Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
4
stations number of slitts length 2000 mm ----- ELECTRICAL SPECIFICATIONS - total power consumption 12 kW - mains voltage 400 V - mains frequency 50 Hz Fw9vasp8k DIMENSIONS / WEIGHTS - space requirements -left/right- 2000 mm - space requirements -front/back- 1600 mm - total height 2000 mm - total weight approx. 2000 kg more
5
Polishing grinding Bock, grinding machine, polishing Bock, Doppelschleifbock, bench grinder, rack grinding machine, stand grinding Bock Drive 1.5 kW Speed 1500 rpm Polishing discs max 300 x 30 mm Dimensions 1170/420/H1100 mm Weight 152 kg Myfz2 more
5
Fine dust extraction filter de-dusting plant extraction with fan motor for 32 filter with pipes, filter clamps and channels Motor: 380/660 volts, 4 kW, 1430 RPM The plant originates from the jewellery industry and was employed as a Entsctaubung for 10 polishing courses. It was cleaned and the filter socks were brought due to the gold dust in the refinery. (Maybe there and there is some gold dust is available.) The system worked flawlessly until the removal, but sold without warranty or gua... more
4
For sale is a used polishing Bock / belt sander of the company Rema in very good condition. Technical data: 2 x 4 kW motors, split spindle shaft with belt drive, amp: 8.5/rpm: 500-1500 in the display read 8ch8cchut Connection: 400 Volt wave height: 60 cm shaft diameter: 25 mm dimensions: 180 cm wide 160 cm depth 70 cm weight: approx. 300 kg 2 x Toshiba Freqenzumrichter the polishing is used and is in excellent condition both optically and technically. Original lacquer is not nachlackert ... more
1
175x 25 x 16 mm turning speeds 2850 U/min voltage 230 V total power requirement 0,45 kW weight of the machine ca. 16 kg dimensions of the machine ca. 630 x 175 x 250 mm Bakrcmxzcg Emergency Switch more
3
Fully automatic line wit two rotary tablesWorking width 1000mmproduction 2000pcs per hourfor spoons and forks Encle2b more
6
stations number of slitts length 2100 mm ----- ELECTRICAL SPECIFICATIONS - mains voltage 400 V - mains frequency 50 Hz DIMENSIONS / WEIGHTS - space requirements -left/right- 2100 mm - space requirements -front/back- 2600 mm - total height 2400 mm - total weight approx. 2300 kg AUTOMATIC REVOLVING MACHINE IN MONOBLOCK DESIGN WITH 12 CNC-AXIS FOR COMPLETE 3D-PROCESSING -----... more
4
Polishing wheel grinder, grinding machine, polishing machine, double bench grinder, bench grinder, stand grinder, bench grinder stand-drive 2 kW Speed ​​2800 r / min Dimensions 1200/270/H720 mm Weight 150 kg Ql8hbnw8d more
4
wheel diameter: 780 mm table height above floor: 800 mm Table dimensions: 890x190 mm grinding table: inclination: neigbar Grad total power requirement: ca. 2,0 kW weight of the machine ca.: 0,2 t space requirements of the machine approx.: L:1,2xB:1,05xH:1,3 m Double Disc Grinding Machine its based on a molding machine body foundation as a whole. application range: metal, wood, plastic ginding disc surface diameter:680mm S8u79gpta grinding disc material: sand paper sucction noozle: 80x120mm more
4
For sale is a used polished buck of the company Rema in good condition - original paint - with suction & suction hoods. Technical data: PS: 3 amp.: 5.1 rpm: 1450 connection: 400 Volt wave height: 960 mm shaft diameter: 20 mm total height: 1130 mm total width: 990 mm depth: 500 mm weight: 200 kg max. 300 mm disc diameter motor-protective circuit installed the polishing Bock is used and is in excellent condition both optically and technically. We have measured the motor, all phases are fine an... more


Polishing ...
every day

New machines via email!

