Used Radial Boring Machine for sale (63,836)

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Ncsdpjlhwr Refx Ab Tjn Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: used, Radial drilling machine with plate field WEBO type HRH 100 / 3000 Machine. No. 10009555/7 -- 1110185 -- 6046 Year of manufacture 1979 Drilling capacity Ø 100 mm in ST 60 at feed rate 0.5 mm/rev. Nodpfx Aefbt Husb Tocn Nominal throat depth 3000 mm Max. throat depth max. 3100 mm Spindle holder MK 6 Spindle speed 22.4 - 1600 rpm 36 steps Feed rate 0.05 - 2.5 mm/rev 18 steps Spindle - base plate distance 970 - 2335 mm Pinol stroke 325 mm Swivel range of the arm 360 movable on bed, bed length 7500 mm Clamping area panel field 8000 x 2100 mm - Electrical central clamping - Drilling unit can be moved lengthwise on the machine bed by electric motor - Panel field consisting of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x panel thickness 360 mm) Space requirement L x W x H 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 tons Transport dimensions of panel section L x W x H 4000 x 2100 x 900 mm (2 panels stacked on top of each other) Transport weight panel field approx. 14 ton. good condition

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Nsdpfou T Ty Hjx Ab Tscn Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t.

Year of construction: 1997, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, controller manufacturer: Fanuc, spindle speed (max.): 20,000 rpm, machine/vehicle number: 97-VP461, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 350 mm Spindle speed: 20,000 rpm Tool changer positions: 30 MACHINE DETAILS Control manufacturer: Fanuc EQUIPMENT BT 40 Big Plus tool holder Ncsdpfx Aoyi U Iaob Tjn 4th axis table Oil mist minimum quantity lubrication system

Condition: excellent (used), drilling depth: 10,000 mm, MGA (Romanian) Deep Hole Boring Machine Max Boring Dia: 187mm Max Boring Length: 10,000mm Chuck Diameter: 813mm Ncsdpfx Absyk Tcfj Tjn Chuck Bore: 152mm Machine had a complete retrofit in 2007 to enable CNC or manual mode operation Controls: Bosh Rexroth Electric Drives Software Winstudio At the moment the machine is set to bore 3000mm length Has 5 other bed sections to increase this 12 Various Boring Tubes 30 Various Boring Heads 5 Supporting Steadies 2 Pressure Heads

Year of construction: 2001, condition: like new (used), Retrofitted: 2024 Numerical control: HEIDENHAIN TNC426 Nsdpfeugbrqox Ab Tecn Technical features Dimensions Table dimensions: 6000 x 1000 mmNumber of T slots: 7T slots dimensions: 22 mm Traverses of axis Longitudinal traverse X: 5040 mmVertical traverse Y: 1000 mmTransversal traverse Z: 1500 mm Milling head Head type: Fixed frontalTool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872-BSpeed range: 60 - 3000 rpmSpindle power: 22/30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 10000 mm/min Weight and dimensions Maximum weight on table: No restrictionsMachine weight approx.: 43000 kgMachine dimensions approx.: 11560 x 6150 x 3538 mm Accesories Guarding (Option: pendular guarding)Automatic tool changer: AH40Chip conveyor: 2 longitudinalElectronic handwheel: HR-410External coolant Sales conditions Warranty: 6 months mechanical partsSale price (Ex Work): On request View all technical features

Condition: used, Year of construction: 2009, spindle diameter 125 mm x-travel 1.500 mm y-travel 1.250 mm z-travel 1.000 mm w-travel 550 mm table surface area 1.000 x 1.250 mm workpiece weight 6.000 kg quill stroke 550 mm tool taper ISO 50 Nodpfx Abowdta Ej Tscn number of spindle speeds 5-3.700 U/min. max. torque 2012 Nm feed speeds 1-6000 (x-Achse) mm/min feed speeds 1-6000 (y-Achse) mm/min feed speeds 1-6000 (z-Achse) mm/min rapid traverse x/y/z 15/ 15/ 15 m/min dimensions of the machine ca. 7,51 x 5,07 x 3,33 m 63 kVA Equipment/ Accessories: - CNC control Siemens 840 D - 60 ATC - Coolant system with high-pressure pump 30 l/min.- 20 bar - documentation

