Automatic bar lathe

TSUGAMI BW329ZE

Condition: reconditioned (used), Year of construction: 2008, operating hours: 13,600 h, functionality: fully functional, machine/vehicle number: 106, Machine partially overhauled by Willemin with new geometry and a new secondary spindle (6,000 rpm). New ball screws on X-Y-Z axes. Alignment and calibration. Ready for production. 5 axes – Fanuc 31i A5 – HSK40E – max 30,000 rpm – Year 2008. Country of manufacture: Switzerland Voltage: 3x400V / 60Hz; 50 A; 35 kVA Dimensions: 270x200x260 cm Net machine weight: 2,500 kg TECHNICAL SPECIFICATIONS WILLEMIN MACODEL 508 MT Control: Fanuc 31i A5 X axis: 450 mm Y axis: 200 mm Z axis: 425 mm B axis: -45° to +100° U axis: 300 mm Tool magazine: 48 PickUp stations Main spindle A: max Ø42 mm, max 6,000 rpm Main spindle C: max Ø42 mm, max 3,000 rpm Rcedow T Tlrepfx Afgeh Milling motor spindle: HSK40E, max 30,000 rpm All technical details are given without obligation and subject to errors or omissions.

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 68910, workpiece weight (max.): 5,100 kg, wheel width: 180 mm, grinding wheel diameter: 330 mm, helix angle: 45 °, rotational speed (min.): 1,100 rpm, rotational speed (max.): 1,900 rpm, type of input current: AC, wheel diameter: 10 mm, gear diameter: 330 mm, overall weight: 5,100 kg, total height: 2,300 mm, total length: 6,000 mm, total width: 4,500 mm, Wheel diameter - max. 10 - 330 mm Wheel width 180 mm Module - max. 7 Module - min. 0.5 Clamping length 420 mm Redpfx Aeykrmcsfgoch Number of teeth 10 - 600 Helix angle - max. +/- 45° Speed 1100 - 1900 rpm Grinding wheel diameter 280 - 350 mm Grinding wheel width 84 - 104 mm Machine weight approx. 5.1 t Required space approx. 4.5 x 6.0 x 2.3 m Grinding oil filtration unit Reishauer AF

Condition: repair required (used), Year of construction: 1983, functionality: limited functionality, total height: 2,650 mm, total width: 3,640 mm, total length: 4,620 mm, overall weight: 6,800 kg, Technical details: Rsdpeunwd Tefx Afgsch X-axis travel: 1000 mm Y-axis travel: 560 mm Z-axis travel: 800 mm Rapid traverse: 6 m/min Working feed: 1- 400 mm/min. Rotary axis resolution (degrees): 0,001 Control unit: Philips 432 Spindle revolutions: 20-2000 RPM Spindle stroke: 125mm Spindle taper: ISO 50 Spindle power: 15kW Feed force axis X and Z: 8000N Feed force axis X and Z: 24000N Table size 1250 x 800 mm Table load: 800kg Programing resolution: 0,001mm Documentation for machine Note: Defect electronic card should be replaced. The machine is mechanicaly in excellent condition, and could easily be retrofitted with modern CNC controls.

Condition: used, Year of construction: 2015, Swiss-type CNC lathe TSUGAMI B0206E-III Very good condition, only 6000 operating hours TECHNICAL SPECIFICATIONS: Year of manufacture: 2015 CNC control: FANUC series 32i-B Number of axes: 6 Rapid traverse rate, axis X1: 24,000 mm/min Rapid traverse rate, axis X2: 24,000 mm/min Rapid traverse rate, axis Z1: 32,000 mm/min Rapid traverse rate, axis Z2: 32,000 mm/min Rapid traverse rate, axis Y1: 15,000 mm/min Rapid traverse rate, axis Y2: 15,000 mm/min Max. bar diameter: 20 mm Rcjdpfszp D Uusx Afgsh Minimum spindle speed: 200 rpm Maximum spindle speed: 10,000 rpm Resolution of axis C: 0.001° Spindle power: 3.7 kW Minimum counter-spindle speed: 200 rpm Maximum counter-spindle speed: 12,000 rpm Resolution of counter-spindle axis C: 0.001° Counter-spindle power: 2.2 kW Number of positions in the front tool head: 8 Number of positions in the turret 1: 5 Number of driven positions in the turret 1: 3 Speed of driven tools in the turret 1: 8,000 rpm Number of secondary machining positions: 8 Number of driven secondary machining positions: 4 Speed of driven tools in secondary machining: 8,000 rpm Maximum cross-section of the tool holder: 12 x 12 mm Weight: 1,750 kg

