Used Table Polishing Machine for sale (104,242)

Condition: reconditioned (used), Round table polishing machine make Bula, model MP81 for sale. Continuously turning machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of the polishing wheels. Polishing shaft diameter 25 mm Iodpfx Aelccvmscujtn The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Subject to prior sale. Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 1 high-pressure dosing pistol WIDOBERG HDP-2, brackets, timer, etc. and pressure container.

Condition: good (used), machine/vehicle number: RTT HAU T3, Used rotary table polishing machine Manufacturer: Hau Itjdpfxeh Ug Ulo Acusn Rotary table with 6 working spindles and 3 polishing stations with high pressure guns, 5,5 kW motors, control cabinet

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1000 (maximum part processing length 1000 mm, respectively), with 1 PES/3 polishing station and a control cabinet. Itjdjw Avptspfx Acusn The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Condition: good (used), Used rotary indexing table polishing machine Manufacturer: Hau Iodoqmfv Sepfx Acujtn Rotary indexing table with 6 work spindles and 3 polishing stations with oscillation and high-pressure guns, 5.5 kW motors, gripper clamping system, switch cabinet

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1500 (maximum part processing length 1500 mm), with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. Itjdpfx Asw Au A Ejcujn + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Condition: like new (used), functionality: fully functional, Year of construction: 2016, Machine for washing and polishing potatoes, carrots and celery. Isdpfxewlq N Hs Acujtn Pro-Vega MV-1428R 2016 year Slightly used, the machine is like new We speak English, we speak Deutsch

Condition: new, Year of construction: 2024, functionality: fully functional, Automatic Polishing Machine Sanyi SY-T200 year 2024 The SY-T200 is a closed internal circulation sandblasting machine designed for the surface treatment of hard alloy tool workpieces. It operates using a negative pressure jet blasting method, where compressed air draws in abrasive material to efficiently process surfaces. The machine features an independent dust extraction and filtration system that minimizes dust pollution and allows abrasive reuse, ensuring cost-effectiveness and environmental protection. Its structure includes a working chamber, rotating worktable, spray gun group with lifting mechanism, dust removal system, and electrical control unit. Itedpfewcftbex Acuen

Condition: new, Year of construction: 2025, Sturdy cast iron steel construction Large dimensioned milling unit made of cast iron, swivels up to -45° backwards Indication of the milling speeds by LEDs Fast, trouble-free speed change via eccentric voltage Right-left rotation Display of height and inclination 1/10 mm accurate Milling fence in heavy professional design: with fine adjustment via toothed rack, with numerical display, aluminum stop jaws, 3-fold positionable for fast repetition of the adjustment TECHNICAL DATA Suction connection suction port diameter 2 x 120mm working table working table length 2500mm Working table width 655mm Electrical data Supply voltage 400V Mains frequency 50Hz Power drive motor 5,0kW Milling spindle spindle inclination 0 - -45 useful length of the spindle 125mm Spindeldrehzahl(en) 3500/6000/8000/10000min¯¹ spindle mandrel diameter 30mm Milling tool diameter max. tool diameter max. 240mm tool diameter max. lowerable 230mm tool diameter max. profile milling 210 - 240mm tool diameter max. tenon milling 320mm SUPPLY Aluminum milling stop jaws Arch milling protection hood Isdpfx Acoiidnfsuotn Motorized height adjustable and swiveling milling spindle Digital display of the set values Speed display on the machine front via LED Table extension left and right Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 0263, type of input current: three-phase, Equipment: rotational speed infinitely variable, FOR SALE: 2015 INTEC Fully Automated Robotic Linish and Polish Cell – 3 x ABB IRB 2600 Robots – Medical Device Spec Available now from Used Machine Tools Ireland Ltd – this 2015 INTEC Robotic Linishing and Polishing System offers a fully automated, high-precision surface finishing solution, ideal for manufacturers in medical devices, aerospace, automotive, and precision engineering. Now Dismantled and Available for Immediate Delivery Includes 3 x ABB Robots 3 x Polishing Stations 2 x Transfer Stations 3 x Control Stations Full Enclosure Fire Suppression System 🔧 Technical Specifications: Robots: 3 x ABB IRB 2600 M2004 Industrial Robots (20kg payload, 1.65m reach – versatile, high-speed, proven performers) Stations: Station 1: Rough Linishing Station 2: Intermediate Polishing Station 3: Final Finishing Transfer System: Includes 2 x integrated robotic transfer stations for seamless part handover Enclosure: Full safety enclosure with external part loading and removal hatch Control System: Allen Bradley PLC controls with user-friendly interface Cycle Process: Operator loads part externally Robot 1 picks and linishes at Station 1 Transferred to Robot 2 for intermediate polish Then passed to Robot 3 for final finish Finished part exits via removal hatch ✅ Condition: Very Good Used Condition Service History: In operation within a clean medical device facility until July 2025 Itsdpfx Ajw Amntecusn Fully maintained and operational at time of decommission 🌍 Key Features: High throughput and repeatability Ideal for aluminium, stainless steel, titanium and other precision parts Reduces manual handling and variability Complete end-to-end automated surface finishing Perfect upgrade for companies moving to Industry 4.0 and robotic automation 📦 Location: Ireland – Available for immediate inspection Used robotic polishing cell, automated linish machine for sale, ABB IRB 2600 robot polishing line, medical device finishing machine, robotic finishing system, automated surface treatment robot, used polishing machine with enclosure, robotic polishing cell Ireland, ABB polishing robot system for sale