Condition: good (used), Year of construction: 2008, Ref. -No.: 10621 Manufacturer: PAMA Type: Speedmat 3/TR16 Year of construction: 2008 Type of control: CNC Control: SIEMENS SINUMERIK 840 D PL Storage location: Halberstadt Country of origin: Italy X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 2200 mm W-Axis: 800 mm Bore Spindle Diameter: 160 mm Table Load: 12000 kg Table surface: 1600 x 2000 mm Tool Taper: ISO 50 BIG PLUS Turning Speeds: 3500 RPM Max. Torque: 2.765 Nm Rapid Travel X/Y/Z: 25000 mm / min Drive Capacity - Spindle Motor: 46 kW Internal cooling: 15 / 45 bar External cooling: 50 / 4 bar Spindle speed gear stage 1: 2.120 1 / min Spindle speed gear stage 2: 2.765 1 / min Further information: Automatic tool changer SK50 DIN 69871, 80 positions. Automatic angle milling head TS 35 with 360 positions, speed 2,000 rpm and torque 2,000 Nm. Automatic universal milling head TU25C (2-axis), speed 3,000 rpm and torque 800 Nm. Automatic accessory changer, 2+1 units. Touch probe (Renishaw). The machine can be inspected under power. Nedpfx Abjym Nfuo Tscn

Condition: good (used), Year of construction: 2004, Ref. -No.: 10604 Manufacturer: UNION Type: TC 110 Year of construction: 2004 Type of control: CNC Control: SINUMERIK 840 D Powerline Ncsdpfx Aoym Ndwsb Ton Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1250 mm Z-Travel: 1000 mm W-Axis: 550 mm Table Height: 1050 mm Spindle Diameter: 110 mm Number of T-slots: 10 Max. Workpiece Weight: 6000 kg Clamping Area: 1250 mm T - groove width: 22 mm T - slot spacing: 125 mm Tool Taper: ISO 50 Max. Torque: 1639 Nm Feed Speeds X/Y/Z Axis: 6000 mm / min Rapid Traverse X-Axis: 15000 m / min Rapid Travel Y-Axis: 15000 m / min Rapid Traverse Z-Axis: 15000 m / min Feed Capacities X/Y/Z: 16000 x 16000 x 20000 N swivel angle: 360 ° Further information: Includes angle head 0,001° The machine can be viewed under power.

Condition: good (used), Year of construction: 1989, Ref. -No.: 10600 Manufacturer: G.BREDA Type: R 55 2000 Nodpfoym Ndqjx Ab Tecn Year of construction: 1989 Storage location: Halberstadt Country of origin: Italy Machine-No.: 16XXXXX Spindle Taper: MK 5 Clamping Area: 1000 - 1700 mm Automatic feeds: 0,06 - 1,00 mm / rev Spindle Speed: 30 - 1200 RPM Drive Capacity - Spindle Motor: 400 V / 5,5 kW Bore Capacity In Steel (Diameter): 55 mm Weight Of The Machine Ca.: 4800 t Dimensions Of The Machine Ca.: 2,99 x 1,12 x 2,85 m Drill spindle stroke: 240 mm Drilling performance reaming: 80 mm Thread cutting: M 40 approx. Further information: - Reach min. / max. / 320 / 2005 mm - Column diameter 360 mm - Boom stroke 855 mm - Spindle - base plate approx. 1000 - 1700 mm - E - Central clamping - Cube table - Hydraulic vice - Coolant device The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 1981, Ref. -No.: 10447 Manufacturer: SKODA Type: WD 200 Year of construction: 1981 Retrofit: 2010 Type of control: CNC Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 9000 mm Y-Travel: 4000 mm Z-Travel: 1450 mm W-Axis: 2000 mm Bed width: 2000 mm Ncodjym Nbpjpfx Ab Ton Bed height: 550 mm Spindle Diameter: 200 mm Quill Stroke: 1600 mm Rotary Table (Lxw): 4000 x 4000 mm Table Load: 80000 kg Clamping Area: 3000 x 3000 mm Turning Speeds: 257 - 2570 RPM Spindle taper: 120 Automatic feeds: 342 mm / rev Spindle Turning Speed - Stepless: 1,5 - 630 RPM Max. Torque On The Boring Spindle: 20000 Nm Rapid Traverse: 16000 m / min Drive Capacity - Spindle Motor: 9,8 - 35,5 kW Total Power Requirement: 75 kW Bore Depth: 2000 mm Vertical headstock movement on the column: 3150 mm transverse movement of the stand on the bed: 4000 mm Lowest position of the spindle axis above the bed: 1100 mm Spindle speed when moving the quill forward: 1,6 - 300 max. rpm Drill feeds (spindle, quill) continuously variable in the range: 1,6 - 1600 mm / min Milling feeds (headstock vertical, column horizontal) infinitely variable: 1,6 - 1600 mm / min Machine length: 11350 mm Machine width: 5450 mm Machine Height: 7350 mm Weight Of The Machine Ca.: 65 t Further information: Threading: 22 metric threads, pitch range 0.5 - 12mm 32 Whitworth threads, pitch range 28 - 1 (gears) Accessories: - console for tools - 1 set of operating tools - ejector and fastening wedges for spindle - lubricating press - 1 set of spare parts for electrical equipment - clamping base plate - setting stick with electrical equipment Machine can be inspected under power by appointment.