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, input voltage: 400 V, year of last overhaul: 2023, Description – General: Year of manufacture: 2001/2023 Manufacturer: Emag Machine type: VL3 Technical data: Control system: Fanuc 21i-T Swinging diameter: approx. 210 mm Maximum speed: 6,500 rpm Turret: VDI 40 mm, 12 stations The machine does not have a live tool. Hinged belt chip conveyor Spindle mount: GR. 5 Rotating parts conveyor. Machine weight: approx. 5.5 t Rodpfotpu Szox Afgoch The following work was carried out during this overhaul in 2023: - The machine was completely disassembled, cleaned, and repainted. - The main spindle was fitted with new bearings. - The guides and guide shoes in the X-axis and Z-axis were replaced. - The ball screw in the X-axis and Z-axis was replaced. - New unit for central lubrication and new hoses. - The hydraulic unit was inspected and serviced. The drive coupling between the motor and pump was replaced. - The cooling unit was inspected and serviced; the temperature difference controller was replaced. - The clamping cylinder was fitted with new bearings and seals. - The gearbox of the A-axis was fitted with new bearings, and the coupling between the motor and gearbox was replaced. - The electrical cabinet was cleaned. - The control panel was replaced. - New screen. - New internal lighting. - The turret was disassembled, wear parts were inspected, cleaned, and re-sealed. - The turret encoder and encoder wheel were cleaned. - The length measuring systems in the X-axis and Z-axis were disassembled and cleaned. - The springs of the pickup station were replaced. - The motors of the X-axis and Z-axis were checked for bearing damage. - The panes on the work door were replaced. - The chip conveyor was completely disassembled, fitted with new bearings, cleaned, and painted. - Various small parts on the machine were also replaced, of course. The product has been described by us with the utmost care. The description is non-binding and should be verified during an inspection.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, NAKAMURA-TOME SC-100X2 Technical Specifications L-Spindle (Main Spindle): Bar capacity Ø51 mm / 6,000 rpm R-Spindle (Sub Spindle): Bar capacity Ø42 mm / 6,000 rpm Machine Features: Two tools in cut (simultaneous machining with two tools) Lower turret + 2-axis machining on R-spindle Easy-to-use Superimposed Cycle Rcsdpfx Ajy A Exkefgeh Standard Equipment: Milling and Y-axis are standard L-spindle motor: 11 / 7.5 kW R-spindle motor: 7.5 / 5.5 kW Milling motor: 7.1 / 2.2 kW / max. speed 6,000 rpm Lower turret equipped with manual unloading gripper Lubrication oil recovery system (standard specification) Environment-friendly inverter-type hydraulic unit

Condition: used, Year of construction: 2015, operating hours: 9,779 h, Tsugami HS207-5AX : Rcedpjzmwn Ajfx Afgjh Year 2015 Production hours : 9779 h Bar capacity 20mm max Swarf conveyor LNS Motorised B-axis LNS barloader Express 320 year 2017 Parts belt conveyor Fanuc command 31i Model B5 HP pump 90 bars /21l Transfomator

Condition: used, CITIZEN CINCOM R 07 VI is a high-precision CNC automatic lathe (Swiss-type) delivering strong accuracy and reliability. Capacities: 6 axes, 2 spindles; max turning Ø 7 mm, max length 40 mm, spindle bore 12 mm; threading up to Ø4 M, max tapping length 40 mm. Specs: spindle 0–16,000 rpm, 1.1 kW; back spindle up to 10,000 rpm, 0.5 kW; C-axis resolution 1°; supply 3x400 V 50 Hz, total power 4 kVA; weight ~950 kg; footprint 1465×560×1410 mm. Accessories: parts catcher, lamp, bar feeder LNS TRYTON 107, central lubrication, status light. Built to achieve tight tolerances; typical applications include automotive, watchmaking, medical, aerospace, and machine-tool components Rcsdpsyxnutofx Afgjh

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE Rcsdpfsu Uu Sysx Afgeh - Spindle power : 2.2 / 3.7 [kW] - Spindle speeds : 200 - 10000 [rpm] - Max. bar diameter : 20 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 1.5 / 2.2 [kW] - Spindle speeds : 200 - 12000 [rpm] - C axis indexing precision : 0.001 [°] * X/Z stroke : 488 / 335 [mm] TURNING-MILLING SPINDLE - X/Z stroke : 289 / 305 [mm] - Y stroke : 75 (-15/+60) [mm] - B Axis stroke : 180 [°] - B axis indexing precision : 0.001 [°] - Tool type : 15T - Spindle speeds : 300 - 30000 [rpm] - Spindle power : 3.7 / 5.5 [kW] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 24 SECONDARY OPERATION Number of positions : 4 Number of positions : 3 WEIGHT & DIMENSIONS - Machine weight : 2.700 [kg] MACHINE HOURS - Number of hours under power : 52500 [h] - Number of working hours : 11639 [h] EQUIPMENT - CNC : Fanuc 31i Model B5 - 3 colors status lamp - Coolant tank : Hydro-Fluid HP3 * with high-pressure pump : 40 - 170 [bars] - Chips conveyor - Spindle cooling unit - Parts catcher - Parts conveying strip - Bar loader : LNS EXPRESS 220 S2 - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Spindle power : 2.2 / 3.7 [kW] - Spindle speeds : 200 - 10000 [rpm] - Max. bar diameter : 20 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 1.5 / 2.2 [kW] - Spindle speeds : 200 - 12000 [rpm] - C axis indexing precision : 0.001 [°] * X/Z stroke : 488 / 335 [mm] TURNING-MILLING SPINDLE - X/Z stroke : 289 / 305 [mm] - Y stroke : 75 (-15/+60) [mm] - B Axis stroke : 180 [°] - B axis indexing precision : 0.001 [°] - Tool type : 15T - Spindle speeds : 300 - 30000 [rpm] - Spindle power : 3.7 / 5.5 [kW] Rcedpowd Ud Esfx Afgeh TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 24 SECONDARY OPERATION Number of positions : 4 Number of positions : 3 WEIGHT & DIMENSIONS - Machine weight : 2.700 [kg] MACHINE HOURS - Number of hours under power : 12249 [h] - Number of working hours : 1816 [h] EQUIPMENT - CNC : Fanuc 31i Model B5 - 3 colors status lamp - Coolant tank - Parts catcher - Parts conveying strip - Electric transformer