl no. of flutes 25x10mm 2x T-Nuten throat 220 mm weight 730 kg

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 30547, spindle speed (max.): 160,000 rpm, table width: 350 mm, table length: 700 mm, overall weight: 3,000 kg, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! By placing a bid, you commit to timely collection between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Spindle speed Turbine T10: 75 / 100,000 rpm Spindle speed Turbine T16: 120,000 – 160,000 rpm Table dimensions: approx. 700 x 350 mm MACHINE DETAILS Electrical Data Operating voltage: 3 x 380 V Frequency: 50 Hz Control voltage: 110 V Connection: 6 kW Credpfx Ahoxnl Ims Uoi Dimensions & Weight Dimensions (L x W x H): 3,500 x 2,000 x 2,900 mm Weight: 3,000 kg EQUIPMENT 3 different high-frequency grinding heads (various speeds) Two-axis digital display by VISULESTA With 4 T-slots

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN type PICOMAX 100-CNC 3 CNC control HEIDENHAIN TNC 155 make no. 16186651 year of construction 1986 spindle holder FEHLMANN SF32 drilling capacity Ø 30 mm in steel threading up to M20 in steel travel X: 850 mm, Y: 435 mm pinol stroke Z: 210 mm vertical movement milling head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid traverse X and Y 8 m/min. rapid traverse Z 4 m/min. Table clamping surface 1570 x 500 mm distance spindle nose - table 130 - 720 mm projection spindle - column 450 mm Spindle speed 50 - 7100 rpm. Stepless spindle drive 10 kW Total connected power 20 kW Mains connection 400 Volt, 50 Hz - CNC control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z pinol adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - thread cutting device Crjdpfx Aohik Ezoh Uei - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shut-off via adjustable cams - 3D probe RENISHAW, type MP 11F with holder Fehlmann SF32 - 20 tool holders FEHLMANN SF32 - swivelling tool holder with 21 tool places - Coolant device in the machine column - control cabinet fixed to the machine - Documentation Operating manual, control manual and E-circuit diagrams space requirement L x W x H 2350 x 2000 x 2300 mm weight 3,2 ton. very good condition

Condition: used, Price: On request - Documentation available: No - Control: Conventional - Drilling depth: 150mm - Model: ördinatenboor Cjdpfxswfpbbe Ah Uori - Digital readout: Yes - Table width: 1500mm - Table length: 2200mm - Travel X: 2500mm - Travel Y: 1400mm - Spindle diameter: 100mm - Travel Z: 1000mm - Number of axes: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2019, TESA HITE magna : • Electronics completely protected against the ingress of liquids or dust (IP65). • Fixed desk, numerical display 0.001 / 0.005 / 0.01 mm or 0.0001 / 0.0002 / 0.001 in. • High reliability and easy operation when determining external, internal dimensions, depth, height, spacing. • Measurement of diameters, parallelism deviations, perpendicularity deviations. • Patented TESA magnetic measuring system guaranteeing optimal operation in the most difficult workshop conditions. • Zeroing at any location. TESA HITE : • Built-in air cushion for sliding. • Measurement of parallelism and perpendicularity deviations. • Patented TESA optoelectronic system. Guarantee of high precision thanks to a durable glass ruler. Application : 1 standard measuring tip, 1 ball measuring tip, hardened steel d. 5 mm, 1 basic device for measurement continuity, 1 6V battery, 1 transformer 100V/250V – 50/60Hz, EU and US power cord. Cjdpfx Ajwcrhfoh Ueri Basic technical data Range (mm) 715 Application expansion (mm) 0-715 Scale (mm) 0.01/0.005/0.001 Accuracy (mm) 0.0001/0.001/0.01 Repeatability

Condition: used, Year of construction: 2011, Portable 7-axis measuring arm with a measuring range of 3.6 m, designed for tactile and non-contact 3D measurements. Csdpfxsxuf Ugj Ah Usri Calibration certificate “MCA II Calibration Certificate” confirms the following specifications: Maximum deviation: 100 µm (Range 1) 70 µm (Range 2) Ambient temperature: 20 °C Test type: Single Point Articulation Test (SPAT) Accessories visible in the images: - ROMER “Infinite™ Series Portable Measurement System” setup manual - CMM-Manager Software License (Version 3.0) - Probe stylus set - USB dongle (license key) - Calibration bar and connection cables - Transport cases with protective foam inserts Country of origin on the device: Made in the UK