Condition: used, Year of construction: 2006, Radial drilling machine Manufacturer: Valmer Model: TR 80/2500 SP Year of manufacture: 2006 Table dimensions: 1,000 x 800 x 560 mm Maximum drilling diameter: 80 mm Maximum tapping diameter: 42 mm Maximum spindle axis/column distance: 2,500 mm Minimum spindle axis/column distance: 500 mm Horizontal head travel: 2,000 mm Maximum distance spindle nose to working surface: 2,000 mm Minimum distance spindle nose to working surface: 550 mm Nedpfow Dbgyex Ab Tocn Spindle stroke: 450 mm Morse taper: MT 6 Power: 7.5 kW Machine dimensions: 3,730 x 1,400 x 3,825 mm Weight: 11,000 kg

Condition: used, spindle mount: MK 4, drilling depth: 50 mm, overall weight: 2,300 kg, Radial Drill Brand: Foradia Model: GH 50-1000 Serial No.: 5080 Drilling capacity: 50mm Maximum radius: 1,135mm Minimum radius: 425mm Longitudinal head travel: 700mm Column diameter: 250mm Usable arm from column edge: 300mm Vertical arm stroke: 620mm Minimum spindle-to-base distance: 300mm Maximum spindle-to-base distance: 1,145mm Nsdpfx Ajymw I Dsb Tscn Spindle stroke: 225mm Morse taper: 4 Speeds: 12 (35-1460rpm) Automatic feeds: 6 (0.05-0.35) Motor power: 3.5 + 1.5 Hp Weight: 2,300kg

Condition: not inspected (used), Year of construction: 2011, functionality: unexamined, machine/vehicle number: 35114, travel distance X-axis: 600 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 4,000 rpm, controller model: HEIDENHAIN TNC 124, No minimum price - guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item within the specified timeframe: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 300 mm Travel Z-axis: 600 mm Travel W-axis: 650 mm Spindle speed: 0 – 4,000 rpm Table dimensions: 1,000 x 680 mm Drilling diameter, twist drill: max. 16 mm Single-lip drill: 4 – 16 mm Thread cutting: max. M12 MACHINE DETAILS Control: HEIDENHAIN TNC 124 Operating voltage: 400 V Frequency: 50 Hz Rated current: 14.2 A Connected load: 0.8 kVA Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,500 x 2,100 mm Weight: 2,000 kg Nodpjym Nuvefx Ab Tscn EQUIPMENT With 4 T-slots Including various tool holders External reference: Laubender

Condition: used, Year of construction: 1986, spindle diameter 1 mm Ncodpoylzv Ajfx Ab Tsn x-travel 1 mm y-travel 1 mm total power requirement 1 kW

Condition: used, Lot consists of: (1) universal milling machine Ncsdpsylacbsfx Ab Ten

Condition: used, Year of construction: 2000, Table size: 580 x 280 mm Drill table height: 800 mm Drilling depth: 150 mm Drilling length: 225 mm Height adjustment: 180 mm Swivel range: 2x 45° Drill speed: 2800 rpm. Wescute drill chuck: 0-20 mm dia. Extraction port: 80 mm dia. Motor power: 2.2 kW / 3 HP Space required: 850 x 1000 x 1050 mm Weight: approx. 240 kg Storage location: Nattheim Nodpfx Aexya H Iob Tjcn

Condition: as good as new (ex-display), Year of construction: 2021, bore capacity in steel (diameter) 40 mm arm length 370 - 950 mm workpiece height max. -- mm turning speeds 50 - 316 / 316 - 2000 U/min spindle taper MK 4 tread diameter max. M30 boring head -90° bis +90° schwenkbar quill stroke 200 mm feed (6) 0,08 - 0,50 mm/U distance spindle /table 390 - 780 mm T-slots 18 mm column diameter 220 mm total power requirement 2,2 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 2,45 x 1,2 x 2,72 m Very good condition * Electromotive height adjustment of the drill head without adjustment the drilling position, ideal for deep hole drilling * Drill head can be swiveled 180°, boom can be moved back and forth and horizontally pivotable * Thread cutting device and 6 automatic drilling feeds * Large table surface (1195 x 500 mm) for simultaneous clamping several workpieces * Digital speed and drilling depth display * Quickly adjust the drill head to the workpiece and clamp it hydraulic * with electronically stepless speed control * User-friendly operation via membrane keyboard Scope of delivery: Thread cutting device LED machine light Coolant device Height-adjustable protective cover Electromagnetic spindle feed Digital speed display Digital drilling depth display Ncjdpfxoxwdvbe Ab Tsn Electromotive drill head adjustment

