Radial drilling machine

Breda R 1220 MP

Condition: used, Year of construction: 1991, bore capacity in steel (diameter) 50 mm arm length 1100 mm workpiece height max. ca. 1000 mm bore capacity in cast iron 60 mm spindle taper MK 5 spindle turning speed range 28 - 2500 U/min feeds 0,05 - 2 mm/U quill stroke 300 mm distance basic plate - spindle nose 630 - 1380 mm crossrail adjustment vertical 750 mm total power requirement 6 kW weight of the machine ca. 4 t dimensions of machine L x W x H 2,74 x 1,14 x 2,59 mm - with thread cutting attachment - Accessories: box table 550 x 550 x 550 mm, vice, coolant Codeu Sblwopfx Afxjrg

Year of construction: 1967, condition: good (used), machine/vehicle number: 7011/C, table mounting size: 310 x 1400 mm table movement x: 950 mm Csdpfxjd Rxw Hj Afxerg table movement y: 325/345 mm table movement z: ca. 500 mm spindle turning speed range: 20 - 1500 rpm carriages longitudinal and cross: 18 - 620 mm/min carriages vertical: 18 - 620 mm/min electrical connection: 380 V kW space needed: 1900 x 1600 x 1750 mm weight: ca. 1500 kg

Condition: used, Year of construction: 1983, Bohrleistung in Stahl (-Ø 50 mm throat 1500 mm Csdpstv Ikljfx Afxorg workpiece height max. 1380 mm Bohrleistung in Guß (-Ø 60 mm Abstand Spindelmitte bis Säule 320 - 1250 mm swival range +/- 180 ° base plate surface area 2640 x 1000 mm max. torque on the spindle 310 Nm Bohrspindel-Ø/ Aufnahme 75 mm /MK 5 bore spindle stroke 310 mm spindle turning speed range 28 - 2500 U/min feed: 0,05 - 2 mm/U power capacity 4 kW weight of the machine ca. 4,3 t dimensions of the machine ca. 3,2 x 1 x 2,75 m cube table 500 x 500 x 500 mm

Year of construction: 1992, condition: good (used), machine/vehicle number: 03.323.36002, Item No. 22621 Technical Data: - Max. working length 3500 mm - Distance between columns 3050 mm - Max. pressing force 2000 kN - Distance table / ram max. 480 mm - Column overhang 260 mm - Ram stroke approx. 300 mm - Stroke speeds - Downward speed, no load max. 100 mm/sec - Upward speed 80 mm/sec - Downward pressing speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm - Weight approx. 16000 kg - including: - CNC control CYBELEC, renewed in 2008 Credpfsip Niksx Afxog - Controlled crowning device - Controlled rear backstop with height adjustment 5 - 1000 mm - Hydraulic tool clamping - Upper tool + universal die set - Material supports - Two-hand control panel

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,350 mm, feed rate X-axis: 13,000 m/min, feed rate Y-axis: 13,000 m/min, feed rate Z-axis: 13,000 m/min, total length: 12,000 mm, total height: 4,800 mm, table width: 2,000 mm, total width: 6,800 mm, table length: 2,500 mm, drilling capacity: 180 mm, rotational speed (min.): 2,000 rpm, feed length W-axis: 1,000 mm, Coolant true spindel 20 Bar Paper filtration system ATC Tool changer 60 Positions  Spindel extension L = 550 mm Full B-Axis 360.000 with ROD880C Table load 28.000 Kg X - Travel: 5000mm Cedpfx Afoy Hq Dyoxsrg Y - Travel: 3500mm Z - Travel: 2350mm W - Travel: 1000mm Table Length: 2500mm Table Width: 2000mm Table load: 28000 Speeds / ranges: 2000Rpm Power: 51kW Spindle Taper: 180 ISO50ISO/Bt/Mk Feed rate X-Axis: 13000mm/min. Feed rate Y-Axis: 13000mm/min. Feed rate Z-Axis: 13000mm/min. Feed rate W-Axis: 13000mm/min. ATC Toolchanger: 60 Coolant through spindle / Bar:20 Number of controlled axis: 5 Length: 12000mm Width: 6800mm Height: 4800mm Weight: 44000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1999, pressure 130 t chamfer lenght 3550 mm distance between columns 3060 mm dayligth 510 mm Control Cybelec DNC 80 throat 320 mm stroke 250 mm work height max. 900 mm weight of the machine ca. 12000 kg dimensions of the machine ca. 4,05x2,1x2,85 m Control Cybelec DNC 80 Cedpfx Asvxwqfefxsrg Y1;Y2;X;R axis Die shift with hand wheel 4 stop fingers hydraulic stamp clamping WILA hydraulic die clamping System Amada 2 pcs. support arms saftey 2-hand / foot operation Various stamps and matrices