Condition: good (used), Year of construction: 2014, For sale are 2 identical injection molding machines of the company Netstal and the type SynErgy 2000-230/110 The machines were in production until the last day The company from which these machines originate attaches great importance to maintenance and servicing, which is why the machines are in very good condition 2 K function Turntable Designation Netsal SynErgy 2000 Clamping force in kN 2000 Machine drive power in kw 45 Year of construction 2014 Operating hours 20209 Weight 13300kg Length 6901mm Width 2075mm Height 2240mm plus 800mm flow box Cylinder size AG1 20mm Cylinder sizeAG2 16mm _____ Designation Flow Box Type LMP 105 Manufacturer Max Petek Serial number S 140743 Year of manufacture 2014 _____ Can be purchased additionally: Krauss - Maffei MH 50 robot Designation 6 -axis: Yaskawa Type: DX 100 Operating hours approx. 8900 Year of construction 2014 The systems can be purchased complete or in individual parts Prices plus value added tax Ijdpfxskwb Dij Acustn Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), IMM 72780 Double-sided polishing machine Mint condition, the machine has hardly been used. TECHNICAL DATA Polishing wheel: 100 - 500 mm shafts: 35 mm Spindle speed: 1500 rpm Voltage: 400 V, 50 Hz Weight of basic machine: Approx. 400 kg Ijdpju Hanyefx Acuotn No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 1737.57 € 10 mm B 16 180 mm 250 - 3000 U/min 0,45 (230V) kW 400 mm 248 mm 460 mm 30 kg 50 mm 105 - 245 mm 300 x 200 mm 50 mm Continuous/normal drilling performance 10/12 (in E335/ST60) Manual feed Digital speed display Robust, high quality and inclined rotation hood for easy speed reading LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Undervoltage release Drill protection with electr. Fuse Connection cable with Schuko plug (1.2 m) 3 years warranty for single shift operation OPTIONS: Machine cabinet with door and drawer Iedpsxpraxofx Acuetn Drill package 2 (vice & keyless chuck)

Condition: used, Year of construction: 2009, Manufacturer : VDI Type: Accumulation table Year : 2009 Automatic unit counting / detection system. Iodpfx Acjvlzlgouotn Belt width : 20 cm Plate size : 80 x 120 cm