Be informed!
5
- CNC regulated flat polishing machine from SHL - motor 30 kW - shaft diameter 60 mm - working width 500 mm - buff wheel width max. 520 mm / buff wheel diameter max. 500 mm - oscillating buff wheel - CNC regulation from Schleicher, new Baw2yknqkr - controll box We do not have the table anymore because it was a custom product (dimension 17500 x 2200 mm) - shown at the pictures - we will deliver the machine without a table. more
2
Spindle taper for collets W25 Speed 2000 rpm. Gtoexc With exhauster MARCELS MASCHINEN CH more
2
CNC polishing machine manufacturers: extrude hone AFM Type: Orbitex 600 Year of construction: 2001 Technical details Table: 600 x 600 mm Dimensions: 1220 x 1525 x 2745 mm Weight: 5000 kg Qj20znsd Workpiece weight: 100 kg more
5
We are selling a barely used in the sales order Trailing finish machine (deburring, polishing, grinding etc.) consisting of dry machining: -Cylindrical container made of stainless steel (nominal volume ca 300 l) with drain valve -Quick clamps on rotor plate to the recording of 6 tool holders - electromagnetic 2-spindle with linear bearings for immersion movement of the roitierenden holder -Stable machine frame made of aluminum profiles 100 x 100 mm -Loading and unloading loading door -... more
4
Rema DP15 polishing Bock 0.9/1,3KW, 2-speed 1450/2900 RPM The polishing Bock is in good condition both optically and technically. We have measured the motor, all phases are fine and evenly pull power. including suction hoods. Mtxwto Technical data: 0.9/1,3KW 400V 1450/2900 rpm of Max 250 mm disc diameter 50 mm clamping width pad 20 mm shaft diameter 800 mm wave height 950 mm machine width hood height 300 mm cover width 100 mm Dimensions of the system: Height 80cm width 95cm depth 45... more
6
DOUBLE SURFACE GRINDING "DISKUS" DDS 457 R Manufacturing with/without acc. 4700/4000 kg Dimensions 3700x2000x2550 mm Total power Custom position 8460.29 20 TECHNICAL DATA Grinding-wheel dia. 457 mm Grinding capacity 1 to 20 mm Winding width 10 to 60 mm Grinding wheel adjustment on each side 150 mm Discus grinding wheel 457 x 75 x 76 mm Total required power 32 to 42 HP Grinding procedure infeed grinding Grinding-wheel spindle 2 vertical sp... more
3
Polishing disks diameter: 350 mm Footprint: On pallet 1200 x 800 mm Baaf8y3exf Projection right/left: 330 / 230 mm Shaft diameter: 80 mm or 100 mm?) Speed: Connection: Accessories/equipment: condition: good Weight: Dimensions: 1.200 x 1.200 x 1.200 mm more
6
Polishing machine / tow grinding machine Manufacturer: Walther Trowal Type: M-TMD 6/2 Bvghszxfy Year of manufacture: 2007 Main drive (RPM) speed: 10-50 Clamping stations (RPM) speed: 5-15 Maximum immersion depth (mm): 350 Maximum workpiece diameter (mm): 3-30 Dimensions (mm) (Hxwxd): 2,100 x 1,800 x 2.800 Weight (kg): 2,580 .. more
4
Tip height 120 mm Part length of 10-400 mm Brm0gm2i . -motor driven both top -left recording laterally -right clamp, spring loaded return via train and foot pedal -two-speed -additional ceramic tips . Dimension approx. 1.5 x 0.6 m Estimated to have weighed 0.2 more
6
special machine for ball polishing Xpr9ydfkm Machine comes from the resolution of a special fitting manufacturer ball diameter: 60 - 250 mm The machine works. There are signs of wear. A visit is useful and possible with an appointment. more
1
Cosma polisher in fit condition. Assembly with different possible media. Send us an inquiry with the requirements and We offer a complete 3hcolrtdd more
6
Here we offer a Struers from Ramin polishing machines. Struers from Ramin polishing machines Number 03946146 Manufacturer of Struers Type the Ramin Machine data Ssqdic L x W x h: approx. 800 x 550 x 650 mm Weight: 121 kg Technical data Polishing discs ø: approx. 320 mm Maximum workpiece height: approx. 30 mm Speed grinding disc: 150 & 300 RPM Type: off Ramin 03946146 Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, informat... more