Condition: good (used), Year of construction: 2017, functionality: fully functional, Technical details core drilling diameter max. 3 - 28 mm bore depth 1000 mm control Heidenhain TNC 640 x-axis 1000 mm y-axis 800 mm z-axis 800 mm Crodpjxr Uqrofx Ah Usi spindle head - swivable (W) +15°/-30° deg B-axis (table) 360.000° deg table surface area 1000 x 1000 mm table load 5,0 t tool taper SK 40 spindle turning speed range 60 - 6000 U/min spindle motor 12 kW total power requirement 58 kW weight of the machine ca. 14 t dimensions of the machine ca. 6,35 x 4,75 x 3,80 m Additional information 5 axes Deep Drilling-Milling-Machine Equipped with: HEIDENHAIN TNC 640 control 5 CNC AXES X – Y – Z – W – B NC rotary table 360.000 deg. Milling performance 150 cm3/min. Direct linear position measuring system Digital AC drives Table design with Hirschmann zero-point clamping system NC-controlled tilting of the deep hole drilling/milling unit (W) +15/-30 deg. Automatic tool changer for 24 tools Internal coolant supply High-pressure coolant system 1200 liters for deep hole drilling oil up to 140 bar Paper belt filter system SIEMENS extinguishing system Fire protection system Spindle cooling Oil temperature control 3D HEXAGON probe RENISHAW tool measurement Electronic handwheel OPT kinematics Chip conveyor Coolant pressure and flow control Collision and vibration monitoring Feed control Coolant gun MONTRONIX machine airbag Oil mist extraction 2 clamping plates Walk-in full enclosure with roof and opening for crane loading Included in delivery: Operating manual Documentation Machine parameters on USB stick

Condition: ready for operation (used), Year of construction: 1988, operating hours: 20,231 h, functionality: fully functional, machine/vehicle number: 2080, travel distance X-axis: 400 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 250 mm, spindle speed (max.): 80,000 rpm, workpiece weight (max.): 300 kg, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Placing a bid commits the buyer to collect the machine on time between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 200 mm Travel Z-axis: 250 mm Maximum spindle speed: 80,000 rpm Distance between column and spindle: 340 mm Clearance between table and spindle: 485 mm Main spindle diameter: 100 mm Credpfoxm Rq Djx Ah Uji Adjustment range X: 400 mm Adjustment range Y: 250 mm Adjustment range W: 450 mm Adjustment range Z: 120 mm Adjustment range U: 6/20 mm Table dimensions: 600 x 380 mm T-slots included: 6 Width of T-slots: 10 mm Distance between T-slots: 50 mm Maximum table load: 300 kg Max. taper grinding: 16 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 3,500 x 3,000 mm Total weight: 7,000 kg Electrical Data Operating voltage: 3 x 380 V Frequency: 50 Hz Connected load: 7.5 kW Operating Hours Grinding hours: 20,231 h Power-on hours: 49,158 h EQUIPMENT SAV magnetic chuck (300 x 150 mm) Lista double workshop drawer cabinet Abrasives High-frequency grinding heads up to approx. 80,000 rpm

Condition: excellent (used), Year of construction: 2022, Also for direct use on the processing machine. RRP approx. €50,000 Documentation -Laptop including software -Measuring device with table and camera Credpfxjv N Dzro Ah Uoi -Measuring probe -Tripod for measuring in the machine or for large workpieces -Charger including spare battery for measuring probe

Condition: used, Year of construction: 1988, control Heidenhain 355 tool adaptor SK50 weight of the machine ca. 8 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Crodpfxsf Tdvbo Ah Usi Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: Y7081050033, measuring range X-axis: 300 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, overall weight: 70 kg, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Bidding implies a binding commitment to collect the item between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Measuring range X-axis: 300 mm Measuring range Y-axis: 250 mm Crjdpfsxm U E Sex Ah Usi Measuring range Z-axis: 150 mm Smallest display unit: 1 Repeatability: +/- 3 Measuring deviation: +/- 8 Max. load capacity: 25 kg MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,000 x 800 x 600 mm Total weight: 70 kg Camera image sensor: 4 Megapixels, CMOS Central wavelength during image capture: Near-infrared light EQUIPMENT Control unit: XN-1500 Measuring head: XN-1000 Touch probe Number of storable probes: 7 Handheld measuring device corresponding hardware Transport case Documentation

Condition: used, Year of construction: 2007, 106 369-11 bore diameter 3 - 65 mm number of spindles 1 total power requirement 45 kW . Siemens control Simens Sinumerik . weight 45 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Cjdpfewizn Uox Ah Usri +++++

Condition: ready for operation (used), functionality: fully functional, overall weight: 150 kg, table diameter: 300 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Placing a bid is binding and obligates prompt collection between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Support diameter: 300 mm Credpfxjxm U D Is Ah Uoi MACHINE DETAILS Dimensions & Weight Dimensions: 1,000 x 900 x 800 mm Weight: 150 kg EQUIPMENT Matching hardware