Condition: new, Year of construction: 2025, Sturdy cast steel construction With rigid milling spindle 3 spindle speeds 3500 to 10000 min¯¹ Milling spindle with right-left rotation Large dimensioned milling unit made of grey cast iron, directly mounted to the table With suction hood under the worktable for better extraction Solid and precise cast iron table Quick and easy speed change Powerful motor with 5,0 kW Standard arc milling protection hood Quality Made in Italy Equipment details Cast iron milling unit Directly mounted on the milling table Milling spindle mounted high up with precision ball bearing, thus lowest possible bearing load and longest possible service life 3 milling speeds from 3500 to 10000 min¯¹ Powerful motors equipped with powerful three-phase motor Milling guard The standard milling guard is equipped with a height-adjustable guide rail and guard plate as standard for maximum safety. Milling fence Precise milling fence with a quick adjustment and a fine adjustment with scale on the fence jaw. The integrated suction connection ensures a clear view Milling table opening A large milling table opening also allows the use of larger flattening cutters and tenoning and slotting tools above and below the table Curved milling protection hood Isdpfohp Rcrsx Acujtn Included as standard Reversible fence jaws versatile integratable stop for bridging the tool gap enables safe working even with narrow workpieces TECHNICAL DAY

Condition: excellent (used), Kolbe stainless steel bandsaw Heavy duty roller table used for carcass's Model K430 H Table size 1,050 mm front to back Width 830 mm Maximum cut height 480 mm Itodsxpflujpfx Acuon Safety interlocked doors Braked motor 4 Kw

Condition: good (used), Year of construction: 2012, For sale are 2 identical injection molding machines of the company Netstal and the type SynErgy 2000-230/110 The machines were in production until the last day The company from which these machines originate attaches great importance to maintenance and servicing, which is why the machines are in very good condition 2 K function Turntable Designation Netsal SynErgy 2000 Year of construction 2012 Operating hours 28828 Weight 13300kg Clamping force in kN 2000 Injection unit 230 Machine drive 45 kW drive power Length 6901mm Width 2075mm Height 2240mm Cylinder size AG1 20mm / 32mm Available Cylinder sizeAG2 25mm / 32mm Available ____ Handling Wittmann, can be purchased additionally Serial number W833PRO - 0284 Itodpfjkv Uq Ijx Acuen Operating hours approx. 13000h Year of construction 2016 Outfeed conveyor at the bottom Width 400mm Length 2300mm The systems can be purchased complete or in individual parts Machines already dismantled Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 92ML/109/11821, rotary table diameter: 1,220 mm, grinding height: 572 mm, total width: 4,394 mm, total length: 3,353 mm, overall weight: 13,700 kg, grinding wheel diameter: 711 mm, spindle speed (max.): 550 rpm, power: 35 kW (47.59 HP), table diameter: 1,219 mm, Lumsden 92 ML Vertical Spindle Rotary Surface Grinder , 48 Inch dia chuck, autosizing, table jog facility, Filtermist unit fitted with (2) extraction vents to rear of table guards, fitted with segmented wheel, serial number 92ML/109/11821. Machine tools manuals. Coolant filtration tank. Also with unused grinding stones segmented. Itsdpfx Asxgq D Djcuen Table Diameter 48″ / 1219mm, Segmental Wheel Dia. 28” / 711mm, Max. Height Capacity 22.5″ / 572mm, Spindle Speed 550rpm, Table Speed 6 & 18rpm, Auto Feed 0.004-0.04 ins/min – 0.1-1.0 mm/min, Spindle Motor 50HP / 35Kw, Floor Space 14′ x 11′ / 4394 x 3353mm, Approx. Net Weight 12T/12200Kg, Approx. Gross Weight 13.5T /13700Kg1220

Condition: used, Year of construction: 2017, Type: CNC Polishing Machine Manufacturer: Diema Model: CNC-Maxi Year of Manufacture: 2017 Serial Number: 22.003 Isdpfx Acexnmtdjustn Condition: Used Quantity: 1

Condition: good (used), Code: 0118 Brand: DE STEFANI Model: MV Automatic polishing machine for edges for polishing polyester, polyurethane and other paints Features: Track drive system with rubberized skids Manual upper presser with rubberized wheels Adjustable support bar for wide pieces Composition: 1° Group - N° 2 adjustable brushes - Motor Hp 4 Itodpfx Acewiv Dkeuon 2° Group - N° 1 Brush - Motor Hp 2 Working surface height mm 870 Feed speed 5 to 25 mt/min Working length min mm 150 Working height min/max mm 10/100 Working width min 50 Protection cabin Electrical cabinet Overall dimensions mm 2700 x 1000 x 1250 h Weight kg 1500