1
Used polishing machine for manual editing For polishing wheels Ø1000 mm x 120 mm wide. Manual Drezahlaenderung. Ueldsahci On request the extension with a frequency inverter: 1 piece FU, 1 potentiometer for regulating; 1 main switch more
6
Make: METABO Working table: 830 mm On the table is a device installed to unscrew. complete polishing machine touch switches, cam and switch control to depart different contours. The polishing arm is mechanically adjustable in height and angle adjustable via the crank The polishing area is very well suited for large parts and small parts The machine can also polish over the table also The polishing machine is pneumatically controlled electric spindle motor Power: 4.4 kW Buerstenaufsetze exchangea... more
1
Automatic universal shaft polishing machine working width 1000mm for polishing of edges Bauifpg of cutlery and similar shaped parts weight 2200kg more
5
wheel diameter 125 mm chuck Roehm 125 mm M3n7bt total power requirement 0,3 kW weight of the machine ca. 0,3 t dimensions of the machine ca. 0,4 x 0,4 x 1,4 m more
1
KED polisher in fit condition. 2qop8pk The machine can be equipped with different media. Send us an inquiry with the requirements and we will send Them a complete range more
2
Rack by hand cross adjustable: 380 V, 2800 rpm: 600 mm spindle height adjustable on column by hand: 1200 mm hydraulic automatic vertical travel: 900 mm hydraulic automatic Qürbewegung: 200 mm greatest distance between table and spindle taper (long spindle): 600 mm Drive motor 5.5 kW table: 550 mm footprint: 1600 x 1200 x 3200 mm Weight approx .: 1.2 t hydraulic: 2.2 kW; Space required: 800 x 800 x 1200 mm; Weight approx 300 kg .: Cbqlkfnk more
2
It is sold a double polishing machine. Manufacturer: Arens polishing hoods are available. Yg7aznmfa more
5
Double-sided polishing machine Fabr. REMA type DPN Serial No. 33217 Technical data: Length 1320 mm Dimensions L x W x H 1320 x 350 x 750 mm Wellendrm. 43 mm 2.6 kW Mwsnf Electr. Connection 380 V with: -1 brush -1 polishing wheel used, in good condition more
2
Double shaft polishing machines Brand Hauschild Germany for pre and mirror polishing of spoons forks and knifes working width 1000mm 3wdye8o3 automatic process with automatic application of compound 3 machines with assesories more
3
Drive type: el / mech.,. Throat depth: 300 mm, Shaft diameter: 45 mm, Rpm: 850/1500/2500, Drive: 3.0 kW, Comment:. Mobile,. Bmc8gloo removable protective covers, Weight: 250 kg more
3
Polishing / buffing machine HAU HR 4 for circular parts up to 200 mm max., with 2 working units, units equipped with reconditioned spray systems for liquid polishing compound, wheel diam. max. 400 mm, width polishing wheel max. 120 mm, shaft diam. 35 mm, machine similar to picture Ukoeq9ng more
1
Coordinate adjustment of the stand by hand: 350 and 600 mm height adjustment of the polishing headstock to the column:.. 900 mm kl / gr. . Spacing between table and spindle polishing (with extended spindle): 450/800 mm Spindle speed: 2800 rpm drive Engine: 220/380 V, 2870 rpm, 5.5 kW table: 280 mm Table Size: 1200 x 800 x 800 mm Table weight: ca . 200 kg space for rack setup ca .: 1250 x 900 x 2600 mm, 700 kg Space requirement for separate hydraulic: 600 x 600 x 1200 mm, about 200 kg space for c... more
2
It sold two double polishing bucks. Manufacturer: Pensel Motor power: 4 kW polishing hoods are available. Yg7ap3gq9 more
6
Hau rotary indexing table with 6 working spindles and 4 or 5 polishing units PE 3 or PES 3 fpor polishing wheels D 450 mm and width max. 400 mm with max. 15 KW engines Cc2vp7nt general overhault with new electro cabinet more
2