Condition: excellent (used), Year of construction: 2014, bore capacity in steel (diameter) 45 mm arm length 1050 mm Vertikal stroke 450 mm quill stroke 200 mm spindle taper MK 4 Nodjx Szp Ropfx Ab Tjcn spindle turning speed range 15 - 2800 U/min transmission ratio 2 distance spindle /table 710 mm weight of the machine ca. 2600 kg dimensions of the machine ca. 3000 x 3000 x 3220 mm This DONAU FLEX 145 radial drilling machine is in very good, as-new condition and has only 97 operating hours. The machine is available immediately.

Condition: good (used), Year of construction: 2000, machine/vehicle number: 152362081, functionality: fully functional, throat depth: 2,700 mm, spindle diameter: 110 mm, sheet thickness steel (max.): 100 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 9 rpm, Radial drilling machine MAS U 1000 Year of construction 2000 Conventional / digital control With face plate 1,000 mm and tool package Viewing is possible at any time by arrangement. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Ncedpforwxpfsx Ab Ton #Tags: Radial drilling machine MAS | MAS1000 | U1000

Condition: excellent (used), feed length X-axis: 700 mm, feed length Y-axis: 350 mm, feed length Z-axis: 475 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 475 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 25 rpm, quill stroke: 100 mm, table length: 1,510 mm, table width: 350 mm, Cincinnati 2MK Horizontal Mill with Universal Vertical Head Model: 2MK Table Atea: 1510 x 350mm (60” x 14”) Longitudinal Travel: 700mm Cross Travel: 350mm Vertical Travel: 475mm Spindle Taper: 50 INT Spindle Speeds: 25 – 1500 RPM Nedoygk Drjpfx Ab Tocn Machine with: Horizontal Arbor & Arbor Support Angular Double Swivel Head

Condition: good (used), Year of construction: 1995, operating hours: 50,000 h, functionality: fully functional, Drilling capacity (min-max diam.) 2-22 mm Drilling capacity with 2 chucks 2-16 mm Maximum drilling depth 500 mm Drilling type: gun drilling Distance between spindle axis and table surface 200 mm Drill spindle power 7.5 kW Drill spindle speed 0-6000 RPM Feed rate 0-1000 mm/min FANUC Ncsdpfoylnufox Ab Tjn Counter-rotation: Yes Maximum workpiece length 700 mm Maximum workpiece diameter 72 mm Power 0.55 kW Counter-rotation speed 0-60 RPM Tank capacity 1200 l Flow rate 66 l/min Pressure 110 Bar

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 Nedpfx Abeylnpio Tecn • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Condition: new, Year of construction: 2025, neu 2025 030138 prompt, Zwischenverkauf v Deutschland 3444.77 € 1 13 mm MK 2 220 mm 40 - 4000 U/min 0,54 (230 V, frequenzgere kW M 10 (steigungsabhängig) 520 mm 400 mm 850 mm 62 kg 60 mm 85 - 370 mm 420 mm 300 x 250 mm 70 mm Njdpfsxcbhrox Ab Tjcn Continuous/normal drilling performance 13/15 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob Emergency stop push button Thermal overload protection Spindle stop Drill protection with electrical protection Connection cable with Schuko plug OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: new, Year of construction: 2026, functionality: fully functional, New KAO MING hydraulic radial drilling machine, year of construction 2026. Specifications: Maximum distance between spindle center and column face: 1250mm Minimum distance between spindle center and column center: 360mm Column diameter: 350mm Column height: 2685mm Base floor space: 2035x840mm Total floor space: 2335x1140mm Njdpfx Aeykkhxsb Tscn Base height: 188mm Spindle head longitudinal travel: 890mm Vertical arm travel: 700mm Spindle travel: 300mm Spindle taper: MK5 Table work area: 1393x820mm Main spindle motor: 3.7kW (5hp) Spindle speeds: 25–1310rpm (12 steps) Feed range: 0.06mm/rev to 1.12mm/rev (12 steps) Drilling capacity in cast iron: 60mm Drilling capacity in steel FC20/S45C: 50mm Weight: 3460kg