Year of construction: 2025, condition: new, functionality: fully functional, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge - Fiber laser 20 Watt (Optional: 30 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with anti-trap protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm Itedpew Et Ilefx Acusn - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: ready for operation (used), Year of construction: 2005, Immediately available from site: CNC Cylindrical Grinding Machine TOS HOL – MONTA Type UN 63 / 750 / 2000 Year of manufacture: 2005 CNC Control: Sinumerik 840 Di Centre height: 375 mm Grinding diameter: 750 mm Grinding length: 2000 mm Grinding wheel dimensions: 750 x 100 x 305 mm Swing diameter in open steady rest: 40 – 250 mm Tailstock Morse taper: 6 Table swivelling: 4 degrees Workpiece spindle speed range: stepless, 1 – 50 rpm Itsdpfxexn R E Rs Acuen Grinding wheel speed: 20 – 33 m/sec Grinding spindle motor: 19 kW Total power requirement: 41 kW Workpiece diameter control Full enclosure Grinding mist extraction Weight: 20 t Complete accessories Price: EUR 28,500.— plus VAT, ex site

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,600 mm, table load: 10,000 kg, spindle diameter: 130 mm, spindle speed (max.): 2,500 rpm, table length: 1,500 mm, table width: 2,000 mm, travel distance W-axis: 700 mm, Lazzati HB130T boring machine featuring: Isdexiv D Uopfx Acustn - Table size: 1500 x 2000 mm - Maximum allowable load: 10 tons - X-axis travel: 4000 mm - Y-axis travel: 2000 mm - Z-axis travel: 1600 mm - W-axis travel (quill travel): 700 mm - Spindle diameter: 130 mm - Spindle speed: 2500 rpm - Tool clamping system: Hydraulic - Tool holder: ISO 50 - CNC Control: Heidenhain 426 Interest-free payment terms available over 12 or 24 months.

Condition: used, Year of construction: 1967, functionality: fully functional, Table milling machine / spindle moulder type SFM/2 Series C, year of manufacture 1967, with 45° tiltable milling spindle, Aigner integral fence, single-sided table extension with anti-kickback block, manual spindle lock by turning the locking knob, weight 950 kg, Roma 130 power feed with new feed rollers, 0.29 kW, 380 Volt, 5.5 HP, 5-75 – 10-15 m/min. Includes accessories such as: clamping bar for insert cutters, Aigner table extension, bottom milling fence with guide ring, Roma 130 power feed unit. Machine is subject to differential taxation. Iedoxf Hvaspfx Acujtn

Condition: good (used), Year of construction: 2004, Ref. -No.: 10520 Manufacturer: TOS VARNSDORF Type: WHNQ 13 CNC Year of construction: 2004 Type of control: CNC Control: HEIDENHAIN TNC 430 Storage location: Halberstadt Country of origin: Czech Republic Machine-No.: 23XX X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 1250 mm W-Axis: 800 mm Table Load: 12.500 kg Clamping Area: 1800 x 2500 mm Tool Taper: SK 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 3.000 RPM Itjdpfx Asw Nmw Hjcuen Max. Torque: 3323 Nm Rapid Travel X/Y/Z: 10000 mm / min Drive Capacity - Spindle Motor: 37 / 1500 kW Weight Of The Machine Ca.: 40 t Further information: - Tools + accessories - Angle head - Angle up to 2.5m - Chip conveyor - 3D measuring probe - Clamping device Machine is still in production and can be inspected under power by arrangement.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 2,200 mm, table load: 15,000 kg, spindle diameter: 130 mm, spindle speed (max.): 3,000 rpm, table length: 2,500 mm, table width: 1,800 mm, spindle stroke: 800 mm, Tos Varnsdorf WHQ 13 CNC boring mill with: - X-axis travel 5000 mm - Y-axis (vertical) travel 3000 mm - Z-axis (cross) travel 2200 mm - W-axis (quill) travel 800 mm - rotary table size 2500 x 1800 mm - Heidenhain iTNC 530 CNC control - spindle speed 3000 rpm - 60-position tool magazine - high pressure through-spindle coolant - hinged belt chip conveyor - standard accessories included - year of manufacture 2012 - year of installation 2017 0% financing over 12/24 months available Ijdpfxowtmvxo Acustn