Polishing agent carrier max. 2,5 kg, small stroke stroke frequency 0-2000 / min, rotary movement 0-2000 / min (slow switchable), large stroke 0-60 mm, contact pressure 0-100 N infinitely variable, height adjustment max. 230 mm, height between polishing support and clamping surface 190 - 420 mm, projection 370 mm, polishing head tilting 0 - 90 ° infinitely variable, with coordinate 255 x 530 mm, good condition Cy3nzn7i more
5
Pzq3nzqyuVIBRATOR "TROWAL" TYPE CV-125 with retractable cap more
2
Indexing table HAU RK 6-800, 6 work piece spindles, 3 polishing units, more details and inspection on request V2thk7 more
1
Coordinate adjustment of the stand by hand: 350 and 600 mm height adjustment of the polishing headstock to the column:.. 900 mm kl / gr. . Spacing between table and spindle polishing (with extended spindle): 450/800 mm Spindle speed: 2870 rpm drive Engine: 220/380 V, 2870 rpm, 5.5 kW table: 280 mm Table Size: 1200 x 800 x 800 mm Table weight: ca . 200 kg space for rack setup ca .: 1250 x 900 x 2600 mm, 700 kg Space requirement for separate hydraulic: 650 x 600 x 1200 mm, about 200 kg space for c... more
4
Used Rotary indexing table-polishing machine Niederberger Made in Switzerland 3nowtnqap Rotary indexing table with 20 work spindles and 4 polishing stations with high pressure guns, 7.5 kW motors, automatic height adjustment, control cabinet. more
6
table polisher with pressure controlled servo z axis and 11 KW polishing engine Siemens S7 controller and touch screen panel SEW Eurodrie inverter and servo controller 8hty3rerg more
5
Single-suction apparatus for polishing work. From leading manufacturers KaVo. 220 V, 360 W. The devices are in good condition. We have 7 St. in inventory. Uutucuk30 more
6
Surface Grinding Machine/Metal polishing machine SILLEM 199+ was manufactured by the machine manufacturer SILLEM. Machine SILLEM 199+ was built in 1995 year. Wlhwk Equipment: Technical documentation more
6
2noigo3fIndexing table HAU RK 6-1200, 6 work piece spindles and 4 polishing units type PES, 11 kW each, max. width polishing wheel 300 mm, incl. oscilation, electr. driven hight adjustment, liquide compound feeding system (spray guns + pressure tank, control cabinet Price and additional information on request. more
1
Coordinate adjustment of the stand by hand: 350 and 600 mm height adjustment of the polishing headstock to the column:.. 900 mm kl / gr. . Distance between table and spindle polishing (with extended spindle.): 450/800 mm Spindle speed: 2800 rpm drive Engine: 220/380 V, 2870 rpm, 5.5 kW table: 280 mm Table Size total: 1200 x 800 x 800 mm table weight : 200 kg space for rack setup ca .: 1250 x 900 x 2600 mm, 700 kg Space requirement for separate hydraulic: 600 x 600 x 1200 mm, about 200 kg space f... more
6
Used rotary table polishing machine, also for brushing, grinding, finishing, etc. suitable for sale, - consisting of: round table (cycling) Make Gents Model RKS 6/1300 (6 workpiece carrier mounted in a partial circle of 1300mm) Description: The clocking working round table consists of a table drive with pedestal and built tabletop. The table top has a conservatively designed storage to ensure a vibration-free operation. The table switching time is constant. The spindles with the workpiece holder... more
2
robot polishing unit fuer wheels with diameter 1000 mm with automatic wheel wear compensation, 11 KW engine, more details on request S9jn7solz more
4
Polishing wheel diameter: 400 mm Footprint: 400 mm diameter projection on both sides: 350 mm Shaft diameter: 40 mm Speed: Connection: Accessories / equipment: Condition: good Weight: 0.4 t body proportions: 1200 x 400 x 800 mm Kyooyupz more


Polishing ...
every day

New machines via email!

Be informed!

to

to

Change search

SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close