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 3roll 3500x140 mm prepinch, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: MG, controller model: MG, number of rollers: 3, roller (bottom) diameter: 880 mm, roller (top) diameter: 950 mm, side roll diameter: 880 mm, roller length: 3,550 mm, working width: 3,500 mm, working height: 3,950 mm, sheet thickness (max.): 140 mm, sheet thickness steel (max.): 175 mm, overall weight: 200,000 kg, total length: 8,800 mm, total width: 5,100 mm, total height: 5,775 mm, power: 200 kW (271.92 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG35140V 3 roll capacity 3500x140 mm The machine was overhauled in 2024, Capacity : Plate width mm. 3500 Plate thickness mm. 140 Capacity chart in enclosed Tech data: -3 rolls driven hydraulic motorized with axial gear unit on each roll independent Crodpfxsyzim Ae Afxog -Synchronized hydraulic rotation of the 3 rolls with variable speed. -Planetary design with pre-pinch fully hydraulic -Conical plate bending with hardened contrast pad -Digital position readouts of the bending rolls -Rolls installed on bearings double crown heavy duty -Overload safety hydraulic operation protection of the 3 rolls -High pressure hydraulic power pack with multi-pumps oil feed -Centralized control panel electric on wheels with joysticks and digital readouts -Emergency stop with safety system around the machine working area Rolls surface length mm. 3550 Top roll mm. 950 Side rolls mm. 880 Electric power on hydraulic unit Hp 100 + Hp 100 Voltage 380 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. -Centralized operator panel with directional joysticks electric. -Digital position readout of the bending rolls. -Emergency and safety installations, certified CE -User manuals and instruction books in English -Dimension see layout drw in enclosed

Year of construction: 2000, condition: good (used), LIVNICA KIKINDA tangential grinding machine Complete with magnetic table Longitudinal stroke mm 1000 Transverse stroke mm 400 Crsdpfjq Aaw Hsx Afxsg Motor power Kw 12 Weight Kg 3800

Condition: good (used), functionality: fully functional, Year of construction: 1998, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Simatic OP7, number of rollers: 4, roller (bottom) diameter: 470 mm, roller (top) diameter: 530 mm, side roll diameter: 400 mm, roller diameter: 530 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 2,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 65 mm, sheet thickness stainless steel (max.): 50 mm, overall weight: 40,000 kg, total length: 6,000 mm, total width: 2,900 mm, total height: 2,900 mm, power: 55 kW (74.78 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, plate bending roll capacity 3000x50 mm Davi modelMCB3053 Hydraulic 4 roll plate bending machine, year 1998 plate width 3000 mm thickness rolling 50 mm pre-bending 40 mm width on the rolls 3100 mm upper roll size 530 mm lower roll 470 mm side rolls 400 mm Power electric 70Hp on hydraulic unit voltage 380/50 - Installed configuration Hardened surface of the 4 rolls conical bending attachment – hardened cone bending Console electric with digital position readout of the rolls Controller Siemens Simatic OP7 NC programmer for automatic rolling Hydraulic power driven the central rolls with axial gearbox Pre-pinch pressure adjustable plate edge pre-bend. Drop-end open front for unloading closed shells Rerolling system for calibration roundness of welded shells. Safety and emergency system installed. Manuals original for operation and maintenance Dimension 6000x2900 x h 2900 mm weight 40000 kg Codpfx Aey D Ngzjfxerg

Condition: ready for operation (used), 1 x Davi round edge rolling machine / plate rolling machine / iron four-roll bending machine / 4-roll machine (English: Davi 4-roller bending machine) 4 rolls, 3.6 m x 95 mm thick. Crsdpfsymnzbex Afxog Video available via WhatsApp/Messenger/Viber. Inspection welcome near D-24983 Handewitt. Year of manufacture 2009 - in operation since 2010. More information available upon request.